Received-SPF: pass (google.com: domain of linux-wireless+bounces-4004-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
From: Kalle Valo <kvalo@kernel.org>
To: Baochen Qiang <quic_bqiang@quicinc.com>
Cc: <ath10k@lists.infradead.org>,  <linux-wireless@vger.kernel.org>
Subject: Re: [PATCH] wifi: ath10k: poll service ready message before failing
References: <20240221031729.2707-1-quic_bqiang@quicinc.com>
Date: Mon, 26 Feb 2024 12:45:37 +0200
In-Reply-To: <20240221031729.2707-1-quic_bqiang@quicinc.com> (Baochen Qiang's
	message of "Wed, 21 Feb 2024 11:17:29 +0800")
Message-ID: <874jdvld0u.fsf@kernel.org>
User-Agent: Gnus/5.13 (Gnus v5.13) Emacs/28.2 (gnu/linux)
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain

Baochen Qiang <quic_bqiang@quicinc.com> writes:

> Currently host relies on CE interrupts to get notified that
> the service ready message is ready. This results in timeout
> issue if the interrupt is not fired, due to some unknown
> reasons. See below logs:
>
> [76321.937866] ath10k_pci 0000:02:00.0: wmi service ready event not received
> ...
> [76322.016738] ath10k_pci 0000:02:00.0: Could not init core: -110
>
> And finally it causes WLAN interface bring up failure.
>
> Change to give it one more chance here by polling CE rings,
> before failing directly.
>
> Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00157-QCARMSWPZ-1
>
> Fixes: 5e3dd157d7e7 ("ath10k: mac80211 driver for Qualcomm Atheros
> 802.11ac CQA98xx devices")
> Reported-by: James Prestwood <prestwoj@gmail.com>
> Link:
> https://lore.kernel.org/linux-wireless/304ce305-fbe6-420e-ac2a-d61ae5e6ca1a@gmail.com/
> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>

[...]

> +		/* Sometimes the PCI HIF doesn't receive interrupt
> +		 * for the service ready message even if the buffer
> +		 * was completed. PCIe sniffer shows that it's
> +		 * because the corresponding CE ring doesn't fires
> +		 * it. Workaround here by polling CE rings once.
> +		 */
> +		ath10k_warn(ar, "failed to receive service ready completion, polling..\n");
> +
> +		for (i = 0; i < CE_COUNT; i++)
> +			ath10k_hif_send_complete_check(ar, i, 1);
> +
> +		time_left = wait_for_completion_timeout(&ar->wmi.service_ready,
> +							WMI_SERVICE_READY_TIMEOUT_HZ);
> +		if (!time_left)
> +			return -ETIMEDOUT;

I think it would be user friendly to also print the end result for the
polling, for example something like this:

if (!time_left) {
        ath10k_warn(ar, "polling timed out");
	return -ETIMEDOUT;
}

ath10k_warn(ar, "service ready completion received, continuing normally");

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches