(adding lkml and linux-pm and I probably should have done from the start).
On Mon, 07 Jul 2014 08:46:28 +0200 "Michael Kerrisk (man-pages)"
<[email protected]> wrote:
> Hi Neil,
>
> On 07/06/2014 11:03 AM, NeilBrown wrote:
> >
> >
> > Signed-off-by: NeilBrown <[email protected]>
> > --
> >
> > I noticed that this was missing so had a go at writing something.
>
> Thanks. I applied this, and also added the additional piece shown
> at the end of this mail.
>
> > Is there / Should there be a section 7 man page describing suspend and
> > autosuspend and wakelocks etc??
>
> Sounds like it might be useful, but I don't know for sure. On the
> assumption that it might be possible to convince you to write one,
> could you briefly list what you think should be covered in the page?
I was particularly thinking of "/sys/power/autosleep" because my change to
epoll.7 mentioned autosleep, but there was no man page to reference.
The interaction of /sys/power/wakeup_count" with suspend/resume is also worth
documenting as is the use of wake_locks via /sys/power/wake_{,un}lock (which
could also usefully be referenced by epoll(7)).
Given the number of filenames here, maybe this belongs in section 5 rather
than section 7. Similar to proc(5) we could have power(5) which
documents /sys/power ???
(OK, I can see this might be opening a can of worms - we'll be having
class(5) and bus(5) and devices(5) next... but maybe this is a good thing.
And seeing these are all part of the kernel API, maybe they should be in
section 2 with the systemcalls. Or do with need a new section of API virtual
files ....)
So I guess "ls /sys/power" is a brief list of what should be included in the
page :-)
And thanks for your improvements to my submission!
NeilBrown
>
> > Comments (of course) welcome.
> >
> > NeilBrown
> >
> >
> > diff --git a/man2/epoll_ctl.2 b/man2/epoll_ctl.2
> > index 1fbe74eeea4e..6388f19195f1 100644
> > --- a/man2/epoll_ctl.2
> > +++ b/man2/epoll_ctl.2
> > @@ -154,6 +154,26 @@ The user must call
> > with
> > .B EPOLL_CTL_MOD
> > to rearm the file descriptor with a new event mask.
> > +.TP
> > +.BR EPOLLWAKEUP " (since Linux 3.5)"
> > +If
> > +.B EPOLLONESHOT
> > +and
> > +.B EPOLLET
> > +are clear and the process has the
> > +.B CAP_BLOCK_SUSPEND
> > +.BR capability (7),
> > +ensure that the system does not enter "suspend" or
> > +"hibernate" while this event is pending or being processed.
> > +The event is considered as being "processed" from when it returned by
> > +a call to
> > +.BR epoll_wait (2)
> > +until the next call to
> > +.BR epoll_wait (2)
> > +on the same
> > +.BR epoll (7)
> > +file descriptor.
> > +.\" commit 4d7e30d98939a0340022ccd49325a3d70f7e0238
> > .SH RETURN VALUE
> > When successful,
> > .BR epoll_ctl ()
> > diff --git a/man7/epoll.7 b/man7/epoll.7
> > index a372d9727978..31b1a8c8c9ba 100644
> > --- a/man7/epoll.7
> > +++ b/man7/epoll.7
> > @@ -173,6 +173,35 @@ it is the caller's responsibility to rearm the file
> > descriptor using .BR epoll_ctl (2)
> > with
> > .BR EPOLL_CTL_MOD .
> > +.SS Interaction with autosleep
> > +If the system is in
> > +.B autosleep
> > +mode via
> > +.I /sys/power/autosleep
> > +and an event happens which wakes the device from sleep, the device
> > +driver will only keep the device awake until that event is queued. To
> > +keep the device awake until the event has been processed it is
> > +necessary to use
> > +.B epoll
> > +and the
> > +.B EPOLLWAKEUP
> > +flag.
> > +
> > +When this flag is set in the
> > +.B events
> > +field for a
> > +.I struct epoll_event
> > +then system will be kept awake from the moment the event is queued,
> > +through the
> > +.IR epoll_wait (2)
> > +call which returns the event until the subsequent
> > +.IR epoll_wait (2)
> > +call. If the event should keep the system awake beyond that time,
> > +the a separate
> > +.I wake_lock
> > +should be taken before the second
> > +.IR epoll_wait (2)
> > +call.
> > .SS /proc interfaces
> > The following interfaces can be used to limit the amount of
> > kernel memory consumed by epoll:
>
> All of the above looks good. I also added the piece sad little
> detail shown below.
>
> Cheers,
>
> Michael
>
> --- a/man2/epoll_ctl.2
> +++ b/man2/epoll_ctl.2
> @@ -174,6 +174,7 @@ until the next call to
> on the same
> .BR epoll (7)
> file descriptor.
> +See also BUGS.
> .SH RETURN VALUE
> When successful,
> .BR epoll_ctl ()
> @@ -270,6 +271,33 @@ when using
> Applications that need to be portable to kernels before 2.6.9
> should specify a non-null pointer in
> .IR event .
> +
> +If
> +.B EPOLLWAKEUP
> +is specified in
> +.IR flags ,
> +but the caller does not have the
> +.BR CAP_BLOCK_SUSPEND
> +capability, then the
> +.B EPOLLWAKEUP
> +flag is
> +.IR "silently ignored" .
> +This unfortunate behavior is necessary because no validity
> +checks were performed on the
> +.IR flags
> +argument in the original implementation, and the addition of the
> +.B EPOLLWAKEUP
> +with a check that caused the call to fail if the caller did not have the
> +.B CAP_BLOCK_SUSPEND
> +capability caused a breakage in at least one existing user-space
> +application that happened to randomly (and uselessly) specify this bit.
> +.\" commit a8159414d7e3af7233e7a5a82d1c5d85379bd75c (behavior change)
> +.\" https://lwn.net/Articles/520198/
> +A robust application should therefore double check that it has the
> +.B CAP_BLOCK_SUSPEND
> +capability if attempting to use the
> +.B EPOLLWAKEUP
> +flag.
> .SH SEE ALSO
> .BR epoll_create (2),
> .BR epoll_wait (2),
>
>
>
>
On Monday, July 07, 2014 09:01:57 PM NeilBrown wrote:
>
> --Sig_/ryAieyiS4Xod5WCxzxhl62b
> Content-Type: text/plain; charset=US-ASCII
> Content-Transfer-Encoding: quoted-printable
>
>
> (adding lkml and linux-pm and I probably should have done from the start).
First off, thanks a lot for taking care of this!
> On Mon, 07 Jul 2014 08:46:28 +0200 "Michael Kerrisk (man-pages)"
> <[email protected]> wrote:
>
> > Hi Neil,
> >=20
> > On 07/06/2014 11:03 AM, NeilBrown wrote:
> > >=20
> > >=20
> > > Signed-off-by: NeilBrown <[email protected]>
> > > --
> > >=20
> > > I noticed that this was missing so had a go at writing something.
> >=20
> > Thanks. I applied this, and also added the additional piece shown=20
> > at the end of this mail.
> >=20
> > > Is there / Should there be a section 7 man page describing suspend and
> > > autosuspend and wakelocks etc??
> >=20
> > Sounds like it might be useful, but I don't know for sure. On the=20
> > assumption that it might be possible to convince you to write one,
> > could you briefly list what you think should be covered in the page?
>
> I was particularly thinking of "/sys/power/autosleep" because my change to
> epoll.7 mentioned autosleep, but there was no man page to reference.
> The interaction of /sys/power/wakeup_count" with suspend/resume is also wor=
> th
> documenting as is the use of wake_locks via /sys/power/wake_{,un}lock (which
> could also usefully be referenced by epoll(7)).
>
> Given the number of filenames here, maybe this belongs in section 5 rather
> than section 7. Similar to proc(5) we could have power(5) which
> documents /sys/power ???
> (OK, I can see this might be opening a can of worms - we'll be having
> class(5) and bus(5) and devices(5) next... but maybe this is a good thing.
> And seeing these are all part of the kernel API, maybe they should be in
> section 2 with the systemcalls. Or do with need a new section of API virtu=
> al
> files ....)
>
> So I guess "ls /sys/power" is a brief list of what should be included in the
> page :-)
That probably is a good estimation.
Please note that there is some documentation of these things in
Documentation/ABI/testing/sysfs-power in the kernel tree that may be useful
for creating that page.
Also please let me know if I can help.
Rafael