This fixes:
immediatly -> immediately
Fixes 23 occurrences in all.
diff -ur a/arch/alpha/boot/tools/objstrip.c b/arch/alpha/boot/tools/objstrip.c
--- a/arch/alpha/boot/tools/objstrip.c Mon Feb 24 11:06:03 2003
+++ b/arch/alpha/boot/tools/objstrip.c Tue Feb 25 18:27:09 2003
@@ -7,7 +7,7 @@
*/
/*
* Converts an ECOFF or ELF object file into a bootable file. The
- * object file must be a OMAGIC file (i.e., data and bss follow immediatly
+ * object file must be a OMAGIC file (i.e., data and bss follow immediately
* behind the text). See DEC "Assembly Language Programmer's Guide"
* documentation for details. The SRM boot process is documented in
* the Alpha AXP Architecture Reference Manual, Second Edition by
diff -ur a/arch/cris/drivers/serial.c b/arch/cris/drivers/serial.c
--- a/arch/cris/drivers/serial.c Mon Feb 24 11:05:36 2003
+++ b/arch/cris/drivers/serial.c Tue Feb 25 18:27:11 2003
@@ -1766,7 +1766,7 @@
B= Break character (0x00) with framing error.
E= Error byte with parity error received after B characters.
-F= "Faked" valid byte received immediatly after B characters.
+F= "Faked" valid byte received immediately after B characters.
V= Valid byte
1.
diff -ur a/arch/m68k/math-emu/fp_util.S b/arch/m68k/math-emu/fp_util.S
--- a/arch/m68k/math-emu/fp_util.S Mon Feb 24 11:06:01 2003
+++ b/arch/m68k/math-emu/fp_util.S Tue Feb 25 18:27:13 2003
@@ -49,7 +49,7 @@
* is currently at that time unused, be careful if you want change
* something here. %d0 and %d1 is always usable, sometimes %d2 (or
* only the lower half) most function have to return the %a0
- * unmodified, so that the caller can immediatly reuse it.
+ * unmodified, so that the caller can immediately reuse it.
*/
.globl fp_ill, fp_end
diff -ur a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S
--- a/arch/ppc64/kernel/head.S Mon Feb 24 11:05:32 2003
+++ b/arch/ppc64/kernel/head.S Tue Feb 25 18:27:16 2003
@@ -109,7 +109,7 @@
.llong 0x0
/* Secondary processors write this value with their cpu # */
- /* after they enter the spin loop immediatly below. */
+ /* after they enter the spin loop immediately below. */
.globl __secondary_hold_acknowledge
__secondary_hold_acknowledge:
.llong 0x0
diff -ur a/drivers/acorn/block/fd1772.c b/drivers/acorn/block/fd1772.c
--- a/drivers/acorn/block/fd1772.c Mon Feb 24 11:05:15 2003
+++ b/drivers/acorn/block/fd1772.c Tue Feb 25 18:27:18 2003
@@ -1081,7 +1081,7 @@
MotorOn = 1;
START_TIMEOUT();
/* we must wait for the IRQ here, because the ST-DMA is
- * released immediatly afterwards and the interrupt may be
+ * released immediately afterwards and the interrupt may be
* delivered to the wrong driver.
*/
}
diff -ur a/drivers/acorn/block/mfmhd.c b/drivers/acorn/block/mfmhd.c
--- a/drivers/acorn/block/mfmhd.c Mon Feb 24 11:05:12 2003
+++ b/drivers/acorn/block/mfmhd.c Tue Feb 25 18:27:22 2003
@@ -406,7 +406,7 @@
outw(command, MFM_COMMAND);
status = inw(MFM_STATUS);
- DBG("issue_command: status immediatly after command issue: %02X:\n ", status >> 8);
+ DBG("issue_command: status immediately after command issue: %02X:\n ", status >> 8);
}
static void wait_for_completion(void)
diff -ur a/drivers/char/scc.h b/drivers/char/scc.h
--- a/drivers/char/scc.h Mon Feb 24 11:05:40 2003
+++ b/drivers/char/scc.h Tue Feb 25 18:27:24 2003
@@ -428,7 +428,7 @@
* for that purpose. They assume that a local variable 'port' is
* declared and pointing to the port's scc_struct entry. The
* variants with "_NB" appended should be used if no other SCC
- * accesses follow immediatly (within 0.5 usecs). They just skip the
+ * accesses follow immediately (within 0.5 usecs). They just skip the
* final delay nops.
*
* Please note that accesses to SCC registers should only take place
diff -ur a/drivers/isdn/tpam/tpam_commands.c b/drivers/isdn/tpam/tpam_commands.c
--- a/drivers/isdn/tpam/tpam_commands.c Mon Feb 24 11:05:09 2003
+++ b/drivers/isdn/tpam/tpam_commands.c Tue Feb 25 18:27:26 2003
@@ -880,7 +880,7 @@
memcpy(skb_put(result, len), data, len);
}
- /* In loop mode, resend the data immediatly */
+ /* In loop mode, resend the data immediately */
if (card->loopmode) {
struct sk_buff *loopskb;
diff -ur a/drivers/media/video/zr36067.c b/drivers/media/video/zr36067.c
--- a/drivers/media/video/zr36067.c Mon Feb 24 11:06:01 2003
+++ b/drivers/media/video/zr36067.c Tue Feb 25 18:27:30 2003
@@ -3629,7 +3629,7 @@
("%s: ioctl VIDIOCCAPTURE: %d\n", zr->name,
v));
- /* If there is nothing to do, return immediatly */
+ /* If there is nothing to do, return immediately */
if ((v && zr->v4l_overlay_active)
|| (!v && !zr->v4l_overlay_active))
@@ -4048,7 +4048,7 @@
zr->params = bp;
- /* Make changes of input and norm go into effect immediatly */
+ /* Make changes of input and norm go into effect immediately */
/* We switch overlay off and on since a change in the norm
needs different VFE settings */
diff -ur a/drivers/net/skfp/hwt.c b/drivers/net/skfp/hwt.c
--- a/drivers/net/skfp/hwt.c Mon Feb 24 11:05:07 2003
+++ b/drivers/net/skfp/hwt.c Tue Feb 25 18:27:32 2003
@@ -264,7 +264,7 @@
* para start start time
* duration time to wait
*
- * NOTE: The fuction will return immediatly, if the timer is not
+ * NOTE: The fuction will return immediately, if the timer is not
* started
************************/
void hwt_wait_time(smc,start,duration)
diff -ur a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
--- a/drivers/net/wan/lmc/lmc_main.c Mon Feb 24 11:05:15 2003
+++ b/drivers/net/wan/lmc/lmc_main.c Tue Feb 25 18:27:34 2003
@@ -1024,7 +1024,7 @@
}
-/* This is the entry point. This is what is called immediatly. */
+/* This is the entry point. This is what is called immediately. */
/* This goes out and finds the card */
int lmc_probe_fake(struct net_device *dev) /*fold00*/
diff -ur a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c
--- a/drivers/s390/block/dasd_diag.c Mon Feb 24 11:05:05 2003
+++ b/drivers/s390/block/dasd_diag.c Tue Feb 25 18:27:40 2003
@@ -467,7 +467,7 @@
* the diag_bio_t for each block has 16 bytes.
* That makes:
* (8192 - 96 - 8) / 16 = 505.5 blocks at maximum.
- * We want to fit two into the available memory so that we can immediatly
+ * We want to fit two into the available memory so that we can immediately
* start the next request if one finishes off. That makes 252.75 blocks
* for one request. Give a little safety and the result is 240.
*/
diff -ur a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
--- a/drivers/s390/block/dasd_eckd.c Mon Feb 24 11:05:04 2003
+++ b/drivers/s390/block/dasd_eckd.c Tue Feb 25 18:27:44 2003
@@ -1427,7 +1427,7 @@
* addition we have one define extent ccw + 16 bytes of data and one
* locate record ccw + 16 bytes of data. That makes:
* (8192 - 24 - 136 - 8 - 16 - 8 - 16) / 16 = 499 blocks at maximum.
- * We want to fit two into the available memory so that we can immediatly
+ * We want to fit two into the available memory so that we can immediately
* start the next request if one finishes off. That makes 249.5 blocks
* for one request. Give a little safety and the result is 240.
*/
diff -ur a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c
--- a/drivers/s390/block/dasd_fba.c Mon Feb 24 11:05:36 2003
+++ b/drivers/s390/block/dasd_fba.c Tue Feb 25 18:27:47 2003
@@ -389,7 +389,7 @@
* locate record ccw for each block (stupid devices!) + 16 bytes of data.
* That makes:
* (8192 - 24 - 136 - 8 - 16) / 40 = 200.2 blocks at maximum.
- * We want to fit two into the available memory so that we can immediatly
+ * We want to fit two into the available memory so that we can immediately
* start the next request if one finishes off. That makes 100.1 blocks
* for one request. Give a little safety and the result is 96.
*/
diff -ur a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
--- a/drivers/s390/char/con3215.c Mon Feb 24 11:05:37 2003
+++ b/drivers/s390/char/con3215.c Tue Feb 25 18:27:52 2003
@@ -312,10 +312,10 @@
}
/*
- * Function to conditionally start an IO. A read is started immediatly,
- * a write is only started immediatly if the flush flag is on or the
+ * Function to conditionally start an IO. A read is started immediately,
+ * a write is only started immediately if the flush flag is on or the
* amount of data is bigger than RAW3215_MIN_WRITE. If a write is not
- * done immediatly a timer is started with a delay of RAW3215_TIMEOUT.
+ * done immediately a timer is started with a delay of RAW3215_TIMEOUT.
*/
static inline void
raw3215_try_io(struct raw3215_info *raw)
diff -ur a/drivers/s390/char/sclp_rw.c b/drivers/s390/char/sclp_rw.c
--- a/drivers/s390/char/sclp_rw.c Mon Feb 24 11:05:31 2003
+++ b/drivers/s390/char/sclp_rw.c Tue Feb 25 18:27:54 2003
@@ -192,7 +192,7 @@
* under VM (Why does VM interpret \n but the native machine doesn't ?)
*
* Depending on i/o-control setting the message is always written
- * immediatly or we wait for a final new line maybe coming with the
+ * immediately or we wait for a final new line maybe coming with the
* next message. Besides we avoid a buffer overrun by writing its
* content.
*
diff -ur a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
--- a/drivers/s390/cio/device_fsm.c Mon Feb 24 11:05:32 2003
+++ b/drivers/s390/cio/device_fsm.c Tue Feb 25 18:27:58 2003
@@ -288,7 +288,7 @@
}
/* Is Set Path Group supported? */
if (!cdev->private->flags.pgid_supp) {
- /* No, set state online immediatly. */
+ /* No, set state online immediately. */
ccw_device_done(cdev, DEV_STATE_ONLINE);
return 0;
}
@@ -333,7 +333,7 @@
return -EBUSY;
/* Is Set Path Group supported? */
if (!cdev->private->flags.pgid_supp) {
- /* No, set state offline immediatly. */
+ /* No, set state offline immediately. */
ccw_device_done(cdev, DEV_STATE_OFFLINE);
return 0;
}
diff -ur a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
--- a/drivers/s390/net/lcs.c Mon Feb 24 11:05:09 2003
+++ b/drivers/s390/net/lcs.c Tue Feb 25 18:28:02 2003
@@ -1206,7 +1206,7 @@
card->stats.tx_packets++;
dev_kfree_skb(skb);
if (card->tx_emitted <= 0)
- /* If this is the first tx buffer emit it immediatly. */
+ /* If this is the first tx buffer emit it immediately. */
__lcs_emit_txbuffer(card);
return 0;
}
diff -ur a/include/linux/n_r3964.h b/include/linux/n_r3964.h
--- a/include/linux/n_r3964.h Mon Feb 24 11:05:39 2003
+++ b/include/linux/n_r3964.h Tue Feb 25 18:28:05 2003
@@ -165,7 +165,7 @@
{
unsigned int length; /* length in chars without header */
unsigned char *data; /* usually data is located
- immediatly behind this struct */
+ immediately behind this struct */
unsigned int locks; /* only used in rx_buffer */
struct r3964_block_header *next;