Hi John,
here's a new pull request for ath6kl and ath10k.
For ath10k Alexander did some cleanup to PCI error cases and switched
ath10k to use pci_enable_msi_range(). Michal implemented AP CSA support
and sta_rc_update() operation. I enabled firmware "STA quick kickout"
functionality for faster detection of disappeared clients.
Also there are lots of small fixes to everywhere from various people.
For ath6kl Julien did two small USB related fixes.
Please let me know if there are any problmes
The following changes since commit 38dbfb59d1175ef458d006556061adeaa8751b72:
Linus 3.14-rc1 (2014-02-02 16:42:13 -0800)
are available in the git repository at:
git://github.com/kvalo/ath.git for-linville
for you to fetch changes up to 9797febc4cc112869b19a110f70e0dedb1bb63d6:
ath10k: implement sta_rc_update() (2014-02-15 08:49:02 +0200)
----------------------------------------------------------------
Alexander Gordeev (3):
ath10k: Get rid of superfluous call to pci_disable_msi()
ath10k: Disable MSI in case IRQ configuration is unknown
ath10k: Use pci_enable_msi_range()
Bartosz Markowski (2):
ath10k: remove excessive rx msdu len check
ath10k: AP: handle HT station which does not have HT RX MCS
Ben Greear (4):
ath10k: Print out firmware feature bits from IE.
ath10k: print out size of wmi-ready-event message
ath10k: add more debugging for receive errors
ath10k: better tx/rx debugging
Chun-Yeow Yeoh (1):
ath10k: fix the printing of 10.x FW version when FW crashed
Janusz Dziedzic (3):
ath10k: enable wmi ps peer param command for 10.x FW
ath10k: AP mode, set UAPSD params correctly
ath10k: pass frames with invalid peer status to upper layer
Julien Massot (2):
ath6kl: increase usb rx buffer size to 4096
ath6kl: set rx urb count threshold to 1
Kalle Valo (5):
ath10k: enable firmware STA quick kickout
Merge remote-tracking branch 'wireless-next/master' into ath-next
ath10k: fix alignment in ath10k_dbg()
ath: remove camel case from struct reg_dmn_pair_mapping
ath10k: release conf_mutex if vdev_start() fails
Marek Kwaczynski (1):
ath10k: Set proper nss value for the peer
Marek Puzyniak (3):
ath10k: configure access category for arp
ath10k: refactor suspend/resume functions
ath10k: suspend hardware before reset
Michal Kazior (7):
ath10k: implement channel switching
ath10k: implement AP CSA
ath10k: implement and use new beacon method
ath10k: properly return err from start()
ath10k: fix device initialization routine
ath10k: fix SMPS support
ath10k: implement sta_rc_update()
drivers/net/wireless/ath/ath.h | 2 +-
drivers/net/wireless/ath/ath10k/core.c | 36 +-
drivers/net/wireless/ath/ath10k/core.h | 47 ++-
drivers/net/wireless/ath/ath10k/debug.h | 2 +-
drivers/net/wireless/ath/ath10k/htt_rx.c | 35 +-
drivers/net/wireless/ath/ath10k/htt_tx.c | 4 +-
drivers/net/wireless/ath/ath10k/hw.h | 6 +
drivers/net/wireless/ath/ath10k/mac.c | 634 +++++++++++++++++++++++++-----
drivers/net/wireless/ath/ath10k/pci.c | 147 ++++++-
drivers/net/wireless/ath/ath10k/txrx.c | 4 +-
drivers/net/wireless/ath/ath10k/wmi.c | 118 ++++--
drivers/net/wireless/ath/ath10k/wmi.h | 34 +-
drivers/net/wireless/ath/ath6kl/usb.c | 6 +-
drivers/net/wireless/ath/ath6kl/wmi.c | 4 +-
drivers/net/wireless/ath/regd.c | 10 +-
15 files changed, 895 insertions(+), 194 deletions(-)
--
Kalle Valo
On Mon, Feb 17, 2014 at 06:05:01PM +0200, Kalle Valo wrote:
> Hi John,
>
> here's a new pull request for ath6kl and ath10k.
>
> For ath10k Alexander did some cleanup to PCI error cases and switched
> ath10k to use pci_enable_msi_range(). Michal implemented AP CSA support
> and sta_rc_update() operation. I enabled firmware "STA quick kickout"
> functionality for faster detection of disappeared clients.
>
> Also there are lots of small fixes to everywhere from various people.
>
> For ath6kl Julien did two small USB related fixes.
>
> Please let me know if there are any problmes
>
> The following changes since commit 38dbfb59d1175ef458d006556061adeaa8751b72:
>
> Linus 3.14-rc1 (2014-02-02 16:42:13 -0800)
>
> are available in the git repository at:
>
> git://github.com/kvalo/ath.git for-linville
>
> for you to fetch changes up to 9797febc4cc112869b19a110f70e0dedb1bb63d6:
>
> ath10k: implement sta_rc_update() (2014-02-15 08:49:02 +0200)
Pulling now...
--
John W. Linville Someday the world will need a hero, and you
[email protected] might be all we have. Be ready.