This patchset adds a DTS file to enable the BCM58305 Wireless Audio reference
design based on Cygnus. It will be kept up to date as Cygnus drivers are
accepted into the mainline.
Jonathan Richardson (1):
ARM: dts: Enable Broadcom Cygnus BCM958305K
arch/arm/boot/dts/Makefile | 3 ++-
arch/arm/boot/dts/bcm958305k.dts | 53 ++++++++++++++++++++++++++++++++++++++
2 files changed, 55 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/bcm958305k.dts
--
1.7.9.5
DT file to enable the Wireless Audio reference design based on the
BCM58305.
Reviewed-by: Ray Jui <[email protected]>
Reviewed-by: Scott Branden <[email protected]>
Tested-by: Scott Branden <[email protected]>
Signed-off-by: Jonathan Richardson <[email protected]>
---
arch/arm/boot/dts/Makefile | 3 ++-
arch/arm/boot/dts/bcm958305k.dts | 53 ++++++++++++++++++++++++++++++++++++++
2 files changed, 55 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/bcm958305k.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 91bd5bd..24b6084 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -64,7 +64,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
dtb-$(CONFIG_ARCH_BCM_CYGNUS) += bcm911360_entphn.dtb \
bcm911360k.dtb \
- bcm958300k.dtb
+ bcm958300k.dtb \
+ bcm958305k.dtb
dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
bcm21664-garnet.dtb
dtb-$(CONFIG_ARCH_BERLIN) += \
diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts
new file mode 100644
index 0000000..56b429a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958305k.dts
@@ -0,0 +1,53 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+
+/ {
+ model = "Cygnus Wireless Audio (BCM958305K)";
+ compatible = "brcm,bcm58305", "brcm,cygnus";
+
+ aliases {
+ serial0 = &uart3;
+ };
+
+ chosen {
+ stdout-path = &uart3;
+ bootargs = "console=ttyS0,115200";
+ };
+
+ uart3: serial@18023000 {
+ status = "okay";
+ };
+};
--
1.7.9.5