Remove the function ti_bandgap_write_thot() that is not used anywhere.
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <[email protected]>
---
drivers/thermal/ti-soc-thermal/ti-bandgap.c | 13 -------------
drivers/thermal/ti-soc-thermal/ti-bandgap.h | 1 -
2 files changed, 14 deletions(-)
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index 634b6ce..cbb6a5f 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -611,19 +611,6 @@ int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot)
}
/**
- * ti_bandgap_write_thot() - sets sensor current thot
- * @bgp: pointer to bandgap instance
- * @id: sensor id
- * @val: desired thot value
- *
- * Return: 0 on success or the proper error code
- */
-int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val)
-{
- return _ti_bandgap_write_threshold(bgp, id, val, true);
-}
-
-/**
* ti_bandgap_read_tcold() - reads sensor current tcold
* @bgp: pointer to bandgap instance
* @id: sensor id
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
index b3adf72..976afc0 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.h
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
@@ -371,7 +371,6 @@ struct ti_bandgap_data {
};
int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot);
-int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val);
int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold);
int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val);
int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id,
--
1.7.10.4
On 12/21/2014 11:43 AM, Rickard Strandqvist wrote:
> Remove the function ti_bandgap_write_thot() that is not used anywhere.
>
> This was partially found by using a static code analysis program called cppcheck.
>
> Signed-off-by: Rickard Strandqvist <[email protected]>
> ---
> drivers/thermal/ti-soc-thermal/ti-bandgap.c | 13 -------------
> drivers/thermal/ti-soc-thermal/ti-bandgap.h | 1 -
> 2 files changed, 14 deletions(-)
>
> diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> index 634b6ce..cbb6a5f 100644
> --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> @@ -611,19 +611,6 @@ int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot)
> }
>
> /**
> - * ti_bandgap_write_thot() - sets sensor current thot
> - * @bgp: pointer to bandgap instance
> - * @id: sensor id
> - * @val: desired thot value
> - *
> - * Return: 0 on success or the proper error code
> - */
> -int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val)
> -{
> - return _ti_bandgap_write_threshold(bgp, id, val, true);
> -}
> -
> -/**
> * ti_bandgap_read_tcold() - reads sensor current tcold
> * @bgp: pointer to bandgap instance
> * @id: sensor id
> diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
> index b3adf72..976afc0 100644
> --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.h
> +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
> @@ -371,7 +371,6 @@ struct ti_bandgap_data {
> };
>
> int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot);
> -int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val);
> int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold);
> int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val);
> int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id,
>
Not sure if removing support for programming of hot threshold is a
good idea. how about ti_bandgap_write_tcold then?
--
Regards,
Nishanth Menon