Enable the SoC thermal sensor on RK3399-Q7 (Puma).
As we want to do do a full board reset instead of just a SoC one, set
hw-tshut-mode to GPIO.
Signed-off-by: Klaus Goger <[email protected]>
---
arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index a3fcb803ff69..524f47c7e79f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -523,6 +523,12 @@
};
};
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
&u2phy1 {
status = "okay";
--
2.11.0
Am Dienstag, 30. Januar 2018, 11:15:55 CET schrieb Klaus Goger:
> Enable the SoC thermal sensor on RK3399-Q7 (Puma).
> As we want to do do a full board reset instead of just a SoC one, set
> hw-tshut-mode to GPIO.
>
> Signed-off-by: Klaus Goger <[email protected]>
applied for 4.17
Thanks
Heiko