Defines pipes & channel configurations like channel type,
pipe mappings, No. of transfer descriptors and transfer
buffer size etc.
Signed-off-by: M Chetan Kumar <[email protected]>
---
v4: no change.
v3: WWAN port adaptation.
v2:
* Return proper error code instead of returning -1.
* Define IPC channels in serial order.
---
drivers/net/wwan/iosm/iosm_ipc_chnl_cfg.c | 88 +++++++++++++++++++++++
drivers/net/wwan/iosm/iosm_ipc_chnl_cfg.h | 59 +++++++++++++++
2 files changed, 147 insertions(+)
create mode 100644 drivers/net/wwan/iosm/iosm_ipc_chnl_cfg.c
create mode 100644 drivers/net/wwan/iosm/iosm_ipc_chnl_cfg.h
diff --git a/drivers/net/wwan/iosm/iosm_ipc_chnl_cfg.c b/drivers/net/wwan/iosm/iosm_ipc_chnl_cfg.c
new file mode 100644
index 000000000000..d408d8967300
--- /dev/null
+++ b/drivers/net/wwan/iosm/iosm_ipc_chnl_cfg.c
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020-21 Intel Corporation.
+ */
+
+#include <linux/wwan.h>
+
+#include "iosm_ipc_chnl_cfg.h"
+
+/* Max. sizes of a downlink buffers */
+#define IPC_MEM_MAX_DL_FLASH_BUF_SIZE (16 * 1024)
+#define IPC_MEM_MAX_DL_LOOPBACK_SIZE (1 * 1024 * 1024)
+#define IPC_MEM_MAX_DL_AT_BUF_SIZE 2048
+#define IPC_MEM_MAX_DL_RPC_BUF_SIZE (32 * 1024)
+#define IPC_MEM_MAX_DL_MBIM_BUF_SIZE IPC_MEM_MAX_DL_RPC_BUF_SIZE
+
+/* Max. transfer descriptors for a pipe. */
+#define IPC_MEM_MAX_TDS_FLASH_DL 3
+#define IPC_MEM_MAX_TDS_FLASH_UL 6
+#define IPC_MEM_MAX_TDS_AT 4
+#define IPC_MEM_MAX_TDS_RPC 4
+#define IPC_MEM_MAX_TDS_MBIM IPC_MEM_MAX_TDS_RPC
+#define IPC_MEM_MAX_TDS_LOOPBACK 11
+
+/* Accumulation backoff usec */
+#define IRQ_ACC_BACKOFF_OFF 0
+
+/* MUX acc backoff 1ms */
+#define IRQ_ACC_BACKOFF_MUX 1000
+
+/* Modem channel configuration table
+ * Always reserve element zero for flash channel.
+ */
+static struct ipc_chnl_cfg modem_cfg[] = {
+ /* IP Mux */
+ { IPC_MEM_IP_CHL_ID_0, IPC_MEM_PIPE_0, IPC_MEM_PIPE_1,
+ IPC_MEM_MAX_TDS_MUX_LITE_UL, IPC_MEM_MAX_TDS_MUX_LITE_DL,
+ IPC_MEM_MAX_DL_MUX_LITE_BUF_SIZE, WWAN_PORT_MAX },
+ /* RPC - 0 */
+ { IPC_MEM_CTRL_CHL_ID_1, IPC_MEM_PIPE_2, IPC_MEM_PIPE_3,
+ IPC_MEM_MAX_TDS_RPC, IPC_MEM_MAX_TDS_RPC,
+ IPC_MEM_MAX_DL_RPC_BUF_SIZE, WWAN_PORT_MAX },
+ /* IAT0 */
+ { IPC_MEM_CTRL_CHL_ID_2, IPC_MEM_PIPE_4, IPC_MEM_PIPE_5,
+ IPC_MEM_MAX_TDS_AT, IPC_MEM_MAX_TDS_AT, IPC_MEM_MAX_DL_AT_BUF_SIZE,
+ WWAN_PORT_AT },
+ /* Trace */
+ { IPC_MEM_CTRL_CHL_ID_3, IPC_MEM_PIPE_6, IPC_MEM_PIPE_7,
+ IPC_MEM_TDS_TRC, IPC_MEM_TDS_TRC, IPC_MEM_MAX_DL_TRC_BUF_SIZE,
+ WWAN_PORT_MAX },
+ /* IAT1 */
+ { IPC_MEM_CTRL_CHL_ID_4, IPC_MEM_PIPE_8, IPC_MEM_PIPE_9,
+ IPC_MEM_MAX_TDS_AT, IPC_MEM_MAX_TDS_AT, IPC_MEM_MAX_DL_AT_BUF_SIZE,
+ WWAN_PORT_AT },
+ /* Loopback */
+ { IPC_MEM_CTRL_CHL_ID_5, IPC_MEM_PIPE_10, IPC_MEM_PIPE_11,
+ IPC_MEM_MAX_TDS_LOOPBACK, IPC_MEM_MAX_TDS_LOOPBACK,
+ IPC_MEM_MAX_DL_LOOPBACK_SIZE, WWAN_PORT_MAX },
+ /* MBIM Channel */
+ { IPC_MEM_CTRL_CHL_ID_6, IPC_MEM_PIPE_12, IPC_MEM_PIPE_13,
+ IPC_MEM_MAX_TDS_MBIM, IPC_MEM_MAX_TDS_MBIM,
+ IPC_MEM_MAX_DL_MBIM_BUF_SIZE, WWAN_PORT_MBIM },
+};
+
+int ipc_chnl_cfg_get(struct ipc_chnl_cfg *chnl_cfg, int index)
+{
+ int array_size = ARRAY_SIZE(modem_cfg);
+
+ if (index >= array_size) {
+ pr_err("index: %d and array_size %d", index, array_size);
+ return -ECHRNG;
+ }
+
+ if (index == IPC_MEM_MUX_IP_CH_IF_ID)
+ chnl_cfg->accumulation_backoff = IRQ_ACC_BACKOFF_MUX;
+ else
+ chnl_cfg->accumulation_backoff = IRQ_ACC_BACKOFF_OFF;
+
+ chnl_cfg->ul_nr_of_entries = modem_cfg[index].ul_nr_of_entries;
+ chnl_cfg->dl_nr_of_entries = modem_cfg[index].dl_nr_of_entries;
+ chnl_cfg->dl_buf_size = modem_cfg[index].dl_buf_size;
+ chnl_cfg->id = modem_cfg[index].id;
+ chnl_cfg->ul_pipe = modem_cfg[index].ul_pipe;
+ chnl_cfg->dl_pipe = modem_cfg[index].dl_pipe;
+ chnl_cfg->wwan_port_type = modem_cfg[index].wwan_port_type;
+
+ return 0;
+}
diff --git a/drivers/net/wwan/iosm/iosm_ipc_chnl_cfg.h b/drivers/net/wwan/iosm/iosm_ipc_chnl_cfg.h
new file mode 100644
index 000000000000..422471367f78
--- /dev/null
+++ b/drivers/net/wwan/iosm/iosm_ipc_chnl_cfg.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0-only
+ *
+ * Copyright (C) 2020-21 Intel Corporation
+ */
+
+#ifndef IOSM_IPC_CHNL_CFG_H
+#define IOSM_IPC_CHNL_CFG_H
+
+#include "iosm_ipc_mux.h"
+
+/* Number of TDs on the trace channel */
+#define IPC_MEM_TDS_TRC 32
+
+/* Trace channel TD buffer size. */
+#define IPC_MEM_MAX_DL_TRC_BUF_SIZE 8192
+
+/* Channel ID */
+enum ipc_channel_id {
+ IPC_MEM_IP_CHL_ID_0 = 0,
+ IPC_MEM_CTRL_CHL_ID_1,
+ IPC_MEM_CTRL_CHL_ID_2,
+ IPC_MEM_CTRL_CHL_ID_3,
+ IPC_MEM_CTRL_CHL_ID_4,
+ IPC_MEM_CTRL_CHL_ID_5,
+ IPC_MEM_CTRL_CHL_ID_6,
+};
+
+/**
+ * struct ipc_chnl_cfg - IPC channel configuration structure
+ * @id: Interface ID
+ * @ul_pipe: Uplink datastream
+ * @dl_pipe: Downlink datastream
+ * @ul_nr_of_entries: Number of Transfer descriptor uplink pipe
+ * @dl_nr_of_entries: Number of Transfer descriptor downlink pipe
+ * @dl_buf_size: Downlink buffer size
+ * @wwan_port_type: Wwan subsystem port type
+ * @accumulation_backoff: Time in usec for data accumalation
+ */
+struct ipc_chnl_cfg {
+ u32 id;
+ u32 ul_pipe;
+ u32 dl_pipe;
+ u32 ul_nr_of_entries;
+ u32 dl_nr_of_entries;
+ u32 dl_buf_size;
+ u32 wwan_port_type;
+ u32 accumulation_backoff;
+};
+
+/**
+ * ipc_chnl_cfg_get - Get pipe configuration.
+ * @chnl_cfg: Array of ipc_chnl_cfg struct
+ * @index: Channel index (upto MAX_CHANNELS)
+ *
+ * Return: 0 on success and failure value on error
+ */
+int ipc_chnl_cfg_get(struct ipc_chnl_cfg *chnl_cfg, int index);
+
+#endif
--
2.25.1
Hello Chetan,
On Tue, Jun 8, 2021 at 8:07 PM M Chetan Kumar <[email protected]> wrote:
[skipped]
> +/* Modem channel configuration table
> + * Always reserve element zero for flash channel.
> + */
> +static struct ipc_chnl_cfg modem_cfg[] = {
> + /* IP Mux */
> + { IPC_MEM_IP_CHL_ID_0, IPC_MEM_PIPE_0, IPC_MEM_PIPE_1,
> + IPC_MEM_MAX_TDS_MUX_LITE_UL, IPC_MEM_MAX_TDS_MUX_LITE_DL,
> + IPC_MEM_MAX_DL_MUX_LITE_BUF_SIZE, WWAN_PORT_MAX },
Since commit b64d76b78226 ("net: wwan: make WWAN_PORT_MAX meaning less
surprised") WWAN_PORT_MAX really means a maximum valid port type id.
At the moment the max value is WWAN_PORT_FIREHOSE. If I understand the
driver code correctly, you ignore WWAN_PORT_MAX ports in the
ipc_imem_run_state_worker() function. So using WWAN_PORT_MAX in this
way should not actually break anything.
Just as a FYI, Loic introduced a special value WWAN_PORT_UNKNOWN that
could be used to indicate a port that should not be registered with
the WWAN core. Looks like WWAN_PORT_UNKNOWN would be a safer
alternative here.
--
Sergey