As DMA framework request DMA using direction only in prep_slave
function, (The At91 xdma driver has adapted to this request).
So won't check direction when do DMA configuration.
Signed-off-by: Bo Shen <[email protected]>
---
sound/soc/atmel/atmel-pcm-dma.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/sound/soc/atmel/atmel-pcm-dma.c b/sound/soc/atmel/atmel-pcm-dma.c
index 33fb3bb..b8e7bad 100644
--- a/sound/soc/atmel/atmel-pcm-dma.c
+++ b/sound/soc/atmel/atmel-pcm-dma.c
@@ -105,13 +105,11 @@ static int atmel_pcm_configure_dma(struct snd_pcm_substream *substream,
return ret;
}
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- slave_config->dst_addr = ssc->phybase + SSC_THR;
- slave_config->dst_maxburst = 1;
- } else {
- slave_config->src_addr = ssc->phybase + SSC_RHR;
- slave_config->src_maxburst = 1;
- }
+ slave_config->dst_addr = ssc->phybase + SSC_THR;
+ slave_config->dst_maxburst = 1;
+
+ slave_config->src_addr = ssc->phybase + SSC_RHR;
+ slave_config->src_maxburst = 1;
prtd->dma_intr_handler = atmel_pcm_dma_irq;
--
2.3.0.rc0
On Mon, Feb 02, 2015 at 02:44:46PM +0800, Bo Shen wrote:
> As DMA framework request DMA using direction only in prep_slave
> function, (The At91 xdma driver has adapted to this request).
> So won't check direction when do DMA configuration.
Applied, thanks.