iwlmei allows to integrate with the CSME firmware. There are
flows that are prioprietary for this purpose:
* Get the information the AP, the CSME firmware is connected
to. This is useful when we need to speed up the connection
process in case the CSME firmware has an TCP connection
that must be kept alive across the ownership transition.
* Forbid roaming, which will happen when the CSME firmware
wants to tell the user space not disrupt the connection.
* Request ownership, upon driver boot when the CSME firmware
owns the device.
Co-Developed-by: Ayala Beker <[email protected]>
Signed-off-by: Emmanuel Grumbach <[email protected]>
---
include/uapi/linux/nl80211-vnd-intel.h | 80 ++++++++++++++++++++++++++
1 file changed, 80 insertions(+)
create mode 100644 include/uapi/linux/nl80211-vnd-intel.h
diff --git a/include/uapi/linux/nl80211-vnd-intel.h b/include/uapi/linux/nl80211-vnd-intel.h
new file mode 100644
index 000000000000..d41c34b84f25
--- /dev/null
+++ b/include/uapi/linux/nl80211-vnd-intel.h
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2012-2014, 2018-2021 Intel Corporation
+ * Copyright (C) 2013-2015 Intel Mobile Communications GmbH
+ * Copyright (C) 2016-2017 Intel Deutschland GmbH
+ */
+#ifndef __VENDOR_CMD_INTEL_H__
+#define __VENDOR_CMD_INTEL_H__
+
+#define INTEL_OUI 0x001735
+
+/**
+ * enum iwl_mvm_vendor_cmd - supported vendor commands
+ * @IWL_MVM_VENDOR_CMD_GET_CSME_CONN_INFO: reports CSME connection info.
+ * @IWL_MVM_VENDOR_CMD_HOST_GET_OWNERSHIP: asks for ownership on the device.
+ * @IWL_MVM_VENDOR_CMD_ROAMING_FORBIDDEN_EVENT: notifies if roaming is allowed.
+ * It contains a &IWL_MVM_VENDOR_ATTR_ROAMING_FORBIDDEN and a
+ * &IWL_MVM_VENDOR_ATTR_VIF_ADDR attributes.
+ */
+
+enum iwl_mvm_vendor_cmd {
+ IWL_MVM_VENDOR_CMD_GET_CSME_CONN_INFO = 0x2d,
+ IWL_MVM_VENDOR_CMD_HOST_GET_OWNERSHIP = 0x30,
+ IWL_MVM_VENDOR_CMD_ROAMING_FORBIDDEN_EVENT = 0x32,
+};
+
+enum iwl_vendor_auth_akm_mode {
+ IWL_VENDOR_AUTH_OPEN,
+ IWL_VENDOR_AUTH_SHARED,
+ IWL_VENDOR_AUTH_WPA = 0x3,
+ IWL_VENDOR_AUTH_WPA_PSK,
+ IWL_VENDOR_AUTH_RSNA = 0x6,
+ IWL_VENDOR_AUTH_RSNA_PSK,
+ IWL_VENDOR_AUTH_SAE = 0x9,
+ IWL_VENDOR_AUTH_MAX,
+};
+
+/**
+ * enum iwl_mvm_vendor_attr - attributes used in vendor commands
+ * @__IWL_MVM_VENDOR_ATTR_INVALID: attribute 0 is invalid
+ * @IWL_MVM_VENDOR_ATTR_VIF_ADDR: interface MAC address
+ * @IWL_MVM_VENDOR_ATTR_ADDR: MAC address
+ * @IWL_MVM_VENDOR_ATTR_SSID: SSID (binary attribute, 0..32 octets)
+ * @IWL_MVM_VENDOR_ATTR_STA_CIPHER: the cipher to use for the station with the
+ * mac address specified in &IWL_MVM_VENDOR_ATTR_ADDR.
+ * @IWL_MVM_VENDOR_ATTR_ROAMING_FORBIDDEN: u8 attribute. Indicates whether
+ * roaming is forbidden or not. Value 1 means roaming is forbidden,
+ * 0 mean roaming is allowed.
+ * @IWL_MVM_VENDOR_ATTR_AUTH_MODE: u32 attribute. Authentication mode type
+ * as specified in &enum iwl_vendor_auth_akm_mode.
+ * @IWL_MVM_VENDOR_ATTR_CHANNEL_NUM: u8 attribute. Contains channel number.
+ * @IWL_MVM_VENDOR_ATTR_BAND: u8 attribute.
+ * 0 for 2.4 GHz band, 1 for 5.2GHz band and 2 for 6GHz band.
+ * @IWL_MVM_VENDOR_ATTR_COLLOC_CHANNEL: u32 attribute. Channel number of
+ * collocated AP. Relevant for 6GHz AP info.
+ * @IWL_MVM_VENDOR_ATTR_COLLOC_ADDR: MAC address of a collocated AP.
+ * Relevant for 6GHz AP info.
+ *
+ * @NUM_IWL_MVM_VENDOR_ATTR: number of vendor attributes
+ * @MAX_IWL_MVM_VENDOR_ATTR: highest vendor attribute number
+
+ */
+enum iwl_mvm_vendor_attr {
+ __IWL_MVM_VENDOR_ATTR_INVALID = 0x00,
+ IWL_MVM_VENDOR_ATTR_VIF_ADDR = 0x02,
+ IWL_MVM_VENDOR_ATTR_ADDR = 0x0a,
+ IWL_MVM_VENDOR_ATTR_SSID = 0x3d,
+ IWL_MVM_VENDOR_ATTR_STA_CIPHER = 0x51,
+ IWL_MVM_VENDOR_ATTR_ROAMING_FORBIDDEN = 0x64,
+ IWL_MVM_VENDOR_ATTR_AUTH_MODE = 0x65,
+ IWL_MVM_VENDOR_ATTR_CHANNEL_NUM = 0x66,
+ IWL_MVM_VENDOR_ATTR_BAND = 0x69,
+ IWL_MVM_VENDOR_ATTR_COLLOC_CHANNEL = 0x70,
+ IWL_MVM_VENDOR_ATTR_COLLOC_ADDR = 0x71,
+
+ NUM_IWL_MVM_VENDOR_ATTR,
+ MAX_IWL_MVM_VENDOR_ATTR = NUM_IWL_MVM_VENDOR_ATTR - 1,
+};
+
+#endif /* __VENDOR_CMD_INTEL_H__ */
--
2.25.1