AP used : BELKIN F5D7633-4
AP Security configuration:
Security Mode - WPA/WPA2-Personal(PSK)
Authentication - WPA-PSK + WPA2-PSK
Encryption - TKIP
Wifi client Host System details:
Linux (kernel version 3.6.8)
ARM
Configuration of wifi client:
modprobe rtl8192cu
wpa_supplicant -g/var/run/wpa_supplicant-global -B
wpa_cli -g/var/run/wpa_supplicant-global interface_add wlan0 "" nl80211
/var/run/wpa_supplicant
wpa_cli -iwlan0 -a/usr/bin/wifi-action -B
sleep 1
wpa_cli -iwlan0 add_network
wpa_cli -iwlan0 set_network 0 ssid '"belkin54g"'
wpa_cli -iwlan0 set_network 0 key_mgmt WPA-PSK
wpa_cli -iwlan0 set_network 0 proto WPA
wpa_cli -iwlan0 set_network 0 pairwise TKIP
wpa_cli -iwlan0 set_network 0 group TKIP
wpa_cli -iwlan0 set_network 0 psk '"Test123456"'
sleep 1
wpa_cli -iwlan0 enable_network 0
log after executing above configuration:
# wpa_cli -iwlan0 enable_network 0
OK
# wlan0: authenticate with 00:17:3f:15:8f:55
wlan0: send auth to 00:17:3f:15:8f:55 (try 1/3)
wlan0: authenticated
rtl8192cu 1-1:1.0: wlan0: disabling HT due to WEP/TKIP use
rtl8192cu 1-1:1.0: wlan0: disabling HT as WMM/QoS is not supported
wlan0: associate with 00:17:3f:15:8f:55 (try 1/3)
wlan0: RX AssocResp from 00:17:3f:15:8f:55 (capab=0x411 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: dropped frame to 00:17:3f:15:8f:55 (unauthorized port)
wlan0: dropped frame to 00:17:3f:15:8f:55 (unauthorized port)
wlan0: dropped frame to 00:17:3f:15:8f:55 (unauthorized port)
wlan0: dropped frame to 00:17:3f:15:8f:55 (unauthorized port)
wlan0: dropped frame to 00:17:3f:15:8f:55 (unauthorized port)
wlan0: dropped frame to 00:17:3f:15:8f:55 (unauthorized port)
wlan0: disassociating from 00:17:3f:15:8f:55 by local choice (reason=3)
cfg80211: Calling CRDA for country: US
wlan0: deauthenticating from 00:17:3f:15:8f:55 by local choice (reason=3)
wlan0: authenticate with 00:17:3f:15:8f:55
wlan0: send auth to 00:17:3f:15:8f:55 (try 1/3)
wlan0: authenticated
rtl8192cu 1-1:1.0: wlan0: disabling HT due to WEP/TKIP use
rtl8192cu 1-1:1.0: wlan0: disabling HT as WMM/QoS is not supported
wlan0: associate with 00:17:3f:15:8f:55 (try 1/3)
wlan0: RX AssocResp from 00:17:3f:15:8f:55 (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: disassociating from 00:17:3f:15:8f:55 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: deauthenticating from 00:17:3f:15:8f:55 by local choice (reason=3)
wlan0: authenticate with 00:17:3f:15:8f:55
wlan0: send auth to 00:17:3f:15:8f:55 (try 1/3)
wlan0: authenticated
rtl8192cu 1-1:1.0: wlan0: disabling HT due to WEP/TKIP use
rtl8192cu 1-1:1.0: wlan0: disabling HT as WMM/QoS is not supported
wlan0: associate with 00:17:3f:15:8f:55 (try 1/3)
wlan0: RX AssocResp from 00:17:3f:15:8f:55 (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: disassociating from 00:17:3f:15:8f:55 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: deauthenticating from 00:17:3f:15:8f:55 by local choice (reason=3)
wlan0: authenticate with 00:17:3f:15:8f:55
wlan0: send auth to 00:17:3f:15:8f:55 (try 1/3)
wlan0: authenticated
rtl8192cu 1-1:1.0: wlan0: disabling HT due to WEP/TKIP use
rtl8192cu 1-1:1.0: wlan0: disabling HT as WMM/QoS is not supported
wlan0: associate with 00:17:3f:15:8f:55 (try 1/3)
wlan0: RX AssocResp from 00:17:3f:15:8f:55 (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: disassociating from 00:17:3f:15:8f:55 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: deauthenticating from 00:17:3f:15:8f:55 by local choice (reason=3)
wlan0: authenticate with 00:17:3f:15:8f:55
wlan0: send auth to 00:17:3f:15:8f:55 (try 1/3)
wlan0: authenticated
rtl8192cu 1-1:1.0: wlan0: disabling HT due to WEP/TKIP use
rtl8192cu 1-1:1.0: wlan0: disabling HT as WMM/QoS is not supported
wlan0: associate with 00:17:3f:15:8f:55 (try 1/3)
wlan0: RX AssocResp from 00:17:3f:15:8f:55 (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: disassociating from 00:17:3f:15:8f:55 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: deauthenticating from 00:17:3f:15:8f:55 by local choice (reason=3)
wlan0: authenticate with 00:17:3f:15:8f:55
wlan0: send auth to 00:17:3f:15:8f:55 (try 1/3)
wlan0: authenticated
The same configuration on Linux ( kernel version 3.0.0 on X86 platform) is
working fine and connection to the AP.
Any information on why this is happening or how to fix will be useful.
Thanks,
Vishnu.