Hi,
after running 2.4.20-ac2 for quite some time, I wanted to give
2.4.21-rc6 a try, but I got the following OOPS (copied by hand).
I tried noapic/apic with the same result.
The Mainboard is a EPOX 8K5A3+ with 2 HPT374 controllers onboard, the
RAM is memtested.
lspci -v is attached beneath and I can provide more information if needed.
pikelot:~# ksymoops oops.txt -o /lib/modules/2.4.21-rc6 -m /boot/System.map -KL
ksymoops 2.4.8 on i686 2.4.20-ac2. Options used
-V (default)
-K (specified)
-L (specified)
-o /lib/modules/2.4.21-rc6 (specified)
-m /boot/System.map (specified)
No modules in ksyms, skipping objects
*pde = 00000000
CPU: 0
EIP: 0010:[<c01b7c39>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010292
eax: 0000000c ebx: 00000051 ecx: 0000000c edx: 00000000
esi: 30070000 edi: 00000000 ebp: c1593400 esp: c159bf10
ds: 0018 es: 0018 ss: 0018
Stack: c01b7b8a 0000000c 00000000 00000000 0c400008 00000000 00000008 c1593400
c0309358 00000000 00000001 c01b8049 c0309358 0000000c 0c000005 c0309358
c03092a8 c01baf95 c0309358 0000000c 00000246 00000002 c03092a8 c0105000
Call Trace: [<c01b7b8a>] [<c01b8049>] [<c01baf95>] [<c0105000>] [<c01bbb38>]
[<c0105053>] [<c0105000>] [<c0105040>]
Code: 0f b6 02 84 c0 74 0e 38 c8 74 0a 83 c2 08 0f b6 02 84 c0 75
>>EIP; c01b7c39 <pci_bus_clock_list+9/30> <=====
Trace; c01b7b8a <hpt3xx_ratefilter+16a/170>
Trace; c01b8049 <hpt3xx_tune_chipset+49/100>
Trace; c01baf95 <probe_hwif+1c5/2b0>
Trace; c0105000 <_stext+0/0>
Trace; c01bbb38 <ideprobe_init+b8/c0>
Trace; c0105053 <init+13/130>
Trace; c0105000 <_stext+0/0>
Trace; c0105040 <init+0/130>
Code; c01b7c39 <pci_bus_clock_list+9/30>
00000000 <_EIP>:
Code; c01b7c39 <pci_bus_clock_list+9/30> <=====
0: 0f b6 02 movzbl (%edx),%eax <=====
Code; c01b7c3c <pci_bus_clock_list+c/30>
3: 84 c0 test %al,%al
Code; c01b7c3e <pci_bus_clock_list+e/30>
5: 74 0e je 15 <_EIP+0x15>
Code; c01b7c40 <pci_bus_clock_list+10/30>
7: 38 c8 cmp %cl,%al
Code; c01b7c42 <pci_bus_clock_list+12/30>
9: 74 0a je 15 <_EIP+0x15>
Code; c01b7c44 <pci_bus_clock_list+14/30>
b: 83 c2 08 add $0x8,%edx
Code; c01b7c47 <pci_bus_clock_list+17/30>
e: 0f b6 02 movzbl (%edx),%eax
Code; c01b7c4a <pci_bus_clock_list+1a/30>
11: 84 c0 test %al,%al
Code; c01b7c4c <pci_bus_clock_list+1c/30>
13: 75 00 jne 15 <_EIP+0x15>
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
Flags: bus master, 66Mhz, medium devsel, latency 0
Memory at e4000000 (32-bit, prefetchable) [size=16M]
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Capabilities: [80] Power Management version 2
00:08.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+] (rev 54) (prog-if 00 [VGA])
Flags: VGA palette snoop, medium devsel, IRQ 16
Memory at e0000000 (32-bit, non-prefetchable) [size=64M]
Expansion ROM at <unassigned> [disabled] [size=64K]
00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Flags: bus master, medium devsel, latency 32, IRQ 18
I/O ports at 9000 [size=256]
Memory at e6000000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [50] Power Management version 2
00:0e.0 RAID bus controller: Triones Technologies, Inc. HPT374 (rev 07)
Subsystem: Triones Technologies, Inc.: Unknown device 0001
Flags: bus master, 66Mhz, medium devsel, latency 120, IRQ 17
I/O ports at 9400 [size=8]
I/O ports at 9800 [size=4]
I/O ports at 9c00 [size=8]
I/O ports at a000 [size=4]
I/O ports at a400 [size=256]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [60] Power Management version 2
00:0e.1 RAID bus controller: Triones Technologies, Inc. HPT374 (rev 07)
Subsystem: Triones Technologies, Inc.: Unknown device 0001
Flags: bus master, 66Mhz, medium devsel, latency 120, IRQ 17
I/O ports at a800 [size=8]
I/O ports at ac00 [size=4]
I/O ports at b000 [size=8]
I/O ports at b400 [size=4]
I/O ports at b800 [size=256]
Capabilities: [60] Power Management version 2
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
Subsystem: VIA Technologies, Inc. VT8235 ISA Bridge
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT8235 Bus Master ATA133/100/66/33 IDE
Flags: bus master, medium devsel, latency 32, IRQ 16
I/O ports at c800 [size=16]
Capabilities: [c0] Power Management version 2
Thanks in advance,
Karsten