kernel oops while writing through sbp2 to ieee1394 ide reiserfs-formated
device
i am NOT on the list, pls CC me!
trace:
kernel BUG at prints.c:334!
invalid operand: 0000
CPU: 0
EIP: 0010:[<c0174d69>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010282
eax: 00000024 ebx: c0259c00 ecx: cf51a000 edx: cf51bf64
esi: cc7f6c00 edi: ce2cb6c0 ebp: 00000003 esp: c12f1ea0
ds: 0018 es: 0018 ss: 0018
Process kupdated (pid: 7, stackpage=c12f1000)
Stack: c024e755 c02e0120 c0259c00 c12f1ec4 d0923830 00000000 c017f13d
cc7f6c00
c0259c00 00000000 00000014 ce2cb6c0 d093aaf4 c0131268 c023fa4d
cb66a000
d0923000 00000013 00000010 00000004 c0182b4b cc7f6c00 d0923830
00000001
Call Trace: [<c017f13d>] [<c0131268>] [<c023fa4d>] [<c0182b4b>]
[<c0181d40>]
[<c0181d4e>] [<c01725d5>] [<c0133eee>] [<c01334bc>] [<c013374c>]
[<c0105000>]
[<c0105000>] [<c0106ff6>] [<c0133670>]
Code: 0f 0b 4e 01 e2 0f 25 c0 85 f6 68 20 01 2e c0 74 0d 0f b7 46
>>EIP; c0174d69 <reiserfs_panic+29/60> <=====
Trace; c017f13d <flush_commit_list+2bd/3b0>
Trace; c0131268 <getblk+18/40>
Trace; c023fa4d <_mmx_memcpy+4d/150>
Trace; c0182b4b <do_journal_end+7eb/af0>
Trace; c0181d40 <flush_old_commits+130/160>
Trace; c0181d4e <flush_old_commits+13e/160>
Trace; c01725d5 <reiserfs_write_super+15/20>
Trace; c0133eee <sync_supers+be/e0>
Trace; c01334bc <sync_old_buffers+c/40>
Trace; c013374c <kupdate+dc/100>
Trace; c0105000 <_stext+0/0>
Trace; c0105000 <_stext+0/0>
Trace; c0106ff6 <kernel_thread+26/30>
Trace; c0133670 <kupdate+0/100>
Code; c0174d69 <reiserfs_panic+29/60>
00000000 <_EIP>:
Code; c0174d69 <reiserfs_panic+29/60> <=====
0: 0f 0b ud2a <=====
Code; c0174d6b <reiserfs_panic+2b/60>
2: 4e dec %esi
Code; c0174d6c <reiserfs_panic+2c/60>
3: 01 e2 add %esp,%edx
Code; c0174d6e <reiserfs_panic+2e/60>
5: 0f 25 (bad)
Code; c0174d70 <reiserfs_panic+30/60>
7: c0 85 f6 68 20 01 2e rolb $0x2e,0x12068f6(%ebp)
Code; c0174d77 <reiserfs_panic+37/60>
e: c0 (bad)
Code; c0174d78 <reiserfs_panic+38/60>
f: 74 0d je 1e <_EIP+0x1e> c0174d87
<reiserfs_panic+47/60>
Code; c0174d7a <reiserfs_panic+3a/60>
11: 0f b7 46 00 movzwl 0x0(%esi),%eax
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux blah 2.4.19 #1 Die Aug 13 10:01:16 CEST 2002 i686 unknown
Gnu C 2.96
Gnu make 3.79.1
binutils 2.11.90.0.8
util-linux 2.11f
mount 2.11g
modutils 2.4.6
e2fsprogs 1.23
reiserfsprogs 3.x.0j
isdn4k-utils 3.1pre1
Linux C Library 2.2.4
Dynamic linker (ldd) 2.2.4
Procps 2.0.7
Net-tools 1.60
Console-tools 0.3.3
Sh-utils 2.0.11
Modules Loaded sbp2 smbfs nls_iso8859-1 isofs lp
Linux version 2.4.19 (root@blah) (gcc version 2.96 20000731 (Red Hat Linux
7.1 2.96-98)) #1 Die Aug 13 10:01:16 CEST 2002
cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 3
model name : AMD Duron(tm) Processor
stepping : 1
cpu MHz : 706.989
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36
mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 1409.02
modules:
sbp2 15904 1
smbfs 32144 1 (autoclean)
nls_iso8859-1 2832 0 (autoclean)
isofs 17296 0 (autoclean)
lp 5968 0 (autoclean)
ipports:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0140-015f : aha152x
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
b000-bfff : PCI Bus #01
d800-d803 : Advanced Micro Devices [AMD] AMD-751 [Irongate] System
Controller
da00-da1f : AVM Audiovisuelles MKTG & Computer System GmbH B1 ISDN
da00-da1e : b1pci-da00
dc00-dc3f : AVM Audiovisuelles MKTG & Computer System GmbH B1 ISDN
de00-deff : Macronix, Inc. [MXIC] MX987x5
de00-deff : tulip
f000-f00f : Advanced Micro Devices [AMD] AMD-756 [Viper] IDE
f000-f007 : ide0
f008-f00f : ide1
iomem:
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-0ffeffff : System RAM
00100000-0024371c : Kernel code
0024371d-002978bf : Kernel data
0fff0000-0fff7fff : ACPI Tables
0fff8000-0fffffff : ACPI Non-volatile Storage
e6c00000-e6cfffff : PCI Bus #01
e8000000-ebffffff : Advanced Micro Devices [AMD] AMD-751 [Irongate] System
Controller
eedff000-eedfffff : Advanced Micro Devices [AMD] AMD-751 [Irongate] System
Controller
eee00000-eeefffff : PCI Bus #01
ef7e8000-ef7ebfff : Texas Instruments TSB12LV26 IEEE-1394 Controller (Link)
ef7ee000-ef7eefff : Advanced Micro Devices [AMD] AMD-756 [Viper] USB
ef7ef000-ef7ef7ff : Texas Instruments TSB12LV26 IEEE-1394 Controller (Link)
ef7ef000-ef7ef7ff : ohci1394
ef7efec0-ef7efeff : AVM Audiovisuelles MKTG & Computer System GmbH B1 ISDN
ef7eff00-ef7effff : Macronix, Inc. [MXIC] MX987x5
ef7eff00-ef7effff : tulip
ef800000-efffffff : S3 Inc. 86c764/765 [Trio32/64/64V+]
ffff0000-ffffffff : reserved
lspci -vvv:
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] System
Controller (rev 25)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 120
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at eedff000 (32-bit, prefetchable) [size=4K]
Region 2: I/O ports at d800 [disabled] [size=4]
Capabilities: [a0] AGP version 1.0
Status: RQ=15 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=x1
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] AGP
Bridge (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 120
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: eee00000-eeefffff
Prefetchable memory behind bridge: e6c00000-e6cfffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ISA (rev
01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-756 [Viper] IDE (rev
07) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at f000 [size=16]
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ACPI (rev 03)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:07.4 USB Controller: Advanced Micro Devices [AMD] AMD-756 [Viper] USB
(rev 06) (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 16 (20000ns max), cache line size 08
Interrupt: pin D routed to IRQ 12
Region 0: Memory at ef7ee000 (32-bit, non-prefetchable) [size=4K]
00:08.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH
B1 ISDN (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 500ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at ef7efec0 (32-bit, non-prefetchable) [size=64]
Region 1: I/O ports at dc00 [size=64]
Region 2: I/O ports at da00 [size=32]
00:09.0 FireWire (IEEE 1394): Texas Instruments: Unknown device 8020
(prog-if 10 [OHCI])
Subsystem: Texas Instruments: Unknown device 8010
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: Memory at ef7ef000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at ef7e8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Ethernet controller: Macronix, Inc. [MXIC] MX987x5 (rev 20)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at de00 [size=256]
Region 1: Memory at ef7eff00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at ef7d0000 [disabled] [size=64K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1+,D2-,D3hot-,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+]
(prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 12
Region 0: Memory at ef800000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at ef7f0000 [disabled] [size=64K]
have fun!
> There should be another message in your logs prior to above,
> can you please tell us what was that message?
Nov 28 09:00:12 blah kernel: reiserfs: checking transaction log (device
08:01) ...
Nov 28 09:00:15 blah kernel: reiserfs: replayed 19 transactions in 3 seconds
Nov 28 09:00:15 blah kernel: Using r5 hash to sort names
Nov 28 09:00:15 blah kernel: ReiserFS version 3.6.25
Nov 28 09:00:51 blah kernel: smb_proc_readdir_long:
name=\topconcepts.net\www\pub\doc\_php_manual_ger\http://www.php.net\SEARC~-N.PHP\*
, result=-2, rcls=1, err=2
Nov 28 09:00:51 blah kernel: smb_proc_readdir_long:
name=\topconcepts.net\www\pub\doc\_php_manual_ger\http://www.php.net\SOURC~W#.PHP\*
, result=-2, rcls=1, err=2
Nov 28 09:05:15 blah kernel: SCSI disk error : host 2 channel 0 id 1 lun 0
return code = 10000
Nov 28 09:05:15 blah kernel: I/O error: dev 08:11, sector 283064
Nov 28 09:05:15 blah kernel: SCSI disk error : host 2 channel 0 id 1 lun 0
return code = 10000
Nov 28 09:05:15 blah kernel: I/O error: dev 08:11, sector 283064
Nov 28 09:05:15 blah kernel: zam-7001: io error in reiserfs_find_entry
Nov 28 09:05:15 blah kernel: SCSI disk error : host 2 channel 0 id 1 lun 0
return code = 10000
Nov 28 09:05:15 blah kernel: I/O error: dev 08:11, sector 283064
Nov 28 09:05:15 blah kernel: vs-13050: reiserfs_update_sd: i/o failure
occurred trying to update [2 58464 0x0 SD] stat dataSCSI disk error : host 2
channel 0 id 1 lun 0 return code = 10000
Nov 28 09:05:15 blah kernel: I/O error: dev 08:11, sector 283064
Nov 28 09:05:20 blah kernel: vs-13050: reiserfs_update_sd: i/o failure
occurred trying to update [2 58464 0x0 SD] stat dataSCSI disk error : host 2
channel 0 id 1 lun 0 return code = 10000
Nov 28 09:05:20 blah kernel: I/O error: dev 08:11, sector 11496
Nov 28 09:05:20 blah kernel: SCSI disk error : host 2 channel 0 id 1 lun 0
return code = 10000
Nov 28 09:05:20 blah kernel: I/O error: dev 08:11, sector 11504
Nov 28 09:05:20 blah kernel: journal-601, buffer write failed
Nov 28 09:05:20 blah kernel: kernel BUG at prints.c:334!
Nov 28 09:05:20 blah kernel: invalid operand: 0000
Nov 28 09:05:20 blah kernel: CPU: 0
[...]
If you need more logs, just mail me.
Hello!
On Thu, Nov 28, 2002 at 09:28:47AM +0100, S?nke Ruempler wrote:
> kernel oops while writing through sbp2 to ieee1394 ide reiserfs-formated
> device
> i am NOT on the list, pls CC me!
> trace:
> kernel BUG at prints.c:334!
There should be another message in your logs prior to above,
can you please tell us what was that message?
Thank you.
Bye,
Oleg
Hello!
On Thu, Nov 28, 2002 at 09:50:55AM +0100, Sonke Ruempler wrote:
> > There should be another message in your logs prior to above,
> > can you please tell us what was that message?
> Nov 28 09:05:15 blah kernel: I/O error: dev 08:11, sector 283064
> Nov 28 09:05:15 blah kernel: zam-7001: io error in reiserfs_find_entry
> Nov 28 09:05:15 blah kernel: I/O error: dev 08:11, sector 283064
> Nov 28 09:05:15 blah kernel: vs-13050: reiserfs_update_sd: i/o failure
> occurred trying to update [2 58464 0x0 SD] stat dataSCSI disk error : host 2
> channel 0 id 1 lun 0 return code = 10000
> Nov 28 09:05:15 blah kernel: I/O error: dev 08:11, sector 283064
> Nov 28 09:05:20 blah kernel: vs-13050: reiserfs_update_sd: i/o failure
> occurred trying to update [2 58464 0x0 SD] stat dataSCSI disk error : host 2
> channel 0 id 1 lun 0 return code = 10000
> Nov 28 09:05:20 blah kernel: I/O error: dev 08:11, sector 11496
> Nov 28 09:05:20 blah kernel: SCSI disk error : host 2 channel 0 id 1 lun 0
> return code = 10000
> Nov 28 09:05:20 blah kernel: I/O error: dev 08:11, sector 11504
> Nov 28 09:05:20 blah kernel: journal-601, buffer write failed
Sorry, but you seems to have faulty hardware (bad harddrive or something).
Reiserfs cannot tolerate bad blocks in journal area right now.
I'd suggest you to make a backup of your device and then to replace bad
harddrive.
Bye,
Oleg
> Sorry, but you seems to have faulty hardware (bad harddrive or something).
> Reiserfs cannot tolerate bad blocks in journal area right now.
> I'd suggest you to make a backup of your device and then to replace bad
> harddrive.
umm, that are originally freecom 20gig ide hdds in a firewire-case, i
replaced the hdds with 120gig maxtor hdds and they worked for 2 weeks until
today.
maybe the firewire<->ide converter is corrupted?
> I do not know. Your log indicates that your scsi subsystem encountered
errors.
> But I do not know actual source of errors. May be if you enable more
verbose
> scsi errors reporting it will give you some clue. (like what command
> failed, what was the error code and this kind of stuff).
ok i will do so and mail you, if the problem comes again!
Hello!
On Thu, Nov 28, 2002 at 10:04:10AM +0100, Sonke Ruempler wrote:
> > Sorry, but you seems to have faulty hardware (bad harddrive or something).
> > Reiserfs cannot tolerate bad blocks in journal area right now.
> > I'd suggest you to make a backup of your device and then to replace bad
> > harddrive.
> umm, that are originally freecom 20gig ide hdds in a firewire-case, i
> replaced the hdds with 120gig maxtor hdds and they worked for 2 weeks until
> today.
> maybe the firewire<->ide converter is corrupted?
I do not know. Your log indicates that your scsi subsystem encountered errors.
But I do not know actual source of errors. May be if you enable more verbose
scsi errors reporting it will give you some clue. (like what command
failed, what was the error code and this kind of stuff).
Bye,
Oleg
Oleg Drokin <[email protected]> writes:
>Sorry, but you seems to have faulty hardware (bad harddrive or something).
>Reiserfs cannot tolerate bad blocks in journal area right now.
>I'd suggest you to make a backup of your device and then to replace bad
>harddrive.
You still shouldn't panic the kernel in this case. IMHO.
Regards
Henning
--
Dipl.-Inf. (Univ.) Henning P. Schmiedehausen -- Geschaeftsfuehrer
INTERMETA - Gesellschaft fuer Mehrwertdienste mbH [email protected]
Am Schwabachgrund 22 Fon.: 09131 / 50654-0 [email protected]
D-91054 Buckenhof Fax.: 09131 / 50654-20
Hello!
On Thu, Nov 28, 2002 at 09:13:43AM +0000, Henning P. Schmiedehausen wrote:
> >Sorry, but you seems to have faulty hardware (bad harddrive or something).
> >Reiserfs cannot tolerate bad blocks in journal area right now.
> >I'd suggest you to make a backup of your device and then to replace bad
> >harddrive.
> You still shouldn't panic the kernel in this case. IMHO.
Sure, panicking the kernel in case of a write error is not very nice thing to
do.
Jeff Mahoney (of SuSE) is working on improving this situation. He even
released a preview patch some time ago (on 7th May).
Bye,
Oleg
Hello
On Thu, 2004-07-01 at 10:09, Hongwei Li wrote:
> Hi:
> My machine am running linux-2.4.25, it crash in the
> reiser_panic.
> I looked at the oops and find out the followings:
> check_leaf_block_head pass the 0 as "sb" value, and
> cause reiser_panic crash.
> Any fix for this?
>
Reiserfs found metadata corruption. It is supposed to not crash but
return i/o error,
but you should reiserfsck your filesystem.
We have to improve reiserfs data corruption handling.
> static void check_leaf_block_head (struct buffer_head
> * bh)
> {
> struct block_head * blkh;
> int nr;
>
> blkh = B_BLK_HEAD (bh);
> nr = blkh_nr_item(blkh);
> if ( nr > (bh->b_size - BLKH_SIZE) / IH_SIZE)
> reiserfs_panic (0, "vs-6010:
> check_leaf_block_head: invalid item number %z", bh);
> if ( blkh_free_space(blkh) >
> bh->b_size - BLKH_SIZE - IH_SIZE * nr )
> reiserfs_panic (0, "vs-6020:
> check_leaf_block_head: invalid free space %z", bh);
>
> }
>
> void reiserfs_panic (struct super_block * sb, const
> char * fmt, ...)
> {
> show_reiserfs_locks() ;
> do_reiserfs_warning(fmt);
> printk ( KERN_EMERG "%s (device %s)\n", error_buf,
> bdevname(sb->s_dev));
> BUG ();
>
> /* this is not actually called, but makes
> reiserfs_panic() "noreturn" */
> panic ("REISERFS: panic (device %s): %s\n",
> sb ? kdevname(sb->s_dev) : "sb == 0", error_buf);
> }
>
> Li Hongwei
>
>
>
>
> __________________________________
> Do you Yahoo!?
> New and Improved Yahoo! Mail - 100MB free storage!
> http://promotions.yahoo.com/new_mail
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>