Dave, all,
Dave and I have made the 2.5.43 patch available for download. You can
find it on my page at:
http://www.user1.netcarrier.com/~kbrosius/pages/mylex.html
This patch allows me to boot 2.5.43 on a dual Athlon system with a Mylex
eXtremeRAID 2000 controller successfully.
Thanks Dave!
Kevin
>
> Hi Dave,
> I'll give it a shot tonight. Did you post the patch to the
> linux-kernel mailing list? I can't find it in the archives. If not,
> would you mail a copy to my home address (compuserve, or have you posted
> it on a web location?) If you'd like me to put up copies of the patch
> for general consumption I'll make space available on a web page.
>
> Kevin
>
> >
> > I just posted a DAC960 patch for 2.5.42. Tomorrow, I'll post
> > a 2.5.43 patch. There are some minor changes needed (about three
> > lines) for 2.5.43. See the patch posting regarding ACPI
> > interactions.
> >
> > I'd love to hear any good or bad results you have with these
> > patches.
> >
> > Thanks!
> >
> > Dave Olien
> > Open Source Developement Lab
> >
> > On Wed, Oct 16, 2002 at 07:28:07PM -0400, Kevin Brosius wrote:
> > > >
> > > > looking at that i realise that DAC960 code in 2.5.43
> > > > is not supposed to be tested:
> > > > ======
> > > > #error I am a non-portable driver, please convert me to use the \
> > > > Documentation/DMA-mapping.txt interfaces ======
> > > > am i right?
> > > >
> > > > the following weirdo appears in both gcc-3.1 and 3.2 (also in 2.5.42)
> > > > ======
> > > > drivers/block/DAC960.c: In function `DAC960_DetectControllers':
> > > > drivers/block/DAC960.c:2465: `Controller' undeclared (first use in this function)
> > > > drivers/block/DAC960.c:2465: (Each undeclared identifier is reported only once
> > > > drivers/block/DAC960.c:2465: for each function it appears in.)
> > > >
> > >
> > > Yes, 2.5.42 did this also. It looks like gcc 3.2 doesn't like goto's
> > > which reference variables outside their native scope. You can move the
> > > Controller definition to full function scope to fix that error.
> > >
> > > The DAC960 doesn't seem usable out of the stock kernel build though.
> > > You'll need to try patches previously posted to the list. (Which don't
> > > fully work for me either...)
> > >
> > > --
> > > Kevin
--
Kevin