From: Sujith Manoharan <[email protected]>
CUS198 is a card based on AR9485. There are differences
between the base reference design HB125 and CUS198.
Identify such cards based on the PCI subsystem IDs and
set HW parameters appropriately.
Signed-off-by: Sujith Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 18 +++++++++++++---
drivers/net/wireless/ath/ath9k/ath9k.h | 3 +++
drivers/net/wireless/ath/ath9k/hw.h | 4 ++++
drivers/net/wireless/ath/ath9k/init.c | 21 +++++++++++++++++++
drivers/net/wireless/ath/ath9k/pci.c | 29 ++++++++++++++++++++++++++
5 files changed, 72 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 25b8bbb..9a00bc0 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3563,16 +3563,22 @@ static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz)
{
struct ath9k_hw_capabilities *pCap = &ah->caps;
int chain;
- u32 regval, value;
+ u32 regval, value, gpio;
static const u32 switch_chain_reg[AR9300_MAX_CHAINS] = {
AR_PHY_SWITCH_CHAIN_0,
AR_PHY_SWITCH_CHAIN_1,
AR_PHY_SWITCH_CHAIN_2,
};
- if (AR_SREV_9485(ah) && (ar9003_hw_get_rx_gain_idx(ah) == 0))
+ if (AR_SREV_9485(ah) && (ar9003_hw_get_rx_gain_idx(ah) == 0)) {
+ if (ah->config.xlna_gpio)
+ gpio = ah->config.xlna_gpio;
+ else
+ gpio = AR9300_EXT_LNA_CTL_GPIO_AR9485;
+
ath9k_hw_cfg_output(ah, AR9300_EXT_LNA_CTL_GPIO_AR9485,
AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED);
+ }
value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz);
@@ -3800,7 +3806,13 @@ static void ar9003_hw_atten_apply(struct ath_hw *ah, struct ath9k_channel *chan)
REG_RMW_FIELD(ah, ext_atten_reg[i],
AR_PHY_EXT_ATTEN_CTL_XATTEN1_DB, value);
- value = ar9003_hw_atten_chain_get_margin(ah, i, chan);
+ if (AR_SREV_9485(ah) &&
+ (ar9003_hw_get_rx_gain_idx(ah) == 0) &&
+ ah->config.xatten_margin_cfg)
+ value = 5;
+ else
+ value = ar9003_hw_atten_chain_get_margin(ah, i, chan);
+
REG_RMW_FIELD(ah, ext_atten_reg[i],
AR_PHY_EXT_ATTEN_CTL_XATTEN1_MARGIN,
value);
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index a6e666b..74965ee 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -631,6 +631,8 @@ void ath_ant_comb_update(struct ath_softc *sc);
/* Main driver core */
/********************/
+#define ATH9K_PCI_CUS198 0x0001
+
/*
* Default cache line size, in bytes.
* Used when PCI device not fully initialized by bootrom/BIOS
@@ -715,6 +717,7 @@ struct ath_softc {
unsigned int hw_busy_count;
unsigned long sc_flags;
+ unsigned long driver_data;
u32 intrstatus;
u16 ps_flags; /* PS_* */
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 7d259b7..ed7d4fc 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -307,6 +307,10 @@ struct ath9k_ops_config {
u16 spurchans[AR_EEPROM_MODAL_SPURS][2];
u8 max_txtrig_level;
u16 ani_poll_interval; /* ANI poll interval in ms */
+
+ /* Platform specific config */
+ u32 xlna_gpio;
+ bool xatten_margin_cfg;
};
enum ath9k_int {
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 818f22d..7c2ed1c 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -513,6 +513,22 @@ static void ath9k_init_misc(struct ath_softc *sc)
sc->spec_config.fft_period = 0xF;
}
+static void ath9k_init_platform(struct ath_softc *sc)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ if (common->bus_ops->ath_bus_type != ATH_PCI)
+ return;
+
+ if (sc->driver_data & ATH9K_PCI_CUS198) {
+ ah->config.xlna_gpio = 9;
+ ah->config.xatten_margin_cfg = true;
+
+ ath_info(common, "Set parameters for CUS198\n");
+ }
+}
+
static void ath9k_eeprom_request_cb(const struct firmware *eeprom_blob,
void *ctx)
{
@@ -605,6 +621,11 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
common->disable_ani = false;
/*
+ * Platform quirks.
+ */
+ ath9k_init_platform(sc);
+
+ /*
* Enable Antenna diversity only when BTCOEX is disabled
* and the user manually requests the feature.
*/
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 0e0d395..4ac00b4 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -34,6 +34,34 @@ static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = {
{ PCI_VDEVICE(ATHEROS, 0x002D) }, /* PCI */
{ PCI_VDEVICE(ATHEROS, 0x002E) }, /* PCI-E */
{ PCI_VDEVICE(ATHEROS, 0x0030) }, /* PCI-E AR9300 */
+
+ /* PCI-E CUS198 */
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
+ 0x0032,
+ PCI_VENDOR_ID_AZWAVE,
+ 0x2086),
+ .driver_data = ATH9K_PCI_CUS198 },
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
+ 0x0032,
+ PCI_VENDOR_ID_AZWAVE,
+ 0x1237),
+ .driver_data = ATH9K_PCI_CUS198 },
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
+ 0x0032,
+ PCI_VENDOR_ID_AZWAVE,
+ 0x2126),
+ .driver_data = ATH9K_PCI_CUS198 },
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
+ 0x0032,
+ PCI_VENDOR_ID_AZWAVE,
+ 0x2152),
+ .driver_data = ATH9K_PCI_CUS198 },
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
+ 0x0032,
+ PCI_VENDOR_ID_FOXCONN,
+ 0xE075),
+ .driver_data = ATH9K_PCI_CUS198 },
+
{ PCI_VDEVICE(ATHEROS, 0x0032) }, /* PCI-E AR9485 */
{ PCI_VDEVICE(ATHEROS, 0x0033) }, /* PCI-E AR9580 */
{ PCI_VDEVICE(ATHEROS, 0x0034) }, /* PCI-E AR9462 */
@@ -221,6 +249,7 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
sc->hw = hw;
sc->dev = &pdev->dev;
sc->mem = pcim_iomap_table(pdev)[0];
+ sc->driver_data = id->driver_data;
/* Will be cleared in ath9k_start() */
set_bit(SC_OP_INVALID, &sc->sc_flags);
--
1.8.3.1