Received-SPF: pass (google.com: domain of linux-wireless+bounces-6498-linux.lists.archive=gmail.com@vger.kernel.org designates 139.178.88.99 as permitted sender) client-ip=139.178.88.99;
Content-Type: text/plain;
	charset=utf-8
Precedence: bulk
Mime-Version: 1.0 (Mac OS X Mail 16.0 \(3774.500.171.1.1\))
Subject: Re: [PATCH v10 0/2] wifi: mwifiex: add code to support host mlme
From: Marcel Holtmann <marcel@holtmann.org>
In-Reply-To: <20240418060626.431202-1-yu-hao.lin@nxp.com>
Date: Thu, 18 Apr 2024 08:47:58 +0200
Cc: linux-wireless@vger.kernel.org,
 LKML <linux-kernel@vger.kernel.org>,
 briannorris@chromium.org,
 Kalle Valo <kvalo@kernel.org>,
 francesco@dolcini.it,
 tsung-hsien.hsieh@nxp.com,
 rafael.beims@toradex.com,
 Francesco Dolcini <francesco.dolcini@toradex.com>
Content-Transfer-Encoding: quoted-printable
Message-Id: <0ED16BAB-6E7D-487C-BBCA-E63FEF37C60D@holtmann.org>
References: <20240418060626.431202-1-yu-hao.lin@nxp.com>
To: David Lin <yu-hao.lin@nxp.com>

Hi David,

> With host mlme:
> Tested-by: <rafael.beims@toradex.com> #Verdin AM62 IW416 SD
> Without host mlme:
> Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # =
88W8997-SD
>=20
> This series add host based MLME support to the mwifiex driver, this
> enables WPA3 support in both client and AP mode.
> To enable WPA3, a firmware with corresponding V2 Key API support is
> required.
> The feature is currently only enabled on NXP IW416 (SD8978), and it
> was internally validated by NXP QA team. Other NXP Wi-Fi chips
> supported in current mwifiex are not affected by this change.

I am a bit confused here. If this is just for WPA3 support, then =
wasn=E2=80=99t
this suppose to be solved with external_auth support?

Regards

Marcel