(cc linux-wireless)
On Tue, 5 Feb 2008 23:57:46 +0100 Tino Keitel <[email protected]> wrote:
> Hi,
>
> I tried the current git (9ef9dc69d4167276c04590d67ee55de8380bc1ad) and
> got the following error message from ath5k:
>
> ath5k_pci 0000:02:00.0: registered as 'phy0'
> ath5k phy0: failed to resume the MAC Chip
> ath5k_pci: probe of 0000:02:00.0 failed with error -5
>
> Here is the lspci -vnn output:
>
> 02:00.0 Ethernet controller [0200]: Atheros Communications, Inc.
> AR5006EG 802.11 b/g Wireless PCI Express Adapter [168c:001c] (rev 01)
> Subsystem: Apple Computer Inc. Unknown device [106b:0086]
> Flags: fast devsel, IRQ 17
> Memory at 90100000 (64-bit, non-prefetchable) [disabled]
> [size=64K]
> Capabilities: [40] Power Management version 2
> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit-
> Queue=0/0 Enable-
> Capabilities: [60] Express Legacy Endpoint, MSI 00
> Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
> Capabilities: [100] Advanced Error Reporting <?>
> Capabilities: [140] Virtual Channel <?>
> Kernel modules: ath5k
>
> The same device works with madwifi:
>
> ath_rate_sample: 1.2 (svn r3339)
> MadWifi: ath_attach: Switching per-packet transmit power control off
> wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
> 24Mbps 36Mbps 48Mbps 54Mbps
> wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> wifi0: H/W encryption support: WEP AES AES_CCM TKIP
> wifi0: ath_announce: Use hw queue 1 for WME_AC_BE traffic
> wifi0: ath_announce: Use hw queue 0 for WME_AC_BK traffic
> wifi0: ath_announce: Use hw queue 2 for WME_AC_VI traffic
> wifi0: ath_announce: Use hw queue 3 for WME_AC_VO traffic
> wifi0: ath_announce: Use hw queue 8 for CAB traffic
> wifi0: ath_announce: Use hw queue 9 for beacons
> ath_pci: wifi0: Atheros 5424/2424: mem=0x90100000, irq=17
>
> I can also set the interface up and use iwlist ath0 scan.
>
> > We failed to resume after a hardware reset here for a whole second. Is there any
> > version of ath5k which worked for you (is this a regression)?
>
> I cannot speak for Tino, but my ath5k never worked in MacBook -- it
> failed the same way, and I believe the hardware was the same. My
> understanding was that it was a known bug with PCIE devices, but I got
> that out of reading list archives.
Nick Kossifidis and I are in the process of debugging this -- we
determined that AR5K_RESET_CTL_PCI hangs the card in hw_nic_wakeup.
It doesn't look like there is any general support for 5424 cards yet.
Thread is at:
http://marc.info/?l=linux-wireless&m=120179743111458
-Bob
> On Tue, 5 Feb 2008 23:57:46 +0100 Tino Keitel <[email protected]> wrote:
>
> > Hi,
> >
> > I tried the current git (9ef9dc69d4167276c04590d67ee55de8380bc1ad) and
> > got the following error message from ath5k:
> >
> > ath5k_pci 0000:02:00.0: registered as 'phy0'
> > ath5k phy0: failed to resume the MAC Chip
> > ath5k_pci: probe of 0000:02:00.0 failed with error -5
Hi Tino,
I have the same chip and it is currently unsupported by ath5k. See:
http://marc.info/?l=linux-wireless&m=120179743111458
On 02/07/2008 10:25 PM, Tino Keitel wrote:
> On Wed, Feb 06, 2008 at 10:46:39 -0500, Bob Copeland wrote:
>>>> We failed to resume after a hardware reset here for a whole second. Is there any
>>>> version of ath5k which worked for you (is this a regression)?
>>> I cannot speak for Tino, but my ath5k never worked in MacBook -- it
>>> failed the same way, and I believe the hardware was the same. My
>>> understanding was that it was a known bug with PCIE devices, but I got
>>> that out of reading list archives.
>> Nick Kossifidis and I are in the process of debugging this -- we
>> determined that AR5K_RESET_CTL_PCI hangs the card in hw_nic_wakeup.
>> It doesn't look like there is any general support for 5424 cards yet.
Seems hold for this case too, as Bob noted.
> I tried the patch, and the card was detected. I was able to associate
> with an WPA2 AP and send/receive some traffic. But after a while the
> interface broke:
>
> ath0: No ProbeResp from current AP 00:14:bf:16:25:87 - assume out of
> range
> ath5k_hw_get_isr: 0x00000020
> ...
> ath0: failed to set channel 165 (5825 MHz) for scan
> ath0: failed to restore operational channel after scan
> printk: 19 messages suppressed.
> ath5k phy0: calibration timeout (2447MHz)
> printk: 1 messages suppressed.
> ath5k phy0: calibration timeout (2447MHz)
> ath5k phy0: unable to reset hardware: -11
What's the srev a phy ver printed few lines above this, please?
On Wed, Feb 06, 2008 at 11:42:40AM +0100, Jiri Slaby wrote:
> On 02/05/2008 11:57 PM, Tino Keitel wrote:
> > Hi,
> >
> > I tried the current git (9ef9dc69d4167276c04590d67ee55de8380bc1ad) and
> > got the following error message from ath5k:
> >
> > ath5k_pci 0000:02:00.0: registered as 'phy0'
> > ath5k phy0: failed to resume the MAC Chip
> > ath5k_pci: probe of 0000:02:00.0 failed with error -5
>
> We failed to resume after a hardware reset here for a whole second. Is there any
> version of ath5k which worked for you (is this a regression)?
I cannot speak for Tino, but my ath5k never worked in MacBook -- it
failed the same way, and I believe the hardware was the same. My
understanding was that it was a known bug with PCIE devices, but I got
that out of reading list archives.
>
> > Here is the lspci -vnn output:
> >
> > 02:00.0 Ethernet controller [0200]: Atheros Communications, Inc.
> > AR5006EG 802.11 b/g Wireless PCI Express Adapter [168c:001c] (rev 01)
> > Subsystem: Apple Computer Inc. Unknown device [106b:0086]
> > Flags: fast devsel, IRQ 17
> > Memory at 90100000 (64-bit, non-prefetchable) [disabled]
> > [size=64K]
> > Capabilities: [40] Power Management version 2
> > Capabilities: [50] Message Signalled Interrupts: Mask- 64bit-
> > Queue=0/0 Enable-
> > Capabilities: [60] Express Legacy Endpoint, MSI 00
> > Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
> > Capabilities: [100] Advanced Error Reporting <?>
> > Capabilities: [140] Virtual Channel <?>
> > Kernel modules: ath5k
> >
> > The same device works with madwifi:
> >
> > ath_rate_sample: 1.2 (svn r3339)
> > MadWifi: ath_attach: Switching per-packet transmit power control off
> > wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> > wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> > wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
> > 24Mbps 36Mbps 48Mbps 54Mbps
> > wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> > wifi0: H/W encryption support: WEP AES AES_CCM TKIP
> > wifi0: ath_announce: Use hw queue 1 for WME_AC_BE traffic
> > wifi0: ath_announce: Use hw queue 0 for WME_AC_BK traffic
> > wifi0: ath_announce: Use hw queue 2 for WME_AC_VI traffic
> > wifi0: ath_announce: Use hw queue 3 for WME_AC_VO traffic
> > wifi0: ath_announce: Use hw queue 8 for CAB traffic
> > wifi0: ath_announce: Use hw queue 9 for beacons
> > ath_pci: wifi0: Atheros 5424/2424: mem=0x90100000, irq=17
> >
> > I can also set the interface up and use iwlist ath0 scan.
>
> Hmm, I guess madwif-old-openhal doesn't work either.
>
> I suspect ath5k_hw_nic_wakeup being called before setting ah_single_chip in
> ath5k_hw_attach. Could you test the attached patch?
I cannot, as my MacBook is now broken.
--
Joseph Fannin
[email protected]
On 02/05/2008 11:57 PM, Tino Keitel wrote:
> Hi,
>
> I tried the current git (9ef9dc69d4167276c04590d67ee55de8380bc1ad) and
> got the following error message from ath5k:
>
> ath5k_pci 0000:02:00.0: registered as 'phy0'
> ath5k phy0: failed to resume the MAC Chip
> ath5k_pci: probe of 0000:02:00.0 failed with error -5
We failed to resume after a hardware reset here for a whole second. Is there any
version of ath5k which worked for you (is this a regression)?
> Here is the lspci -vnn output:
>
> 02:00.0 Ethernet controller [0200]: Atheros Communications, Inc.
> AR5006EG 802.11 b/g Wireless PCI Express Adapter [168c:001c] (rev 01)
> Subsystem: Apple Computer Inc. Unknown device [106b:0086]
> Flags: fast devsel, IRQ 17
> Memory at 90100000 (64-bit, non-prefetchable) [disabled]
> [size=64K]
> Capabilities: [40] Power Management version 2
> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit-
> Queue=0/0 Enable-
> Capabilities: [60] Express Legacy Endpoint, MSI 00
> Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
> Capabilities: [100] Advanced Error Reporting <?>
> Capabilities: [140] Virtual Channel <?>
> Kernel modules: ath5k
>
> The same device works with madwifi:
>
> ath_rate_sample: 1.2 (svn r3339)
> MadWifi: ath_attach: Switching per-packet transmit power control off
> wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
> 24Mbps 36Mbps 48Mbps 54Mbps
> wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> wifi0: H/W encryption support: WEP AES AES_CCM TKIP
> wifi0: ath_announce: Use hw queue 1 for WME_AC_BE traffic
> wifi0: ath_announce: Use hw queue 0 for WME_AC_BK traffic
> wifi0: ath_announce: Use hw queue 2 for WME_AC_VI traffic
> wifi0: ath_announce: Use hw queue 3 for WME_AC_VO traffic
> wifi0: ath_announce: Use hw queue 8 for CAB traffic
> wifi0: ath_announce: Use hw queue 9 for beacons
> ath_pci: wifi0: Atheros 5424/2424: mem=0x90100000, irq=17
>
> I can also set the interface up and use iwlist ath0 scan.
Hmm, I guess madwif-old-openhal doesn't work either.
I suspect ath5k_hw_nic_wakeup being called before setting ah_single_chip in
ath5k_hw_attach. Could you test the attached patch?
--
Signed-off-by: Jiri Slaby <[email protected]>
---
drivers/net/wireless/ath5k/hw.c | 21 ++++++++++-----------
1 files changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c
index 3a4bf40..b56d239 100644
--- a/drivers/net/wireless/ath5k/hw.c
+++ b/drivers/net/wireless/ath5k/hw.c
@@ -181,11 +181,6 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
else if (ah->ah_version <= AR5K_AR5211)
ah->ah_proc_rx_desc = ath5k_hw_proc_old_rx_status;
- /* Bring device out of sleep and reset it's units */
- ret = ath5k_hw_nic_wakeup(ah, AR5K_INIT_MODE, true);
- if (ret)
- goto err_free;
-
/* Get MAC, PHY and RADIO revisions */
srev = ath5k_hw_reg_read(ah, AR5K_SREV);
ah->ah_mac_srev = srev;
@@ -210,12 +205,16 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
}
/* Identify single chip solutions */
- if((srev <= AR5K_SREV_VER_AR5414) &&
- (srev >= AR5K_SREV_VER_AR2424)) {
- ah->ah_single_chip = true;
- } else {
- ah->ah_single_chip = false;
- }
+ ah->ah_single_chip = !!(srev >= AR5K_SREV_VER_AR2424 &&
+ srev <= AR5K_SREV_VER_AR5414);
+
+ printk(KERN_INFO "SINGLE: %d, srev: %x, phy:\n",
+ ah->ah_single_chip, srev, ah->ah_phy_revision);
+
+ /* Bring device out of sleep and reset it's units */
+ ret = ath5k_hw_nic_wakeup(ah, AR5K_INIT_MODE, true);
+ if (ret)
+ goto err_free;
/* Single chip radio */
if (ah->ah_radio_2ghz_revision == ah->ah_radio_5ghz_revision)
--
1.5.3.8
On 02/06/2008 11:48 AM, Andreas Schwab wrote:
>> + ah->ah_single_chip = !!(srev >= AR5K_SREV_VER_AR2424 &&
> ^^
>
> This is useless.
Amended locally, thanks.
On Thu, Feb 07, 2008 at 22:51:04 +0100, Jiri Slaby wrote:
[...]
> What's the srev a phy ver printed few lines above this, please?
ath5k_pci 0000:02:00.0: registered as 'phy0'
SINGLE: 1, srev: a3, phy:
phy0: Selected rate control algorithm 'pid'
ath5k phy0: Atheros AR5424 chip found (MAC: 0xa3, PHY: 0x61)
Regards,
Tino
On Wed, Feb 06, 2008 at 10:46:39 -0500, Bob Copeland wrote:
> > > We failed to resume after a hardware reset here for a whole second. Is there any
> > > version of ath5k which worked for you (is this a regression)?
> >
> > I cannot speak for Tino, but my ath5k never worked in MacBook -- it
> > failed the same way, and I believe the hardware was the same. My
> > understanding was that it was a known bug with PCIE devices, but I got
> > that out of reading list archives.
>
> Nick Kossifidis and I are in the process of debugging this -- we
> determined that AR5K_RESET_CTL_PCI hangs the card in hw_nic_wakeup.
> It doesn't look like there is any general support for 5424 cards yet.
I tried the patch, and the card was detected. I was able to associate
with an WPA2 AP and send/receive some traffic. But after a while the
interface broke:
ath0: No ProbeResp from current AP 00:14:bf:16:25:87 - assume out of
range
ath5k_hw_get_isr: 0x00000020
...
ath0: failed to set channel 165 (5825 MHz) for scan
ath0: failed to restore operational channel after scan
printk: 19 messages suppressed.
ath5k phy0: calibration timeout (2447MHz)
printk: 1 messages suppressed.
ath5k phy0: calibration timeout (2447MHz)
ath5k phy0: unable to reset hardware: -11
Regards,
Tino
Jiri Slaby <[email protected]> writes:
> @@ -210,12 +205,16 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_s=
oftc *sc, u8 mac_version)
> }
> =20
> /* Identify single chip solutions */
> - if((srev <=3D AR5K_SREV_VER_AR5414) &&
> - (srev >=3D AR5K_SREV_VER_AR2424)) {
> - ah->ah_single_chip =3D true;
> - } else {
> - ah->ah_single_chip =3D false;
> - }
> + ah->ah_single_chip =3D !!(srev >=3D AR5K_SREV_VER_AR2424 &&
^^
This is useless.
Andreas.
--=20
Andreas Schwab, SuSE Labs, [email protected]
SuSE Linux Products GmbH, Maxfeldstra=DFe 5, 90409 N=FCrnberg, Germany
PGP key fingerprint =3D 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4=
ED5
"And now for something completely different."
On Wed, Feb 06, 2008 at 11:42:40 +0100, Jiri Slaby wrote:
> On 02/05/2008 11:57 PM, Tino Keitel wrote:
> > Hi,
> >
> > I tried the current git (9ef9dc69d4167276c04590d67ee55de8380bc1ad) and
> > got the following error message from ath5k:
> >
> > ath5k_pci 0000:02:00.0: registered as 'phy0'
> > ath5k phy0: failed to resume the MAC Chip
> > ath5k_pci: probe of 0000:02:00.0 failed with error -5
>
> We failed to resume after a hardware reset here for a whole second. Is there any
> version of ath5k which worked for you (is this a regression)?
No, this was my first try with ath5k.
> I suspect ath5k_hw_nic_wakeup being called before setting ah_single_chip in
> ath5k_hw_attach. Could you test the attached patch?
Thanks, I'll try the patch this evening.
Regards,
Tino