Received-SPF: pass (google.com: domain of linux-wireless+bounces-5385-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.48.161 as permitted sender) client-ip=147.75.48.161;
From: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
To: <ath12k@lists.infradead.org>
CC: <linux-wireless@vger.kernel.org>,
        Pradeep Kumar Chitrapu
	<quic_pradeepc@quicinc.com>,
        Muna Sinada <quic_msinada@quicinc.com>
Subject: [PATCH v2 03/10] wifi: ath12k: push EHT MU-MIMO params from hostapd to hardware
Date: Wed, 27 Mar 2024 10:09:03 -0700
Message-ID: <20240327170910.23975-4-quic_pradeepc@quicinc.com>
In-Reply-To: <20240327170910.23975-1-quic_pradeepc@quicinc.com>
References: <20240327170910.23975-1-quic_pradeepc@quicinc.com>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain

Currently, only the EHT IE in management frames is updated with
respect to MU-MIMO configurations, but this change is not
reflected in the hardware. Add support to propagate MU-MIMO
configurations to the hardware as well for AP mode. Similar
support for STA mode will be added in future.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Co-developed-by: Muna Sinada <quic_msinada@quicinc.com>
Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
---
 drivers/net/wireless/ath/ath12k/mac.c | 50 +++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath12k/wmi.h | 21 +++++++++++
 2 files changed, 71 insertions(+)

diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 9921303dc5fa..6465dc11a92e 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -2508,6 +2508,50 @@ static int ath12k_mac_vif_recalc_sta_he_txbf(struct ath12k *ar,
 	return 0;
 }
 
+static int ath12k_mac_set_eht_txbf_conf(struct ath12k_vif *arvif)
+{
+	u32 param = WMI_VDEV_PARAM_SET_EHT_MU_MODE;
+	struct ath12k *ar = arvif->ar;
+	u32 value = 0;
+	int ret;
+
+	if (!arvif->vif->bss_conf.eht_support)
+		return 0;
+
+	if (arvif->vif->bss_conf.eht_su_beamformer) {
+		value |= u32_encode_bits(EHT_SU_BFER_ENABLE, EHT_MODE_SU_TX_BFER);
+		if (arvif->vif->bss_conf.eht_mu_beamformer &&
+		    arvif->vdev_type == WMI_VDEV_TYPE_AP)
+			value |= u32_encode_bits(EHT_MU_BFER_ENABLE,
+						 EHT_MODE_MU_TX_BFER) |
+				 u32_encode_bits(EHT_DL_MUOFDMA_ENABLE,
+						 EHT_MODE_DL_OFDMA_MUMIMO) |
+				 u32_encode_bits(EHT_UL_MUOFDMA_ENABLE,
+						 EHT_MODE_UL_OFDMA_MUMIMO);
+	}
+
+	if (arvif->vif->type != NL80211_IFTYPE_MESH_POINT) {
+		value |= u32_encode_bits(EHT_DL_MUOFDMA_ENABLE, EHT_MODE_DL_OFDMA) |
+			 u32_encode_bits(EHT_UL_MUOFDMA_ENABLE, EHT_MODE_UL_OFDMA);
+
+		if (arvif->vif->bss_conf.eht_80mhz_full_bw_ul_mumimo)
+			value |= u32_encode_bits(EHT_UL_MUMIMO_ENABLE, EHT_MODE_MUMIMO);
+
+		if (arvif->vif->bss_conf.eht_su_beamformee)
+			value |= u32_encode_bits(EHT_SU_BFEE_ENABLE,
+						 EHT_MODE_SU_TX_BFEE);
+	}
+
+	ret = ath12k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id, param, value);
+	if (ret) {
+		ath12k_warn(ar->ab, "failed to set vdev %d EHT MU mode: %d\n",
+			    arvif->vdev_id, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static void ath12k_bss_assoc(struct ath12k *ar,
 			     struct ath12k_vif *arvif,
 			     struct ieee80211_bss_conf *bss_conf)
@@ -2892,6 +2936,12 @@ static void ath12k_mac_bss_info_changed(struct ath12k *ar,
 				ath12k_warn(ar->ab,
 					    "failed to set HE TXBF config for vdev: %d\n",
 					    arvif->vdev_id);
+
+			ret = ath12k_mac_set_eht_txbf_conf(arvif);
+			if (ret)
+				ath12k_warn(ar->ab,
+					    "failed to set EHT TXBF config for vdev: %d\n",
+					    arvif->vdev_id);
 		}
 		ath12k_control_beaconing(arvif, info);
 
diff --git a/drivers/net/wireless/ath/ath12k/wmi.h b/drivers/net/wireless/ath/ath12k/wmi.h
index 055b1d65bff0..752fc2d53d8f 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.h
+++ b/drivers/net/wireless/ath/ath12k/wmi.h
@@ -1135,6 +1135,7 @@ enum wmi_tlv_vdev_param {
 	WMI_VDEV_PARAM_BSS_COLOR,
 	WMI_VDEV_PARAM_SET_HEMU_MODE,
 	WMI_VDEV_PARAM_HEOPS_0_31 = 0x8003,
+	WMI_VDEV_PARAM_SET_EHT_MU_MODE = 0x8005,
 };
 
 enum wmi_tlv_peer_flags {
@@ -2962,6 +2963,26 @@ struct ath12k_wmi_rx_reorder_queue_remove_arg {
 #define HE_MU_BFER_ENABLE	1
 #define HE_SU_BFER_ENABLE	1
 
+#define EHT_MODE_SU_TX_BFEE		BIT(0)
+#define EHT_MODE_SU_TX_BFER		BIT(1)
+#define EHT_MODE_MU_TX_BFEE		BIT(2)
+#define EHT_MODE_MU_TX_BFER		BIT(3)
+#define EHT_MODE_DL_OFDMA		BIT(4)
+#define EHT_MODE_UL_OFDMA		BIT(5)
+#define EHT_MODE_MUMIMO			BIT(6)
+#define EHT_MODE_DL_OFDMA_TXBF		BIT(7)
+#define EHT_MODE_DL_OFDMA_MUMIMO	BIT(8)
+#define EHT_MODE_UL_OFDMA_MUMIMO	BIT(9)
+
+#define EHT_DL_MUOFDMA_ENABLE    1
+#define EHT_UL_MUOFDMA_ENABLE    1
+#define EHT_DL_MUMIMO_ENABLE     1
+#define EHT_UL_MUMIMO_ENABLE     1
+#define EHT_MU_BFEE_ENABLE       1
+#define EHT_SU_BFEE_ENABLE       1
+#define EHT_MU_BFER_ENABLE       1
+#define EHT_SU_BFER_ENABLE       1
+
 #define HE_VHT_SOUNDING_MODE_ENABLE		1
 #define HE_SU_MU_SOUNDING_MODE_ENABLE		1
 #define HE_TRIG_NONTRIG_SOUNDING_MODE_ENABLE	1
-- 
2.17.1