Received-SPF: pass (google.com: domain of linux-wireless+bounces-7794-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
From: Guilherme Giacomo Simoes <trintaeoitogc@gmail.com>
To: miriam.rachel.korenblit@intel.com,
	kvalo@kernel.org,
	rafael.j.wysocki@intel.com,
	daniel.lezcano@linaro.org,
	johannes.berg@intel.com,
	dmantipov@yandex.ru
Cc: Guilherme Giacomo Simoes <trintaeoitogc@gmail.com>,
	linux-wireless@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2] iwlwifi: mvm: adding check if the thermal firmware is running
Date: Fri, 17 May 2024 14:13:05 -0300
Message-ID: <20240517171311.3705-1-trintaeoitogc@gmail.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

In the dmesg is showing the message "failed to read out thermal zone"
as if the temperature read is failed by don't find the thermal zone.

After researching and debugging, I see that this specific error is
occurrenced because the thermal try read the temperature when is started,
but the firmware is not running yet.

For more legibiliti i change the tt.c for return EAGAIN when this was occurrence.
After this change, in my computer I compile and install kernel in /boot
and in my dmesg the message "failed to read out thermal zone" is not show
any more.

I would like to thanks for Rafael Wysocki <refael.j.wysocki@intel.com> and
Kalle Valo <kvalo@kernel.org> for your suggestions in my first patch.

Signed-off-by: Guilherme Giacomo Simoes <trintaeoitogc@gmail.com>
---
 drivers/net/wireless/intel/iwlwifi/mvm/tt.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c
index 8083c4b2ab6b..68ab9966330c 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c
@@ -620,8 +620,14 @@ static int iwl_mvm_tzone_get_temp(struct thermal_zone_device *device,
 
 	mutex_lock(&mvm->mutex);
 
-	if (!iwl_mvm_firmware_running(mvm) ||
-	    mvm->fwrt.cur_fw_img != IWL_UCODE_REGULAR) {
+	const int res = iwl_mvm_firmware_running(mvm);
+
+	if (!res) {
+		ret = -EAGAIN;
+		goto out;
+	}
+
+	if (mvm->fwrt.cur_fw_img != IWL_UCODE_REGULAR) {
 		ret = -ENODATA;
 		goto out;
 	}
-- 
2.45.1