When the hardware is synthesized with multiple queues, all queues are
disabled for default. This patch adds the rx queues configuration.
This patch was successfully tested in a Synopsys QoS Reference design.
Signed-off-by: Joao Pinto <[email protected]>
---
changes v2 -> v3 (Seraphin Bonnaffe):
- GMAC_RX_QUEUE_CLEAR macro simplified
changes v1 -> v2 (Niklas Cassel and Seraphin Bonnaffe):
- Instead of using number of DMA channels, lets use number of queues
- Create 2 flavors of RX queue enable Macros: AV and DCB (AV by default)
- Make sure that the RX queue related bits are cleared before setting
- Check if rx_queue_enable is available before executing
drivers/net/ethernet/stmicro/stmmac/common.h | 5 +++++
drivers/net/ethernet/stmicro/stmmac/dwmac4.h | 8 ++++++++
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 12 ++++++++++++
drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 5 +++++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 22 ++++++++++++++++++++++
5 files changed, 52 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index b13a144..6c96291 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -323,6 +323,9 @@ struct dma_features {
/* TX and RX number of channels */
unsigned int number_rx_channel;
unsigned int number_tx_channel;
+ /* TX and RX number of queues */
+ unsigned int number_rx_queues;
+ unsigned int number_tx_queues;
/* Alternate (enhanced) DESC mode */
unsigned int enh_desc;
};
@@ -454,6 +457,8 @@ struct stmmac_ops {
void (*core_init)(struct mac_device_info *hw, int mtu);
/* Enable and verify that the IPC module is supported */
int (*rx_ipc)(struct mac_device_info *hw);
+ /* Enable RX Queues */
+ void (*rx_queue_enable)(struct mac_device_info *hw, u32 queue);
/* Dump MAC registers */
void (*dump_regs)(struct mac_device_info *hw);
/* Handle extra events on specific interrupts hw dependent */
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
index 3e8d4fe..b524598 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
@@ -22,6 +22,7 @@
#define GMAC_HASH_TAB_32_63 0x00000014
#define GMAC_RX_FLOW_CTRL 0x00000090
#define GMAC_QX_TX_FLOW_CTRL(x) (0x70 + x * 4)
+#define GMAC_RXQ_CTRL0 0x000000a0
#define GMAC_INT_STATUS 0x000000b0
#define GMAC_INT_EN 0x000000b4
#define GMAC_PCS_BASE 0x000000e0
@@ -44,6 +45,11 @@
#define GMAC_MAX_PERFECT_ADDRESSES 128
+/* MAC RX Queue Enable */
+#define GMAC_RX_QUEUE_CLEAR(queue) ~(GENMASK(1, 0) << ((queue) * 2))
+#define GMAC_RX_AV_QUEUE_ENABLE(queue) BIT((queue) * 2)
+#define GMAC_RX_DCB_QUEUE_ENABLE(queue) BIT(((queue) * 2) + 1)
+
/* MAC Flow Control RX */
#define GMAC_RX_FLOW_CTRL_RFE BIT(0)
@@ -133,6 +139,8 @@ enum power_event {
/* MAC HW features2 bitmap */
#define GMAC_HW_FEAT_TXCHCNT GENMASK(21, 18)
#define GMAC_HW_FEAT_RXCHCNT GENMASK(15, 12)
+#define GMAC_HW_FEAT_TXQCNT GENMASK(9, 6)
+#define GMAC_HW_FEAT_RXQCNT GENMASK(3, 0)
/* MAC HW ADDR regs */
#define GMAC_HI_DCS GENMASK(18, 16)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index eaed7cb..ecfbf57 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -59,6 +59,17 @@ static void dwmac4_core_init(struct mac_device_info *hw, int mtu)
writel(value, ioaddr + GMAC_INT_EN);
}
+static void dwmac4_rx_queue_enable(struct mac_device_info *hw, u32 queue)
+{
+ void __iomem *ioaddr = hw->pcsr;
+ u32 value = readl(ioaddr + GMAC_RXQ_CTRL0);
+
+ value &= GMAC_RX_QUEUE_CLEAR(queue);
+ value |= GMAC_RX_AV_QUEUE_ENABLE(queue);
+
+ writel(value, ioaddr + GMAC_RXQ_CTRL0);
+}
+
static void dwmac4_dump_regs(struct mac_device_info *hw)
{
void __iomem *ioaddr = hw->pcsr;
@@ -392,6 +403,7 @@ static void dwmac4_debug(void __iomem *ioaddr, struct stmmac_extra_stats *x)
static const struct stmmac_ops dwmac4_ops = {
.core_init = dwmac4_core_init,
.rx_ipc = dwmac4_rx_ipc_enable,
+ .rx_queue_enable = dwmac4_rx_queue_enable,
.dump_regs = dwmac4_dump_regs,
.host_irq_status = dwmac4_irq_status,
.flow_ctrl = dwmac4_flow_ctrl,
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
index 8196ab5..377d1b4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
@@ -303,6 +303,11 @@ static void dwmac4_get_hw_feature(void __iomem *ioaddr,
((hw_cap & GMAC_HW_FEAT_RXCHCNT) >> 12) + 1;
dma_cap->number_tx_channel =
((hw_cap & GMAC_HW_FEAT_TXCHCNT) >> 18) + 1;
+ /* TX and RX number of queues */
+ dma_cap->number_rx_queues =
+ ((hw_cap & GMAC_HW_FEAT_RXQCNT) >> 0) + 1;
+ dma_cap->number_tx_queues =
+ ((hw_cap & GMAC_HW_FEAT_TXQCNT) >> 6) + 1;
/* IEEE 1588-2002 */
dma_cap->time_stamp = 0;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 3e40578..bc9cff9 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1271,6 +1271,24 @@ static void free_dma_desc_resources(struct stmmac_priv *priv)
}
/**
+ * stmmac_mac_enable_rx_queues - Enable MAC rx queues
+ * @priv: driver private structure
+ * Description: It is used for enabling the rx queues in the MAC
+ */
+static void stmmac_mac_enable_rx_queues(struct stmmac_priv *priv)
+{
+ int rx_count = priv->dma_cap.number_rx_queues;
+ int queue = 0;
+
+ /* If GMAC does not have multiqueues, then this is not necessary*/
+ if (rx_count == 1)
+ return;
+
+ for (queue = 0; queue < rx_count; queue++)
+ priv->hw->mac->rx_queue_enable(priv->hw, queue);
+}
+
+/**
* stmmac_dma_operation_mode - HW DMA operation mode
* @priv: driver private structure
* Description: it is used for configuring the DMA operation mode register in
@@ -1691,6 +1709,10 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
/* Initialize the MAC Core */
priv->hw->mac->core_init(priv->hw, dev->mtu);
+ /* Initialize MAC RX Queues */
+ if (priv->hw->mac->rx_queue_enable)
+ stmmac_mac_enable_rx_queues(priv);
+
ret = priv->hw->mac->rx_ipc(priv->hw);
if (!ret) {
netdev_warn(priv->dev, "RX IPC Checksum Offload disabled\n");
--
2.9.3
From: Joao Pinto <[email protected]>
Date: Tue, 20 Dec 2016 17:09:28 +0000
> When the hardware is synthesized with multiple queues, all queues are
> disabled for default. This patch adds the rx queues configuration.
> This patch was successfully tested in a Synopsys QoS Reference design.
>
> Signed-off-by: Joao Pinto <[email protected]>
> ---
> changes v2 -> v3 (Seraphin Bonnaffe):
> - GMAC_RX_QUEUE_CLEAR macro simplified
> changes v1 -> v2 (Niklas Cassel and Seraphin Bonnaffe):
> - Instead of using number of DMA channels, lets use number of queues
> - Create 2 flavors of RX queue enable Macros: AV and DCB (AV by default)
> - Make sure that the RX queue related bits are cleared before setting
> - Check if rx_queue_enable is available before executing
This change seems more appropriate for net-next, please resubmit when
that tree opens up again.
Thanks.
?s 6:26 PM de 12/21/2016, David Miller escreveu:
> From: Joao Pinto <[email protected]>
> Date: Tue, 20 Dec 2016 17:09:28 +0000
>
>> When the hardware is synthesized with multiple queues, all queues are
>> disabled for default. This patch adds the rx queues configuration.
>> This patch was successfully tested in a Synopsys QoS Reference design.
>>
>> Signed-off-by: Joao Pinto <[email protected]>
>> ---
>> changes v2 -> v3 (Seraphin Bonnaffe):
>> - GMAC_RX_QUEUE_CLEAR macro simplified
>> changes v1 -> v2 (Niklas Cassel and Seraphin Bonnaffe):
>> - Instead of using number of DMA channels, lets use number of queues
>> - Create 2 flavors of RX queue enable Macros: AV and DCB (AV by default)
>> - Make sure that the RX queue related bits are cleared before setting
>> - Check if rx_queue_enable is available before executing
>
> This change seems more appropriate for net-next, please resubmit when
> that tree opens up again.
>
> Thanks.
>
Ok, great! Could you please send me an estimate of when the net-next is going to
open again?
Thanks