Hi Linus,
this patch fixes a bunch of wrong uses of the config language.
Remaining problems are:
- cris uses a 'hwaddr' symbol (MAC address?) that is not supported
by any interpreter
- a few symbols do not yet have the CONFIG_ prefix (also mostly cris)
- ppc does some strange stuff with define_bool and choices.
Please consisder applying for 2.4.2.
Christoph
--
Of course it doesn't work. We've performed a software upgrade.
diff -uNr linux-2.4.2-pre3/arch/cris/config.in linux/arch/cris/config.in
--- linux-2.4.2-pre3/arch/cris/config.in Sat Feb 10 20:03:13 2001
+++ linux/arch/cris/config.in Sat Feb 10 20:08:07 2001
@@ -14,21 +14,21 @@
mainmenu_option next_comment
comment 'General setup'
-bool 'Networking support' CONFIG_NET y
-bool 'System V IPC' CONFIG_SYSVIPC y
+bool 'Networking support' CONFIG_NET
+bool 'System V IPC' CONFIG_SYSVIPC
-tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF y
+tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
tristate 'Kernel support for JAVA binaries' CONFIG_BINFMT_JAVA
fi
-bool 'Use kernel gdb debugger' CONFIG_KGDB n
+bool 'Use kernel gdb debugger' CONFIG_KGDB
-bool 'Enable Etrax100 watchdog' CONFIG_ETRAX_WATCHDOG y
+bool 'Enable Etrax100 watchdog' CONFIG_ETRAX_WATCHDOG
-bool 'Use serial console (on the debug port)' CONFIG_USE_SERIAL_CONSOLE y
+bool 'Use serial console (on the debug port)' CONFIG_USE_SERIAL_CONSOLE
-bool 'Use in-kernel ifconfig/route setup' CONFIG_KERNEL_IFCONFIG n
+bool 'Use in-kernel ifconfig/route setup' CONFIG_KERNEL_IFCONFIG
endmenu
diff -uNr linux-2.4.2-pre3/arch/ia64/config.in linux/arch/ia64/config.in
--- linux-2.4.2-pre3/arch/ia64/config.in Thu Jan 4 21:50:17 2001
+++ linux/arch/ia64/config.in Sat Feb 10 20:08:53 2001
@@ -70,7 +70,7 @@
if [ "$CONFIG_ITANIUM_BSTEP_SPECIFIC" = "y" ]; then
bool ' Enable Itanium B0-step specific code' CONFIG_ITANIUM_B0_SPECIFIC
fi
- bool ' Enable SGI Medusa Simulator Support' CONFIG_IA64_SGI_SN1_SIM n
+ bool ' Enable SGI Medusa Simulator Support' CONFIG_IA64_SGI_SN1_SIM
define_bool CONFIG_DEVFS_DEBUG y
define_bool CONFIG_DEVFS_FS y
define_bool CONFIG_IA64_BRL_EMU y
@@ -79,8 +79,8 @@
define_bool CONFIG_SGI_IOC3_ETH y
define_bool CONFIG_PERCPU_IRQ y
define_int CONFIG_CACHE_LINE_SHIFT 7
- bool ' Enable DISCONTIGMEM support' CONFIG_DISCONTIGMEM y
- bool ' Enable NUMA support' CONFIG_NUMA y
+ bool ' Enable DISCONTIGMEM support' CONFIG_DISCONTIGMEM
+ bool ' Enable NUMA support' CONFIG_NUMA
fi
define_bool CONFIG_KCORE_ELF y # On IA-64, we always want an ELF /proc/kcore.
diff -uNr linux-2.4.2-pre3/arch/m68k/config.in linux/arch/m68k/config.in
--- linux-2.4.2-pre3/arch/m68k/config.in Thu Jan 4 22:00:55 2001
+++ linux/arch/m68k/config.in Sat Feb 10 20:11:25 2001
@@ -487,8 +487,10 @@
fi
fi
if [ "$CONFIG_APOLLO" = "y" ]; then
- bool 'Support for DN serial port (dummy)' CONFIG_SERIAL
+ bool 'Support for DN serial port (dummy)' CONFIG_DN_SERIAL
bool 'Support for serial port console' CONFIG_SERIAL_CONSOLE
+
+ define_tristate CONFIG_SERIAL $CONFIG_DN_SERIAL
fi
bool 'Support for user serial device modules' CONFIG_USERIAL
bool 'Watchdog Timer Support' CONFIG_WATCHDOG
diff -uNr linux-2.4.2-pre3/arch/mips/config.in linux/arch/mips/config.in
--- linux-2.4.2-pre3/arch/mips/config.in Thu Nov 16 21:51:28 2000
+++ linux/arch/mips/config.in Sat Feb 10 20:12:01 2001
@@ -329,7 +329,10 @@
# if [ "$CONFIG_ACCESSBUS" = "y" ]; then
# bool 'MAXINE Access.Bus mouse (VSXXX-BB/GB) support' CONFIG_DTOP_MOUSE
# fi
- bool 'Enhanced Real Time Clock Support' CONFIG_RTC
+ bool 'Enhanced Real Time Clock Support' CONFIG_MIPS_RTC
+
+ define_tristate CONFIG_RTC $CONFIG_MIPS_RTC
+
endmenu
fi
diff -uNr linux-2.4.2-pre3/arch/parisc/config.in linux/arch/parisc/config.in
--- linux-2.4.2-pre3/arch/parisc/config.in Tue Dec 5 21:29:39 2000
+++ linux/arch/parisc/config.in Sat Feb 10 20:09:22 2001
@@ -25,14 +25,14 @@
# bool 'GSC/Gecko bus support' CONFIG_GSC y
define_bool CONFIG_GSC y
-bool 'U2/Uturn I/O MMU' CONFIG_IOMMU_CCIO y
-bool 'LASI I/O support' CONFIG_GSC_LASI y
+bool 'U2/Uturn I/O MMU' CONFIG_IOMMU_CCIO
+bool 'LASI I/O support' CONFIG_GSC_LASI
-bool 'PCI bus support' CONFIG_PCI y
+bool 'PCI bus support' CONFIG_PCI
if [ "$CONFIG_PCI" = "y" ]; then
- bool 'GSCtoPCI/DINO PCI support' CONFIG_GSC_DINO y
- bool 'LBA/Elroy PCI support' CONFIG_PCI_LBA n
+ bool 'GSCtoPCI/DINO PCI support' CONFIG_GSC_DINO
+ bool 'LBA/Elroy PCI support' CONFIG_PCI_LBA
fi
if [ "$CONFIG_PCI_LBA" = "y" ]; then
diff -uNr linux-2.4.2-pre3/arch/sparc/config.in linux/arch/sparc/config.in
--- linux-2.4.2-pre3/arch/sparc/config.in Sat Feb 3 14:51:11 2001
+++ linux/arch/sparc/config.in Sat Feb 10 20:09:50 2001
@@ -183,8 +183,8 @@
mainmenu_option next_comment
comment 'SCSI low-level drivers'
- tristate 'Sparc ESP Scsi Driver' CONFIG_SCSI_SUNESP $CONFIG_SCSI
- tristate 'PTI Qlogic,ISP Driver' CONFIG_SCSI_QLOGICPTI $CONFIG_SCSI
+ dep_tristate 'Sparc ESP Scsi Driver' CONFIG_SCSI_SUNESP $CONFIG_SCSI
+ dep_tristate 'PTI Qlogic,ISP Driver' CONFIG_SCSI_QLOGICPTI $CONFIG_SCSI
endmenu
fi
endmenu
diff -uNr linux-2.4.2-pre3/arch/sparc64/config.in linux/arch/sparc64/config.in
--- linux-2.4.2-pre3/arch/sparc64/config.in Sat Feb 3 14:51:11 2001
+++ linux/arch/sparc64/config.in Sat Feb 10 20:10:26 2001
@@ -161,15 +161,15 @@
mainmenu_option next_comment
comment 'SCSI low-level drivers'
- tristate 'Sparc ESP Scsi Driver' CONFIG_SCSI_SUNESP $CONFIG_SCSI
- tristate 'PTI Qlogic, ISP Driver' CONFIG_SCSI_QLOGICPTI $CONFIG_SCSI
+ dep_tristate 'Sparc ESP Scsi Driver' CONFIG_SCSI_SUNESP $CONFIG_SCSI
+ dep_tristate 'PTI Qlogic, ISP Driver' CONFIG_SCSI_QLOGICPTI $CONFIG_SCSI
if [ "$CONFIG_PCI" != "n" ]; then
dep_tristate 'Adaptec AIC7xxx support' CONFIG_SCSI_AIC7XXX $CONFIG_SCSI
if [ "$CONFIG_SCSI_AIC7XXX" != "n" ]; then
bool ' Enable tagged command queueing (TCQ) by default' CONFIG_AIC7XXX_TAGGED_QUEUEING
int ' Maximum number of TCQ commands per device' CONFIG_AIC7XXX_CMDS_PER_DEVICE 8
- bool ' Collect statistics to report in /proc' CONFIG_AIC7XXX_PROC_STATS N
+ bool ' Collect statistics to report in /proc' CONFIG_AIC7XXX_PROC_STATS
int ' Delay in seconds after SCSI bus reset' CONFIG_AIC7XXX_RESET_DELAY 5
fi
dep_tristate 'NCR53C8XX SCSI support' CONFIG_SCSI_NCR53C8XX $CONFIG_SCSI
diff -uNr linux-2.4.2-pre3/drivers/atm/Config.in linux/drivers/atm/Config.in
--- linux-2.4.2-pre3/drivers/atm/Config.in Fri Dec 29 23:35:47 2000
+++ linux/drivers/atm/Config.in Sat Feb 10 20:06:10 2001
@@ -56,7 +56,7 @@
tristate 'FORE Systems 200E-series' CONFIG_ATM_FORE200E_MAYBE
if [ "$CONFIG_ATM_FORE200E_MAYBE" != "n" ]; then
if [ "$CONFIG_PCI" = "y" ]; then
- bool ' PCA-200E support' CONFIG_ATM_FORE200E_PCA y
+ bool ' PCA-200E support' CONFIG_ATM_FORE200E_PCA
if [ "$CONFIG_ATM_FORE200E_PCA" = "y" ]; then
bool ' Use default PCA-200E firmware (normally enabled)' CONFIG_ATM_FORE200E_PCA_DEFAULT_FW
if [ "$CONFIG_ATM_FORE200E_PCA_DEFAULT_FW" = "n" ]; then
@@ -65,7 +65,7 @@
fi
fi
if [ "$CONFIG_SBUS" = "y" ]; then
- bool ' SBA-200E support' CONFIG_ATM_FORE200E_SBA y
+ bool ' SBA-200E support' CONFIG_ATM_FORE200E_SBA
if [ "$CONFIG_ATM_FORE200E_SBA" = "y" ]; then
bool ' Use default SBA-200E firmware (normally enabled)' CONFIG_ATM_FORE200E_SBA_DEFAULT_FW
if [ "$CONFIG_ATM_FORE200E_SBA_DEFAULT_FW" = "n" ]; then
diff -uNr linux-2.4.2-pre3/drivers/char/Config.in linux/drivers/char/Config.in
--- linux-2.4.2-pre3/drivers/char/Config.in Fri Dec 29 23:07:21 2000
+++ linux/drivers/char/Config.in Sat Feb 10 20:06:21 2001
@@ -176,7 +176,7 @@
fi
endmenu
-tristate '/dev/agpgart (AGP Support)' CONFIG_AGP $CONFIG_DRM_AGP
+dep_tristate '/dev/agpgart (AGP Support)' CONFIG_AGP $CONFIG_DRM_AGP
if [ "$CONFIG_AGP" != "n" ]; then
bool ' Intel 440LX/BX/GX and I815/I840/I850 support' CONFIG_AGP_INTEL
bool ' Intel I810/I815 (on-board) support' CONFIG_AGP_I810
diff -uNr linux-2.4.2-pre3/drivers/media/video/Config.in linux/drivers/media/video/Config.in
--- linux-2.4.2-pre3/drivers/media/video/Config.in Wed Aug 23 23:59:55 2000
+++ linux/drivers/media/video/Config.in Sat Feb 10 20:06:41 2001
@@ -23,7 +23,7 @@
fi
dep_tristate ' CPiA Video For Linux' CONFIG_VIDEO_CPIA $CONFIG_VIDEO_DEV
if [ "$CONFIG_VIDEO_CPIA" != "n" ]; then
- if [ "CONFIG_PARPORT_1284" != "n" ]; then
+ if [ "$CONFIG_PARPORT_1284" != "n" ]; then
dep_tristate ' CPiA Parallel Port Lowlevel Support' CONFIG_VIDEO_CPIA_PP $CONFIG_VIDEO_CPIA $CONFIG_PARPORT
fi
if [ "$CONFIG_USB" != "n" ]; then
diff -uNr linux-2.4.2-pre3/drivers/usb/serial/Config.in linux/drivers/usb/serial/Config.in
--- linux-2.4.2-pre3/drivers/usb/serial/Config.in Sat Feb 3 14:51:13 2001
+++ linux/drivers/usb/serial/Config.in Sat Feb 10 20:06:58 2001
@@ -4,7 +4,7 @@
mainmenu_option next_comment
comment 'USB Serial Converter support'
-tristate 'USB Serial Converter support' CONFIG_USB_SERIAL $CONFIG_USB
+dep_tristate 'USB Serial Converter support' CONFIG_USB_SERIAL $CONFIG_USB
if [ "$CONFIG_USB_SERIAL" != "n" ]; then
bool ' USB Serial Converter verbose debug' CONFIG_USB_SERIAL_DEBUG
bool ' USB Generic Serial Driver' CONFIG_USB_SERIAL_GENERIC