Hello all,
This converts the saa7111 driver's i2c api from i2c-old --> i2c . This
one was never converted (for some reason). Please review.
Regards,
Frank
--- linux/drivers/media/video/saa7111.c.old Sat Oct 19 12:04:53 2002
+++ linux/drivers/media/video/saa7111.c Thu Oct 31 20:29:00 2002
@@ -34,7 +34,7 @@
#include <linux/videodev.h>
#include <linux/version.h>
-#include <linux/i2c-old.h>
+#include <linux/i2c.h>
#include <linux/video_decoder.h>
@@ -43,8 +43,9 @@
/* ----------------------------------------------------------------------- */
struct saa7111 {
- struct i2c_bus *bus;
+ struct i2c_client *client;
int addr;
+ struct semaphore lock;
unsigned char reg[32];
int norm;
@@ -60,74 +61,29 @@
#define I2C_DELAY 10
-/* ----------------------------------------------------------------------- */
-
-static int saa7111_write(struct saa7111 *dev, unsigned char subaddr,
- unsigned char data)
-{
- int ack;
-
- LOCK_I2C_BUS(dev->bus);
- i2c_start(dev->bus);
- i2c_sendbyte(dev->bus, dev->addr, I2C_DELAY);
- i2c_sendbyte(dev->bus, subaddr, I2C_DELAY);
- ack = i2c_sendbyte(dev->bus, data, I2C_DELAY);
- dev->reg[subaddr] = data;
- i2c_stop(dev->bus);
- UNLOCK_I2C_BUS(dev->bus);
- return ack;
-}
-
-static int saa7111_write_block(struct saa7111 *dev,
- unsigned const char *data, unsigned int len)
-{
- int ack = -1;
- unsigned subaddr;
-
- while (len > 1) {
- LOCK_I2C_BUS(dev->bus);
- i2c_start(dev->bus);
- i2c_sendbyte(dev->bus, dev->addr, I2C_DELAY);
- ack = i2c_sendbyte(dev->bus, (subaddr = *data++), I2C_DELAY);
- ack = i2c_sendbyte(dev->bus, (dev->reg[subaddr] = *data++), I2C_DELAY);
- len -= 2;
- while (len > 1 && *data == ++subaddr) {
- data++;
- ack =
- i2c_sendbyte(dev->bus,
- (dev->reg[subaddr] =
- *data++), I2C_DELAY);
- len -= 2;
- }
- i2c_stop(dev->bus);
- UNLOCK_I2C_BUS(dev->bus);
- }
- return ack;
-}
-
-static int saa7111_read(struct saa7111 *dev, unsigned char subaddr)
-{
- int data;
-
- LOCK_I2C_BUS(dev->bus);
- i2c_start(dev->bus);
- i2c_sendbyte(dev->bus, dev->addr, I2C_DELAY);
- i2c_sendbyte(dev->bus, subaddr, I2C_DELAY);
- i2c_start(dev->bus);
- i2c_sendbyte(dev->bus, dev->addr | 1, I2C_DELAY);
- data = i2c_readbyte(dev->bus, 1);
- i2c_stop(dev->bus);
- UNLOCK_I2C_BUS(dev->bus);
- return data;
-}
+static unsigned short normal_i2c[] = { 34>>1, I2C_CLIENT_END };
+static unsigned short normal_i2c_range[] = { I2C_CLIENT_END };
+static unsigned short probe[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
+static unsigned short probe_range[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
+static unsigned short ignore[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
+static unsigned short ignore_range[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
+static unsigned short force[2] = { I2C_CLIENT_END , I2C_CLIENT_END };
+
+static struct i2c_client_address_data addr_data = {
+ normal_i2c, normal_i2c_range,
+ probe, probe_range,
+ ignore, ignore_range,
+ force
+};
+static struct i2c_client client_template;
/* ----------------------------------------------------------------------- */
-static int saa7111_attach(struct i2c_device *device)
+static int saa7111_attach(struct i2c_adapter *adap, int addr, unsigned short flags, int kind)
{
int i;
struct saa7111 *decoder;
-
+ struct i2c_client *client;
static const unsigned char init[] = {
0x00, 0x00, /* 00 - ID byte */
0x01, 0x00, /* 01 - reserved */
@@ -158,20 +114,25 @@
0x16, 0x00, /* 16 - VBI */
0x17, 0x00, /* 17 - VBI */
};
+ client = kmalloc(sizeof(*client), GFP_KERNEL);
+ if(client == NULL)
+ return -ENOMEM;
+ client_template.adapter = adap;
+ client_template.addr = addr;
+ memcpy(client, &client_template, sizeof(*client));
- MOD_INC_USE_COUNT;
-
- device->data = decoder = kmalloc(sizeof(struct saa7111), GFP_KERNEL);
+ decoder = kmalloc(sizeof(*decoder), GFP_KERNEL);
if (decoder == NULL)
{
- MOD_DEC_USE_COUNT;
+ kfree(client);
return -ENOMEM;
}
- memset(decoder, 0, sizeof(struct saa7111));
- strcpy(device->name, "saa7111");
- decoder->bus = device->bus;
- decoder->addr = device->addr;
+ memset(decoder, 0, sizeof(*decoder));
+ strcpy(client->name, "saa7111");
+ decoder->client = client;
+ client->data = decoder;
+ decoder->addr = addr;
decoder->norm = VIDEO_MODE_NTSC;
decoder->input = 0;
decoder->enable = 1;
@@ -180,29 +141,38 @@
decoder->hue = 32768;
decoder->sat = 32768;
- i = saa7111_write_block(decoder, init, sizeof(init));
+ i = i2c_master_send(client, init, sizeof(init));
if (i < 0) {
printk(KERN_ERR "%s_attach: init status %d\n",
- device->name, i);
+ client->name, i);
} else {
printk(KERN_INFO "%s_attach: chip version %x\n",
- device->name, saa7111_read(decoder, 0x00) >> 4);
+ client->name, i2c_smbus_read_byte_data(client, 0x00) >> 4);
}
+ init_MUTEX(&decoder->lock);
+ i2c_attach_client(client);
+ MOD_INC_USE_COUNT;
return 0;
}
+static int saa7111_probe(struct i2c_adapter *adap)
+{
+ return i2c_probe(adap, &addr_data, saa7111_attach);
+}
-
-static int saa7111_detach(struct i2c_device *device)
+static int saa7111_detach(struct i2c_client *client)
{
- kfree(device->data);
+ struct saa7111 *decoder = client->data;
+ i2c_detach_client(client);
+ kfree(decoder);
+ kfree(client);
MOD_DEC_USE_COUNT;
return 0;
}
-static int saa7111_command(struct i2c_device *device, unsigned int cmd,
+static int saa7111_command(struct i2c_client *client, unsigned int cmd,
void *arg)
{
- struct saa7111 *decoder = device->data;
+ struct saa7111 *decoder = client->data;
switch (cmd) {
@@ -214,11 +184,11 @@
for (i = 0; i < 32; i += 16) {
int j;
- printk("KERN_DEBUG %s: %03x", device->name,
+ printk("KERN_DEBUG %s: %03x", client->name,
i);
for (j = 0; j < 16; ++j) {
printk(" %02x",
- saa7111_read(decoder,
+ i2c_smbus_read_byte_data(client,
i + j));
}
printk("\n");
@@ -246,7 +216,7 @@
int status;
int res;
- status = saa7111_read(decoder, 0x1f);
+ status = i2c_smbus_read_byte_data(client, 0x1f);
res = 0;
if ((status & (1 << 6)) == 0) {
res |= DECODER_STATUS_GOOD;
@@ -281,19 +251,19 @@
switch (*iarg) {
case VIDEO_MODE_NTSC:
- saa7111_write(decoder, 0x08,
+ i2c_smbus_write_byte_data(client, 0x08,
(decoder->
reg[0x08] & 0x3f) | 0x40);
break;
case VIDEO_MODE_PAL:
- saa7111_write(decoder, 0x08,
+ i2c_smbus_write_byte_data(client, 0x08,
(decoder->
reg[0x08] & 0x3f) | 0x00);
break;
case VIDEO_MODE_AUTO:
- saa7111_write(decoder, 0x08,
+ i2c_smbus_write_byte_data(client, 0x08,
(decoder->
reg[0x08] & 0x3f) | 0x80);
break;
@@ -317,12 +287,12 @@
if (decoder->input != *iarg) {
decoder->input = *iarg;
/* select mode */
- saa7111_write(decoder, 0x02,
+ i2c_smbus_write_byte_data(client, 0x02,
(decoder->
reg[0x02] & 0xf8) |
decoder->input);
/* bypass chrominance trap for modes 4..7 */
- saa7111_write(decoder, 0x09,
+ i2c_smbus_write_byte_data(client, 0x09,
(decoder->
reg[0x09] & 0x7f) |
((decoder->input >
@@ -357,26 +327,26 @@
// If output should be enabled, we have to reverse the above.
if (decoder->enable) {
- saa7111_write(decoder, 0x02,
+ i2c_smbus_write_byte_data(client, 0x02,
(decoder->
reg[0x02] & 0xf8) |
decoder->input);
- saa7111_write(decoder, 0x08,
+ i2c_smbus_write_byte_data(client, 0x08,
(decoder->
reg[0x08] & 0xfb));
- saa7111_write(decoder, 0x11,
+ i2c_smbus_write_byte_data(client, 0x11,
(decoder->
reg[0x11] & 0xf3) |
0x0c);
} else {
- saa7111_write(decoder, 0x02,
+ i2c_smbus_write_byte_data(client, 0x02,
(decoder->
reg[0x02] & 0xf8));
- saa7111_write(decoder, 0x08,
+ i2c_smbus_write_byte_data(client, 0x08,
(decoder->
reg[0x08] & 0xfb) |
0x04);
- saa7111_write(decoder, 0x11,
+ i2c_smbus_write_byte_data(client, 0x11,
(decoder->
reg[0x11] & 0xf3));
}
@@ -391,25 +361,25 @@
if (decoder->bright != pic->brightness) {
/* We want 0 to 255 we get 0-65535 */
decoder->bright = pic->brightness;
- saa7111_write(decoder, 0x0a,
+ i2c_smbus_write_byte_data(client, 0x0a,
decoder->bright >> 8);
}
if (decoder->contrast != pic->contrast) {
/* We want 0 to 127 we get 0-65535 */
decoder->contrast = pic->contrast;
- saa7111_write(decoder, 0x0b,
+ i2c_smbus_write_byte_data(client, 0x0b,
decoder->contrast >> 9);
}
if (decoder->sat != pic->colour) {
/* We want 0 to 127 we get 0-65535 */
decoder->sat = pic->colour;
- saa7111_write(decoder, 0x0c,
+ i2c_smbus_write_byte_data(client, 0x0c,
decoder->sat >> 9);
}
if (decoder->hue != pic->hue) {
/* We want -128 to 127 we get 0-65535 */
decoder->hue = pic->hue;
- saa7111_write(decoder, 0x0d,
+ i2c_smbus_write_byte_data(client, 0x0d,
(decoder->hue - 32768) >> 8);
}
}
@@ -426,22 +396,30 @@
static struct i2c_driver i2c_driver_saa7111 = {
"saa7111", /* name */
- I2C_DRIVERID_VIDEODECODER, /* ID */
- I2C_SAA7111, I2C_SAA7111 + 1,
-
- saa7111_attach,
+ I2C_DRIVERID_SAA7111, /* ID */
+ I2C_DF_NOTIFY,
+ saa7111_probe,
saa7111_detach,
saa7111_command
};
+static struct i2c_client client_template = {
+ "saa7111_client",
+ -1,
+ 0,
+ 0,
+ NULL,
+ &i2c_driver_saa7111
+};
+
static int saa7111_init(void)
{
- return i2c_register_driver(&i2c_driver_saa7111);
+ return i2c_add_driver(&i2c_driver_saa7111);
}
static void saa7111_exit(void)
{
- i2c_unregister_driver(&i2c_driver_saa7111);
+ i2c_del_driver(&i2c_driver_saa7111);
}
module_init(saa7111_init);
Em Thu, Oct 31, 2002 at 10:20:45PM -0500, Frank Davis escreveu:
> Hello all,
> This converts the saa7111 driver's i2c api from i2c-old --> i2c . This
> one was never converted (for some reason). Please review.
> Regards,
> Frank
>
> static struct i2c_driver i2c_driver_saa7111 = {
> "saa7111", /* name */
> - I2C_DRIVERID_VIDEODECODER, /* ID */
> - I2C_SAA7111, I2C_SAA7111 + 1,
> -
> - saa7111_attach,
> + I2C_DRIVERID_SAA7111, /* ID */
> + I2C_DF_NOTIFY,
> + saa7111_probe,
> saa7111_detach,
> saa7111_command
> };
Could you please use the named initializers in C99?
like
static struct i2c_driver i2c_driver_saa7111 = {
.name = "saa7111",
.id = I2C_DRIVERID_VIDEODECODER,
.
.
.
> +static struct i2c_client client_template = {
> + "saa7111_client",
> + -1,
> + 0,
> + 0,
> + NULL,
> + &i2c_driver_saa7111
> +};
ditto, and in this one you can kill all the 0 and the NULL, as it will
be initialized to null if you omit its initializations.
- Arnaldo