Received-SPF: pass (google.com: domain of linux-wireless+bounces-2433-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45e3:2400::1 as permitted sender) client-ip=2604:1380:45e3:2400::1;
From: Ping-Ke Shih <pkshih@realtek.com>
To: <kvalo@kernel.org>
CC: <linux-wireless@vger.kernel.org>
Subject: [PATCH 6/6] wifi: rtw89: 8922a: set chip_ops FEM and GPIO to NULL
Date: Wed, 24 Jan 2024 11:38:13 +0800
Message-ID: <20240124033813.12562-1-pkshih@realtek.com>
In-Reply-To: <20240124033637.12330-1-pkshih@realtek.com>
References: <20240124033637.12330-1-pkshih@realtek.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain

The chip_ops::fem_setup is to get if a hardware module type contains PA
and LNA that will affect how RF calibrations do. The chip_ops::rfe_gpio
is to set GPIO PIN MUX according to hardware module type too. 8922A
doesn't have these special module types yet, so leave them as NULL.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
 drivers/net/wireless/realtek/rtw89/rtw8922a.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/realtek/rtw89/rtw8922a.c b/drivers/net/wireless/realtek/rtw89/rtw8922a.c
index 6de3c0f8d83a..aefad3f2e612 100644
--- a/drivers/net/wireless/realtek/rtw89/rtw8922a.c
+++ b/drivers/net/wireless/realtek/rtw89/rtw8922a.c
@@ -1620,6 +1620,8 @@ static const struct rtw89_chip_ops rtw8922a_chip_ops = {
 	.set_channel		= rtw8922a_set_channel,
 	.read_efuse		= rtw8922a_read_efuse,
 	.read_phycap		= rtw8922a_read_phycap,
+	.fem_setup		= NULL,
+	.rfe_gpio		= NULL,
 	.power_trim		= rtw8922a_power_trim,
 	.set_txpwr		= rtw8922a_set_txpwr,
 	.set_txpwr_ctrl		= rtw8922a_set_txpwr_ctrl,
-- 
2.25.1