Hi,
I have a serial mouse, that works ok with 2.4, but in 2.6.0-test[12]
don't work.
The kernel does not recognize the serial port.
root@djgera:~# cat /dev/ttyS0
cat: /dev/ttyS0: No such device
I am sure that the configuration options that use are well, considering
like main to these:
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_SERIAL=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
Apparently kernel recognizes both serial ports, look this
in this port i have connected mouse. ttyS0
root@djgera:~# cat /sys/bus/pnp/devices/00\:0a/*
PNP0501
16550A-compatible COM port
irq 3,4,5,7 High-Edge
Dependent: 01 - Priority acceptable
port 0x3f8-0x3f8, align 0x0, size 0x8, 16-bit address decoding
Dependent: 02 - Priority acceptable
port 0x2f8-0x2f8, align 0x0, size 0x8, 16-bit address decoding
Dependent: 03 - Priority acceptable
port 0x3e8-0x3e8, align 0x0, size 0x8, 16-bit address decoding
Dependent: 04 - Priority acceptable
port 0x2e8-0x2e8, align 0x0, size 0x8, 16-bit address decoding
0
state = active
io 0x3f8-0x3ff
irq 4
root@djgera:~# cat /proc/bus/input/devices
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
H: Handlers=kbd
B: EV=40001
B: SND=6
I: Bus=0011 Vendor=0001 Product=0002 Version=ab02
N: Name="AT Set 2 keyboard"
P: Phys=isa0060/serio0/input0
H: Handlers=kbd
B: EV=120003
B: KEY=4 2000000 c061f9 fbc9d621 efdfffdf ffefffff ffffffff fffffffe
B: LED=7
no mouse information here.
what is wrong?
Oh! also activate DEBUG in drivers/input/serio/i8042.c and no debug
messages appears when moving mouse.
Thanks in Advance.
attached the dmesg and config.
--
Gerardo Exequiel Pozzi ( djgera )
http://www.vmlinuz.com.ar http://www.djgera.com.ar
KeyID: 0x1B8C330D
Key fingerprint = 0CAA D5D4 CD85 4434 A219 76ED 39AB 221B 1B8C 330D
On Mon, 28 Jul 2003 05:13:07 -0300, Gerardo Exequiel Pozzi wrote:
>Hi,
>
>I have a serial mouse, that works ok with 2.4, but in 2.6.0-test[12]
>don't work.
>
>The kernel does not recognize the serial port.
>
>root@djgera:~# cat /dev/ttyS0
>cat: /dev/ttyS0: No such device
>
>I am sure that the configuration options that use are well, considering
>like main to these:
>
>CONFIG_INPUT_MOUSEDEV=y
>CONFIG_INPUT_MOUSE=y
>CONFIG_MOUSE_SERIAL=y
>CONFIG_SERIO=y
>CONFIG_SERIO_I8042=y
>CONFIG_SERIO_SERPORT=y
>CONFIG_INPUT_KEYBOARD=y
>CONFIG_KEYBOARD_ATKBD=y
>CONFIG_INPUT_MISC=y
>CONFIG_INPUT_PCSPKR=y
>
sorry! i don'n have the option CONFIG_SERIAL_8250, now works perfectly.
the dmesg:
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Sorry! and sorry!
>Apparently kernel recognizes both serial ports, look this
>in this port i have connected mouse. ttyS0
>
>root@djgera:~# cat /sys/bus/pnp/devices/00\:0a/*
>PNP0501
>16550A-compatible COM port
>irq 3,4,5,7 High-Edge
>Dependent: 01 - Priority acceptable
> port 0x3f8-0x3f8, align 0x0, size 0x8, 16-bit address decoding
>Dependent: 02 - Priority acceptable
> port 0x2f8-0x2f8, align 0x0, size 0x8, 16-bit address decoding
>Dependent: 03 - Priority acceptable
> port 0x3e8-0x3e8, align 0x0, size 0x8, 16-bit address decoding
>Dependent: 04 - Priority acceptable
> port 0x2e8-0x2e8, align 0x0, size 0x8, 16-bit address decoding
>0
>state = active
>io 0x3f8-0x3ff
>irq 4
>
>root@djgera:~# cat /proc/bus/input/devices
>I: Bus=0010 Vendor=001f Product=0001 Version=0100
>N: Name="PC Speaker"
>P: Phys=isa0061/input0
>H: Handlers=kbd
>B: EV=40001
>B: SND=6
>
>I: Bus=0011 Vendor=0001 Product=0002 Version=ab02
>N: Name="AT Set 2 keyboard"
>P: Phys=isa0060/serio0/input0
>H: Handlers=kbd
>B: EV=120003
>B: KEY=4 2000000 c061f9 fbc9d621 efdfffdf ffefffff ffffffff fffffffe
>B: LED=7
>
>
>no mouse information here.
>what is wrong?
>
>Oh! also activate DEBUG in drivers/input/serio/i8042.c and no debug
>messages appears when moving mouse.
>
>
>Thanks in Advance.
>
>attached the dmesg and config.
>
>
chau, djgera
--
Gerardo Exequiel Pozzi ( djgera )
http://www.vmlinuz.com.ar http://www.djgera.com.ar
KeyID: 0x1B8C330D
Key fingerprint = 0CAA D5D4 CD85 4434 A219 76ED 39AB 221B 1B8C 330D