i get the same results with Andrew Morton's 2.5.44-mm1 patch
-----Original Message-----
From: steve roemen [mailto:[email protected]]
Sent: Sunday, October 20, 2002 6:54 PM
To: 'Thomas Molina'
Cc: '[email protected]'
Subject: RE: 2.5.44 PIIX4 ide oops on boot
thanks for the tip on ide-cd, but i get a similar oops.
-steve
-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Thomas Molina
Sent: Sunday, October 20, 2002 5:59 PM
To: steve roemen
Cc: [email protected]
Subject: Re: 2.5.44 PIIX4 ide oops on boot
On Sun, 20 Oct 2002, steve roemen wrote:
>
> attached is the oops, the config, and some info on the box.
>
> ide is only used for the cdrom.
>
> it oopes during bootup. also, if i remove ide from this kernel, it'll
boot
> on the scsi drive just fine.
>
> 2.4.19 works just fine on this box.
Your config says you have ide-cd configured. Try taking just ide-cd out
and reboot. I've found a problem with 2.5.44 and ide-cd on my system
also. I have a similar oops on boot or module insertion.