From: Sujith Manoharan <[email protected]>
TX_IQ_ON_AGC_CAL should not be enabled for AR9340. TX-IQ calibration
is run as part of AGC calibration only for AR9485, AR9462 and AR9565.
For the others (AR9300, AR9330, AR9340), TX-IQ cal is done independent
of AGC-cal.
Signed-off-by: Sujith Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9003_calib.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 598b847..303e40d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -326,7 +326,7 @@ static void ar9003_hw_init_cal_settings(struct ath_hw *ah)
if (AR_SREV_9300_20_OR_LATER(ah)) {
ah->enabled_cals |= TX_IQ_CAL;
- if (AR_SREV_9485_OR_LATER(ah))
+ if (AR_SREV_9485_OR_LATER(ah) && !AR_SREV_9340(ah))
ah->enabled_cals |= TX_IQ_ON_AGC_CAL;
}
--
1.8.1