2021-03-12 00:35:34

by Bjorn Andersson

Subject: [PATCH 1/5] dt-bindings: soc: qcom: wcnss: Add firmware-name property

The WCNSS needs firmware which differs between platforms, and possibly
boards. Add a new property "firmware-name" to allow the DT to specify
the platform/board specific path to this firmware file.

Signed-off-by: Bjorn Andersson <[email protected]>
---
Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
index 042a2e4159bd..1382b64e1381 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
@@ -24,6 +24,13 @@ block and a BT, WiFi and FM radio block, all using SMD as command channels.
"qcom,riva",
"qcom,pronto"

+- firmware-name:
+ Usage: optional
+ Value type: <string>
+ Definition: specifies the relative firmware image path for the WLAN NV
+ blob. Defaults to "wlan/prima/WCNSS_qcom_wlan_nv.bin" if
+ not specified.
+
= SUBNODES
The subnodes of the wcnss node are optional and describe the individual blocks in
the WCNSS.
--
2.29.2

2021-03-24 15:24:13

by Rob Herring

Subject: Re: [PATCH 1/5] dt-bindings: soc: qcom: wcnss: Add firmware-name property

On Thu, 11 Mar 2021 16:33:14 -0800, Bjorn Andersson wrote:
> The WCNSS needs firmware which differs between platforms, and possibly
> boards. Add a new property "firmware-name" to allow the DT to specify
> the platform/board specific path to this firmware file.
>
> Signed-off-by: Bjorn Andersson <[email protected]>
> ---
> Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt | 7 +++++++
> 1 file changed, 7 insertions(+)
>

Acked-by: Rob Herring <[email protected]>