From: Amitkumar Karwar <[email protected]>
Some u32 variables in sdio.c are used to store/pass u8 values.
Replace them with u8 variables.
Signed-off-by: Amitkumar Karwar <[email protected]>
Signed-off-by: Bing Zhao <[email protected]>
---
drivers/net/wireless/mwifiex/sdio.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index 022e9fd..e4357a6 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -294,13 +294,13 @@ static struct sdio_driver mwifiex_sdio = {
* This function writes data into SDIO card register.
*/
static int
-mwifiex_write_reg(struct mwifiex_adapter *adapter, u32 reg, u32 data)
+mwifiex_write_reg(struct mwifiex_adapter *adapter, u32 reg, u8 data)
{
struct sdio_mmc_card *card = adapter->card;
int ret = -1;
sdio_claim_host(card->func);
- sdio_writeb(card->func, (u8) data, reg, &ret);
+ sdio_writeb(card->func, data, reg, &ret);
sdio_release_host(card->func);
return ret;
@@ -310,7 +310,7 @@ mwifiex_write_reg(struct mwifiex_adapter *adapter, u32 reg, u32 data)
* This function reads data from SDIO card register.
*/
static int
-mwifiex_read_reg(struct mwifiex_adapter *adapter, u32 reg, u32 *data)
+mwifiex_read_reg(struct mwifiex_adapter *adapter, u32 reg, u8 *data)
{
struct sdio_mmc_card *card = adapter->card;
int ret = -1;
@@ -421,7 +421,7 @@ static int mwifiex_pm_wakeup_card_complete(struct mwifiex_adapter *adapter)
*/
static int mwifiex_init_sdio_ioport(struct mwifiex_adapter *adapter)
{
- u32 reg;
+ u8 reg;
struct sdio_mmc_card *card = adapter->card;
adapter->ioport = 0;
@@ -580,7 +580,7 @@ mwifiex_sdio_poll_card_status(struct mwifiex_adapter *adapter, u8 bits)
{
struct sdio_mmc_card *card = adapter->card;
u32 tries;
- u32 cs;
+ u8 cs;
for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
if (mwifiex_read_reg(adapter, card->reg->poll_reg, &cs))
@@ -604,7 +604,7 @@ mwifiex_sdio_read_fw_status(struct mwifiex_adapter *adapter, u16 *dat)
{
struct sdio_mmc_card *card = adapter->card;
const struct mwifiex_sdio_card_reg *reg = card->reg;
- u32 fws0, fws1;
+ u8 fws0, fws1;
if (mwifiex_read_reg(adapter, reg->status_reg_0, &fws0))
return -1;
@@ -625,14 +625,14 @@ mwifiex_sdio_read_fw_status(struct mwifiex_adapter *adapter, u16 *dat)
*/
static int mwifiex_sdio_disable_host_int(struct mwifiex_adapter *adapter)
{
- u32 host_int_mask;
+ u8 host_int_mask, host_int_disable = HOST_INT_DISABLE;
/* Read back the host_int_mask register */
if (mwifiex_read_reg(adapter, HOST_INT_MASK_REG, &host_int_mask))
return -1;
/* Update with the mask and write back to the register */
- host_int_mask &= ~HOST_INT_DISABLE;
+ host_int_mask &= ~host_int_disable;
if (mwifiex_write_reg(adapter, HOST_INT_MASK_REG, host_int_mask)) {
dev_err(adapter->dev, "disable host interrupt failed\n");
@@ -712,7 +712,7 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter,
u8 *firmware = fw->fw_buf;
u32 firmware_len = fw->fw_len;
u32 offset = 0;
- u32 base0, base1;
+ u8 base0, base1;
u8 *fwbuf;
u16 len = 0;
u32 txlen, tx_blocks = 0, tries;
@@ -854,7 +854,7 @@ static int mwifiex_check_fw_status(struct mwifiex_adapter *adapter,
int ret = 0;
u16 firmware_stat;
u32 tries;
- u32 winner_status;
+ u8 winner_status;
/* Wait for firmware initialization event */
for (tries = 0; tries < poll_num; tries++) {
@@ -889,7 +889,7 @@ static int mwifiex_check_fw_status(struct mwifiex_adapter *adapter,
static void mwifiex_interrupt_status(struct mwifiex_adapter *adapter)
{
struct sdio_mmc_card *card = adapter->card;
- u32 sdio_ireg;
+ u8 sdio_ireg;
unsigned long flags;
if (mwifiex_read_data_sync(adapter, card->mp_regs,
@@ -1284,7 +1284,7 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
if (mwifiex_sdio_card_to_host_mp_aggr(adapter, skb,
port)) {
- u32 cr = 0;
+ u8 cr = 0;
dev_err(adapter->dev, "card_to_host_mpa failed:"
" int status=%#x\n", sdio_ireg);
@@ -1644,7 +1644,7 @@ static int mwifiex_init_sdio(struct mwifiex_adapter *adapter)
struct sdio_mmc_card *card = adapter->card;
const struct mwifiex_sdio_card_reg *reg = card->reg;
int ret;
- u32 sdio_ireg;
+ u8 sdio_ireg;
/*
* Read the HOST_INT_STATUS_REG for ACK the first interrupt got
--
1.8.2.3