The feature prevents mistrusted filesystems to grow a large number of dirty
pages before throttling. For such filesystems balance_dirty_pages always
check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under
"freerun", it's not allowed to skip bdi checks. The only use case for now is
fuse: it sets bdi max_ratio to 1% by default and system administrators are
supposed to expect that this limit won't be exceeded.
The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag.
A filesystem may set the flag when it initializes its BDI.
Changed in v2 (thanks to Andrew Morton):
- added a few explanatory comments
- cleaned up the mess in backing_dev_info foo_stamp fields: now it's clearly
stated that bw_time_stamp is measured in jiffies; renamed other foo_stamp
fields to reflect that they are in units of number-of-pages.
Changed in v3 (thanks to Jan Kara)
- made strictlimit a bdi flag
- introduced "bdi_dirty <= bdi_freerun" check
- removed BDI_idle and BDI_WRITTEN_BACK as redundant
- moved foo_stamp cleanup to separate patch because it's not related
to strictlimit feature anymore
- corrected spelling.
Signed-off-by: Maxim Patlasov <[email protected]>
---
fs/fuse/inode.c | 2
include/linux/backing-dev.h | 3 +
mm/page-writeback.c | 190 ++++++++++++++++++++++++++++++++++++-------
3 files changed, 164 insertions(+), 31 deletions(-)
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 9a0cdde..9aa1932 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -929,7 +929,7 @@ static int fuse_bdi_init(struct fuse_conn *fc, struct super_block *sb)
fc->bdi.name = "fuse";
fc->bdi.ra_pages = (VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
/* fuse does it's own writeback accounting */
- fc->bdi.capabilities = BDI_CAP_NO_ACCT_WB;
+ fc->bdi.capabilities = BDI_CAP_NO_ACCT_WB | BDI_CAP_STRICTLIMIT;
err = bdi_init(&fc->bdi);
if (err)
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index ee7eb1a..7166489 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -244,6 +244,8 @@ int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned int max_ratio);
* BDI_CAP_EXEC_MAP: Can be mapped for execution
*
* BDI_CAP_SWAP_BACKED: Count shmem/tmpfs objects as swap-backed.
+ *
+ * BDI_CAP_STRICTLIMIT: Keep number of dirty pages below bdi threshold.
*/
#define BDI_CAP_NO_ACCT_DIRTY 0x00000001
#define BDI_CAP_NO_WRITEBACK 0x00000002
@@ -255,6 +257,7 @@ int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned int max_ratio);
#define BDI_CAP_NO_ACCT_WB 0x00000080
#define BDI_CAP_SWAP_BACKED 0x00000100
#define BDI_CAP_STABLE_WRITES 0x00000200
+#define BDI_CAP_STRICTLIMIT 0x00000400
#define BDI_CAP_VMFLAGS \
(BDI_CAP_READ_MAP | BDI_CAP_WRITE_MAP | BDI_CAP_EXEC_MAP)
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 088a8db..1f9b5e4 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -585,6 +585,37 @@ unsigned long bdi_dirty_limit(struct backing_dev_info *bdi, unsigned long dirty)
}
/*
+ * setpoint - dirty 3
+ * f(dirty) := 1.0 + (----------------)
+ * limit - setpoint
+ *
+ * it's a 3rd order polynomial that subjects to
+ *
+ * (1) f(freerun) = 2.0 => rampup dirty_ratelimit reasonably fast
+ * (2) f(setpoint) = 1.0 => the balance point
+ * (3) f(limit) = 0 => the hard limit
+ * (4) df/dx <= 0 => negative feedback control
+ * (5) the closer to setpoint, the smaller |df/dx| (and the reverse)
+ * => fast response on large errors; small oscillation near setpoint
+ */
+static inline long long pos_ratio_polynom(unsigned long setpoint,
+ unsigned long dirty,
+ unsigned long limit)
+{
+ long long pos_ratio;
+ long x;
+
+ x = div_s64(((s64)setpoint - (s64)dirty) << RATELIMIT_CALC_SHIFT,
+ limit - setpoint + 1);
+ pos_ratio = x;
+ pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
+ pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
+ pos_ratio += 1 << RATELIMIT_CALC_SHIFT;
+
+ return pos_ratio;
+}
+
+/*
* Dirty position control.
*
* (o) global/bdi setpoints
@@ -682,26 +713,75 @@ static unsigned long bdi_position_ratio(struct backing_dev_info *bdi,
/*
* global setpoint
*
- * setpoint - dirty 3
- * f(dirty) := 1.0 + (----------------)
- * limit - setpoint
+ * See comment for pos_ratio_polynom().
+ */
+ setpoint = (freerun + limit) / 2;
+ pos_ratio = pos_ratio_polynom(setpoint, dirty, limit);
+
+ /*
+ * The strictlimit feature is a tool preventing mistrusted filesystems
+ * from growing a large number of dirty pages before throttling. For
+ * such filesystems balance_dirty_pages always checks bdi counters
+ * against bdi limits. Even if global "nr_dirty" is under "freerun".
+ * This is especially important for fuse which sets bdi->max_ratio to
+ * 1% by default. Without strictlimit feature, fuse writeback may
+ * consume arbitrary amount of RAM because it is accounted in
+ * NR_WRITEBACK_TEMP which is not involved in calculating "nr_dirty".
*
- * it's a 3rd order polynomial that subjects to
+ * Here, in bdi_position_ratio(), we calculate pos_ratio based on
+ * two values: bdi_dirty and bdi_thresh. Let's consider an example:
+ * total amount of RAM is 16GB, bdi->max_ratio is equal to 1%, global
+ * limits are set by default to 10% and 20% (background and throttle).
+ * Then bdi_thresh is 1% of 20% of 16GB. This amounts to ~8K pages.
+ * bdi_dirty_limit(bdi, bg_thresh) is about ~4K pages. bdi_setpoint is
+ * about ~6K pages (as the average of background and throttle bdi
+ * limits). The 3rd order polynomial will provide positive feedback if
+ * bdi_dirty is under bdi_setpoint and vice versa.
*
- * (1) f(freerun) = 2.0 => rampup dirty_ratelimit reasonably fast
- * (2) f(setpoint) = 1.0 => the balance point
- * (3) f(limit) = 0 => the hard limit
- * (4) df/dx <= 0 => negative feedback control
- * (5) the closer to setpoint, the smaller |df/dx| (and the reverse)
- * => fast response on large errors; small oscillation near setpoint
+ * Note, that we cannot use global counters in these calculations
+ * because we want to throttle process writing to a strictlimit BDI
+ * much earlier than global "freerun" is reached (~23MB vs. ~2.3GB
+ * in the example above).
*/
- setpoint = (freerun + limit) / 2;
- x = div_s64(((s64)setpoint - (s64)dirty) << RATELIMIT_CALC_SHIFT,
- limit - setpoint + 1);
- pos_ratio = x;
- pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
- pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
- pos_ratio += 1 << RATELIMIT_CALC_SHIFT;
+ if (unlikely(bdi->capabilities & BDI_CAP_STRICTLIMIT)) {
+ long long bdi_pos_ratio;
+ unsigned long bdi_bg_thresh;
+
+ if (bdi_dirty < 8)
+ return min_t(long long, pos_ratio * 2,
+ 2 << RATELIMIT_CALC_SHIFT);
+
+ if (bdi_dirty >= bdi_thresh)
+ return 0;
+
+ bdi_bg_thresh = div_u64((u64)bdi_thresh * bg_thresh, thresh);
+ bdi_setpoint = dirty_freerun_ceiling(bdi_thresh,
+ bdi_bg_thresh);
+
+ if (bdi_setpoint == 0 || bdi_setpoint == bdi_thresh)
+ return 0;
+
+ bdi_pos_ratio = pos_ratio_polynom(bdi_setpoint, bdi_dirty,
+ bdi_thresh);
+
+ /*
+ * Typically, for strictlimit case, bdi_setpoint << setpoint
+ * and pos_ratio >> bdi_pos_ratio. In the other words global
+ * state ("dirty") is not limiting factor and we have to
+ * make decision based on bdi counters. But there is an
+ * important case when global pos_ratio should get precedence:
+ * global limits are exceeded (e.g. due to activities on other
+ * BDIs) while given strictlimit BDI is below limit.
+ *
+ * "pos_ratio * bdi_pos_ratio" would work for the case above,
+ * but it would look too non-natural for the case of all
+ * activity in the system coming from a single strictlimit BDI
+ * with bdi->max_ratio == 100%.
+ */
+ pos_ratio = min(pos_ratio, bdi_pos_ratio);
+
+ return min_t(long long, pos_ratio, 2 << RATELIMIT_CALC_SHIFT);
+ }
/*
* We have computed basic pos_ratio above based on global situation. If
@@ -994,6 +1074,27 @@ static void bdi_update_dirty_ratelimit(struct backing_dev_info *bdi,
* keep that period small to reduce time lags).
*/
step = 0;
+
+ /*
+ * For strictlimit case, calculations above were based on bdi counters
+ * and limits (starting from pos_ratio = bdi_position_ratio() and up to
+ * balanced_dirty_ratelimit = task_ratelimit * write_bw / dirty_rate).
+ * Hence, to calculate "step" properly, we have to use bdi_dirty as
+ * "dirty" and bdi_setpoint as "setpoint".
+ *
+ * We rampup dirty_ratelimit forcibly if bdi_dirty is low because
+ * it's possible that bdi_thresh is close to zero due to inactivity
+ * of backing device (see the implementation of bdi_dirty_limit()).
+ */
+ if (unlikely(bdi->capabilities & BDI_CAP_STRICTLIMIT)) {
+ dirty = bdi_dirty;
+ if (bdi_dirty < 8)
+ setpoint = bdi_dirty + 1;
+ else
+ setpoint = (bdi_thresh +
+ bdi_dirty_limit(bdi, bg_thresh)) / 2;
+ }
+
if (dirty < setpoint) {
x = min(bdi->balanced_dirty_ratelimit,
min(balanced_dirty_ratelimit, task_ratelimit));
@@ -1198,6 +1299,21 @@ static long bdi_min_pause(struct backing_dev_info *bdi,
return pages >= DIRTY_POLL_THRESH ? 1 + t / 2 : t;
}
+static inline bool below_freerun_ceiling(unsigned long nr,
+ unsigned long thresh,
+ unsigned long bg_thresh,
+ unsigned long now)
+{
+ if (nr <= dirty_freerun_ceiling(thresh, bg_thresh)) {
+ current->dirty_paused_when = now;
+ current->nr_dirtied = 0;
+ current->nr_dirtied_pause = dirty_poll_interval(nr, thresh);
+ return true;
+ }
+
+ return false;
+}
+
/*
* balance_dirty_pages() must be called by processes which are generating dirty
* data. It looks at the number of dirty pages in the machine and will force
@@ -1212,7 +1328,6 @@ static void balance_dirty_pages(struct address_space *mapping,
unsigned long bdi_reclaimable;
unsigned long nr_dirty; /* = file_dirty + writeback + unstable_nfs */
unsigned long bdi_dirty;
- unsigned long freerun;
unsigned long background_thresh;
unsigned long dirty_thresh;
unsigned long bdi_thresh;
@@ -1226,6 +1341,7 @@ static void balance_dirty_pages(struct address_space *mapping,
unsigned long dirty_ratelimit;
unsigned long pos_ratio;
struct backing_dev_info *bdi = mapping->backing_dev_info;
+ bool strictlimit = bdi->capabilities & BDI_CAP_STRICTLIMIT;
unsigned long start_time = jiffies;
for (;;) {
@@ -1248,18 +1364,10 @@ static void balance_dirty_pages(struct address_space *mapping,
* catch-up. This avoids (excessively) small writeouts
* when the bdi limits are ramping up.
*/
- freerun = dirty_freerun_ceiling(dirty_thresh,
- background_thresh);
- if (nr_dirty <= freerun) {
- current->dirty_paused_when = now;
- current->nr_dirtied = 0;
- current->nr_dirtied_pause =
- dirty_poll_interval(nr_dirty, dirty_thresh);
+ if (likely(!strictlimit) &&
+ below_freerun_ceiling(nr_dirty, dirty_thresh,
+ background_thresh, now))
break;
- }
-
- if (unlikely(!writeback_in_progress(bdi)))
- bdi_start_background_writeback(bdi);
/*
* bdi_thresh is not treated as some limiting factor as
@@ -1296,8 +1404,30 @@ static void balance_dirty_pages(struct address_space *mapping,
bdi_stat(bdi, BDI_WRITEBACK);
}
+ /*
+ * Throttle it only when the background writeback cannot
+ * catch-up. But this time (strictlimit case) make decision
+ * based on the bdi counters and limits. Small writeouts when
+ * the bdi limits are ramping up are the price we consciously
+ * pay for strictlimit-ing.
+ */
+ if (unlikely(strictlimit)) {
+ unsigned long bdi_bg_thresh;
+
+ bdi_bg_thresh = div_u64((u64)bdi_thresh *
+ background_thresh,
+ dirty_thresh);
+
+ if (below_freerun_ceiling(bdi_dirty, bdi_thresh,
+ bdi_bg_thresh, now))
+ break;
+ }
+
+ if (unlikely(!writeback_in_progress(bdi)))
+ bdi_start_background_writeback(bdi);
+
dirty_exceeded = (bdi_dirty > bdi_thresh) &&
- (nr_dirty > dirty_thresh);
+ ((nr_dirty > dirty_thresh) || strictlimit);
if (dirty_exceeded && !bdi->dirty_exceeded)
bdi->dirty_exceeded = 1;
On Fri 05-07-13 19:53:36, Maxim Patlasov wrote:
> The feature prevents mistrusted filesystems to grow a large number of dirty
> pages before throttling. For such filesystems balance_dirty_pages always
> check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under
> "freerun", it's not allowed to skip bdi checks. The only use case for now is
> fuse: it sets bdi max_ratio to 1% by default and system administrators are
> supposed to expect that this limit won't be exceeded.
>
> The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag.
> A filesystem may set the flag when it initializes its BDI.
>
> Changed in v2 (thanks to Andrew Morton):
> - added a few explanatory comments
> - cleaned up the mess in backing_dev_info foo_stamp fields: now it's clearly
> stated that bw_time_stamp is measured in jiffies; renamed other foo_stamp
> fields to reflect that they are in units of number-of-pages.
>
> Changed in v3 (thanks to Jan Kara)
> - made strictlimit a bdi flag
> - introduced "bdi_dirty <= bdi_freerun" check
> - removed BDI_idle and BDI_WRITTEN_BACK as redundant
> - moved foo_stamp cleanup to separate patch because it's not related
> to strictlimit feature anymore
> - corrected spelling.
I have some comments below but the patch is much better! Thanks!
> Signed-off-by: Maxim Patlasov <[email protected]>
> ---
> fs/fuse/inode.c | 2
> include/linux/backing-dev.h | 3 +
> mm/page-writeback.c | 190 ++++++++++++++++++++++++++++++++++++-------
> 3 files changed, 164 insertions(+), 31 deletions(-)
>
> diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
> index 9a0cdde..9aa1932 100644
> --- a/fs/fuse/inode.c
> +++ b/fs/fuse/inode.c
> @@ -929,7 +929,7 @@ static int fuse_bdi_init(struct fuse_conn *fc, struct super_block *sb)
> fc->bdi.name = "fuse";
> fc->bdi.ra_pages = (VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
> /* fuse does it's own writeback accounting */
> - fc->bdi.capabilities = BDI_CAP_NO_ACCT_WB;
> + fc->bdi.capabilities = BDI_CAP_NO_ACCT_WB | BDI_CAP_STRICTLIMIT;
>
> err = bdi_init(&fc->bdi);
> if (err)
> diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
> index ee7eb1a..7166489 100644
> --- a/include/linux/backing-dev.h
> +++ b/include/linux/backing-dev.h
> @@ -244,6 +244,8 @@ int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned int max_ratio);
> * BDI_CAP_EXEC_MAP: Can be mapped for execution
> *
> * BDI_CAP_SWAP_BACKED: Count shmem/tmpfs objects as swap-backed.
> + *
> + * BDI_CAP_STRICTLIMIT: Keep number of dirty pages below bdi threshold.
> */
> #define BDI_CAP_NO_ACCT_DIRTY 0x00000001
> #define BDI_CAP_NO_WRITEBACK 0x00000002
> @@ -255,6 +257,7 @@ int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned int max_ratio);
> #define BDI_CAP_NO_ACCT_WB 0x00000080
> #define BDI_CAP_SWAP_BACKED 0x00000100
> #define BDI_CAP_STABLE_WRITES 0x00000200
> +#define BDI_CAP_STRICTLIMIT 0x00000400
>
> #define BDI_CAP_VMFLAGS \
> (BDI_CAP_READ_MAP | BDI_CAP_WRITE_MAP | BDI_CAP_EXEC_MAP)
> diff --git a/mm/page-writeback.c b/mm/page-writeback.c
> index 088a8db..1f9b5e4 100644
> --- a/mm/page-writeback.c
> +++ b/mm/page-writeback.c
> @@ -585,6 +585,37 @@ unsigned long bdi_dirty_limit(struct backing_dev_info *bdi, unsigned long dirty)
> }
>
> /*
> + * setpoint - dirty 3
> + * f(dirty) := 1.0 + (----------------)
> + * limit - setpoint
> + *
> + * it's a 3rd order polynomial that subjects to
> + *
> + * (1) f(freerun) = 2.0 => rampup dirty_ratelimit reasonably fast
> + * (2) f(setpoint) = 1.0 => the balance point
> + * (3) f(limit) = 0 => the hard limit
> + * (4) df/dx <= 0 => negative feedback control
> + * (5) the closer to setpoint, the smaller |df/dx| (and the reverse)
> + * => fast response on large errors; small oscillation near setpoint
> + */
> +static inline long long pos_ratio_polynom(unsigned long setpoint,
> + unsigned long dirty,
> + unsigned long limit)
> +{
> + long long pos_ratio;
> + long x;
> +
> + x = div_s64(((s64)setpoint - (s64)dirty) << RATELIMIT_CALC_SHIFT,
> + limit - setpoint + 1);
> + pos_ratio = x;
> + pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
> + pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
> + pos_ratio += 1 << RATELIMIT_CALC_SHIFT;
> +
> + return pos_ratio;
> +}
I think you should limit return value of this function to <-2,2> range to
save us from surprises when dirty > limit or dirty < setpoint.
> +
> +/*
> * Dirty position control.
> *
> * (o) global/bdi setpoints
> @@ -682,26 +713,75 @@ static unsigned long bdi_position_ratio(struct backing_dev_info *bdi,
> /*
> * global setpoint
> *
> - * setpoint - dirty 3
> - * f(dirty) := 1.0 + (----------------)
> - * limit - setpoint
> + * See comment for pos_ratio_polynom().
> + */
> + setpoint = (freerun + limit) / 2;
> + pos_ratio = pos_ratio_polynom(setpoint, dirty, limit);
> +
> + /*
> + * The strictlimit feature is a tool preventing mistrusted filesystems
> + * from growing a large number of dirty pages before throttling. For
> + * such filesystems balance_dirty_pages always checks bdi counters
> + * against bdi limits. Even if global "nr_dirty" is under "freerun".
> + * This is especially important for fuse which sets bdi->max_ratio to
> + * 1% by default. Without strictlimit feature, fuse writeback may
> + * consume arbitrary amount of RAM because it is accounted in
> + * NR_WRITEBACK_TEMP which is not involved in calculating "nr_dirty".
I know this isn't directly related to this patch, but why isn't
NR_WRITEBACK_TEMP accounted in nr_dirty? I presume this is due to possible
deadlocks when you have dirty page against fuse, then to clean it, you have
to submit it to userspace process which must be able to dirty some pages to
actually write the page. Am I right?
But then if we have 'strictlimit' properly implemented, NR_WRITEBACK_TEMP
hack shouldn't be necessary anymore. We just need to make sure bdi_limit is
low enough that fuse daemon doesn't hit the global dirty limit... This gets
somewhat tricky as all fuse filesystems in the system together shouldn't be
able to create too many dirty pages but the same problem is there with
NR_WRITEBACK_TEMP only it would demonstrate itself by driving the machine
OOM instead of locking up in balance_dirty_pages().
If I'm right in the above, then removing NR_WRITEBACK_TEMP would be a nice
followup patch.
> *
> - * it's a 3rd order polynomial that subjects to
> + * Here, in bdi_position_ratio(), we calculate pos_ratio based on
> + * two values: bdi_dirty and bdi_thresh. Let's consider an example:
> + * total amount of RAM is 16GB, bdi->max_ratio is equal to 1%, global
> + * limits are set by default to 10% and 20% (background and throttle).
> + * Then bdi_thresh is 1% of 20% of 16GB. This amounts to ~8K pages.
> + * bdi_dirty_limit(bdi, bg_thresh) is about ~4K pages. bdi_setpoint is
> + * about ~6K pages (as the average of background and throttle bdi
> + * limits). The 3rd order polynomial will provide positive feedback if
> + * bdi_dirty is under bdi_setpoint and vice versa.
> *
> - * (1) f(freerun) = 2.0 => rampup dirty_ratelimit reasonably fast
> - * (2) f(setpoint) = 1.0 => the balance point
> - * (3) f(limit) = 0 => the hard limit
> - * (4) df/dx <= 0 => negative feedback control
> - * (5) the closer to setpoint, the smaller |df/dx| (and the reverse)
> - * => fast response on large errors; small oscillation near setpoint
> + * Note, that we cannot use global counters in these calculations
> + * because we want to throttle process writing to a strictlimit BDI
> + * much earlier than global "freerun" is reached (~23MB vs. ~2.3GB
> + * in the example above).
> */
> - setpoint = (freerun + limit) / 2;
> - x = div_s64(((s64)setpoint - (s64)dirty) << RATELIMIT_CALC_SHIFT,
> - limit - setpoint + 1);
> - pos_ratio = x;
> - pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
> - pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
> - pos_ratio += 1 << RATELIMIT_CALC_SHIFT;
> + if (unlikely(bdi->capabilities & BDI_CAP_STRICTLIMIT)) {
> + long long bdi_pos_ratio;
> + unsigned long bdi_bg_thresh;
> +
> + if (bdi_dirty < 8)
> + return min_t(long long, pos_ratio * 2,
> + 2 << RATELIMIT_CALC_SHIFT);
> +
> + if (bdi_dirty >= bdi_thresh)
> + return 0;
> +
> + bdi_bg_thresh = div_u64((u64)bdi_thresh * bg_thresh, thresh);
> + bdi_setpoint = dirty_freerun_ceiling(bdi_thresh,
> + bdi_bg_thresh);
> +
> + if (bdi_setpoint == 0 || bdi_setpoint == bdi_thresh)
> + return 0;
> +
> + bdi_pos_ratio = pos_ratio_polynom(bdi_setpoint, bdi_dirty,
> + bdi_thresh);
> +
> + /*
> + * Typically, for strictlimit case, bdi_setpoint << setpoint
> + * and pos_ratio >> bdi_pos_ratio. In the other words global
> + * state ("dirty") is not limiting factor and we have to
> + * make decision based on bdi counters. But there is an
> + * important case when global pos_ratio should get precedence:
> + * global limits are exceeded (e.g. due to activities on other
> + * BDIs) while given strictlimit BDI is below limit.
> + *
> + * "pos_ratio * bdi_pos_ratio" would work for the case above,
> + * but it would look too non-natural for the case of all
> + * activity in the system coming from a single strictlimit BDI
> + * with bdi->max_ratio == 100%.
> + */
> + pos_ratio = min(pos_ratio, bdi_pos_ratio);
This somewhat changes the dynamics of the control system. Normally,
pos_ratio value can be well over 3 (when globally we are at freerun and bdi
is well below bdi setpoint). Now the maximum pos_ratio in the same
situation is 2. Since I cannot come up with a better alternative to your
min(), leave it there but please make a short note in the comment that we
might want to tweak this if we observe the control system is too slow to
adapt.
> +
> + return min_t(long long, pos_ratio, 2 << RATELIMIT_CALC_SHIFT);
> + }
>
> /*
> * We have computed basic pos_ratio above based on global situation. If
> @@ -994,6 +1074,27 @@ static void bdi_update_dirty_ratelimit(struct backing_dev_info *bdi,
> * keep that period small to reduce time lags).
> */
> step = 0;
> +
> + /*
> + * For strictlimit case, calculations above were based on bdi counters
> + * and limits (starting from pos_ratio = bdi_position_ratio() and up to
> + * balanced_dirty_ratelimit = task_ratelimit * write_bw / dirty_rate).
> + * Hence, to calculate "step" properly, we have to use bdi_dirty as
> + * "dirty" and bdi_setpoint as "setpoint".
> + *
> + * We rampup dirty_ratelimit forcibly if bdi_dirty is low because
> + * it's possible that bdi_thresh is close to zero due to inactivity
> + * of backing device (see the implementation of bdi_dirty_limit()).
> + */
> + if (unlikely(bdi->capabilities & BDI_CAP_STRICTLIMIT)) {
> + dirty = bdi_dirty;
> + if (bdi_dirty < 8)
> + setpoint = bdi_dirty + 1;
> + else
> + setpoint = (bdi_thresh +
> + bdi_dirty_limit(bdi, bg_thresh)) / 2;
> + }
> +
Ho, hum.... but if bdi_dirty < bdi_setpoint but globally we are above
setpoint, resulting pos_ratio will be < 1. Then the logic below this place
will result in step == 0 (as current dirty_ratelimit is likely to be
greater than the new one computed now) and thus we won't change the
ratelimit for the bdi at all. But we should reduce the ratelimit to
ease the total pressure on the system.
So I think you need to make the condition below something like:
if (dirty < setpoint &&
(!(bdi->capabilities & BDI_CAP_STRICTLIMIT) ||
bdi_dirty < bdi_setpoint))
> if (dirty < setpoint) {
> x = min(bdi->balanced_dirty_ratelimit,
> min(balanced_dirty_ratelimit, task_ratelimit));
> @@ -1198,6 +1299,21 @@ static long bdi_min_pause(struct backing_dev_info *bdi,
> return pages >= DIRTY_POLL_THRESH ? 1 + t / 2 : t;
> }
>
> +static inline bool below_freerun_ceiling(unsigned long nr,
> + unsigned long thresh,
> + unsigned long bg_thresh,
> + unsigned long now)
> +{
> + if (nr <= dirty_freerun_ceiling(thresh, bg_thresh)) {
> + current->dirty_paused_when = now;
> + current->nr_dirtied = 0;
> + current->nr_dirtied_pause = dirty_poll_interval(nr, thresh);
> + return true;
> + }
> +
> + return false;
> +}
> +
> /*
> * balance_dirty_pages() must be called by processes which are generating dirty
> * data. It looks at the number of dirty pages in the machine and will force
> @@ -1212,7 +1328,6 @@ static void balance_dirty_pages(struct address_space *mapping,
> unsigned long bdi_reclaimable;
> unsigned long nr_dirty; /* = file_dirty + writeback + unstable_nfs */
> unsigned long bdi_dirty;
> - unsigned long freerun;
> unsigned long background_thresh;
> unsigned long dirty_thresh;
> unsigned long bdi_thresh;
> @@ -1226,6 +1341,7 @@ static void balance_dirty_pages(struct address_space *mapping,
> unsigned long dirty_ratelimit;
> unsigned long pos_ratio;
> struct backing_dev_info *bdi = mapping->backing_dev_info;
> + bool strictlimit = bdi->capabilities & BDI_CAP_STRICTLIMIT;
> unsigned long start_time = jiffies;
>
> for (;;) {
> @@ -1248,18 +1364,10 @@ static void balance_dirty_pages(struct address_space *mapping,
> * catch-up. This avoids (excessively) small writeouts
> * when the bdi limits are ramping up.
> */
> - freerun = dirty_freerun_ceiling(dirty_thresh,
> - background_thresh);
> - if (nr_dirty <= freerun) {
> - current->dirty_paused_when = now;
> - current->nr_dirtied = 0;
> - current->nr_dirtied_pause =
> - dirty_poll_interval(nr_dirty, dirty_thresh);
> + if (likely(!strictlimit) &&
> + below_freerun_ceiling(nr_dirty, dirty_thresh,
> + background_thresh, now))
Hiding the 'current' update in the helper function is unexpected. I'd
rather have the 'bdi_dirty' computation hidden in a helper function and
perform it either before or after freerun check depending on whether we are
in strictlimit mode or not.
> break;
> - }
> -
> - if (unlikely(!writeback_in_progress(bdi)))
> - bdi_start_background_writeback(bdi);
>
> /*
> * bdi_thresh is not treated as some limiting factor as
> @@ -1296,8 +1404,30 @@ static void balance_dirty_pages(struct address_space *mapping,
> bdi_stat(bdi, BDI_WRITEBACK);
> }
>
> + /*
> + * Throttle it only when the background writeback cannot
> + * catch-up. But this time (strictlimit case) make decision
> + * based on the bdi counters and limits. Small writeouts when
> + * the bdi limits are ramping up are the price we consciously
> + * pay for strictlimit-ing.
> + */
> + if (unlikely(strictlimit)) {
> + unsigned long bdi_bg_thresh;
> +
> + bdi_bg_thresh = div_u64((u64)bdi_thresh *
> + background_thresh,
> + dirty_thresh);
> +
> + if (below_freerun_ceiling(bdi_dirty, bdi_thresh,
> + bdi_bg_thresh, now))
> + break;
> + }
> +
> + if (unlikely(!writeback_in_progress(bdi)))
> + bdi_start_background_writeback(bdi);
> +
> dirty_exceeded = (bdi_dirty > bdi_thresh) &&
> - (nr_dirty > dirty_thresh);
> + ((nr_dirty > dirty_thresh) || strictlimit);
> if (dirty_exceeded && !bdi->dirty_exceeded)
> bdi->dirty_exceeded = 1;
Honza
--
Jan Kara <[email protected]>
SUSE Labs, CR
On Thu, Jul 11, 2013 at 10:51 PM, Jan Kara <[email protected]> wrote:
> On Fri 05-07-13 19:53:36, Maxim Patlasov wrote:
>> The feature prevents mistrusted filesystems to grow a large number of dirty
>> pages before throttling. For such filesystems balance_dirty_pages always
>> check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under
>> "freerun", it's not allowed to skip bdi checks. The only use case for now is
>> fuse: it sets bdi max_ratio to 1% by default and system administrators are
>> supposed to expect that this limit won't be exceeded.
>>
>> The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag.
>> A filesystem may set the flag when it initializes its BDI.
>>
>> Changed in v2 (thanks to Andrew Morton):
>> - added a few explanatory comments
>> - cleaned up the mess in backing_dev_info foo_stamp fields: now it's clearly
>> stated that bw_time_stamp is measured in jiffies; renamed other foo_stamp
>> fields to reflect that they are in units of number-of-pages.
>>
>> Changed in v3 (thanks to Jan Kara)
>> - made strictlimit a bdi flag
>> - introduced "bdi_dirty <= bdi_freerun" check
>> - removed BDI_idle and BDI_WRITTEN_BACK as redundant
>> - moved foo_stamp cleanup to separate patch because it's not related
>> to strictlimit feature anymore
>> - corrected spelling.
> I have some comments below but the patch is much better! Thanks!
>
>> Signed-off-by: Maxim Patlasov <[email protected]>
>> ---
>> fs/fuse/inode.c | 2
>> include/linux/backing-dev.h | 3 +
>> mm/page-writeback.c | 190 ++++++++++++++++++++++++++++++++++++-------
>> 3 files changed, 164 insertions(+), 31 deletions(-)
>>
>> diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
>> index 9a0cdde..9aa1932 100644
>> --- a/fs/fuse/inode.c
>> +++ b/fs/fuse/inode.c
>> @@ -929,7 +929,7 @@ static int fuse_bdi_init(struct fuse_conn *fc, struct super_block *sb)
>> fc->bdi.name = "fuse";
>> fc->bdi.ra_pages = (VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
>> /* fuse does it's own writeback accounting */
>> - fc->bdi.capabilities = BDI_CAP_NO_ACCT_WB;
>> + fc->bdi.capabilities = BDI_CAP_NO_ACCT_WB | BDI_CAP_STRICTLIMIT;
>>
>> err = bdi_init(&fc->bdi);
>> if (err)
>> diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
>> index ee7eb1a..7166489 100644
>> --- a/include/linux/backing-dev.h
>> +++ b/include/linux/backing-dev.h
>> @@ -244,6 +244,8 @@ int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned int max_ratio);
>> * BDI_CAP_EXEC_MAP: Can be mapped for execution
>> *
>> * BDI_CAP_SWAP_BACKED: Count shmem/tmpfs objects as swap-backed.
>> + *
>> + * BDI_CAP_STRICTLIMIT: Keep number of dirty pages below bdi threshold.
>> */
>> #define BDI_CAP_NO_ACCT_DIRTY 0x00000001
>> #define BDI_CAP_NO_WRITEBACK 0x00000002
>> @@ -255,6 +257,7 @@ int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned int max_ratio);
>> #define BDI_CAP_NO_ACCT_WB 0x00000080
>> #define BDI_CAP_SWAP_BACKED 0x00000100
>> #define BDI_CAP_STABLE_WRITES 0x00000200
>> +#define BDI_CAP_STRICTLIMIT 0x00000400
>>
>> #define BDI_CAP_VMFLAGS \
>> (BDI_CAP_READ_MAP | BDI_CAP_WRITE_MAP | BDI_CAP_EXEC_MAP)
>> diff --git a/mm/page-writeback.c b/mm/page-writeback.c
>> index 088a8db..1f9b5e4 100644
>> --- a/mm/page-writeback.c
>> +++ b/mm/page-writeback.c
>> @@ -585,6 +585,37 @@ unsigned long bdi_dirty_limit(struct backing_dev_info *bdi, unsigned long dirty)
>> }
>>
>> /*
>> + * setpoint - dirty 3
>> + * f(dirty) := 1.0 + (----------------)
>> + * limit - setpoint
>> + *
>> + * it's a 3rd order polynomial that subjects to
>> + *
>> + * (1) f(freerun) = 2.0 => rampup dirty_ratelimit reasonably fast
>> + * (2) f(setpoint) = 1.0 => the balance point
>> + * (3) f(limit) = 0 => the hard limit
>> + * (4) df/dx <= 0 => negative feedback control
>> + * (5) the closer to setpoint, the smaller |df/dx| (and the reverse)
>> + * => fast response on large errors; small oscillation near setpoint
>> + */
>> +static inline long long pos_ratio_polynom(unsigned long setpoint,
>> + unsigned long dirty,
>> + unsigned long limit)
>> +{
>> + long long pos_ratio;
>> + long x;
>> +
>> + x = div_s64(((s64)setpoint - (s64)dirty) << RATELIMIT_CALC_SHIFT,
>> + limit - setpoint + 1);
>> + pos_ratio = x;
>> + pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
>> + pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
>> + pos_ratio += 1 << RATELIMIT_CALC_SHIFT;
>> +
>> + return pos_ratio;
>> +}
> I think you should limit return value of this function to <-2,2> range to
> save us from surprises when dirty > limit or dirty < setpoint.
OK, I'll add it to the next version of the patch.
>
>> +
>> +/*
>> * Dirty position control.
>> *
>> * (o) global/bdi setpoints
>> @@ -682,26 +713,75 @@ static unsigned long bdi_position_ratio(struct backing_dev_info *bdi,
>> /*
>> * global setpoint
>> *
>> - * setpoint - dirty 3
>> - * f(dirty) := 1.0 + (----------------)
>> - * limit - setpoint
>> + * See comment for pos_ratio_polynom().
>> + */
>> + setpoint = (freerun + limit) / 2;
>> + pos_ratio = pos_ratio_polynom(setpoint, dirty, limit);
>> +
>> + /*
>> + * The strictlimit feature is a tool preventing mistrusted filesystems
>> + * from growing a large number of dirty pages before throttling. For
>> + * such filesystems balance_dirty_pages always checks bdi counters
>> + * against bdi limits. Even if global "nr_dirty" is under "freerun".
>> + * This is especially important for fuse which sets bdi->max_ratio to
>> + * 1% by default. Without strictlimit feature, fuse writeback may
>> + * consume arbitrary amount of RAM because it is accounted in
>> + * NR_WRITEBACK_TEMP which is not involved in calculating "nr_dirty".
> I know this isn't directly related to this patch, but why isn't
> NR_WRITEBACK_TEMP accounted in nr_dirty? I presume this is due to possible
> deadlocks when you have dirty page against fuse, then to clean it, you have
> to submit it to userspace process which must be able to dirty some pages to
> actually write the page. Am I right?
Yes. Mel Gorman suggested to account it in nr_dirty for all but fuse
daemons, and this looked like the way to go. But then it turned out
that we cannot reliably discern fuse daemons among other processes.
>
> But then if we have 'strictlimit' properly implemented, NR_WRITEBACK_TEMP
> hack shouldn't be necessary anymore.
Currently, NR_WRITEBACK_TEMP is accounted by FUSE and printed out in
/proc/meminfo, but nobody in the kernel uses it. We can remove it
right now and nothing will change.
On the other hand, independently on strictlimit feature, we cannot
account all those NR_WRITEBACK_TEMP pages in ordinary NR_WRITEBACK.
Because balance_dirty_pages() is not the only place where
NR_WRITEBACK is used. Another important place is
throttle_vm_writeout(). We definitely don't want to slow down
reclaimer due to pages sit in fuse internals.
> We just need to make sure bdi_limit is
> low enough that fuse daemon doesn't hit the global dirty limit... This gets
> somewhat tricky as all fuse filesystems in the system together shouldn't be
> able to create too many dirty pages but the same problem is there with
> NR_WRITEBACK_TEMP only it would demonstrate itself by driving the machine
> OOM instead of locking up in balance_dirty_pages().
What you're suggesting is not logical. fuse daemon is the guy who is
in charge of processing fuse internal writeback (those pages which
were accounted in NR_WRITEBACK_TEMP). Hence, we should not slow down
it (fuse daemon) based on the amount of pages under fuse writeback.
That's exactly what Mel Gorman explained during LSF/MM summit. And
what you're suggesting will lead to something like "more pages under
fuse writeback ==> lesser pos_ratio ==> higher pause in
balance_dirty_pages". This is not correct when throttling fuse daemon.
> If I'm right in the above, then removing NR_WRITEBACK_TEMP would be a nice
> followup patch.
I'd rather introduce the notion of trusted fuse filesystem. If system
administrator believe given fuse fs "trusted", it works w/o
strictlimit, but fuse daemon is supposed to notify the kernel
explicitly about threads related to processing writeback. The kernel
would raise a per-task flag for those threads. And, calculating
nr_dirty in balance_dirty_pages, we'd add NR_WRITEBACK_TEMP for all,
excepting tasks with the flag set. This is very simple and will work
perfectly.
>> *
>> - * it's a 3rd order polynomial that subjects to
>> + * Here, in bdi_position_ratio(), we calculate pos_ratio based on
>> + * two values: bdi_dirty and bdi_thresh. Let's consider an example:
>> + * total amount of RAM is 16GB, bdi->max_ratio is equal to 1%, global
>> + * limits are set by default to 10% and 20% (background and throttle).
>> + * Then bdi_thresh is 1% of 20% of 16GB. This amounts to ~8K pages.
>> + * bdi_dirty_limit(bdi, bg_thresh) is about ~4K pages. bdi_setpoint is
>> + * about ~6K pages (as the average of background and throttle bdi
>> + * limits). The 3rd order polynomial will provide positive feedback if
>> + * bdi_dirty is under bdi_setpoint and vice versa.
>> *
>> - * (1) f(freerun) = 2.0 => rampup dirty_ratelimit reasonably fast
>> - * (2) f(setpoint) = 1.0 => the balance point
>> - * (3) f(limit) = 0 => the hard limit
>> - * (4) df/dx <= 0 => negative feedback control
>> - * (5) the closer to setpoint, the smaller |df/dx| (and the reverse)
>> - * => fast response on large errors; small oscillation near setpoint
>> + * Note, that we cannot use global counters in these calculations
>> + * because we want to throttle process writing to a strictlimit BDI
>> + * much earlier than global "freerun" is reached (~23MB vs. ~2.3GB
>> + * in the example above).
>> */
>> - setpoint = (freerun + limit) / 2;
>> - x = div_s64(((s64)setpoint - (s64)dirty) << RATELIMIT_CALC_SHIFT,
>> - limit - setpoint + 1);
>> - pos_ratio = x;
>> - pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
>> - pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
>> - pos_ratio += 1 << RATELIMIT_CALC_SHIFT;
>> + if (unlikely(bdi->capabilities & BDI_CAP_STRICTLIMIT)) {
>> + long long bdi_pos_ratio;
>> + unsigned long bdi_bg_thresh;
>> +
>> + if (bdi_dirty < 8)
>> + return min_t(long long, pos_ratio * 2,
>> + 2 << RATELIMIT_CALC_SHIFT);
>> +
>> + if (bdi_dirty >= bdi_thresh)
>> + return 0;
>> +
>> + bdi_bg_thresh = div_u64((u64)bdi_thresh * bg_thresh, thresh);
>> + bdi_setpoint = dirty_freerun_ceiling(bdi_thresh,
>> + bdi_bg_thresh);
>> +
>> + if (bdi_setpoint == 0 || bdi_setpoint == bdi_thresh)
>> + return 0;
>> +
>> + bdi_pos_ratio = pos_ratio_polynom(bdi_setpoint, bdi_dirty,
>> + bdi_thresh);
>> +
>> + /*
>> + * Typically, for strictlimit case, bdi_setpoint << setpoint
>> + * and pos_ratio >> bdi_pos_ratio. In the other words global
>> + * state ("dirty") is not limiting factor and we have to
>> + * make decision based on bdi counters. But there is an
>> + * important case when global pos_ratio should get precedence:
>> + * global limits are exceeded (e.g. due to activities on other
>> + * BDIs) while given strictlimit BDI is below limit.
>> + *
>> + * "pos_ratio * bdi_pos_ratio" would work for the case above,
>> + * but it would look too non-natural for the case of all
>> + * activity in the system coming from a single strictlimit BDI
>> + * with bdi->max_ratio == 100%.
>> + */
>> + pos_ratio = min(pos_ratio, bdi_pos_ratio);
> This somewhat changes the dynamics of the control system. Normally,
> pos_ratio value can be well over 3 (when globally we are at freerun and bdi
> is well below bdi setpoint). Now the maximum pos_ratio in the same
> situation is 2. Since I cannot come up with a better alternative to your
> min(), leave it there but please make a short note in the comment that we
> might want to tweak this if we observe the control system is too slow to
> adapt.
OK, I agree.
>
>> +
>> + return min_t(long long, pos_ratio, 2 << RATELIMIT_CALC_SHIFT);
>> + }
>>
>> /*
>> * We have computed basic pos_ratio above based on global situation. If
>> @@ -994,6 +1074,27 @@ static void bdi_update_dirty_ratelimit(struct backing_dev_info *bdi,
>> * keep that period small to reduce time lags).
>> */
>> step = 0;
>> +
>> + /*
>> + * For strictlimit case, calculations above were based on bdi counters
>> + * and limits (starting from pos_ratio = bdi_position_ratio() and up to
>> + * balanced_dirty_ratelimit = task_ratelimit * write_bw / dirty_rate).
>> + * Hence, to calculate "step" properly, we have to use bdi_dirty as
>> + * "dirty" and bdi_setpoint as "setpoint".
>> + *
>> + * We rampup dirty_ratelimit forcibly if bdi_dirty is low because
>> + * it's possible that bdi_thresh is close to zero due to inactivity
>> + * of backing device (see the implementation of bdi_dirty_limit()).
>> + */
>> + if (unlikely(bdi->capabilities & BDI_CAP_STRICTLIMIT)) {
>> + dirty = bdi_dirty;
>> + if (bdi_dirty < 8)
>> + setpoint = bdi_dirty + 1;
>> + else
>> + setpoint = (bdi_thresh +
>> + bdi_dirty_limit(bdi, bg_thresh)) / 2;
>> + }
>> +
> Ho, hum.... but if bdi_dirty < bdi_setpoint but globally we are above
> setpoint, resulting pos_ratio will be < 1. Then the logic below this place
> will result in step == 0 (as current dirty_ratelimit is likely to be
> greater than the new one computed now) and thus we won't change the
> ratelimit for the bdi at all. But we should reduce the ratelimit to
> ease the total pressure on the system.
Excuse me, I disagree. If globally we're above setpoint, there must be
bdi-s with bdi_dirty > bdi_setpoint. Let's reduce their ratelimits,
not ours. Because if our ratelimit is really above bdi write
bandwidth, our bdi_dirty will exceed our bdi_setpoint soon. And as for
total pressure, it will be relaxed anyway because global pos_ratio is
coming to zero very quickly when global nr_dirty is coming to global
limit close enough (due to that 3rd order polynomial). This works for
all, including tasks with bdi_dirty < bdi_setpoint. And vice versa --
if we're only slightly above global setpoint -- why should we reduce
ratelimit of someone with low bdi_dirty?
>
> So I think you need to make the condition below something like:
> if (dirty < setpoint &&
> (!(bdi->capabilities & BDI_CAP_STRICTLIMIT) ||
> bdi_dirty < bdi_setpoint))
>
>
>> if (dirty < setpoint) {
>> x = min(bdi->balanced_dirty_ratelimit,
>> min(balanced_dirty_ratelimit, task_ratelimit));
>> @@ -1198,6 +1299,21 @@ static long bdi_min_pause(struct backing_dev_info *bdi,
>> return pages >= DIRTY_POLL_THRESH ? 1 + t / 2 : t;
>> }
>>
>> +static inline bool below_freerun_ceiling(unsigned long nr,
>> + unsigned long thresh,
>> + unsigned long bg_thresh,
>> + unsigned long now)
>> +{
>> + if (nr <= dirty_freerun_ceiling(thresh, bg_thresh)) {
>> + current->dirty_paused_when = now;
>> + current->nr_dirtied = 0;
>> + current->nr_dirtied_pause = dirty_poll_interval(nr, thresh);
>> + return true;
>> + }
>> +
>> + return false;
>> +}
>> +
>> /*
>> * balance_dirty_pages() must be called by processes which are generating dirty
>> * data. It looks at the number of dirty pages in the machine and will force
>> @@ -1212,7 +1328,6 @@ static void balance_dirty_pages(struct address_space *mapping,
>> unsigned long bdi_reclaimable;
>> unsigned long nr_dirty; /* = file_dirty + writeback + unstable_nfs */
>> unsigned long bdi_dirty;
>> - unsigned long freerun;
>> unsigned long background_thresh;
>> unsigned long dirty_thresh;
>> unsigned long bdi_thresh;
>> @@ -1226,6 +1341,7 @@ static void balance_dirty_pages(struct address_space *mapping,
>> unsigned long dirty_ratelimit;
>> unsigned long pos_ratio;
>> struct backing_dev_info *bdi = mapping->backing_dev_info;
>> + bool strictlimit = bdi->capabilities & BDI_CAP_STRICTLIMIT;
>> unsigned long start_time = jiffies;
>>
>> for (;;) {
>> @@ -1248,18 +1364,10 @@ static void balance_dirty_pages(struct address_space *mapping,
>> * catch-up. This avoids (excessively) small writeouts
>> * when the bdi limits are ramping up.
>> */
>> - freerun = dirty_freerun_ceiling(dirty_thresh,
>> - background_thresh);
>> - if (nr_dirty <= freerun) {
>> - current->dirty_paused_when = now;
>> - current->nr_dirtied = 0;
>> - current->nr_dirtied_pause =
>> - dirty_poll_interval(nr_dirty, dirty_thresh);
>> + if (likely(!strictlimit) &&
>> + below_freerun_ceiling(nr_dirty, dirty_thresh,
>> + background_thresh, now))
> Hiding the 'current' update in the helper function is unexpected. I'd
> rather have the 'bdi_dirty' computation hidden in a helper function and
> perform it either before or after freerun check depending on whether we are
> in strictlimit mode or not.
OK. I'll try to do it in the next version.
Thanks,
Maxim
>
>> break;
>> - }
>> -
>> - if (unlikely(!writeback_in_progress(bdi)))
>> - bdi_start_background_writeback(bdi);
>>
>> /*
>> * bdi_thresh is not treated as some limiting factor as
>> @@ -1296,8 +1404,30 @@ static void balance_dirty_pages(struct address_space *mapping,
>> bdi_stat(bdi, BDI_WRITEBACK);
>> }
>>
>> + /*
>> + * Throttle it only when the background writeback cannot
>> + * catch-up. But this time (strictlimit case) make decision
>> + * based on the bdi counters and limits. Small writeouts when
>> + * the bdi limits are ramping up are the price we consciously
>> + * pay for strictlimit-ing.
>> + */
>> + if (unlikely(strictlimit)) {
>> + unsigned long bdi_bg_thresh;
>> +
>> + bdi_bg_thresh = div_u64((u64)bdi_thresh *
>> + background_thresh,
>> + dirty_thresh);
>> +
>> + if (below_freerun_ceiling(bdi_dirty, bdi_thresh,
>> + bdi_bg_thresh, now))
>> + break;
>> + }
>> +
>> + if (unlikely(!writeback_in_progress(bdi)))
>> + bdi_start_background_writeback(bdi);
>> +
>> dirty_exceeded = (bdi_dirty > bdi_thresh) &&
>> - (nr_dirty > dirty_thresh);
>> + ((nr_dirty > dirty_thresh) || strictlimit);
>> if (dirty_exceeded && !bdi->dirty_exceeded)
>> bdi->dirty_exceeded = 1;
>
> Honza
> --
> Jan Kara <[email protected]>
> SUSE Labs, CR
>
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to [email protected]. For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
On Thu, Jul 11, 2013 at 11:50 PM, Maxim Patlasov
<[email protected]> wrote:
> On Thu, Jul 11, 2013 at 10:51 PM, Jan Kara <[email protected]> wrote:
[snipped]
>> If I'm right in the above, then removing NR_WRITEBACK_TEMP would be a nice
>> followup patch.
>
> I'd rather introduce the notion of trusted fuse filesystem. If system
> administrator believe given fuse fs "trusted", it works w/o
> strictlimit, but fuse daemon is supposed to notify the kernel
> explicitly about threads related to processing writeback. The kernel
> would raise a per-task flag for those threads. And, calculating
> nr_dirty in balance_dirty_pages, we'd add NR_WRITEBACK_TEMP for all,
> excepting tasks with the flag set. This is very simple and will work
> perfectly.
Yes, doing a trusted mode for fuse is a good idea, I think. And it
should have a new filesystem type (can't think of a good name though,
"fusetrusted" is a bit too long).
Thanks,
Miklos