On 2021-06-08 20:34, Maharaja Kennadyrajan wrote:
> Add support to configure the beacon tx mode as STAGGERED
> or BURST mode via hostapd configuration during the AP
> bring-up or via wpa_suppplicant configuration during MESH
> bring-up.
>
> Beacons can be sent out in burst(continuously in a single shot
> one after another) or staggered (equally spread out over beacon
> interval) mode.
>
> V3: Addressed Johnson's comment on v2 patch.
>
> V2: Addressed Johannes's comment on v1 patch.
>
> Maharaja Kennadyrajan (3):
> nl80211: Add support for beacon tx mode
> mac80211: Add support for beacon tx mode
> ath11k: Add support for beacon tx mode
>
> drivers/net/wireless/ath/ath11k/mac.c | 10 +++++++---
> include/net/cfg80211.h | 4 ++++
> include/net/mac80211.h | 2 ++
> include/uapi/linux/nl80211.h | 16 ++++++++++++++++
> net/mac80211/cfg.c | 2 ++
> net/wireless/nl80211.c | 9 +++++++++
> 6 files changed, 40 insertions(+), 3 deletions(-)
[Maha]: Please drop this revision patchset.
I will send the next revision. Sorry for the inconvenience.