In practice APs do not send country IE channel triplets for channels
the AP is not operating on and if they were to do so they would have
to use the regulatory extension which we currently do not process.
No AP has been seen in practice that does this though so just drop
those country IEs.
Additionally it has been noted the first series of country IE
channels triplets are specific to the band the AP sends. Propagate
the band on which the country IE was found on reject the country
IE then if the triplets are ever oustide of the band.
Although we now won't process country IE information with multiple
band information we leave the intersection work as is as it is
technically possible for someone to want to eventually process these
type of country IEs with regulatory extensions.
Cc: Jouni Malinen <[email protected]>
Cc: Johannes Berg <[email protected]>
Signed-off-by: Luis R. Rodriguez <[email protected]>
---
This goes out tested now.
net/wireless/reg.c | 74 ++++++++++++++++++++++++++++++++++++++--------------
net/wireless/reg.h | 11 +++++++
net/wireless/sme.c | 1 +
3 files changed, 66 insertions(+), 20 deletions(-)
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 5b03ca7..7242121 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -485,6 +485,34 @@ static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range,
}
/*
+ * This is a work around for sanity checking ieee80211_channel_to_frequency()'s
+ * work. ieee80211_channel_to_frequency() can for example currently provide a
+ * 2 GHz channel when in fact a 5 GHz channel was desired. An example would be
+ * an AP providing channel 8 on a country IE triplet when it sent this on the
+ * 5 GHz band, that channel is designed to be channel 8 on 5 GHz, not a 2 GHz
+ * channel.
+ *
+ * This can be removed once ieee80211_channel_to_frequency() takes in a band.
+ */
+static bool chan_in_band(int chan, enum ieee80211_band band)
+{
+ int center_freq = ieee80211_channel_to_frequency(chan);
+
+ switch (band) {
+ case IEEE80211_BAND_2GHZ:
+ if (center_freq <= 2484)
+ return true;
+ return false;
+ case IEEE80211_BAND_5GHZ:
+ if (center_freq >= 5005)
+ return true;
+ return false;
+ default:
+ return false;
+ }
+}
+
+/*
* Some APs may send a country IE triplet for each channel they
* support and while this is completely overkill and silly we still
* need to support it. We avoid making a single rule for each channel
@@ -532,7 +560,8 @@ static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range,
* Returns 0 if the IE has been found to be invalid in the middle
* somewhere.
*/
-static int max_subband_chan(int orig_cur_chan,
+static int max_subband_chan(enum ieee80211_band band,
+ int orig_cur_chan,
int orig_end_channel,
s8 orig_max_power,
u8 **country_ie,
@@ -541,7 +570,6 @@ static int max_subband_chan(int orig_cur_chan,
u8 *triplets_start = *country_ie;
u8 len_at_triplet = *country_ie_len;
int end_subband_chan = orig_end_channel;
- enum ieee80211_band band;
/*
* We'll deal with padding for the caller unless
@@ -557,17 +585,14 @@ static int max_subband_chan(int orig_cur_chan,
*country_ie += 3;
*country_ie_len -= 3;
- if (orig_cur_chan <= 14)
- band = IEEE80211_BAND_2GHZ;
- else
- band = IEEE80211_BAND_5GHZ;
+ if (!chan_in_band(orig_cur_chan, band))
+ return 0;
while (*country_ie_len >= 3) {
int end_channel = 0;
struct ieee80211_country_ie_triplet *triplet =
(struct ieee80211_country_ie_triplet *) *country_ie;
int cur_channel = 0, next_expected_chan;
- enum ieee80211_band next_band = IEEE80211_BAND_2GHZ;
/* means last triplet is completely unrelated to this one */
if (triplet->ext.reg_extension_id >=
@@ -592,6 +617,9 @@ static int max_subband_chan(int orig_cur_chan,
if (triplet->chans.first_channel <= end_subband_chan)
return 0;
+ if (!chan_in_band(triplet->chans.first_channel, band))
+ return 0;
+
/* 2 GHz */
if (triplet->chans.first_channel <= 14) {
end_channel = triplet->chans.first_channel +
@@ -600,14 +628,10 @@ static int max_subband_chan(int orig_cur_chan,
else {
end_channel = triplet->chans.first_channel +
(4 * (triplet->chans.num_channels - 1));
- next_band = IEEE80211_BAND_5GHZ;
}
- if (band != next_band) {
- *country_ie -= 3;
- *country_ie_len += 3;
- break;
- }
+ if (!chan_in_band(end_channel, band))
+ return 0;
if (orig_max_power != triplet->chans.max_power) {
*country_ie -= 3;
@@ -666,6 +690,7 @@ static int max_subband_chan(int orig_cur_chan,
* with our userspace regulatory agent to get lower bounds.
*/
static struct ieee80211_regdomain *country_ie_2_rd(
+ enum ieee80211_band band,
u8 *country_ie,
u8 country_ie_len,
u32 *checksum)
@@ -743,8 +768,11 @@ static struct ieee80211_regdomain *country_ie_2_rd(
if (triplet->chans.num_channels == 0)
return NULL;
+ if (!chan_in_band(triplet->chans.first_channel, band))
+ return NULL;
+
/* 2 GHz */
- if (triplet->chans.first_channel <= 14)
+ if (band == IEEE80211_BAND_2GHZ)
end_channel = triplet->chans.first_channel +
triplet->chans.num_channels - 1;
else
@@ -767,7 +795,8 @@ static struct ieee80211_regdomain *country_ie_2_rd(
* or for whatever reason sends triplets with multiple channels
* separated when in fact they should be together.
*/
- end_channel = max_subband_chan(cur_channel,
+ end_channel = max_subband_chan(band,
+ cur_channel,
end_channel,
triplet->chans.max_power,
&country_ie,
@@ -775,6 +804,9 @@ static struct ieee80211_regdomain *country_ie_2_rd(
if (!end_channel)
return NULL;
+ if (!chan_in_band(end_channel, band))
+ return NULL;
+
cur_sub_max_channel = end_channel;
/* Basic sanity check */
@@ -867,14 +899,15 @@ static struct ieee80211_regdomain *country_ie_2_rd(
reg_rule->flags = flags;
/* 2 GHz */
- if (triplet->chans.first_channel <= 14)
+ if (band == IEEE80211_BAND_2GHZ)
end_channel = triplet->chans.first_channel +
triplet->chans.num_channels -1;
else
end_channel = triplet->chans.first_channel +
(4 * (triplet->chans.num_channels - 1));
- end_channel = max_subband_chan(triplet->chans.first_channel,
+ end_channel = max_subband_chan(band,
+ triplet->chans.first_channel,
end_channel,
triplet->chans.max_power,
&country_ie,
@@ -1981,8 +2014,9 @@ static bool reg_same_country_ie_hint(struct wiphy *wiphy,
* therefore cannot iterate over the rdev list here.
*/
void regulatory_hint_11d(struct wiphy *wiphy,
- u8 *country_ie,
- u8 country_ie_len)
+ enum ieee80211_band band,
+ u8 *country_ie,
+ u8 country_ie_len)
{
struct ieee80211_regdomain *rd = NULL;
char alpha2[2];
@@ -2028,7 +2062,7 @@ void regulatory_hint_11d(struct wiphy *wiphy,
wiphy_idx_valid(last_request->wiphy_idx)))
goto out;
- rd = country_ie_2_rd(country_ie, country_ie_len, &checksum);
+ rd = country_ie_2_rd(band, country_ie, country_ie_len, &checksum);
if (!rd) {
REG_DBG_PRINT("cfg80211: Ignoring bogus country IE\n");
goto out;
diff --git a/net/wireless/reg.h b/net/wireless/reg.h
index 3362c7c..3018508 100644
--- a/net/wireless/reg.h
+++ b/net/wireless/reg.h
@@ -41,14 +41,25 @@ int regulatory_hint_found_beacon(struct wiphy *wiphy,
* regulatory_hint_11d - hints a country IE as a regulatory domain
* @wiphy: the wireless device giving the hint (used only for reporting
* conflicts)
+ * @band: the band on which the country IE was received on. This determines
+ * the band we'll process the country IE channel triplets for.
* @country_ie: pointer to the country IE
* @country_ie_len: length of the country IE
*
* We will intersect the rd with the what CRDA tells us should apply
* for the alpha2 this country IE belongs to, this prevents APs from
* sending us incorrect or outdated information against a country.
+ *
+ * The AP is expected to provide Country IE channel triplets for the
+ * band it is on. It is technically possible for APs to send channel
+ * country IE triplets even for channels outside of the band they are
+ * in but for that they would have to use the regulatory extension
+ * in combination with a triplet but this behaviour is currently
+ * not observed. For this reason if a triplet is seen with channel
+ * information for a band the BSS is not present in it will be ignored.
*/
void regulatory_hint_11d(struct wiphy *wiphy,
+ enum ieee80211_band band,
u8 *country_ie,
u8 country_ie_len);
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index 2333d78..2ce5e16 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -454,6 +454,7 @@ void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
* - and country_ie[1] which is the IE length
*/
regulatory_hint_11d(wdev->wiphy,
+ bss->channel->band,
country_ie + 2,
country_ie[1]);
}
--
1.6.3.3
Luis R. Rodriguez a ?crit :
> On Sat, Jan 16, 2010 at 01:55:21AM -0800, Benoit PAPILLAULT wrote:
>
>> Luis R. Rodriguez a ?crit :
>>
>>> In practice APs do not send country IE channel triplets for channels
>>> the AP is not operating on and if they were to do so they would have
>>> to use the regulatory extension which we currently do not process.
>>> No AP has been seen in practice that does this though so just drop
>>> those country IEs.
>>>
>>> Additionally it has been noted the first series of country IE
>>> channels triplets are specific to the band the AP sends. Propagate
>>> the band on which the country IE was found on reject the country
>>> IE then if the triplets are ever oustide of the band.
>>>
>>> Although we now won't process country IE information with multiple
>>> band information we leave the intersection work as is as it is
>>> technically possible for someone to want to eventually process these
>>> type of country IEs with regulatory extensions.
>>>
>>> Cc: Jouni Malinen <[email protected]>
>>> Cc: Johannes Berg <[email protected]>
>>> Signed-off-by: Luis R. Rodriguez <[email protected]>
>>> ---
>>>
>>> This goes out tested now.
>>>
>>> net/wireless/reg.c | 74 ++++++++++++++++++++++++++++++++++++++--------------
>>> net/wireless/reg.h | 11 +++++++
>>> net/wireless/sme.c | 1 +
>>> 3 files changed, 66 insertions(+), 20 deletions(-)
>>>
>>> diff --git a/net/wireless/reg.c b/net/wireless/reg.c
>>> index 5b03ca7..7242121 100644
>>> --- a/net/wireless/reg.c
>>> +++ b/net/wireless/reg.c
>>> @@ -485,6 +485,34 @@ static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range,
>>> }
>>>
>>> /*
>>> + * This is a work around for sanity checking ieee80211_channel_to_frequency()'s
>>> + * work. ieee80211_channel_to_frequency() can for example currently provide a
>>> + * 2 GHz channel when in fact a 5 GHz channel was desired. An example would be
>>> + * an AP providing channel 8 on a country IE triplet when it sent this on the
>>> + * 5 GHz band, that channel is designed to be channel 8 on 5 GHz, not a 2 GHz
>>> + * channel.
>>> + *
>>> + * This can be removed once ieee80211_channel_to_frequency() takes in a band.
>>> + */
>>> +static bool chan_in_band(int chan, enum ieee80211_band band)
>>> +{
>>> + int center_freq = ieee80211_channel_to_frequency(chan);
>>> +
>>> + switch (band) {
>>> + case IEEE80211_BAND_2GHZ:
>>> + if (center_freq <= 2484)
>>> + return true;
>>> + return false;
>>> + case IEEE80211_BAND_5GHZ:
>>> + if (center_freq >= 5005)
>>> + return true;
>>> + return false;
>>> + default:
>>> + return false;
>>> + }
>>> +}
>>> +
>>> +/*
>>> * Some APs may send a country IE triplet for each channel they
>>> * support and while this is completely overkill and silly we still
>>> * need to support it. We avoid making a single rule for each channel
>>> @@ -532,7 +560,8 @@ static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range,
>>> * Returns 0 if the IE has been found to be invalid in the middle
>>> * somewhere.
>>> */
>>> -static int max_subband_chan(int orig_cur_chan,
>>> +static int max_subband_chan(enum ieee80211_band band,
>>> + int orig_cur_chan,
>>> int orig_end_channel,
>>> s8 orig_max_power,
>>> u8 **country_ie,
>>> @@ -541,7 +570,6 @@ static int max_subband_chan(int orig_cur_chan,
>>> u8 *triplets_start = *country_ie;
>>> u8 len_at_triplet = *country_ie_len;
>>> int end_subband_chan = orig_end_channel;
>>> - enum ieee80211_band band;
>>>
>>> /*
>>> * We'll deal with padding for the caller unless
>>> @@ -557,17 +585,14 @@ static int max_subband_chan(int orig_cur_chan,
>>> *country_ie += 3;
>>> *country_ie_len -= 3;
>>>
>>> - if (orig_cur_chan <= 14)
>>> - band = IEEE80211_BAND_2GHZ;
>>> - else
>>> - band = IEEE80211_BAND_5GHZ;
>>> + if (!chan_in_band(orig_cur_chan, band))
>>> + return 0;
>>>
>>> while (*country_ie_len >= 3) {
>>> int end_channel = 0;
>>> struct ieee80211_country_ie_triplet *triplet =
>>> (struct ieee80211_country_ie_triplet *) *country_ie;
>>> int cur_channel = 0, next_expected_chan;
>>> - enum ieee80211_band next_band = IEEE80211_BAND_2GHZ;
>>>
>>> /* means last triplet is completely unrelated to this one */
>>> if (triplet->ext.reg_extension_id >=
>>> @@ -592,6 +617,9 @@ static int max_subband_chan(int orig_cur_chan,
>>> if (triplet->chans.first_channel <= end_subband_chan)
>>> return 0;
>>>
>>> + if (!chan_in_band(triplet->chans.first_channel, band))
>>> + return 0;
>>> +
>>> /* 2 GHz */
>>> if (triplet->chans.first_channel <= 14) {
>>> end_channel = triplet->chans.first_channel +
>>> @@ -600,14 +628,10 @@ static int max_subband_chan(int orig_cur_chan,
>>> else {
>>> end_channel = triplet->chans.first_channel +
>>> (4 * (triplet->chans.num_channels - 1));
>>> - next_band = IEEE80211_BAND_5GHZ;
>>> }
>>>
>>> - if (band != next_band) {
>>> - *country_ie -= 3;
>>> - *country_ie_len += 3;
>>> - break;
>>> - }
>>> + if (!chan_in_band(end_channel, band))
>>> + return 0;
>>>
>>> if (orig_max_power != triplet->chans.max_power) {
>>> *country_ie -= 3;
>>> @@ -666,6 +690,7 @@ static int max_subband_chan(int orig_cur_chan,
>>> * with our userspace regulatory agent to get lower bounds.
>>> */
>>> static struct ieee80211_regdomain *country_ie_2_rd(
>>> + enum ieee80211_band band,
>>> u8 *country_ie,
>>> u8 country_ie_len,
>>> u32 *checksum)
>>> @@ -743,8 +768,11 @@ static struct ieee80211_regdomain *country_ie_2_rd(
>>> if (triplet->chans.num_channels == 0)
>>> return NULL;
>>>
>>> + if (!chan_in_band(triplet->chans.first_channel, band))
>>> + return NULL;
>>> +
>>> /* 2 GHz */
>>> - if (triplet->chans.first_channel <= 14)
>>> + if (band == IEEE80211_BAND_2GHZ)
>>> end_channel = triplet->chans.first_channel +
>>> triplet->chans.num_channels - 1;
>>> else
>>> @@ -767,7 +795,8 @@ static struct ieee80211_regdomain *country_ie_2_rd(
>>> * or for whatever reason sends triplets with multiple channels
>>> * separated when in fact they should be together.
>>> */
>>> - end_channel = max_subband_chan(cur_channel,
>>> + end_channel = max_subband_chan(band,
>>> + cur_channel,
>>> end_channel,
>>> triplet->chans.max_power,
>>> &country_ie,
>>> @@ -775,6 +804,9 @@ static struct ieee80211_regdomain *country_ie_2_rd(
>>> if (!end_channel)
>>> return NULL;
>>>
>>> + if (!chan_in_band(end_channel, band))
>>> + return NULL;
>>> +
>>> cur_sub_max_channel = end_channel;
>>>
>>> /* Basic sanity check */
>>> @@ -867,14 +899,15 @@ static struct ieee80211_regdomain *country_ie_2_rd(
>>> reg_rule->flags = flags;
>>>
>>> /* 2 GHz */
>>> - if (triplet->chans.first_channel <= 14)
>>> + if (band == IEEE80211_BAND_2GHZ)
>>> end_channel = triplet->chans.first_channel +
>>> triplet->chans.num_channels -1;
>>> else
>>> end_channel = triplet->chans.first_channel +
>>> (4 * (triplet->chans.num_channels - 1));
>>>
>>> - end_channel = max_subband_chan(triplet->chans.first_channel,
>>> + end_channel = max_subband_chan(band,
>>> + triplet->chans.first_channel,
>>> end_channel,
>>> triplet->chans.max_power,
>>> &country_ie,
>>> @@ -1981,8 +2014,9 @@ static bool reg_same_country_ie_hint(struct wiphy *wiphy,
>>> * therefore cannot iterate over the rdev list here.
>>> */
>>> void regulatory_hint_11d(struct wiphy *wiphy,
>>> - u8 *country_ie,
>>> - u8 country_ie_len)
>>> + enum ieee80211_band band,
>>> + u8 *country_ie,
>>> + u8 country_ie_len)
>>> {
>>> struct ieee80211_regdomain *rd = NULL;
>>> char alpha2[2];
>>> @@ -2028,7 +2062,7 @@ void regulatory_hint_11d(struct wiphy *wiphy,
>>> wiphy_idx_valid(last_request->wiphy_idx)))
>>> goto out;
>>>
>>> - rd = country_ie_2_rd(country_ie, country_ie_len, &checksum);
>>> + rd = country_ie_2_rd(band, country_ie, country_ie_len, &checksum);
>>> if (!rd) {
>>> REG_DBG_PRINT("cfg80211: Ignoring bogus country IE\n");
>>> goto out;
>>> diff --git a/net/wireless/reg.h b/net/wireless/reg.h
>>> index 3362c7c..3018508 100644
>>> --- a/net/wireless/reg.h
>>> +++ b/net/wireless/reg.h
>>> @@ -41,14 +41,25 @@ int regulatory_hint_found_beacon(struct wiphy *wiphy,
>>> * regulatory_hint_11d - hints a country IE as a regulatory domain
>>> * @wiphy: the wireless device giving the hint (used only for reporting
>>> * conflicts)
>>> + * @band: the band on which the country IE was received on. This determines
>>> + * the band we'll process the country IE channel triplets for.
>>> * @country_ie: pointer to the country IE
>>> * @country_ie_len: length of the country IE
>>> *
>>> * We will intersect the rd with the what CRDA tells us should apply
>>> * for the alpha2 this country IE belongs to, this prevents APs from
>>> * sending us incorrect or outdated information against a country.
>>> + *
>>> + * The AP is expected to provide Country IE channel triplets for the
>>> + * band it is on. It is technically possible for APs to send channel
>>> + * country IE triplets even for channels outside of the band they are
>>> + * in but for that they would have to use the regulatory extension
>>> + * in combination with a triplet but this behaviour is currently
>>> + * not observed. For this reason if a triplet is seen with channel
>>> + * information for a band the BSS is not present in it will be ignored.
>>> */
>>> void regulatory_hint_11d(struct wiphy *wiphy,
>>> + enum ieee80211_band band,
>>> u8 *country_ie,
>>> u8 country_ie_len);
>>>
>>> diff --git a/net/wireless/sme.c b/net/wireless/sme.c
>>> index 2333d78..2ce5e16 100644
>>> --- a/net/wireless/sme.c
>>> +++ b/net/wireless/sme.c
>>> @@ -454,6 +454,7 @@ void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
>>> * - and country_ie[1] which is the IE length
>>> */
>>> regulatory_hint_11d(wdev->wiphy,
>>> + bss->channel->band,
>>> country_ie + 2,
>>> country_ie[1]);
>>> }
>>>
>>>
>> I think the channel conversion could be improved (we could directly
>> compare the channel number with valid values as defined in
>> IEEE802.11-2007 without converting them to a center frequency), but it
>> could be done in a latter patch. So far :
>>
>
> Well so channel conversion really needs more work than that
> actually, it should eventually address regulatory extension
> stuff, which I've been avoiding for long now.
>
> Luis
>
>
Agreed! We will address that later.
Regards,
Benoit
On Sat, Jan 16, 2010 at 01:55:21AM -0800, Benoit PAPILLAULT wrote:
> Luis R. Rodriguez a ?crit :
> > In practice APs do not send country IE channel triplets for channels
> > the AP is not operating on and if they were to do so they would have
> > to use the regulatory extension which we currently do not process.
> > No AP has been seen in practice that does this though so just drop
> > those country IEs.
> >
> > Additionally it has been noted the first series of country IE
> > channels triplets are specific to the band the AP sends. Propagate
> > the band on which the country IE was found on reject the country
> > IE then if the triplets are ever oustide of the band.
> >
> > Although we now won't process country IE information with multiple
> > band information we leave the intersection work as is as it is
> > technically possible for someone to want to eventually process these
> > type of country IEs with regulatory extensions.
> >
> > Cc: Jouni Malinen <[email protected]>
> > Cc: Johannes Berg <[email protected]>
> > Signed-off-by: Luis R. Rodriguez <[email protected]>
> > ---
> >
> > This goes out tested now.
> >
> > net/wireless/reg.c | 74 ++++++++++++++++++++++++++++++++++++++--------------
> > net/wireless/reg.h | 11 +++++++
> > net/wireless/sme.c | 1 +
> > 3 files changed, 66 insertions(+), 20 deletions(-)
> >
> > diff --git a/net/wireless/reg.c b/net/wireless/reg.c
> > index 5b03ca7..7242121 100644
> > --- a/net/wireless/reg.c
> > +++ b/net/wireless/reg.c
> > @@ -485,6 +485,34 @@ static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range,
> > }
> >
> > /*
> > + * This is a work around for sanity checking ieee80211_channel_to_frequency()'s
> > + * work. ieee80211_channel_to_frequency() can for example currently provide a
> > + * 2 GHz channel when in fact a 5 GHz channel was desired. An example would be
> > + * an AP providing channel 8 on a country IE triplet when it sent this on the
> > + * 5 GHz band, that channel is designed to be channel 8 on 5 GHz, not a 2 GHz
> > + * channel.
> > + *
> > + * This can be removed once ieee80211_channel_to_frequency() takes in a band.
> > + */
> > +static bool chan_in_band(int chan, enum ieee80211_band band)
> > +{
> > + int center_freq = ieee80211_channel_to_frequency(chan);
> > +
> > + switch (band) {
> > + case IEEE80211_BAND_2GHZ:
> > + if (center_freq <= 2484)
> > + return true;
> > + return false;
> > + case IEEE80211_BAND_5GHZ:
> > + if (center_freq >= 5005)
> > + return true;
> > + return false;
> > + default:
> > + return false;
> > + }
> > +}
> > +
> > +/*
> > * Some APs may send a country IE triplet for each channel they
> > * support and while this is completely overkill and silly we still
> > * need to support it. We avoid making a single rule for each channel
> > @@ -532,7 +560,8 @@ static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range,
> > * Returns 0 if the IE has been found to be invalid in the middle
> > * somewhere.
> > */
> > -static int max_subband_chan(int orig_cur_chan,
> > +static int max_subband_chan(enum ieee80211_band band,
> > + int orig_cur_chan,
> > int orig_end_channel,
> > s8 orig_max_power,
> > u8 **country_ie,
> > @@ -541,7 +570,6 @@ static int max_subband_chan(int orig_cur_chan,
> > u8 *triplets_start = *country_ie;
> > u8 len_at_triplet = *country_ie_len;
> > int end_subband_chan = orig_end_channel;
> > - enum ieee80211_band band;
> >
> > /*
> > * We'll deal with padding for the caller unless
> > @@ -557,17 +585,14 @@ static int max_subband_chan(int orig_cur_chan,
> > *country_ie += 3;
> > *country_ie_len -= 3;
> >
> > - if (orig_cur_chan <= 14)
> > - band = IEEE80211_BAND_2GHZ;
> > - else
> > - band = IEEE80211_BAND_5GHZ;
> > + if (!chan_in_band(orig_cur_chan, band))
> > + return 0;
> >
> > while (*country_ie_len >= 3) {
> > int end_channel = 0;
> > struct ieee80211_country_ie_triplet *triplet =
> > (struct ieee80211_country_ie_triplet *) *country_ie;
> > int cur_channel = 0, next_expected_chan;
> > - enum ieee80211_band next_band = IEEE80211_BAND_2GHZ;
> >
> > /* means last triplet is completely unrelated to this one */
> > if (triplet->ext.reg_extension_id >=
> > @@ -592,6 +617,9 @@ static int max_subband_chan(int orig_cur_chan,
> > if (triplet->chans.first_channel <= end_subband_chan)
> > return 0;
> >
> > + if (!chan_in_band(triplet->chans.first_channel, band))
> > + return 0;
> > +
> > /* 2 GHz */
> > if (triplet->chans.first_channel <= 14) {
> > end_channel = triplet->chans.first_channel +
> > @@ -600,14 +628,10 @@ static int max_subband_chan(int orig_cur_chan,
> > else {
> > end_channel = triplet->chans.first_channel +
> > (4 * (triplet->chans.num_channels - 1));
> > - next_band = IEEE80211_BAND_5GHZ;
> > }
> >
> > - if (band != next_band) {
> > - *country_ie -= 3;
> > - *country_ie_len += 3;
> > - break;
> > - }
> > + if (!chan_in_band(end_channel, band))
> > + return 0;
> >
> > if (orig_max_power != triplet->chans.max_power) {
> > *country_ie -= 3;
> > @@ -666,6 +690,7 @@ static int max_subband_chan(int orig_cur_chan,
> > * with our userspace regulatory agent to get lower bounds.
> > */
> > static struct ieee80211_regdomain *country_ie_2_rd(
> > + enum ieee80211_band band,
> > u8 *country_ie,
> > u8 country_ie_len,
> > u32 *checksum)
> > @@ -743,8 +768,11 @@ static struct ieee80211_regdomain *country_ie_2_rd(
> > if (triplet->chans.num_channels == 0)
> > return NULL;
> >
> > + if (!chan_in_band(triplet->chans.first_channel, band))
> > + return NULL;
> > +
> > /* 2 GHz */
> > - if (triplet->chans.first_channel <= 14)
> > + if (band == IEEE80211_BAND_2GHZ)
> > end_channel = triplet->chans.first_channel +
> > triplet->chans.num_channels - 1;
> > else
> > @@ -767,7 +795,8 @@ static struct ieee80211_regdomain *country_ie_2_rd(
> > * or for whatever reason sends triplets with multiple channels
> > * separated when in fact they should be together.
> > */
> > - end_channel = max_subband_chan(cur_channel,
> > + end_channel = max_subband_chan(band,
> > + cur_channel,
> > end_channel,
> > triplet->chans.max_power,
> > &country_ie,
> > @@ -775,6 +804,9 @@ static struct ieee80211_regdomain *country_ie_2_rd(
> > if (!end_channel)
> > return NULL;
> >
> > + if (!chan_in_band(end_channel, band))
> > + return NULL;
> > +
> > cur_sub_max_channel = end_channel;
> >
> > /* Basic sanity check */
> > @@ -867,14 +899,15 @@ static struct ieee80211_regdomain *country_ie_2_rd(
> > reg_rule->flags = flags;
> >
> > /* 2 GHz */
> > - if (triplet->chans.first_channel <= 14)
> > + if (band == IEEE80211_BAND_2GHZ)
> > end_channel = triplet->chans.first_channel +
> > triplet->chans.num_channels -1;
> > else
> > end_channel = triplet->chans.first_channel +
> > (4 * (triplet->chans.num_channels - 1));
> >
> > - end_channel = max_subband_chan(triplet->chans.first_channel,
> > + end_channel = max_subband_chan(band,
> > + triplet->chans.first_channel,
> > end_channel,
> > triplet->chans.max_power,
> > &country_ie,
> > @@ -1981,8 +2014,9 @@ static bool reg_same_country_ie_hint(struct wiphy *wiphy,
> > * therefore cannot iterate over the rdev list here.
> > */
> > void regulatory_hint_11d(struct wiphy *wiphy,
> > - u8 *country_ie,
> > - u8 country_ie_len)
> > + enum ieee80211_band band,
> > + u8 *country_ie,
> > + u8 country_ie_len)
> > {
> > struct ieee80211_regdomain *rd = NULL;
> > char alpha2[2];
> > @@ -2028,7 +2062,7 @@ void regulatory_hint_11d(struct wiphy *wiphy,
> > wiphy_idx_valid(last_request->wiphy_idx)))
> > goto out;
> >
> > - rd = country_ie_2_rd(country_ie, country_ie_len, &checksum);
> > + rd = country_ie_2_rd(band, country_ie, country_ie_len, &checksum);
> > if (!rd) {
> > REG_DBG_PRINT("cfg80211: Ignoring bogus country IE\n");
> > goto out;
> > diff --git a/net/wireless/reg.h b/net/wireless/reg.h
> > index 3362c7c..3018508 100644
> > --- a/net/wireless/reg.h
> > +++ b/net/wireless/reg.h
> > @@ -41,14 +41,25 @@ int regulatory_hint_found_beacon(struct wiphy *wiphy,
> > * regulatory_hint_11d - hints a country IE as a regulatory domain
> > * @wiphy: the wireless device giving the hint (used only for reporting
> > * conflicts)
> > + * @band: the band on which the country IE was received on. This determines
> > + * the band we'll process the country IE channel triplets for.
> > * @country_ie: pointer to the country IE
> > * @country_ie_len: length of the country IE
> > *
> > * We will intersect the rd with the what CRDA tells us should apply
> > * for the alpha2 this country IE belongs to, this prevents APs from
> > * sending us incorrect or outdated information against a country.
> > + *
> > + * The AP is expected to provide Country IE channel triplets for the
> > + * band it is on. It is technically possible for APs to send channel
> > + * country IE triplets even for channels outside of the band they are
> > + * in but for that they would have to use the regulatory extension
> > + * in combination with a triplet but this behaviour is currently
> > + * not observed. For this reason if a triplet is seen with channel
> > + * information for a band the BSS is not present in it will be ignored.
> > */
> > void regulatory_hint_11d(struct wiphy *wiphy,
> > + enum ieee80211_band band,
> > u8 *country_ie,
> > u8 country_ie_len);
> >
> > diff --git a/net/wireless/sme.c b/net/wireless/sme.c
> > index 2333d78..2ce5e16 100644
> > --- a/net/wireless/sme.c
> > +++ b/net/wireless/sme.c
> > @@ -454,6 +454,7 @@ void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
> > * - and country_ie[1] which is the IE length
> > */
> > regulatory_hint_11d(wdev->wiphy,
> > + bss->channel->band,
> > country_ie + 2,
> > country_ie[1]);
> > }
> >
>
> I think the channel conversion could be improved (we could directly
> compare the channel number with valid values as defined in
> IEEE802.11-2007 without converting them to a center frequency), but it
> could be done in a latter patch. So far :
Well so channel conversion really needs more work than that
actually, it should eventually address regulatory extension
stuff, which I've been avoiding for long now.
Luis
Luis R. Rodriguez a ?crit :
> In practice APs do not send country IE channel triplets for channels
> the AP is not operating on and if they were to do so they would have
> to use the regulatory extension which we currently do not process.
> No AP has been seen in practice that does this though so just drop
> those country IEs.
>
> Additionally it has been noted the first series of country IE
> channels triplets are specific to the band the AP sends. Propagate
> the band on which the country IE was found on reject the country
> IE then if the triplets are ever oustide of the band.
>
> Although we now won't process country IE information with multiple
> band information we leave the intersection work as is as it is
> technically possible for someone to want to eventually process these
> type of country IEs with regulatory extensions.
>
> Cc: Jouni Malinen <[email protected]>
> Cc: Johannes Berg <[email protected]>
> Signed-off-by: Luis R. Rodriguez <[email protected]>
> ---
>
> This goes out tested now.
>
> net/wireless/reg.c | 74 ++++++++++++++++++++++++++++++++++++++--------------
> net/wireless/reg.h | 11 +++++++
> net/wireless/sme.c | 1 +
> 3 files changed, 66 insertions(+), 20 deletions(-)
>
> diff --git a/net/wireless/reg.c b/net/wireless/reg.c
> index 5b03ca7..7242121 100644
> --- a/net/wireless/reg.c
> +++ b/net/wireless/reg.c
> @@ -485,6 +485,34 @@ static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range,
> }
>
> /*
> + * This is a work around for sanity checking ieee80211_channel_to_frequency()'s
> + * work. ieee80211_channel_to_frequency() can for example currently provide a
> + * 2 GHz channel when in fact a 5 GHz channel was desired. An example would be
> + * an AP providing channel 8 on a country IE triplet when it sent this on the
> + * 5 GHz band, that channel is designed to be channel 8 on 5 GHz, not a 2 GHz
> + * channel.
> + *
> + * This can be removed once ieee80211_channel_to_frequency() takes in a band.
> + */
> +static bool chan_in_band(int chan, enum ieee80211_band band)
> +{
> + int center_freq = ieee80211_channel_to_frequency(chan);
> +
> + switch (band) {
> + case IEEE80211_BAND_2GHZ:
> + if (center_freq <= 2484)
> + return true;
> + return false;
> + case IEEE80211_BAND_5GHZ:
> + if (center_freq >= 5005)
> + return true;
> + return false;
> + default:
> + return false;
> + }
> +}
> +
> +/*
> * Some APs may send a country IE triplet for each channel they
> * support and while this is completely overkill and silly we still
> * need to support it. We avoid making a single rule for each channel
> @@ -532,7 +560,8 @@ static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range,
> * Returns 0 if the IE has been found to be invalid in the middle
> * somewhere.
> */
> -static int max_subband_chan(int orig_cur_chan,
> +static int max_subband_chan(enum ieee80211_band band,
> + int orig_cur_chan,
> int orig_end_channel,
> s8 orig_max_power,
> u8 **country_ie,
> @@ -541,7 +570,6 @@ static int max_subband_chan(int orig_cur_chan,
> u8 *triplets_start = *country_ie;
> u8 len_at_triplet = *country_ie_len;
> int end_subband_chan = orig_end_channel;
> - enum ieee80211_band band;
>
> /*
> * We'll deal with padding for the caller unless
> @@ -557,17 +585,14 @@ static int max_subband_chan(int orig_cur_chan,
> *country_ie += 3;
> *country_ie_len -= 3;
>
> - if (orig_cur_chan <= 14)
> - band = IEEE80211_BAND_2GHZ;
> - else
> - band = IEEE80211_BAND_5GHZ;
> + if (!chan_in_band(orig_cur_chan, band))
> + return 0;
>
> while (*country_ie_len >= 3) {
> int end_channel = 0;
> struct ieee80211_country_ie_triplet *triplet =
> (struct ieee80211_country_ie_triplet *) *country_ie;
> int cur_channel = 0, next_expected_chan;
> - enum ieee80211_band next_band = IEEE80211_BAND_2GHZ;
>
> /* means last triplet is completely unrelated to this one */
> if (triplet->ext.reg_extension_id >=
> @@ -592,6 +617,9 @@ static int max_subband_chan(int orig_cur_chan,
> if (triplet->chans.first_channel <= end_subband_chan)
> return 0;
>
> + if (!chan_in_band(triplet->chans.first_channel, band))
> + return 0;
> +
> /* 2 GHz */
> if (triplet->chans.first_channel <= 14) {
> end_channel = triplet->chans.first_channel +
> @@ -600,14 +628,10 @@ static int max_subband_chan(int orig_cur_chan,
> else {
> end_channel = triplet->chans.first_channel +
> (4 * (triplet->chans.num_channels - 1));
> - next_band = IEEE80211_BAND_5GHZ;
> }
>
> - if (band != next_band) {
> - *country_ie -= 3;
> - *country_ie_len += 3;
> - break;
> - }
> + if (!chan_in_band(end_channel, band))
> + return 0;
>
> if (orig_max_power != triplet->chans.max_power) {
> *country_ie -= 3;
> @@ -666,6 +690,7 @@ static int max_subband_chan(int orig_cur_chan,
> * with our userspace regulatory agent to get lower bounds.
> */
> static struct ieee80211_regdomain *country_ie_2_rd(
> + enum ieee80211_band band,
> u8 *country_ie,
> u8 country_ie_len,
> u32 *checksum)
> @@ -743,8 +768,11 @@ static struct ieee80211_regdomain *country_ie_2_rd(
> if (triplet->chans.num_channels == 0)
> return NULL;
>
> + if (!chan_in_band(triplet->chans.first_channel, band))
> + return NULL;
> +
> /* 2 GHz */
> - if (triplet->chans.first_channel <= 14)
> + if (band == IEEE80211_BAND_2GHZ)
> end_channel = triplet->chans.first_channel +
> triplet->chans.num_channels - 1;
> else
> @@ -767,7 +795,8 @@ static struct ieee80211_regdomain *country_ie_2_rd(
> * or for whatever reason sends triplets with multiple channels
> * separated when in fact they should be together.
> */
> - end_channel = max_subband_chan(cur_channel,
> + end_channel = max_subband_chan(band,
> + cur_channel,
> end_channel,
> triplet->chans.max_power,
> &country_ie,
> @@ -775,6 +804,9 @@ static struct ieee80211_regdomain *country_ie_2_rd(
> if (!end_channel)
> return NULL;
>
> + if (!chan_in_band(end_channel, band))
> + return NULL;
> +
> cur_sub_max_channel = end_channel;
>
> /* Basic sanity check */
> @@ -867,14 +899,15 @@ static struct ieee80211_regdomain *country_ie_2_rd(
> reg_rule->flags = flags;
>
> /* 2 GHz */
> - if (triplet->chans.first_channel <= 14)
> + if (band == IEEE80211_BAND_2GHZ)
> end_channel = triplet->chans.first_channel +
> triplet->chans.num_channels -1;
> else
> end_channel = triplet->chans.first_channel +
> (4 * (triplet->chans.num_channels - 1));
>
> - end_channel = max_subband_chan(triplet->chans.first_channel,
> + end_channel = max_subband_chan(band,
> + triplet->chans.first_channel,
> end_channel,
> triplet->chans.max_power,
> &country_ie,
> @@ -1981,8 +2014,9 @@ static bool reg_same_country_ie_hint(struct wiphy *wiphy,
> * therefore cannot iterate over the rdev list here.
> */
> void regulatory_hint_11d(struct wiphy *wiphy,
> - u8 *country_ie,
> - u8 country_ie_len)
> + enum ieee80211_band band,
> + u8 *country_ie,
> + u8 country_ie_len)
> {
> struct ieee80211_regdomain *rd = NULL;
> char alpha2[2];
> @@ -2028,7 +2062,7 @@ void regulatory_hint_11d(struct wiphy *wiphy,
> wiphy_idx_valid(last_request->wiphy_idx)))
> goto out;
>
> - rd = country_ie_2_rd(country_ie, country_ie_len, &checksum);
> + rd = country_ie_2_rd(band, country_ie, country_ie_len, &checksum);
> if (!rd) {
> REG_DBG_PRINT("cfg80211: Ignoring bogus country IE\n");
> goto out;
> diff --git a/net/wireless/reg.h b/net/wireless/reg.h
> index 3362c7c..3018508 100644
> --- a/net/wireless/reg.h
> +++ b/net/wireless/reg.h
> @@ -41,14 +41,25 @@ int regulatory_hint_found_beacon(struct wiphy *wiphy,
> * regulatory_hint_11d - hints a country IE as a regulatory domain
> * @wiphy: the wireless device giving the hint (used only for reporting
> * conflicts)
> + * @band: the band on which the country IE was received on. This determines
> + * the band we'll process the country IE channel triplets for.
> * @country_ie: pointer to the country IE
> * @country_ie_len: length of the country IE
> *
> * We will intersect the rd with the what CRDA tells us should apply
> * for the alpha2 this country IE belongs to, this prevents APs from
> * sending us incorrect or outdated information against a country.
> + *
> + * The AP is expected to provide Country IE channel triplets for the
> + * band it is on. It is technically possible for APs to send channel
> + * country IE triplets even for channels outside of the band they are
> + * in but for that they would have to use the regulatory extension
> + * in combination with a triplet but this behaviour is currently
> + * not observed. For this reason if a triplet is seen with channel
> + * information for a band the BSS is not present in it will be ignored.
> */
> void regulatory_hint_11d(struct wiphy *wiphy,
> + enum ieee80211_band band,
> u8 *country_ie,
> u8 country_ie_len);
>
> diff --git a/net/wireless/sme.c b/net/wireless/sme.c
> index 2333d78..2ce5e16 100644
> --- a/net/wireless/sme.c
> +++ b/net/wireless/sme.c
> @@ -454,6 +454,7 @@ void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
> * - and country_ie[1] which is the IE length
> */
> regulatory_hint_11d(wdev->wiphy,
> + bss->channel->band,
> country_ie + 2,
> country_ie[1]);
> }
>
I think the channel conversion could be improved (we could directly
compare the channel number with valid values as defined in
IEEE802.11-2007 without converting them to a center frequency), but it
could be done in a latter patch. So far :
Acked-by: Benoit Papillault <[email protected]>
Regards,
Benoit