2001-02-05 12:44:20

by David Pyke

[permalink] [raw]
Subject: Problems with a Magik1 chipset board

I own a Iwill KA266 which uses the ALi M1647 northbridge and M1535D+
south. I'm getting errors on startup and thought I should see if this
is an issue with the set or kernel 2.4.1

First, during the ALI15X3 starup I get:

PCI: No IRQ known for interrupt pin A of device 00:04.0. Please try
pci=biosirq

according to /proc/pci,00:04.0 is an ALi M5229 IDE (rev 196).

Second, for agpgart I have to use try_agp_unsupported=1 which gets me

agpgart: Trying generic Ali routines for device id: 1647

according to my nvidia driver proc entry, agp is not enabled.

Is there more information I should provide?

Thanks
Dave Pyke

--
No disclaimer shall be read or observed. Any person (either corporate
or individual) making any statement shall be held civily and criminally
liable as a party to any act I may do while following the intentional,
implied or inferred (whether correctly or not) directions from said
statement. So there.


2001-02-05 12:46:50

by Alan

[permalink] [raw]
Subject: Re: Problems with a Magik1 chipset board

> Second, for agpgart I have to use try_agp_unsupported=1 which gets me
> agpgart: Trying generic Ali routines for device id: 1647

Use the 2.4.1-ac patches, those should give you AGP