This series contains the CPUfreq driver for Broadcom SoCs that use "AVS
Firmware" for voltage and frequency scaling. All voltage and frequency
transitions are performed by the firmware and are therefore hidden from
Linux.
The driver provides a standard CPUfreq interface to other kernel
components and to userland on the one hand and communicates with the
AVS co-processor on the other.
Communication between the two processors is via shared mailbox
registers and interrupts (ARM -> AVS to tell the firmware that there is
a command to process and AVS -> ARM to tell the driver that a command
finished executing).
lkml.org seems to be down for me. Here are patchwork links to the original
series:
https://patchwork.kernel.org/patch/9278119/
https://patchwork.kernel.org/patch/9278121/
https://patchwork.kernel.org/patch/9278127/
Changes from v1:
- renamed binding document
- rewrote the introduction of the binding document
- created a new driver documentation file that contains Linux specific
information that was previously part of the binding document
- renamed the driver (and related config options) to include a reference
to "STB", since this implementation is primarily intended for use on
set-top boxes
- improved comments
- updated function __map_region()
- updated struct private_data
- added code to unmap memory regions in the error and exit paths
- added new sysfs property to report frequency directly from the
co-processor register
Markus Mayer (3):
dt: cpufreq: brcm: New binding document for brcmstb-avs-cpufreq
cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs
cpufreq: brcmstb-avs-cpufreq: add debugfs support
Documentation/cpu-freq/brcmstb-avs-cpufreq.txt | 27 +
.../bindings/cpufreq/brcm,stb-avs-cpu-freq.txt | 77 ++
MAINTAINERS | 9 +
drivers/cpufreq/Kconfig.arm | 10 +
drivers/cpufreq/Makefile | 1 +
drivers/cpufreq/brcmstb-avs-cpufreq.c | 1026 ++++++++++++++++++++
6 files changed, 1150 insertions(+)
create mode 100644 Documentation/cpu-freq/brcmstb-avs-cpufreq.txt
create mode 100644 Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
create mode 100644 drivers/cpufreq/brcmstb-avs-cpufreq.c
--
2.7.4
My apologies. Please ignore this e-mail. Proper series coming up shortly.
Regards,
-Markus
On 7 October 2016 at 16:20, Markus Mayer <[email protected]> wrote:
> This series contains the CPUfreq driver for Broadcom SoCs that use "AVS
> Firmware" for voltage and frequency scaling. All voltage and frequency
> transitions are performed by the firmware and are therefore hidden from
> Linux.
>
> The driver provides a standard CPUfreq interface to other kernel
> components and to userland on the one hand and communicates with the
> AVS co-processor on the other.
>
> Communication between the two processors is via shared mailbox
> registers and interrupts (ARM -> AVS to tell the firmware that there is
> a command to process and AVS -> ARM to tell the driver that a command
> finished executing).
>
> lkml.org seems to be down for me. Here are patchwork links to the original
> series:
>
> https://patchwork.kernel.org/patch/9278119/
> https://patchwork.kernel.org/patch/9278121/
> https://patchwork.kernel.org/patch/9278127/
>
> Changes from v1:
> - renamed binding document
> - rewrote the introduction of the binding document
> - created a new driver documentation file that contains Linux specific
> information that was previously part of the binding document
> - renamed the driver (and related config options) to include a reference
> to "STB", since this implementation is primarily intended for use on
> set-top boxes
> - improved comments
> - updated function __map_region()
> - updated struct private_data
> - added code to unmap memory regions in the error and exit paths
> - added new sysfs property to report frequency directly from the
> co-processor register
>
> Markus Mayer (3):
> dt: cpufreq: brcm: New binding document for brcmstb-avs-cpufreq
> cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs
> cpufreq: brcmstb-avs-cpufreq: add debugfs support
>
> Documentation/cpu-freq/brcmstb-avs-cpufreq.txt | 27 +
> .../bindings/cpufreq/brcm,stb-avs-cpu-freq.txt | 77 ++
> MAINTAINERS | 9 +
> drivers/cpufreq/Kconfig.arm | 10 +
> drivers/cpufreq/Makefile | 1 +
> drivers/cpufreq/brcmstb-avs-cpufreq.c | 1026 ++++++++++++++++++++
> 6 files changed, 1150 insertions(+)
> create mode 100644 Documentation/cpu-freq/brcmstb-avs-cpufreq.txt
> create mode 100644 Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
> create mode 100644 drivers/cpufreq/brcmstb-avs-cpufreq.c
>
> --
> 2.7.4
>