Received-SPF: pass (google.com: domain of linux-wireless+bounces-6524-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.80.249 as permitted sender) client-ip=147.75.80.249;
From: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
To: <ath12k@lists.infradead.org>
CC: <linux-wireless@vger.kernel.org>,
        Raj Kumar Bhagat
	<quic_rajkbhag@quicinc.com>
Subject: [PATCH 1/2] wifi: ath12k: read single_chip_mlo_support parameter from QMI PHY capability
Date: Thu, 18 Apr 2024 18:26:08 +0530
Message-ID: <20240418125609.3867730-2-quic_rajkbhag@quicinc.com>
In-Reply-To: <20240418125609.3867730-1-quic_rajkbhag@quicinc.com>
References: <20240418125609.3867730-1-quic_rajkbhag@quicinc.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain

New parameter 'single_chip_mlo_support' was added in QMI PHY
capability response message. This is an optional parameter added
in QCN9274 firmware. This parameter states if the firmware
supports Single-Link Operation (SLO) and Multi-Link Operation (MLO)
within the same device.

If single_chip_mlo_support = 1, then intra device SLO/MLO is supported
in the firmware.
If single_chip_mlo_support = 0, then intra device SLO/MLO is not
supported in the firmware.

Hence, add support to read 'single_chip_mlo_support' parameter from
the QMI PHY capability response message.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1

Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
---
 drivers/net/wireless/ath/ath12k/qmi.c | 24 ++++++++++++++++++++++--
 drivers/net/wireless/ath/ath12k/qmi.h |  2 ++
 2 files changed, 24 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/qmi.c b/drivers/net/wireless/ath/ath12k/qmi.c
index db8ba5fec2ae..a555839dae8e 100644
--- a/drivers/net/wireless/ath/ath12k/qmi.c
+++ b/drivers/net/wireless/ath/ath12k/qmi.c
@@ -582,6 +582,24 @@ static const struct qmi_elem_info qmi_wlanfw_phy_cap_resp_msg_v01_ei[] = {
 		.offset		= offsetof(struct qmi_wlanfw_phy_cap_resp_msg_v01,
 					   board_id),
 	},
+	{
+		.data_type      = QMI_OPT_FLAG,
+		.elem_len       = 1,
+		.elem_size      = sizeof(u8),
+		.array_type     = NO_ARRAY,
+		.tlv_type       = 0x13,
+		.offset         = offsetof(struct qmi_wlanfw_phy_cap_resp_msg_v01,
+					   single_chip_mlo_support_valid),
+	},
+	{
+		.data_type      = QMI_UNSIGNED_1_BYTE,
+		.elem_len       = 1,
+		.elem_size      = sizeof(u8),
+		.array_type     = NO_ARRAY,
+		.tlv_type       = 0x13,
+		.offset         = offsetof(struct qmi_wlanfw_phy_cap_resp_msg_v01,
+					   single_chip_mlo_support),
+	},
 	{
 		.data_type	= QMI_EOTI,
 		.array_type	= NO_ARRAY,
@@ -2160,9 +2178,11 @@ static void ath12k_qmi_phy_cap_send(struct ath12k_base *ab)
 
 	ab->qmi.num_radios = resp.num_phy;
 
-	ath12k_dbg(ab, ATH12K_DBG_QMI, "phy capability resp valid %d num_phy %d valid %d board_id %d\n",
+	ath12k_dbg(ab, ATH12K_DBG_QMI,
+		   "phy capability resp valid %d num_phy %d valid %d board_id %d valid %d single_chip_mlo_support %d\n",
 		   resp.num_phy_valid, resp.num_phy,
-		   resp.board_id_valid, resp.board_id);
+		   resp.board_id_valid, resp.board_id,
+		   resp.single_chip_mlo_support_valid, resp.single_chip_mlo_support);
 
 	return;
 
diff --git a/drivers/net/wireless/ath/ath12k/qmi.h b/drivers/net/wireless/ath/ath12k/qmi.h
index 6ee33c9851c6..f7a5eb11ce44 100644
--- a/drivers/net/wireless/ath/ath12k/qmi.h
+++ b/drivers/net/wireless/ath/ath12k/qmi.h
@@ -265,6 +265,8 @@ struct qmi_wlanfw_phy_cap_resp_msg_v01 {
 	u8 num_phy;
 	u8 board_id_valid;
 	u32 board_id;
+	u8 single_chip_mlo_support_valid;
+	u8 single_chip_mlo_support;
 };
 
 #define QMI_WLANFW_IND_REGISTER_REQ_MSG_V01_MAX_LEN		54
-- 
2.34.1