2001-02-19 18:29:30

by Ionut Dumitrache

[permalink] [raw]
Subject: support for i815 audio ?


Should this onboard audio work with the i810 driver, in 2.2.x
and 2.4.x ?
The card is detected as ICH2, although the driver supports only ICH.

----
Intel 810 + AC97 Audio, version 0.17, 17:24:05 Feb 17 2001
PCI: Increasing latency timer of device 00:fd to 64
i810: Intel ICH2 found at IO 0xef00 and 0xe800, IRQ 9
ac97_codec: AC97 Audio codec, vendor id1: 0x4144, id2: 0x5360 (Analog
Devices AD1885)
i810_audio: Codec refused to allow VRA, using 48Khz only.
i810_audio: Found 1 audio device(s).
----

As seen above, playback is supported only for 48khz samples.

If this is supposed to happen, is there a plan to support this
version as well ?

P.S. Please cc-me, i'm not subscribed to this list.


2001-02-19 18:51:58

by Alan

[permalink] [raw]
Subject: Re: support for i815 audio ?

> ac97_codec: AC97 Audio codec, vendor id1: 0x4144, id2: 0x5360 (Analog
> Devices AD1885)
> i810_audio: Codec refused to allow VRA, using 48Khz only.
> i810_audio: Found 1 audio device(s).
>
> As seen above, playback is supported only for 48khz samples.

If the codec only supports 48Khz samples then so be it. We support that but
its up to the applications to honour the errors they get setting other
speeds.