I made a very little patch to avoid
people complaining that the kernel doesn't compile
properly when trying to use radio miropcm20 driver.
(I've seen some of this in french newsgroups...)
This driver always needs the ACI mixer,
so this feature should be enabled when we select
the miropcm driver.
For this, I think we have to change: (in 2.4.0 kernel)
--- Config.in-orig Sat Feb 3 21:12:16 2001
+++ Config.in Sat Feb 3 21:18:48 2001
@@ -22,7 +22,7 @@
hex ' GemTek i/o port (0x20c, 0x30c, 0x24c or 0x34c)'
CONFIG_RADIO_GEMTEK_PORT 34c
fi
dep_tristate ' Maestro on board radio' CONFIG_RADIO_MAESTRO
$CONFIG_VIDEO_DEV
-dep_tristate ' Miro PCM20 Radio' CONFIG_RADIO_MIROPCM20
$CONFIG_VIDEO_DEV
+dep_tristate ' Miro PCM20 Radio' CONFIG_RADIO_MIROPCM20
$CONFIG_VIDEO_DEV $CONFIG_SOUND_ACI_MIXER
dep_tristate ' SF16FMI Radio' CONFIG_RADIO_SF16FMI $CONFIG_VIDEO_DEV
if [ "$CONFIG_RADIO_SF16FMI" = "y" ]; then
hex ' SF16FMI I/O port (0x284 or 0x384)' CONFIG_RADIO_SF16FMI_PORT
284
With regards.
Jocelyn Mayer
Hi Jocelyn!
You wrote:
> I made a very little patch to avoid
> people complaining that the kernel doesn't compile
> properly when trying to use radio miropcm20 driver.
> (I've seen some of this in french newsgroups...)
> -dep_tristate ' Miro PCM20 Radio' CONFIG_RADIO_MIROPCM20
> $CONFIG_VIDEO_DEV
> +dep_tristate ' Miro PCM20 Radio' CONFIG_RADIO_MIROPCM20
> $CONFIG_VIDEO_DEV $CONFIG_SOUND_ACI_MIXER
This was already discussed some days ago. Arjan said, that the
miropcm20 question comes before the aci question, so this is
useless. - Arjan, this is not true for 'make menuconfig' and 'make
xconfig', isn't it?
Anyway, this solution looks somewhat cleaner to me...
But you can choose on your own: (:
As the new maintainer I'm offering the patches on
http://www.uni-karlsruhe.de/~Robert.Siemer/Private/
Jocelyn, as my patches also include bugfixes and enhancements
(especially for the miroSOUND pcm20 radio), can you recommend these to
the complaining people. - I want more testers and reports for my
patches...
Thanks,
Robert
On Sun, Feb 04, 2001 at 03:31:25AM +0100, Robert Siemer wrote:
> This was already discussed some days ago. Arjan said, that the
> miropcm20 question comes before the aci question, so this is
> useless. - Arjan, this is not true for 'make menuconfig' and 'make
> xconfig', isn't it?
make [x,menu]config are a bit smarter, but at least make menuconfig has the
annoying behavior of hiding the question for the Miro card until you
magically turn on the ACI mixer in the sound section. This confuses the hell
out of peope when they go through make menuconfig "top bottom".
Greetings,
Arjan van de Ven