--- 2.4/drivers/net/winbond-840.c Sun Dec 17 18:03:56 2000
+++ build-2.4/drivers/net/winbond-840.c Tue Dec 26 17:17:21 2000
@@ -21,11 +21,25 @@
Do not change the version information unless an improvement has been made.
Merely removing my name, as Compex has done in the past, does not count
as an improvement.
+
+ Changelog:
+ * ported to 2.4
+ ???
+ * spin lock update, memory barriers, new style dma mappings
+ limit each tx buffer to < 1024 bytes
+ remove bogus DescIntr from Rx descriptors
+ remove bogus next pointer from Tx descriptors
+ software reset in tx_timeout
+ Manfred Spraul
+
+ TODO:
+ * according to the documentation, the chip supports big endian
+ internally. Replace the cpu_to_le32 with that bit.
*/
/* These identify the driver base version and may not be removed. */
static const char version1[] =
-"winbond-840.c:v1.01 5/15/2000 Donald Becker <[email protected]>\n";
+"winbond-840.c:v1.01 (2.4 port) 5/15/2000 Donald Becker <[email protected]>\n";
static const char version2[] =
" http://www.scyld.com/network/drivers.html\n";
@@ -81,6 +95,8 @@
#define TX_FIFO_SIZE (2048)
#define TX_BUG_FIFO_LIMIT (TX_FIFO_SIZE-1514-16)
+#define TX_BUFLIMIT (1024-128)
+
/* Operational parameters that usually are not changed. */
/* Time in jiffies before concluding the transmitter is hung. */
#define TX_TIMEOUT (2*HZ)
@@ -113,12 +129,7 @@
#include <asm/processor.h> /* Processor type for cache alignment. */
#include <asm/bitops.h>
#include <asm/io.h>
-
-/* Condensed operations for readability.
- The compatibility defines are in kern_compat.h */
-
-#define virt_to_le32desc(addr) cpu_to_le32(virt_to_bus(addr))
-#define le32desc_to_virt(addr) bus_to_virt(le32_to_cpu(addr))
+#include <asm/delay.h>
MODULE_AUTHOR("Donald Becker <[email protected]>");
MODULE_DESCRIPTION("Winbond W89c840 Ethernet driver");
@@ -280,7 +291,7 @@
s32 status;
s32 length;
u32 buffer1;
- u32 next_desc;
+ u32 buffer2;
};
struct w840_tx_desc {
@@ -293,14 +304,21 @@
enum desc_status_bits {
DescOwn=0x80000000, DescEndRing=0x02000000, DescUseLink=0x01000000,
DescWholePkt=0x60000000, DescStartPkt=0x20000000, DescEndPkt=0x40000000,
+};
+
+/* Bits in w840_tx_desc.length */
+enum desc_length_bits {
DescIntr=0x80000000,
};
#define PRIV_ALIGN 15 /* Required alignment mask */
struct netdev_private {
- /* Descriptor rings first for alignment. */
- struct w840_rx_desc rx_ring[RX_RING_SIZE];
- struct w840_tx_desc tx_ring[TX_RING_SIZE];
+ struct w840_rx_desc *rx_ring;
+ dma_addr_t rx_addr[RX_RING_SIZE];
+ struct w840_tx_desc *tx_ring;
+ dma_addr_t tx_addr[RX_RING_SIZE];
+ dma_addr_t ring_dma_addr;
+ struct pci_dev *pdev;
/* The addresses of receive-in-place skbuffs. */
struct sk_buff* rx_skbuff[RX_RING_SIZE];
/* The saved address of a sent-in-place packet/buffer, for later free(). */
@@ -334,13 +352,15 @@
static int netdev_open(struct net_device *dev);
static void check_duplex(struct net_device *dev);
static void netdev_timer(unsigned long data);
+static void init_rxtx_rings(struct net_device *dev);
+static void free_rxtx_rings(struct netdev_private *np);
+static void init_registers(struct net_device *dev);
static void tx_timeout(struct net_device *dev);
-static void init_ring(struct net_device *dev);
+static int alloc_ring(struct net_device *dev);
static int start_tx(struct sk_buff *skb, struct net_device *dev);
static void intr_handler(int irq, void *dev_instance, struct pt_regs *regs);
static void netdev_error(struct net_device *dev, int intr_status);
static int netdev_rx(struct net_device *dev);
-static void netdev_error(struct net_device *dev, int intr_status);
static inline unsigned ether_crc(int length, unsigned char *data);
static void set_rx_mode(struct net_device *dev);
static struct net_device_stats *get_stats(struct net_device *dev);
@@ -364,6 +384,11 @@
return -EIO;
pci_set_master(pdev);
+ if(!pci_dma_supported(pdev,0xFFFFffff)) {
+ printk(KERN_WARNING "Winbond-840: Device %s disabled due to DMA limitations.\n",
+ pdev->name);
+ return -EIO;
+ }
dev = init_etherdev(NULL, sizeof(*np));
if (!dev)
return -ENOMEM;
@@ -403,6 +428,7 @@
np = dev->priv;
np->chip_id = chip_idx;
np->drv_flags = pci_id_tbl[chip_idx].drv_flags;
+ np->pdev = pdev;
spin_lock_init(&np->lock);
pdev->driver_data = dev;
@@ -632,60 +658,12 @@
printk(KERN_DEBUG "%s: w89c840_open() irq %d.\n",
dev->name, dev->irq);
- init_ring(dev);
-
- writel(virt_to_bus(np->rx_ring), ioaddr + RxRingPtr);
- writel(virt_to_bus(np->tx_ring), ioaddr + TxRingPtr);
-
- for (i = 0; i < 6; i++)
- writeb(dev->dev_addr[i], ioaddr + StationAddr + i);
-
- /* Initialize other registers. */
- /* Configure the PCI bus bursts and FIFO thresholds.
- 486: Set 8 longword cache alignment, 8 longword burst.
- 586: Set 16 longword cache alignment, no burst limit.
- Cache alignment bits 15:14 Burst length 13:8
- 0000 <not allowed> 0000 align to cache 0800 8 longwords
- 4000 8 longwords 0100 1 longword 1000 16 longwords
- 8000 16 longwords 0200 2 longwords 2000 32 longwords
- C000 32 longwords 0400 4 longwords
- Wait the specified 50 PCI cycles after a reset by initializing
- Tx and Rx queues and the address filter list. */
-#if defined(__powerpc__) /* Big-endian */
- writel(0x00100080 | 0xE010, ioaddr + PCIBusCfg);
-#elif defined(__alpha__)
- writel(0xE010, ioaddr + PCIBusCfg);
-#elif defined(__i386__)
-#if defined(MODULE)
- writel(0xE010, ioaddr + PCIBusCfg);
-#else
- /* When not a module we can work around broken '486 PCI boards. */
-#define x86 boot_cpu_data.x86
- writel((x86 <= 4 ? 0x4810 : 0xE010), ioaddr + PCIBusCfg);
- if (x86 <= 4)
- printk(KERN_INFO "%s: This is a 386/486 PCI system, setting cache "
- "alignment to %x.\n", dev->name,
- (x86 <= 4 ? 0x4810 : 0x8010));
-#endif
-#else
- writel(0xE010, ioaddr + PCIBusCfg);
-#warning Processor architecture undefined!
-#endif
-
- if (dev->if_port == 0)
- dev->if_port = np->default_port;
+ if((i=alloc_ring(dev)))
+ return i;
- writel(0, ioaddr + RxStartDemand);
- np->csr6 = 0x20022002;
- check_duplex(dev);
- set_rx_mode(dev);
+ init_registers(dev);
netif_start_queue(dev);
-
- /* Clear and Enable interrupts by setting the interrupt mask. */
- writel(0x1A0F5, ioaddr + IntrStatus);
- writel(0x1A0F5, ioaddr + IntrEnable);
-
if (debug > 2)
printk(KERN_DEBUG "%s: Done netdev_open().\n", dev->name);
@@ -733,15 +711,149 @@
"config %8.8x.\n",
dev->name, (int)readl(ioaddr + IntrStatus),
(int)readl(ioaddr + NetworkConfig));
+ spin_lock_irq(&np->lock);
check_duplex(dev);
if (np->csr6 != old_csr6) {
writel(np->csr6 & ~0x0002, ioaddr + NetworkConfig);
writel(np->csr6 | 0x2002, ioaddr + NetworkConfig);
}
+ spin_unlock_irq(&np->lock);
np->timer.expires = jiffies + next_tick;
add_timer(&np->timer);
}
+static void init_rxtx_rings(struct net_device *dev)
+{
+ struct netdev_private *np = (struct netdev_private *)dev->priv;
+ int i;
+
+ np->rx_head_desc = &np->rx_ring[0];
+ np->tx_ring = (struct w840_tx_desc*)&np->rx_ring[RX_RING_SIZE];
+
+ /* Initial all Rx descriptors. */
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ np->rx_ring[i].length = cpu_to_le32(np->rx_buf_sz);
+ np->rx_ring[i].status = 0;
+ np->rx_skbuff[i] = 0;
+ }
+ /* Mark the last entry as wrapping the ring. */
+ np->rx_ring[i-1].length |= cpu_to_le32(DescEndRing);
+
+ /* Fill in the Rx buffers. Handle allocation failure gracefully. */
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz);
+ np->rx_skbuff[i] = skb;
+ if (skb == NULL)
+ break;
+ skb->dev = dev; /* Mark as being used by this device. */
+ np->rx_addr[i] = pci_map_single(np->pdev,skb->tail,
+ skb->len,PCI_DMA_FROMDEVICE);
+
+ np->rx_ring[i].buffer1 = cpu_to_le32(np->rx_addr[i]);
+ np->rx_ring[i].status = cpu_to_le32(DescOwn);
+ }
+
+ np->cur_rx = 0;
+ np->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
+
+ /* Initialize the Tx descriptors */
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ np->tx_skbuff[i] = 0;
+ np->tx_ring[i].status = 0;
+ }
+ np->tx_full = 0;
+ np->tx_q_bytes = np->dirty_tx = np->cur_tx = 0;
+
+ writel(np->ring_dma_addr, dev->base_addr + RxRingPtr);
+ writel(np->ring_dma_addr+sizeof(struct w840_rx_desc)*RX_RING_SIZE,
+ dev->base_addr + TxRingPtr);
+
+}
+
+static void free_rxtx_rings(struct netdev_private* np)
+{
+ int i;
+ /* Free all the skbuffs in the Rx queue. */
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ np->rx_ring[i].status = 0;
+ if (np->rx_skbuff[i]) {
+ pci_unmap_single(np->pdev,
+ np->rx_addr[i],
+ np->rx_skbuff[i]->len,
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(np->rx_skbuff[i]);
+ }
+ np->rx_skbuff[i] = 0;
+ }
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ if (np->tx_skbuff[i]) {
+ pci_unmap_single(np->pdev,
+ np->tx_addr[i],
+ np->tx_skbuff[i]->len,
+ PCI_DMA_TODEVICE);
+ dev_kfree_skb(np->tx_skbuff[i]);
+ }
+ np->tx_skbuff[i] = 0;
+ }
+}
+
+static void init_registers(struct net_device *dev)
+{
+ struct netdev_private *np = (struct netdev_private *)dev->priv;
+ long ioaddr = dev->base_addr;
+ int i;
+
+ for (i = 0; i < 6; i++)
+ writeb(dev->dev_addr[i], ioaddr + StationAddr + i);
+
+ /* Initialize other registers. */
+ /* Configure the PCI bus bursts and FIFO thresholds.
+ 486: Set 8 longword cache alignment, 8 longword burst.
+ 586: Set 16 longword cache alignment, no burst limit.
+ Cache alignment bits 15:14 Burst length 13:8
+ 0000 <not allowed> 0000 align to cache 0800 8 longwords
+ 4000 8 longwords 0100 1 longword 1000 16 longwords
+ 8000 16 longwords 0200 2 longwords 2000 32 longwords
+ C000 32 longwords 0400 4 longwords
+ Wait the specified 50 PCI cycles after a reset by initializing
+ Tx and Rx queues and the address filter list. */
+#if defined(__powerpc__) /* Big-endian */
+ writel(0x00100080 | 0xE010, ioaddr + PCIBusCfg);
+#elif defined(__alpha__)
+ writel(0xE010, ioaddr + PCIBusCfg);
+#elif defined(__i386__)
+#if defined(MODULE)
+ writel(0xE010, ioaddr + PCIBusCfg);
+#else
+ /* When not a module we can work around broken '486 PCI boards. */
+#define x86 boot_cpu_data.x86
+ writel((x86 <= 4 ? 0x4810 : 0xE010), ioaddr + PCIBusCfg);
+ if (x86 <= 4)
+ printk(KERN_INFO "%s: This is a 386/486 PCI system, setting cache "
+ "alignment to %x.\n", dev->name,
+ (x86 <= 4 ? 0x4810 : 0x8010));
+#endif
+#else
+ writel(0xE010, ioaddr + PCIBusCfg);
+#warning Processor architecture undefined!
+#endif
+
+ if (dev->if_port == 0)
+ dev->if_port = np->default_port;
+
+ /* Fast Ethernet; 128 byte Tx threshold;
+ Transmit on; Receive on; */
+ np->csr6 = 0x20022002;
+ check_duplex(dev);
+ set_rx_mode(dev);
+ writel(0, ioaddr + RxStartDemand);
+
+ /* Clear and Enable interrupts by setting the interrupt mask. */
+ writel(0x1A0F5, ioaddr + IntrStatus);
+ writel(0x1A0F5, ioaddr + IntrEnable);
+
+}
+
static void tx_timeout(struct net_device *dev)
{
struct netdev_private *np = (struct netdev_private *)dev->priv;
@@ -758,70 +870,61 @@
printk(" %8.8x", (unsigned int)np->rx_ring[i].status);
printk("\n"KERN_DEBUG" Tx ring %8.8x: ", (int)np->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(" %4.4x", np->tx_ring[i].status);
+ printk(" %8.8x", np->tx_ring[i].status);
printk("\n");
}
+ printk(KERN_DEBUG "Tx cur %d Tx dirty %d Tx Full %d, q bytes %d.\n",
+ np->cur_tx, np->dirty_tx, np->tx_full,np->tx_q_bytes);
+ printk(KERN_DEBUG "Tx Descriptor addr %lxh.\n",readl(ioaddr+0x4C));
+
#endif
+ spin_lock_irq(&np->lock);
+ /*
+ * Under high load dirty_tx and the internal tx descriptor pointer
+ * come out of sync, thus perform a software reset and reinitialize
+ * everything.
+ */
+
+ writel(1, dev->base_addr+PCIBusCfg);
+ udelay(10);
+
+ free_rxtx_rings(np);
- /* Perhaps we should reinitialize the hardware here. Just trigger a
- Tx demand for now. */
- writel(0, ioaddr + TxStartDemand);
- dev->if_port = 0;
- /* Stop and restart the chip's Tx processes . */
+ init_rxtx_rings(dev);
+
+ init_registers(dev);
+
+ netif_wake_queue(dev);
+ spin_unlock_irq(&np->lock);
dev->trans_start = jiffies;
np->stats.tx_errors++;
return;
}
-
/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
-static void init_ring(struct net_device *dev)
+static int alloc_ring(struct net_device *dev)
{
struct netdev_private *np = (struct netdev_private *)dev->priv;
- int i;
-
- np->tx_full = 0;
- np->tx_q_bytes = np->cur_rx = np->cur_tx = 0;
- np->dirty_rx = np->dirty_tx = 0;
np->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
- np->rx_head_desc = &np->rx_ring[0];
-
- /* Initial all Rx descriptors. */
- for (i = 0; i < RX_RING_SIZE; i++) {
- np->rx_ring[i].length = cpu_to_le32(np->rx_buf_sz);
- np->rx_ring[i].status = 0;
- np->rx_ring[i].next_desc = virt_to_le32desc(&np->rx_ring[i+1]);
- np->rx_skbuff[i] = 0;
- }
- /* Mark the last entry as wrapping the ring. */
- np->rx_ring[i-1].length |= cpu_to_le32(DescEndRing);
- np->rx_ring[i-1].next_desc = virt_to_le32desc(&np->rx_ring[0]);
-
- /* Fill in the Rx buffers. Handle allocation failure gracefully. */
- for (i = 0; i < RX_RING_SIZE; i++) {
- struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz);
- np->rx_skbuff[i] = skb;
- if (skb == NULL)
- break;
- skb->dev = dev; /* Mark as being used by this device. */
- np->rx_ring[i].buffer1 = virt_to_le32desc(skb->tail);
- np->rx_ring[i].status = cpu_to_le32(DescOwn | DescIntr);
- }
- np->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
- for (i = 0; i < TX_RING_SIZE; i++) {
- np->tx_skbuff[i] = 0;
- np->tx_ring[i].status = 0;
- }
- return;
+ np->rx_ring = pci_alloc_consistent(np->pdev,
+ sizeof(struct w840_rx_desc)*RX_RING_SIZE +
+ sizeof(struct w840_tx_desc)*TX_RING_SIZE,
+ &np->ring_dma_addr);
+ if(!np->rx_ring)
+ return -ENOMEM;
+ init_rxtx_rings(dev);
+ return 0;
}
+
static int start_tx(struct sk_buff *skb, struct net_device *dev)
{
struct netdev_private *np = (struct netdev_private *)dev->priv;
unsigned entry;
+ int len1, len2;
/* Caution: the write order is important here, set the field
with the "ownership" bits last. */
@@ -830,76 +933,27 @@
entry = np->cur_tx % TX_RING_SIZE;
np->tx_skbuff[entry] = skb;
- np->tx_ring[entry].buffer1 = virt_to_le32desc(skb->data);
-
-#define one_buffer
-#define BPT 1022
-#if defined(one_buffer)
- np->tx_ring[entry].length = cpu_to_le32(DescWholePkt | skb->len);
+ np->tx_addr[entry] = pci_map_single(np->pdev,
+ skb->data,skb->len, PCI_DMA_TODEVICE);
+ np->tx_ring[entry].buffer1 = cpu_to_le32(np->tx_addr[entry]);
+ len2 = 0;
+ len1 = skb->len;
+ if(len1 > TX_BUFLIMIT) {
+ len1 = TX_BUFLIMIT;
+ len2 = skb->len-len1;
+ np->tx_ring[entry].buffer2 = cpu_to_le32(np->tx_addr[entry]+TX_BUFLIMIT);
+ }
+ np->tx_ring[entry].length = cpu_to_le32(DescWholePkt | (len2 << 11) | len1);
if (entry >= TX_RING_SIZE-1) /* Wrap ring */
np->tx_ring[entry].length |= cpu_to_le32(DescIntr | DescEndRing);
+ wmb();
np->tx_ring[entry].status = cpu_to_le32(DescOwn);
np->cur_tx++;
-#elif defined(two_buffer)
- if (skb->len > BPT) {
- unsigned int entry1 = ++np->cur_tx % TX_RING_SIZE;
- np->tx_ring[entry].length = cpu_to_le32(DescStartPkt | BPT);
- np->tx_ring[entry1].length = cpu_to_le32(DescEndPkt | (skb->len - BPT));
- np->tx_ring[entry1].buffer1 = virt_to_le32desc((skb->data) + BPT);
- np->tx_ring[entry1].status = cpu_to_le32(DescOwn);
- np->tx_ring[entry].status = cpu_to_le32(DescOwn);
- if (entry >= TX_RING_SIZE-1)
- np->tx_ring[entry].length |= cpu_to_le32(DescIntr|DescEndRing);
- else if (entry1 >= TX_RING_SIZE-1)
- np->tx_ring[entry1].length |= cpu_to_le32(DescIntr|DescEndRing);
- np->cur_tx++;
- } else {
- np->tx_ring[entry].length = cpu_to_le32(DescWholePkt | skb->len);
- if (entry >= TX_RING_SIZE-1) /* Wrap ring */
- np->tx_ring[entry].length |= cpu_to_le32(DescIntr | DescEndRing);
- np->tx_ring[entry].status = cpu_to_le32(DescOwn);
- np->cur_tx++;
- }
-#elif defined(split_buffer)
- {
- /* Work around the Tx-FIFO-full bug by splitting our transmit packet
- into two pieces, the first which may be loaded without overflowing
- the FIFO, and the second which contains the remainder of the
- packet. When we get a Tx-done interrupt that frees enough room
- in the FIFO we mark the remainder of the packet as loadable.
-
- This has the problem that the Tx descriptors are written both
- here and in the interrupt handler.
- */
-
- int buf1size = TX_FIFO_SIZE - np->tx_q_bytes;
- int buf2size = skb->len - buf1size;
-
- if (buf2size <= 0) { /* We fit into one descriptor. */
- np->tx_ring[entry].length = cpu_to_le32(DescWholePkt | skb->len);
- } else { /* We must use two descriptors. */
- unsigned int entry2;
- np->tx_ring[entry].length =
- cpu_to_le32(DescIntr | DescStartPkt | buf1size);
- if (entry >= TX_RING_SIZE-1) { /* Wrap ring */
- np->tx_ring[entry].length |= cpu_to_le32(DescEndRing);
- entry2 = 0;
- } else
- entry2 = entry + 1;
- np->cur_tx++;
- np->tx_ring[entry2].buffer1 =
- virt_to_le32desc(skb->data + buf1size);
- np->tx_ring[entry2].length = cpu_to_le32(DescEndPkt | buf2size);
- if (entry2 >= TX_RING_SIZE-1) /* Wrap ring */
- np->tx_ring[entry2].length |= cpu_to_le32(DescEndRing);
- }
- np->tx_ring[entry].status = cpu_to_le32(DescOwn);
- np->cur_tx++;
- }
-#endif
+
np->tx_q_bytes += skb->len;
writel(0, dev->base_addr + TxStartDemand);
+ spin_lock_irq(&np->lock);
/* Work around horrible bug in the chip by marking the queue as full
when we do not have FIFO room for a maximum sized packet. */
if (np->cur_tx - np->dirty_tx > TX_QUEUE_LEN)
@@ -911,6 +965,7 @@
netif_stop_queue(dev);
dev->trans_start = jiffies;
+ spin_unlock_irq(&np->lock);
if (debug > 4) {
printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n",
@@ -977,6 +1032,9 @@
np->stats.tx_packets++;
}
/* Free the original skb. */
+ pci_unmap_single(np->pdev,np->tx_addr[entry],
+ np->tx_skbuff[entry]->len,
+ PCI_DMA_TODEVICE);
np->tx_q_bytes -= np->tx_skbuff[entry]->len;
dev_kfree_skb_irq(np->tx_skbuff[entry]);
np->tx_skbuff[entry] = 0;
@@ -1070,6 +1128,9 @@
&& (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
skb->dev = dev;
skb_reserve(skb, 2); /* 16 byte align the IP header */
+ pci_dma_sync_single(np->pdev,np->rx_addr[entry],
+ np->rx_skbuff[entry]->len,
+ PCI_DMA_FROMDEVICE);
/* Call copy + cksum if available. */
#if HAS_IP_COPYSUM
eth_copy_and_sum(skb, np->rx_skbuff[entry]->tail, pkt_len, 0);
@@ -1079,15 +1140,11 @@
pkt_len);
#endif
} else {
- char *temp = skb_put(skb = np->rx_skbuff[entry], pkt_len);
+ pci_unmap_single(np->pdev,np->rx_addr[entry],
+ np->rx_skbuff[entry]->len,
+ PCI_DMA_FROMDEVICE);
+ skb_put(skb = np->rx_skbuff[entry], pkt_len);
np->rx_skbuff[entry] = NULL;
-#ifndef final_version /* Remove after testing. */
- if (le32desc_to_virt(desc->buffer1) != temp)
- printk(KERN_ERR "%s: Internal fault: The skbuff addresses "
- "do not match in netdev_rx: %p vs. %p / %p.\n",
- dev->name, le32desc_to_virt(desc->buffer1),
- skb->head, temp);
-#endif
}
#ifndef final_version /* Remove after testing. */
/* You will want this info for the initial debug. */
@@ -1122,8 +1179,12 @@
if (skb == NULL)
break; /* Better luck next round. */
skb->dev = dev; /* Mark as being used by this device. */
- np->rx_ring[entry].buffer1 = virt_to_le32desc(skb->tail);
+ np->rx_addr[entry] = pci_map_single(np->pdev,
+ skb->tail,
+ skb->len, PCI_DMA_FROMDEVICE);
+ np->rx_ring[entry].buffer1 = cpu_to_le32(np->rx_addr[entry]);
}
+ wmb();
np->rx_ring[entry].status = cpu_to_le32(DescOwn);
}
@@ -1141,7 +1202,21 @@
if (intr_status == 0xffffffff)
return;
if (intr_status & TxFIFOUnderflow) {
- np->csr6 += 0x4000; /* Bump up the Tx threshold */
+ /* Bump up the Tx threshold */
+#if 0
+ /* This causes lots of dropped packets,
+ * and under high load even tx_timeouts
+ */
+ np->csr6 += 0x4000;
+#else
+ int cur = (np->csr6 >> 14)&0x7f;
+ if (cur < 64)
+ cur *= 2;
+ else
+ cur = 0; /* load full packet before starting */
+ np->csr6 &= ~(0x7F << 14);
+ np->csr6 |= cur<<14;
+#endif
printk(KERN_DEBUG "%s: Tx underflow, increasing threshold to %8.8x.\n",
dev->name, np->csr6);
writel(np->csr6, ioaddr + NetworkConfig);
@@ -1270,13 +1345,13 @@
#ifdef __i386__
if (debug > 2) {
printk("\n"KERN_DEBUG" Tx ring at %8.8x:\n",
- (int)virt_to_le32desc(np->tx_ring));
+ (int)np->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
printk(" #%d desc. %4.4x %4.4x %8.8x.\n",
i, np->tx_ring[i].length,
np->tx_ring[i].status, np->tx_ring[i].buffer1);
printk("\n"KERN_DEBUG " Rx ring %8.8x:\n",
- (int)virt_to_le32desc(np->rx_ring));
+ (int)np->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++) {
printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n",
i, np->rx_ring[i].length,
@@ -1289,19 +1364,7 @@
del_timer_sync(&np->timer);
- /* Free all the skbuffs in the Rx queue. */
- for (i = 0; i < RX_RING_SIZE; i++) {
- np->rx_ring[i].status = 0;
- if (np->rx_skbuff[i]) {
- dev_kfree_skb(np->rx_skbuff[i]);
- }
- np->rx_skbuff[i] = 0;
- }
- for (i = 0; i < TX_RING_SIZE; i++) {
- if (np->tx_skbuff[i])
- dev_kfree_skb(np->tx_skbuff[i]);
- np->tx_skbuff[i] = 0;
- }
+ free_rxtx_rings(np);
return 0;
}
@@ -1311,7 +1374,7 @@
struct net_device *dev = pdev->driver_data;
/* No need to check MOD_IN_USE, as sys_delete_module() checks. */
- while (dev) {
+ if (dev) {
struct netdev_private *np = (void *)(dev->priv);
unregister_netdev(dev);
#ifdef USE_IO_OPS