2001-02-15 19:51:12

by root

Subject: patch for mini-pci ethernet card

Hi,

I have a HP Pavilon 5290 laptop. It has a a mini-pci modem/ethernet combo
integrated card.

Searching in the Internet I found a patch for the ethernet to work with the
tulip driver for kernel 2.2.x series, However, I found no patch for the 2.4.x
kernel series, so I made one.

Here is what /proc/pci detects as the ethernet card.

Bus 0, device 16, function 0:
Ethernet controller: PCI device 1113:1216 (Accton Technology Corporation)
(rev 17).
IRQ 11.
Master Capable. Latency=64. Min Gnt=255.Max Lat=255.
I/O at 0x1c00 [0x1cff].
Non-prefetchable 32 bit memory at 0xe8000000 [0xe80003ff].

This patch merely adds the configuration for that card in the tulip driver
tables.
I made this patch against kernel 2.4.1 and it works fine on my laptop.

Apply this patch against linux/drivers/net/tulip/tulip_core.c

Anyone with a similar laptop please test it and see if it works for you

My name is Paul Pacheco, email: [email protected]

So, Here is the patch:


--- tulip_core.c.orig Fri Feb 16 14:30:38 2001
+++ tulip_core.c Fri Feb 16 14:47:54 2001
@@ -150,6 +150,9 @@
{ "Davicom DM9102/DM9102A", 128, 0x0001ebef,
HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI,
tulip_timer },
+ { "EN2242 tulip work-alike", 128, 0x0801fbff,
+ HAS_MII | HAS_MEDIA_TABLE | ALWAYS_CHECK_MII | HAS_ACPI | HAS_NWAY,
+ t21142_timer },
{0},
};

@@ -177,6 +180,7 @@
{ 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X },
{ 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X },
{ 0x1113, 0x1217, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98715 },
+ { 0x1113, 0x1216, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
{0, }
};
MODULE_DEVICE_TABLE(pci, tulip_pci_tbl);

2001-03-01 01:37:56

by Jeff Garzik

Subject: Re: patch for mini-pci ethernet card

root wrote:
> I have a HP Pavilon 5290 laptop. It has a a mini-pci modem/ethernet combo
> integrated card.
>
> Searching in the Internet I found a patch for the ethernet to work with the
> tulip driver for kernel 2.2.x series, However, I found no patch for the 2.4.x
> kernel series, so I made one.
>
> Here is what /proc/pci detects as the ethernet card.
>
> Bus 0, device 16, function 0:
> Ethernet controller: PCI device 1113:1216 (Accton Technology Corporation)
> (rev 17).
> IRQ 11.
> Master Capable. Latency=64. Min Gnt=255.Max Lat=255.
> I/O at 0x1c00 [0x1cff].
> Non-prefetchable 32 bit memory at 0xe8000000 [0xe80003ff].

I didn't use your patch, but this support should now be in the latest
test driver, in Alan Cox's "ac" series of patches.

--
Jeff Garzik | "You see, in this world there's two kinds of
Building 1024 | people, my friend: Those with loaded guns
MandrakeSoft | and those who dig. You dig." --Blondie