This is the start of the stable review cycle for the 4.14.33 release.
There are 67 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sun Apr 8 08:43:05 UTC 2018.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.33-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.14.33-rc1
Greg Kroah-Hartman <[email protected]>
Revert "ip6_vti: adjust vti mtu according to mtu of lower device"
Greg Kroah-Hartman <[email protected]>
Revert "cpufreq: Fix governor module removal race"
Greg Kroah-Hartman <[email protected]>
Revert "ARM: dts: omap3-n900: Fix the audio CODEC's reset pin"
Greg Kroah-Hartman <[email protected]>
Revert "ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin"
Mikulas Patocka <[email protected]>
Fix slab name "biovec-(1<<(21-12))"
Matthias Brugger <[email protected]>
net: hns: Fix ethtool private flags
Keerthy <[email protected]>
ARM: dts: DRA76-EVM: Set powerhold property for tps65917
Mike Frysinger <[email protected]>
vt: change SGR 21 to follow the standards
Ondrej Zary <[email protected]>
Input: i8042 - enable MUX on Sony VAIO VGN-CS series to fix touchpad
Dennis Wassenberg <[email protected]>
Input: i8042 - add Lenovo ThinkPad L460 to i8042 reset list
Masaki Ota <[email protected]>
Input: ALPS - fix TrackStick detection on Thinkpad L570 and Latitude 7370
Gaku Inami <[email protected]>
Revert "base: arch_topology: fix section mismatch build warnings"
Frank Mori Hess <[email protected]>
staging: comedi: ni_mio_common: ack ai fifo error interrupts.
Liu Bo <[email protected]>
Btrfs: fix unexpected cow in run_delalloc_nocow
Eric Biggers <[email protected]>
crypto: x86/cast5-avx - fix ECB encryption when long sg follows short one
Leonard Crestez <[email protected]>
crypto: arm,arm64 - Fix random regeneration of S_shipped
Maciej S. Szmigiero <[email protected]>
crypto: ccp - return an actual key size from RSA max_size callback
Rui Miguel Silva <[email protected]>
crypto: caam - Fix null dereference at error path
Herbert Xu <[email protected]>
crypto: ahash - Fix early termination in hash walk
Conor McLoughlin <[email protected]>
crypto: testmgr - Fix incorrect values in PKCS#1 test vector
Gregory CLEMENT <[email protected]>
crypto: inside-secure - fix clock management
Herbert Xu <[email protected]>
crypto: lrw - Free rctx->ext with kzfree
Alexander Gerasiov <[email protected]>
parport_pc: Add support for WCH CH382L PCI-E single parallel port card.
Oliver Neukum <[email protected]>
media: usbtv: prevent double free in error case
Kees Cook <[email protected]>
/dev/mem: Avoid overwriting "err" in read_mem()
Colin Ian King <[email protected]>
mei: remove dev_err message on an unsupported ioctl
Joel Stanley <[email protected]>
serial: 8250: Add Nuvoton NPCM UART
Johan Hovold <[email protected]>
USB: serial: cp210x: add ELDAT Easywave RX09 id
Clemens Werther <[email protected]>
USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator
Major Hayden <[email protected]>
USB: serial: ftdi_sio: add RT Systems VX-8 cable
Omar Sandoval <[email protected]>
bitmap: fix memset optimization on big-endian systems
John Stultz <[email protected]>
usb: dwc2: Improve gadget state disconnection handling
Szymon Janc <[email protected]>
Bluetooth: Fix missing encryption refresh on Security Request
Arnd Bergmann <[email protected]>
phy: qcom-ufs: add MODULE_LICENSE tag
Florian Westphal <[email protected]>
netfilter: x_tables: add and use xt_check_proc_name
Paolo Abeni <[email protected]>
netfilter: drop template ct when conntrack is skipped.
Paolo Abeni <[email protected]>
l2tp: fix races with ipv4-mapped ipv6 addresses
Florian Westphal <[email protected]>
netfilter: bridge: ebt_among: add more missing match size checks
Michal Hocko <[email protected]>
netfilter: x_tables: make allocation less aggressive
Dennis Zhou <[email protected]>
percpu: add __GFP_NORETRY semantics to the percpu balancing path
Steffen Klassert <[email protected]>
xfrm: Refuse to insert 32 bit userspace socket policies on 64 bit systems
Greg Hackmann <[email protected]>
net: xfrm: use preempt-safe this_cpu_read() in ipcomp_alloc_tfms()
Roland Dreier <[email protected]>
RDMA/ucma: Introduce safer rdma_addr_size() variants
Leon Romanovsky <[email protected]>
RDMA/ucma: Check that device exists prior to accessing it
Leon Romanovsky <[email protected]>
RDMA/ucma: Check that device is connected prior to access it
Jason Gunthorpe <[email protected]>
RDMA/rdma_cm: Fix use after free race with process_one_req
Leon Romanovsky <[email protected]>
RDMA/ucma: Ensure that CM_ID exists prior to access it
Leon Romanovsky <[email protected]>
RDMA/ucma: Fix use-after-free access in ucma_close
Leon Romanovsky <[email protected]>
RDMA/ucma: Check AF family prior resolving address
Florian Westphal <[email protected]>
xfrm_user: uncoditionally validate esn replay attribute struct
Richard Narron <[email protected]>
partitions/msdos: Unable to mount UFS 44bsd partitions
Nicholas Piggin <[email protected]>
powerpc/64s: Fix i-side SLB miss bad address handler saving nonvolatile GPRs
Nicholas Piggin <[email protected]>
powerpc/64s: Fix lost pending interrupt due to race causing lost update to irq_happened
Pierre-Yves MORDRET <[email protected]>
i2c: i2c-stm32f7: fix no check on returned setup
Mike Kravetz <[email protected]>
ipc/shm.c: add split function to shm_vm_ops
Yan, Zheng <[email protected]>
ceph: only dirty ITER_IOVEC pages for direct read
Linus Torvalds <[email protected]>
perf/hwbp: Simplify the perf-hwbp code, fix documentation
Andrew Banman <[email protected]>
x86/platform/uv/BAU: Add APIC idt entry
Dan Carpenter <[email protected]>
ALSA: pcm: potential uninitialized return values
Stefan Roese <[email protected]>
ALSA: pcm: Use dma_bytes as size parameter in dma_mmap_coherent()
Nobutaka Okabe <[email protected]>
ALSA: usb-audio: Add native DSD support for TEAC UD-301
Boris Brezillon <[email protected]>
mtd: nand: atmel: Fix get_sectorsize() function
Linus Walleij <[email protected]>
mtd: jedec_probe: Fix crash in jedec_read_mfr()
Philipp Rossak <[email protected]>
ARM: dts: sun6i: a31s: bpi-m2: add missing regulators
Philipp Rossak <[email protected]>
ARM: dts: sun6i: a31s: bpi-m2: improve pmic properties
Fabio Estevam <[email protected]>
ARM: 8746/1: vfp: Go back to clearing vfp_current_hw_state[]
Tony Lindgren <[email protected]>
ARM: OMAP: Fix SRAM W+X mapping
-------------
Diffstat:
Documentation/devicetree/bindings/serial/8250.txt | 1 +
Makefile | 4 +-
arch/arm/boot/dts/am335x-pepper.dts | 2 +-
arch/arm/boot/dts/dra76-evm.dts | 1 +
arch/arm/boot/dts/omap3-n900.dts | 4 +-
arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 63 ++++++++++++++++++++--
arch/arm/crypto/Makefile | 2 +
arch/arm/plat-omap/include/plat/sram.h | 11 +---
arch/arm/plat-omap/sram.c | 36 ++++++++++++-
arch/arm/vfp/vfpmodule.c | 2 +-
arch/arm64/crypto/Makefile | 2 +
arch/powerpc/kernel/exceptions-64s.S | 2 +-
arch/powerpc/kernel/irq.c | 8 +++
arch/x86/crypto/cast5_avx_glue.c | 3 +-
arch/x86/include/asm/hw_irq.h | 1 +
arch/x86/kernel/idt.c | 3 ++
arch/x86/platform/uv/tlb_uv.c | 2 -
block/bio.c | 4 +-
block/partitions/msdos.c | 4 +-
crypto/ahash.c | 7 +--
crypto/lrw.c | 2 +-
crypto/testmgr.h | 6 +--
drivers/base/arch_topology.c | 12 ++---
drivers/char/mem.c | 6 +--
drivers/cpufreq/cpufreq.c | 6 ---
drivers/crypto/caam/ctrl.c | 3 --
drivers/crypto/ccp/ccp-crypto-rsa.c | 7 ++-
drivers/crypto/inside-secure/safexcel.c | 2 +-
drivers/i2c/busses/i2c-stm32f7.c | 5 ++
drivers/infiniband/core/addr.c | 25 +++++++++
drivers/infiniband/core/ucma.c | 61 +++++++++++++--------
drivers/input/mouse/alps.c | 24 +++++++--
drivers/input/serio/i8042-x86ia64io.h | 24 +++++++++
drivers/media/usb/usbtv/usbtv-core.c | 2 +
drivers/misc/mei/main.c | 1 -
drivers/mtd/chips/jedec_probe.c | 2 +
drivers/mtd/nand/atmel/pmecc.c | 2 +-
drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c | 2 +-
drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c | 2 +-
drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c | 2 +-
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 4 +-
drivers/parport/parport_pc.c | 4 ++
drivers/phy/qualcomm/phy-qcom-ufs.c | 5 ++
drivers/staging/comedi/drivers/ni_mio_common.c | 2 +
drivers/tty/serial/8250/8250_of.c | 1 +
drivers/tty/serial/8250/8250_port.c | 33 ++++++++++++
drivers/tty/vt/vt.c | 6 ++-
drivers/usb/dwc2/hcd.c | 7 ++-
drivers/usb/serial/cp210x.c | 1 +
drivers/usb/serial/ftdi_sio.c | 2 +
drivers/usb/serial/ftdi_sio_ids.h | 9 ++++
fs/btrfs/inode.c | 37 +++++++++++--
fs/ceph/file.c | 9 ++--
include/linux/bitmap.h | 22 ++++++--
include/linux/netfilter/x_tables.h | 2 +
include/rdma/ib_addr.h | 2 +
include/uapi/linux/serial_core.h | 3 ++
ipc/shm.c | 12 +++++
kernel/events/hw_breakpoint.c | 30 +++--------
mm/percpu-km.c | 8 +--
mm/percpu-vm.c | 18 ++++---
mm/percpu.c | 45 ++++++++++------
net/bluetooth/smp.c | 8 ++-
net/bridge/netfilter/ebt_among.c | 34 ++++++++++++
net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c | 14 ++++-
net/ipv6/ip6_vti.c | 20 -------
net/l2tp/l2tp_core.c | 38 +++++++------
net/l2tp/l2tp_core.h | 3 --
net/netfilter/x_tables.c | 37 ++++++++++++-
net/netfilter/xt_hashlimit.c | 16 +++---
net/netfilter/xt_recent.c | 6 +--
net/xfrm/xfrm_ipcomp.c | 2 +-
net/xfrm/xfrm_state.c | 5 ++
net/xfrm/xfrm_user.c | 21 +++-----
sound/core/oss/pcm_oss.c | 4 +-
sound/core/pcm_native.c | 2 +-
sound/usb/quirks.c | 1 +
77 files changed, 603 insertions(+), 228 deletions(-)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tony Lindgren <[email protected]>
commit eb85a355c3afd9379f5953cfe2df73632d14c884 upstream.
We are still using custom SRAM code for some SoCs and are not marking
the PM code mapped to SRAM as read-only and executable after we're
done. With CONFIG_DEBUG_WX=y, we will get "Found insecure W+X mapping
at address" warning.
Let's fix this issue the same way as commit 728bbe75c82f ("misc: sram:
Introduce support code for protect-exec sram type") is doing for
drivers/misc/sram-exec.c.
On omap3, we need to restore SRAM when returning from off mode after
idle, so init time configuration is not enough.
And as we no longer have users for omap_sram_push_address() we can
make it static while at it.
Note that eventually we should be using sram-exec.c for all SoCs.
Cc: [email protected] # v4.12+
Cc: Dave Gerlach <[email protected]>
Reported-by: Pavel Machek <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/plat-omap/include/plat/sram.h | 11 ----------
arch/arm/plat-omap/sram.c | 36 ++++++++++++++++++++++++++++++++-
2 files changed, 36 insertions(+), 11 deletions(-)
--- a/arch/arm/plat-omap/include/plat/sram.h
+++ b/arch/arm/plat-omap/include/plat/sram.h
@@ -5,13 +5,4 @@ void omap_map_sram(unsigned long start,
unsigned long skip, int cached);
void omap_sram_reset(void);
-extern void *omap_sram_push_address(unsigned long size);
-
-/* Macro to push a function to the internal SRAM, using the fncpy API */
-#define omap_sram_push(funcp, size) ({ \
- typeof(&(funcp)) _res = NULL; \
- void *_sram_address = omap_sram_push_address(size); \
- if (_sram_address) \
- _res = fncpy(_sram_address, &(funcp), size); \
- _res; \
-})
+extern void *omap_sram_push(void *funcp, unsigned long size);
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -23,6 +23,7 @@
#include <asm/fncpy.h>
#include <asm/tlb.h>
#include <asm/cacheflush.h>
+#include <asm/set_memory.h>
#include <asm/mach/map.h>
@@ -42,7 +43,7 @@ static void __iomem *omap_sram_ceil;
* Note that fncpy requires the returned address to be aligned
* to an 8-byte boundary.
*/
-void *omap_sram_push_address(unsigned long size)
+static void *omap_sram_push_address(unsigned long size)
{
unsigned long available, new_ceil = (unsigned long)omap_sram_ceil;
@@ -60,6 +61,30 @@ void *omap_sram_push_address(unsigned lo
return (void *)omap_sram_ceil;
}
+void *omap_sram_push(void *funcp, unsigned long size)
+{
+ void *sram;
+ unsigned long base;
+ int pages;
+ void *dst = NULL;
+
+ sram = omap_sram_push_address(size);
+ if (!sram)
+ return NULL;
+
+ base = (unsigned long)sram & PAGE_MASK;
+ pages = PAGE_ALIGN(size) / PAGE_SIZE;
+
+ set_memory_rw(base, pages);
+
+ dst = fncpy(sram, funcp, size);
+
+ set_memory_ro(base, pages);
+ set_memory_x(base, pages);
+
+ return dst;
+}
+
/*
* The SRAM context is lost during off-idle and stack
* needs to be reset.
@@ -75,6 +100,9 @@ void omap_sram_reset(void)
void __init omap_map_sram(unsigned long start, unsigned long size,
unsigned long skip, int cached)
{
+ unsigned long base;
+ int pages;
+
if (size == 0)
return;
@@ -95,4 +123,10 @@ void __init omap_map_sram(unsigned long
*/
memset_io(omap_sram_base + omap_sram_skip, 0,
omap_sram_size - omap_sram_skip);
+
+ base = (unsigned long)omap_sram_base;
+ pages = PAGE_ALIGN(omap_sram_size) / PAGE_SIZE;
+
+ set_memory_ro(base, pages);
+ set_memory_x(base, pages);
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Fabio Estevam <[email protected]>
commit 1328f02005bbbaed15b9d5b7f3ab5ec9d4d5268a upstream.
Commit 384b38b66947 ("ARM: 7873/1: vfp: clear vfp_current_hw_state
for dying cpu") fixed the cpu dying notifier by clearing
vfp_current_hw_state[]. However commit e5b61bafe704 ("arm: Convert VFP
hotplug notifiers to state machine") incorrectly used the original
vfp_force_reload() function in the cpu dying notifier.
Fix it by going back to clearing vfp_current_hw_state[].
Fixes: e5b61bafe704 ("arm: Convert VFP hotplug notifiers to state machine")
Cc: linux-stable <[email protected]>
Reported-by: Kohji Okuno <[email protected]>
Signed-off-by: Fabio Estevam <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/vfp/vfpmodule.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -648,7 +648,7 @@ int vfp_restore_user_hwstate(struct user
*/
static int vfp_dying_cpu(unsigned int cpu)
{
- vfp_force_reload(cpu, current_thread_info());
+ vfp_current_hw_state[cpu] = NULL;
return 0;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steffen Klassert <[email protected]>
commit 19d7df69fdb2636856dc8919de72fc1bf8f79598 upstream.
We don't have a compat layer for xfrm, so userspace and kernel
structures have different sizes in this case. This results in
a broken configuration, so refuse to configure socket policies
when trying to insert from 32 bit userspace as we do it already
with policies inserted via netlink.
Reported-and-tested-by: [email protected]
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/xfrm/xfrm_state.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -2050,6 +2050,11 @@ int xfrm_user_policy(struct sock *sk, in
struct xfrm_mgr *km;
struct xfrm_policy *pol = NULL;
+#ifdef CONFIG_COMPAT
+ if (in_compat_syscall())
+ return -EOPNOTSUPP;
+#endif
+
if (!optval && !optlen) {
xfrm_sk_policy_insert(sk, XFRM_POLICY_IN, NULL);
xfrm_sk_policy_insert(sk, XFRM_POLICY_OUT, NULL);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Abeni <[email protected]>
commit b954f94023dcc61388c8384f0f14eb8e42c863c5 upstream.
The l2tp_tunnel_create() function checks for v4mapped ipv6
sockets and cache that flag, so that l2tp core code can
reusing it at xmit time.
If the socket is provided by the userspace, the connection
status of the tunnel sockets can change between the tunnel
creation and the xmit call, so that syzbot is able to
trigger the following splat:
BUG: KASAN: use-after-free in ip6_dst_idev include/net/ip6_fib.h:192
[inline]
BUG: KASAN: use-after-free in ip6_xmit+0x1f76/0x2260
net/ipv6/ip6_output.c:264
Read of size 8 at addr ffff8801bd949318 by task syz-executor4/23448
CPU: 0 PID: 23448 Comm: syz-executor4 Not tainted 4.16.0-rc4+ #65
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x24d lib/dump_stack.c:53
print_address_description+0x73/0x250 mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report+0x23c/0x360 mm/kasan/report.c:412
__asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
ip6_dst_idev include/net/ip6_fib.h:192 [inline]
ip6_xmit+0x1f76/0x2260 net/ipv6/ip6_output.c:264
inet6_csk_xmit+0x2fc/0x580 net/ipv6/inet6_connection_sock.c:139
l2tp_xmit_core net/l2tp/l2tp_core.c:1053 [inline]
l2tp_xmit_skb+0x105f/0x1410 net/l2tp/l2tp_core.c:1148
pppol2tp_sendmsg+0x470/0x670 net/l2tp/l2tp_ppp.c:341
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:640
___sys_sendmsg+0x767/0x8b0 net/socket.c:2046
__sys_sendmsg+0xe5/0x210 net/socket.c:2080
SYSC_sendmsg net/socket.c:2091 [inline]
SyS_sendmsg+0x2d/0x50 net/socket.c:2087
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x453e69
RSP: 002b:00007f819593cc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f819593d6d4 RCX: 0000000000453e69
RDX: 0000000000000081 RSI: 000000002037ffc8 RDI: 0000000000000004
RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000004c3 R14: 00000000006f72e8 R15: 0000000000000000
This change addresses the issues:
* explicitly checking for TCP_ESTABLISHED for user space provided sockets
* dropping the v4mapped flag usage - it can become outdated - and
explicitly invoking ipv6_addr_v4mapped() instead
The issue is apparently there since ancient times.
v1 -> v2: (many thanks to Guillaume)
- with csum issue introduced in v1
- replace pr_err with pr_debug
- fix build issue with IPV6 disabled
- move l2tp_sk_is_v4mapped in l2tp_core.c
v2 -> v3:
- don't update inet_daddr for v4mapped address, unneeded
- drop rendundant check at creation time
Reported-and-tested-by: [email protected]
Fixes: 3557baabf280 ("[L2TP]: PPP over L2TP driver core")
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/l2tp/l2tp_core.c | 38 ++++++++++++++++++--------------------
net/l2tp/l2tp_core.h | 3 ---
2 files changed, 18 insertions(+), 23 deletions(-)
--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -113,6 +113,13 @@ struct l2tp_net {
spinlock_t l2tp_session_hlist_lock;
};
+#if IS_ENABLED(CONFIG_IPV6)
+static bool l2tp_sk_is_v6(struct sock *sk)
+{
+ return sk->sk_family == PF_INET6 &&
+ !ipv6_addr_v4mapped(&sk->sk_v6_daddr);
+}
+#endif
static inline struct l2tp_tunnel *l2tp_tunnel(struct sock *sk)
{
@@ -1130,7 +1137,7 @@ static int l2tp_xmit_core(struct l2tp_se
/* Queue the packet to IP for output */
skb->ignore_df = 1;
#if IS_ENABLED(CONFIG_IPV6)
- if (tunnel->sock->sk_family == PF_INET6 && !tunnel->v4mapped)
+ if (l2tp_sk_is_v6(tunnel->sock))
error = inet6_csk_xmit(tunnel->sock, skb, NULL);
else
#endif
@@ -1193,6 +1200,15 @@ int l2tp_xmit_skb(struct l2tp_session *s
goto out_unlock;
}
+ /* The user-space may change the connection status for the user-space
+ * provided socket at run time: we must check it under the socket lock
+ */
+ if (tunnel->fd >= 0 && sk->sk_state != TCP_ESTABLISHED) {
+ kfree_skb(skb);
+ ret = NET_XMIT_DROP;
+ goto out_unlock;
+ }
+
/* Get routing info from the tunnel socket */
skb_dst_drop(skb);
skb_dst_set(skb, dst_clone(__sk_dst_check(sk, 0)));
@@ -1212,7 +1228,7 @@ int l2tp_xmit_skb(struct l2tp_session *s
/* Calculate UDP checksum if configured to do so */
#if IS_ENABLED(CONFIG_IPV6)
- if (sk->sk_family == PF_INET6 && !tunnel->v4mapped)
+ if (l2tp_sk_is_v6(sk))
udp6_set_csum(udp_get_no_check6_tx(sk),
skb, &inet6_sk(sk)->saddr,
&sk->sk_v6_daddr, udp_len);
@@ -1616,24 +1632,6 @@ int l2tp_tunnel_create(struct net *net,
if (cfg != NULL)
tunnel->debug = cfg->debug;
-#if IS_ENABLED(CONFIG_IPV6)
- if (sk->sk_family == PF_INET6) {
- struct ipv6_pinfo *np = inet6_sk(sk);
-
- if (ipv6_addr_v4mapped(&np->saddr) &&
- ipv6_addr_v4mapped(&sk->sk_v6_daddr)) {
- struct inet_sock *inet = inet_sk(sk);
-
- tunnel->v4mapped = true;
- inet->inet_saddr = np->saddr.s6_addr32[3];
- inet->inet_rcv_saddr = sk->sk_v6_rcv_saddr.s6_addr32[3];
- inet->inet_daddr = sk->sk_v6_daddr.s6_addr32[3];
- } else {
- tunnel->v4mapped = false;
- }
- }
-#endif
-
/* Mark socket as an encapsulation socket. See net/ipv4/udp.c */
tunnel->encap = encap;
if (encap == L2TP_ENCAPTYPE_UDP) {
--- a/net/l2tp/l2tp_core.h
+++ b/net/l2tp/l2tp_core.h
@@ -195,9 +195,6 @@ struct l2tp_tunnel {
struct sock *sock; /* Parent socket */
int fd; /* Parent fd, if tunnel socket
* was created by userspace */
-#if IS_ENABLED(CONFIG_IPV6)
- bool v4mapped;
-#endif
struct work_struct del_work;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefan Roese <[email protected]>
commit 9066ae7ff5d89c0b5daa271e2d573540097a94fa upstream.
When trying to use the driver (e.g. aplay *.wav), the 4MiB DMA buffer
will get mmapp'ed in 16KiB chunks. But this fails with the 2nd 16KiB
area, as the page offset is outside of the VMA range (size), which is
currently used as size parameter in snd_pcm_lib_default_mmap(). By
using the DMA buffer size (dma_bytes) instead, the complete DMA buffer
can be mmapp'ed and the issue is fixed.
This issue was detected on an ARM platform (TI AM57xx) using the RME
HDSP MADI PCIe soundcard.
Fixes: 657b1989dacf ("ALSA: pcm - Use dma_mmap_coherent() if available")
Signed-off-by: Stefan Roese <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/pcm_native.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -3424,7 +3424,7 @@ int snd_pcm_lib_default_mmap(struct snd_
area,
substream->runtime->dma_area,
substream->runtime->dma_addr,
- area->vm_end - area->vm_start);
+ substream->runtime->dma_bytes);
#endif /* CONFIG_X86 */
/* mmap with fault handler */
area->vm_ops = &snd_pcm_vm_ops_data_fault;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Westphal <[email protected]>
commit c8d70a700a5b486bfa8e5a7d33d805389f6e59f9 upstream.
ebt_among is special, it has a dynamic match size and is exempt
from the central size checks.
commit c4585a2823edf ("bridge: ebt_among: add missing match size checks")
added validation for pool size, but missed fact that the macros
ebt_among_wh_src/dst can already return out-of-bound result because
they do not check value of wh_src/dst_ofs (an offset) vs. the size
of the match that userspace gave to us.
v2:
check that offset has correct alignment.
Paolo Abeni points out that we should also check that src/dst
wormhash arrays do not overlap, and src + length lines up with
start of dst (or vice versa).
v3: compact wormhash_sizes_valid() part
NB: Fixes tag is intentionally wrong, this bug exists from day
one when match was added for 2.6 kernel. Tag is there so stable
maintainers will notice this one too.
Tested with same rules from the earlier patch.
Fixes: c4585a2823edf ("bridge: ebt_among: add missing match size checks")
Reported-by: <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bridge/netfilter/ebt_among.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
--- a/net/bridge/netfilter/ebt_among.c
+++ b/net/bridge/netfilter/ebt_among.c
@@ -177,6 +177,28 @@ static bool poolsize_invalid(const struc
return w && w->poolsize >= (INT_MAX / sizeof(struct ebt_mac_wormhash_tuple));
}
+static bool wormhash_offset_invalid(int off, unsigned int len)
+{
+ if (off == 0) /* not present */
+ return false;
+
+ if (off < (int)sizeof(struct ebt_among_info) ||
+ off % __alignof__(struct ebt_mac_wormhash))
+ return true;
+
+ off += sizeof(struct ebt_mac_wormhash);
+
+ return off > len;
+}
+
+static bool wormhash_sizes_valid(const struct ebt_mac_wormhash *wh, int a, int b)
+{
+ if (a == 0)
+ a = sizeof(struct ebt_among_info);
+
+ return ebt_mac_wormhash_size(wh) + a == b;
+}
+
static int ebt_among_mt_check(const struct xt_mtchk_param *par)
{
const struct ebt_among_info *info = par->matchinfo;
@@ -189,6 +211,10 @@ static int ebt_among_mt_check(const stru
if (expected_length > em->match_size)
return -EINVAL;
+ if (wormhash_offset_invalid(info->wh_dst_ofs, em->match_size) ||
+ wormhash_offset_invalid(info->wh_src_ofs, em->match_size))
+ return -EINVAL;
+
wh_dst = ebt_among_wh_dst(info);
if (poolsize_invalid(wh_dst))
return -EINVAL;
@@ -201,6 +227,14 @@ static int ebt_among_mt_check(const stru
if (poolsize_invalid(wh_src))
return -EINVAL;
+ if (info->wh_src_ofs < info->wh_dst_ofs) {
+ if (!wormhash_sizes_valid(wh_src, info->wh_src_ofs, info->wh_dst_ofs))
+ return -EINVAL;
+ } else {
+ if (!wormhash_sizes_valid(wh_dst, info->wh_dst_ofs, info->wh_src_ofs))
+ return -EINVAL;
+ }
+
expected_length += ebt_mac_wormhash_size(wh_src);
if (em->match_size != EBT_ALIGN(expected_length)) {
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Westphal <[email protected]>
commit b1d0a5d0cba4597c0394997b2d5fced3e3841b4e upstream.
recent and hashlimit both create /proc files, but only check that
name is 0 terminated.
This can trigger WARN() from procfs when name is "" or "/".
Add helper for this and then use it for both.
Cc: Eric Dumazet <[email protected]>
Reported-by: Eric Dumazet <[email protected]>
Reported-by: <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/netfilter/x_tables.h | 2 ++
net/netfilter/x_tables.c | 30 ++++++++++++++++++++++++++++++
net/netfilter/xt_hashlimit.c | 16 ++++++++++------
net/netfilter/xt_recent.c | 6 +++---
4 files changed, 45 insertions(+), 9 deletions(-)
--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@@ -285,6 +285,8 @@ unsigned int *xt_alloc_entry_offsets(uns
bool xt_find_jump_offset(const unsigned int *offsets,
unsigned int target, unsigned int size);
+int xt_check_proc_name(const char *name, unsigned int size);
+
int xt_check_match(struct xt_mtchk_param *, unsigned int size, u_int8_t proto,
bool inv_proto);
int xt_check_target(struct xt_tgchk_param *, unsigned int size, u_int8_t proto,
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -423,6 +423,36 @@ textify_hooks(char *buf, size_t size, un
return buf;
}
+/**
+ * xt_check_proc_name - check that name is suitable for /proc file creation
+ *
+ * @name: file name candidate
+ * @size: length of buffer
+ *
+ * some x_tables modules wish to create a file in /proc.
+ * This function makes sure that the name is suitable for this
+ * purpose, it checks that name is NUL terminated and isn't a 'special'
+ * name, like "..".
+ *
+ * returns negative number on error or 0 if name is useable.
+ */
+int xt_check_proc_name(const char *name, unsigned int size)
+{
+ if (name[0] == '\0')
+ return -EINVAL;
+
+ if (strnlen(name, size) == size)
+ return -ENAMETOOLONG;
+
+ if (strcmp(name, ".") == 0 ||
+ strcmp(name, "..") == 0 ||
+ strchr(name, '/'))
+ return -EINVAL;
+
+ return 0;
+}
+EXPORT_SYMBOL(xt_check_proc_name);
+
int xt_check_match(struct xt_mtchk_param *par,
unsigned int size, u_int8_t proto, bool inv_proto)
{
--- a/net/netfilter/xt_hashlimit.c
+++ b/net/netfilter/xt_hashlimit.c
@@ -915,8 +915,9 @@ static int hashlimit_mt_check_v1(const s
struct hashlimit_cfg3 cfg = {};
int ret;
- if (info->name[sizeof(info->name) - 1] != '\0')
- return -EINVAL;
+ ret = xt_check_proc_name(info->name, sizeof(info->name));
+ if (ret)
+ return ret;
ret = cfg_copy(&cfg, (void *)&info->cfg, 1);
@@ -933,8 +934,9 @@ static int hashlimit_mt_check_v2(const s
struct hashlimit_cfg3 cfg = {};
int ret;
- if (info->name[sizeof(info->name) - 1] != '\0')
- return -EINVAL;
+ ret = xt_check_proc_name(info->name, sizeof(info->name));
+ if (ret)
+ return ret;
ret = cfg_copy(&cfg, (void *)&info->cfg, 2);
@@ -948,9 +950,11 @@ static int hashlimit_mt_check_v2(const s
static int hashlimit_mt_check(const struct xt_mtchk_param *par)
{
struct xt_hashlimit_mtinfo3 *info = par->matchinfo;
+ int ret;
- if (info->name[sizeof(info->name) - 1] != '\0')
- return -EINVAL;
+ ret = xt_check_proc_name(info->name, sizeof(info->name));
+ if (ret)
+ return ret;
return hashlimit_mt_check_common(par, &info->hinfo, &info->cfg,
info->name, 3);
--- a/net/netfilter/xt_recent.c
+++ b/net/netfilter/xt_recent.c
@@ -361,9 +361,9 @@ static int recent_mt_check(const struct
info->hit_count, XT_RECENT_MAX_NSTAMPS - 1);
return -EINVAL;
}
- if (info->name[0] == '\0' ||
- strnlen(info->name, XT_RECENT_NAME_LEN) == XT_RECENT_NAME_LEN)
- return -EINVAL;
+ ret = xt_check_proc_name(info->name, sizeof(info->name));
+ if (ret)
+ return ret;
if (ip_pkt_list_tot && info->hit_count < ip_pkt_list_tot)
nstamp_mask = roundup_pow_of_two(ip_pkt_list_tot) - 1;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Colin Ian King <[email protected]>
commit bb0829a741792b56c908d7745bc0b2b540293bcc upstream.
Currently the driver spams the kernel log on unsupported ioctls which is
unnecessary as the ioctl returns -ENOIOCTLCMD to indicate this anyway.
I suspect this was originally for debugging purposes but it really is not
required so remove it.
Signed-off-by: Colin Ian King <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/mei/main.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/misc/mei/main.c
+++ b/drivers/misc/mei/main.c
@@ -507,7 +507,6 @@ static long mei_ioctl(struct file *file,
break;
default:
- dev_err(dev->dev, ": unsupported ioctl %d.\n", cmd);
rets = -ENOIOCTLCMD;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit 8f461b1e02ed546fbd0f11611138da67fd85a30f upstream.
With ecb-cast5-avx, if a 128+ byte scatterlist element followed a
shorter one, then the algorithm accidentally encrypted/decrypted only 8
bytes instead of the expected 128 bytes. Fix it by setting the
encryption/decryption 'fn' correctly.
Fixes: c12ab20b162c ("crypto: cast5/avx - avoid using temporary stack buffers")
Cc: <[email protected]> # v3.8+
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/crypto/cast5_avx_glue.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/arch/x86/crypto/cast5_avx_glue.c
+++ b/arch/x86/crypto/cast5_avx_glue.c
@@ -66,8 +66,6 @@ static int ecb_crypt(struct blkcipher_de
void (*fn)(struct cast5_ctx *ctx, u8 *dst, const u8 *src);
int err;
- fn = (enc) ? cast5_ecb_enc_16way : cast5_ecb_dec_16way;
-
err = blkcipher_walk_virt(desc, walk);
desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
@@ -79,6 +77,7 @@ static int ecb_crypt(struct blkcipher_de
/* Process multi-block batch */
if (nbytes >= bsize * CAST5_PARALLEL_BLOCKS) {
+ fn = (enc) ? cast5_ecb_enc_16way : cast5_ecb_dec_16way;
do {
fn(ctx, wdst, wsrc);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gaku Inami <[email protected]>
commit 9de9a449482677a75f1edd2049268a7efc40fc96 upstream.
This reverts commit 452562abb5b7 ("base: arch_topology: fix section
mismatch build warnings"). It causes the notifier call hangs in some
use-cases.
In some cases with using maxcpus, some of cpus are booted first and
then the remaining cpus are booted. As an example, some users who want
to realize fast boot up often use the following procedure.
1) Define all CPUs on device tree (CA57x4 + CA53x4)
2) Add "maxcpus=4" in bootargs
3) Kernel boot up with CA57x4
4) After kernel boot up, CA53x4 is booted from user
When kernel init was finished, CPUFREQ_POLICY_NOTIFIER was not still
unregisterd. This means that "__init init_cpu_capacity_callback()"
will be called after kernel init sequence. To avoid this problem,
it needs to remove __init{,data} annotations by reverting this commit.
Also, this commit was needed to fix kernel compile issue below.
However, this issue was also fixed by another patch: commit 82d8ba717ccb
("arch_topology: Fix section miss match warning due to
free_raw_capacity()") in v4.15 as well.
Whereas commit 452562abb5b7 added all the missing __init annotations,
commit 82d8ba717ccb removed it from free_raw_capacity().
WARNING: vmlinux.o(.text+0x548f24): Section mismatch in reference
from the function init_cpu_capacity_callback() to the variable
.init.text:$x
The function init_cpu_capacity_callback() references
the variable __init $x.
This is often because init_cpu_capacity_callback lacks a __init
annotation or the annotation of $x is wrong.
Fixes: 82d8ba717ccb ("arch_topology: Fix section miss match warning due to free_raw_capacity()")
Cc: stable <[email protected]>
Signed-off-by: Gaku Inami <[email protected]>
Reviewed-by: Dietmar Eggemann <[email protected]>
Tested-by: Dietmar Eggemann <[email protected]>
Acked-by: Sudeep Holla <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/arch_topology.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/base/arch_topology.c
+++ b/drivers/base/arch_topology.c
@@ -166,11 +166,11 @@ bool __init topology_parse_cpu_capacity(
}
#ifdef CONFIG_CPU_FREQ
-static cpumask_var_t cpus_to_visit __initdata;
-static void __init parsing_done_workfn(struct work_struct *work);
-static __initdata DECLARE_WORK(parsing_done_work, parsing_done_workfn);
+static cpumask_var_t cpus_to_visit;
+static void parsing_done_workfn(struct work_struct *work);
+static DECLARE_WORK(parsing_done_work, parsing_done_workfn);
-static int __init
+static int
init_cpu_capacity_callback(struct notifier_block *nb,
unsigned long val,
void *data)
@@ -206,7 +206,7 @@ init_cpu_capacity_callback(struct notifi
return 0;
}
-static struct notifier_block init_cpu_capacity_notifier __initdata = {
+static struct notifier_block init_cpu_capacity_notifier = {
.notifier_call = init_cpu_capacity_callback,
};
@@ -232,7 +232,7 @@ static int __init register_cpufreq_notif
}
core_initcall(register_cpufreq_notifier);
-static void __init parsing_done_workfn(struct work_struct *work)
+static void parsing_done_workfn(struct work_struct *work)
{
cpufreq_unregister_notifier(&init_cpu_capacity_notifier,
CPUFREQ_POLICY_NOTIFIER);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ondrej Zary <[email protected]>
commit 04bb1719c4de94700056241d4c0fe3c1413f5aff upstream.
The touch sensor buttons on Sony VAIO VGN-CS series laptops (e.g.
VGN-CS31S) are a separate PS/2 device. As the MUX is disabled for all
VAIO machines by the nomux blacklist, the data from touch sensor
buttons and touchpad are combined. The protocol used by the buttons is
probably similar to the touchpad protocol (both are Synaptics) so both
devices get enabled. The controller combines the data, creating a mess
which results in random button clicks, touchpad stopping working and
lost sync error messages:
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: issuing reconnect request
Add a new i8042_dmi_forcemux_table whitelist with VGN-CS.
With MUX enabled, touch sensor buttons are detected as separate device
(and left disabled as there's currently no driver), fixing all touchpad
problems.
Signed-off-by: Ondrej Zary <[email protected]>
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/serio/i8042-x86ia64io.h | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -530,6 +530,20 @@ static const struct dmi_system_id __init
{ }
};
+static const struct dmi_system_id i8042_dmi_forcemux_table[] __initconst = {
+ {
+ /*
+ * Sony Vaio VGN-CS series require MUX or the touch sensor
+ * buttons will disturb touchpad operation
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-CS"),
+ },
+ },
+ { }
+};
+
/*
* On some Asus laptops, just running self tests cause problems.
*/
@@ -1170,6 +1184,9 @@ static int __init i8042_platform_init(vo
if (dmi_check_system(i8042_dmi_nomux_table))
i8042_nomux = true;
+ if (dmi_check_system(i8042_dmi_forcemux_table))
+ i8042_nomux = false;
+
if (dmi_check_system(i8042_dmi_notimeout_table))
i8042_notimeout = true;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Greg Kroah-Hartman <[email protected]>
This reverts commit 0ed43f944a4070d04eddacded8629d0ddb9c8003 which was
comit e153db03c6b7a035c797bcdf35262586f003ee93 upstream.
It requires a driver that was not merged until 4.16, so remove it from
this stable tree as it is pointless.
Reported-by: Ben Hutchings <[email protected]>
Cc: Andrew F. Davis <[email protected]>
Cc: Tony Lindgren <[email protected]>
Cc: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/am335x-pepper.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -139,7 +139,7 @@
&audio_codec {
status = "okay";
- reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+ gpio-reset = <&gpio1 16 GPIO_ACTIVE_LOW>;
AVDD-supply = <&ldo3_reg>;
IOVDD-supply = <&ldo3_reg>;
DRVDD-supply = <&ldo3_reg>;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Greg Kroah-Hartman <[email protected]>
This reverts commit 2f1f60c4b903f0f5464560783655ff74c9663a92 which was
commit 7be4b5dc7ffa9499ac6ef33a5ffa9ff43f9b7057 upstream.
It requires a driver that was not merged until 4.16, so remove it from
this stable tree as it is pointless.
Reported-by: Ben Hutchings <[email protected]>
Cc: Andrew F. Davis <[email protected]>
Cc: Tony Lindgren <[email protected]>
Cc: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/omap3-n900.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -558,7 +558,7 @@
tlv320aic3x: tlv320aic3x@18 {
compatible = "ti,tlv320aic3x";
reg = <0x18>;
- reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
+ gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
ai3x-gpio-func = <
0 /* AIC3X_GPIO1_FUNC_DISABLED */
5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
@@ -575,7 +575,7 @@
tlv320aic3x_aux: tlv320aic3x@19 {
compatible = "ti,tlv320aic3x";
reg = <0x19>;
- reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
+ gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
AVDD-supply = <&vmmc2>;
DRVDD-supply = <&vmmc2>;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Keerthy <[email protected]>
commit aac4619d028e2c444ac1217fc2d05b0322079dff upstream.
Set powerhold property for tps65917
Signed-off-by: Keerthy <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Cc: Ben Hutchings <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/dra76-evm.dts | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -148,6 +148,7 @@
compatible = "ti,tps65917";
reg = <0x58>;
ti,system-power-controller;
+ ti,palmas-override-powerhold;
interrupt-controller;
#interrupt-cells = <2>;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Greg Kroah-Hartman <[email protected]>
This reverts commit e6cfc525163ea3375113a9dcc234c2cdd8dbf643 which is
commit 53c81e95df1793933f87748d36070a721f6cb287 upstream.
Ben writes that there are a number of follow-on patches needed to fix
this up, but they get complex to backport, and some custom fixes are
needed, so let's just revert this and wait for a "real" set of patches
to resolve this to be submitted if it is really needed.
Reported-by: Ben Hutchings <[email protected]>
Cc: Petr Vorel <[email protected]>
Cc: Alexey Kodanev <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Stefano Brivio <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6_vti.c | 20 --------------------
1 file changed, 20 deletions(-)
--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -626,7 +626,6 @@ static void vti6_link_config(struct ip6_
{
struct net_device *dev = t->dev;
struct __ip6_tnl_parm *p = &t->parms;
- struct net_device *tdev = NULL;
memcpy(dev->dev_addr, &p->laddr, sizeof(struct in6_addr));
memcpy(dev->broadcast, &p->raddr, sizeof(struct in6_addr));
@@ -639,25 +638,6 @@ static void vti6_link_config(struct ip6_
dev->flags |= IFF_POINTOPOINT;
else
dev->flags &= ~IFF_POINTOPOINT;
-
- if (p->flags & IP6_TNL_F_CAP_XMIT) {
- int strict = (ipv6_addr_type(&p->raddr) &
- (IPV6_ADDR_MULTICAST | IPV6_ADDR_LINKLOCAL));
- struct rt6_info *rt = rt6_lookup(t->net,
- &p->raddr, &p->laddr,
- p->link, strict);
-
- if (rt)
- tdev = rt->dst.dev;
- ip6_rt_put(rt);
- }
-
- if (!tdev && p->link)
- tdev = __dev_get_by_index(t->net, p->link);
-
- if (tdev)
- dev->mtu = max_t(int, tdev->mtu - dev->hard_header_len,
- IPV6_MIN_MTU);
}
/**
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Joel Stanley <[email protected]>
commit f597fbce38d230af95384f4a04e0a13a1d0ad45d upstream.
The Nuvoton UART is almost compatible with the 8250 driver when probed
via the 8250_of driver, however it requires some extra configuration
at startup.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Joel Stanley <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/serial/8250.txt | 1
drivers/tty/serial/8250/8250_of.c | 1
drivers/tty/serial/8250/8250_port.c | 33 ++++++++++++++++++++++
include/uapi/linux/serial_core.h | 3 ++
4 files changed, 38 insertions(+)
--- a/Documentation/devicetree/bindings/serial/8250.txt
+++ b/Documentation/devicetree/bindings/serial/8250.txt
@@ -24,6 +24,7 @@ Required properties:
- "ti,da830-uart"
- "aspeed,ast2400-vuart"
- "aspeed,ast2500-vuart"
+ - "nuvoton,npcm750-uart"
- "serial" if the port type is unknown.
- reg : offset and length of the register set for the device.
- interrupts : should contain uart interrupt.
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -321,6 +321,7 @@ static const struct of_device_id of_plat
{ .compatible = "mrvl,mmp-uart",
.data = (void *)PORT_XSCALE, },
{ .compatible = "ti,da830-uart", .data = (void *)PORT_DA830, },
+ { .compatible = "nuvoton,npcm750-uart", .data = (void *)PORT_NPCM, },
{ /* end of list */ },
};
MODULE_DEVICE_TABLE(of, of_platform_serial_table);
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -51,6 +51,10 @@
#define UART_EXAR_SLEEP 0x8b /* Sleep mode */
#define UART_EXAR_DVID 0x8d /* Device identification */
+/* Nuvoton NPCM timeout register */
+#define UART_NPCM_TOR 7
+#define UART_NPCM_TOIE BIT(7) /* Timeout Interrupt Enable */
+
/*
* Debugging.
*/
@@ -297,6 +301,15 @@ static const struct serial8250_config ua
UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
.flags = UART_CAP_FIFO,
},
+ [PORT_NPCM] = {
+ .name = "Nuvoton 16550",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
+ .rxtrig_bytes = {1, 4, 8, 14},
+ .flags = UART_CAP_FIFO,
+ },
};
/* Uart divisor latch read */
@@ -2168,6 +2181,15 @@ int serial8250_do_startup(struct uart_po
UART_DA830_PWREMU_MGMT_FREE);
}
+ if (port->type == PORT_NPCM) {
+ /*
+ * Nuvoton calls the scratch register 'UART_TOR' (timeout
+ * register). Enable it, and set TIOC (timeout interrupt
+ * comparator) to be 0x20 for correct operation.
+ */
+ serial_port_out(port, UART_NPCM_TOR, UART_NPCM_TOIE | 0x20);
+ }
+
#ifdef CONFIG_SERIAL_8250_RSA
/*
* If this is an RSA port, see if we can kick it up to the
@@ -2490,6 +2512,15 @@ static unsigned int xr17v35x_get_divisor
return quot_16 >> 4;
}
+/* Nuvoton NPCM UARTs have a custom divisor calculation */
+static unsigned int npcm_get_divisor(struct uart_8250_port *up,
+ unsigned int baud)
+{
+ struct uart_port *port = &up->port;
+
+ return DIV_ROUND_CLOSEST(port->uartclk, 16 * baud + 2) - 2;
+}
+
static unsigned int serial8250_get_divisor(struct uart_8250_port *up,
unsigned int baud,
unsigned int *frac)
@@ -2510,6 +2541,8 @@ static unsigned int serial8250_get_divis
quot = 0x8002;
else if (up->port.type == PORT_XR17V35X)
quot = xr17v35x_get_divisor(up, baud, frac);
+ else if (up->port.type == PORT_NPCM)
+ quot = npcm_get_divisor(up, baud);
else
quot = uart_get_divisor(port, baud);
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -76,6 +76,9 @@
#define PORT_SUNZILOG 38
#define PORT_SUNSAB 39
+/* Nuvoton UART */
+#define PORT_NPCM 40
+
/* Intel EG20 */
#define PORT_PCH_8LINE 44
#define PORT_PCH_2LINE 45
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Abeni <[email protected]>
commit aebfa52a925d701114afd6af0def35bab16d4f47 upstream.
The ipv4 nf_ct code currently skips the nf_conntrak_in() call
for fragmented packets. As a results later matches/target can end
up manipulating template ct entry instead of 'real' ones.
Exploiting the above, syzbot found a way to trigger the following
splat:
WARNING: CPU: 1 PID: 4242 at net/netfilter/xt_cluster.c:55
xt_cluster_mt+0x6c1/0x840 net/netfilter/xt_cluster.c:127
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 4242 Comm: syzkaller027971 Not tainted 4.16.0-rc2+ #243
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x24d lib/dump_stack.c:53
panic+0x1e4/0x41c kernel/panic.c:183
__warn+0x1dc/0x200 kernel/panic.c:547
report_bug+0x211/0x2d0 lib/bug.c:184
fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178
fixup_bug arch/x86/kernel/traps.c:247 [inline]
do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296
do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315
invalid_op+0x58/0x80 arch/x86/entry/entry_64.S:957
RIP: 0010:xt_cluster_hash net/netfilter/xt_cluster.c:55 [inline]
RIP: 0010:xt_cluster_mt+0x6c1/0x840 net/netfilter/xt_cluster.c:127
RSP: 0018:ffff8801d2f6f2d0 EFLAGS: 00010293
RAX: ffff8801af700540 RBX: 0000000000000000 RCX: ffffffff84a2d1e1
RDX: 0000000000000000 RSI: ffff8801d2f6f478 RDI: ffff8801cafd336a
RBP: ffff8801d2f6f2e8 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801b03b3d18
R13: ffff8801cafd3300 R14: dffffc0000000000 R15: ffff8801d2f6f478
ipt_do_table+0xa91/0x19b0 net/ipv4/netfilter/ip_tables.c:296
iptable_filter_hook+0x65/0x80 net/ipv4/netfilter/iptable_filter.c:41
nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline]
nf_hook_slow+0xba/0x1a0 net/netfilter/core.c:483
nf_hook include/linux/netfilter.h:243 [inline]
NF_HOOK include/linux/netfilter.h:286 [inline]
raw_send_hdrinc.isra.17+0xf39/0x1880 net/ipv4/raw.c:432
raw_sendmsg+0x14cd/0x26b0 net/ipv4/raw.c:669
inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:763
sock_sendmsg_nosec net/socket.c:629 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:639
SYSC_sendto+0x361/0x5c0 net/socket.c:1748
SyS_sendto+0x40/0x50 net/socket.c:1716
do_syscall_64+0x280/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x441b49
RSP: 002b:00007ffff5ca8b18 EFLAGS: 00000216 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000441b49
RDX: 0000000000000030 RSI: 0000000020ff7000 RDI: 0000000000000003
RBP: 00000000006cc018 R08: 000000002066354c R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000216 R12: 0000000000403470
R13: 0000000000403500 R14: 0000000000000000 R15: 0000000000000000
Dumping ftrace buffer:
(ftrace buffer empty)
Kernel Offset: disabled
Rebooting in 86400 seconds..
Instead of adding checks for template ct on every target/match
manipulating skb->_nfct, simply drop the template ct when skipping
nf_conntrack_in().
Fixes: 7b4fdf77a450ec ("netfilter: don't track fragmented packets")
Reported-and-tested-by: [email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Acked-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
@@ -159,8 +159,20 @@ static unsigned int ipv4_conntrack_local
ip_hdrlen(skb) < sizeof(struct iphdr))
return NF_ACCEPT;
- if (ip_is_fragment(ip_hdr(skb))) /* IP_NODEFRAG setsockopt set */
+ if (ip_is_fragment(ip_hdr(skb))) { /* IP_NODEFRAG setsockopt set */
+ enum ip_conntrack_info ctinfo;
+ struct nf_conn *tmpl;
+
+ tmpl = nf_ct_get(skb, &ctinfo);
+ if (tmpl && nf_ct_is_template(tmpl)) {
+ /* when skipping ct, clear templates to avoid fooling
+ * later targets/matches
+ */
+ skb->_nfct = 0;
+ nf_ct_put(tmpl);
+ }
return NF_ACCEPT;
+ }
return nf_conntrack_in(state->net, PF_INET, state->hook, skb);
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 1f1e82f74c0947e40144688c9e36abe4b3999f49 upstream.
Add device id for ELDAT Easywave RX09 tranceiver.
Reported-by: Jan Jansen <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/cp210x.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -158,6 +158,7 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(0x12B8, 0xEC62) }, /* Link G4+ ECU */
{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
+ { USB_DEVICE(0x155A, 0x1006) }, /* ELDAT Easywave RX09 */
{ USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */
{ USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */
{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Clemens Werther <[email protected]>
commit 6555ad13a01952c16485c82a52ad1f3e07e34b3a upstream.
Add device id for Harman FirmwareHubEmulator to make the device
auto-detectable by the driver.
Signed-off-by: Clemens Werther <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/ftdi_sio.c | 1 +
drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++
2 files changed, 7 insertions(+)
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -936,6 +936,7 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CINTERION_MC55I_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_FHE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1445,6 +1445,12 @@
#define FTDI_CINTERION_MC55I_PID 0xA951
/*
+ * Product: FirmwareHubEmulator
+ * Manufacturer: Harman Becker Automotive Systems
+ */
+#define FTDI_FHE_PID 0xA9A0
+
+/*
* Product: Comet Caller ID decoder
* Manufacturer: Crucible Technologies
*/
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Greg Kroah-Hartman <[email protected]>
This reverts commit 0049457bfde661cf47410eaacad65845c9a2bb45 which was
commit a8b149d32b663c1a4105273295184b78f53d33cf upstream.
The backport was not correct, so just drop it entirely.
Reported-by: Ben Hutchings <[email protected]>
Cc: Rafael J. Wysocki <[email protected]>
Cc: Viresh Kumar <[email protected]>
Cc: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cpufreq/cpufreq.c | 6 ------
1 file changed, 6 deletions(-)
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -631,8 +631,6 @@ static int cpufreq_parse_governor(char *
*governor = t;
err = 0;
}
- if (t && !try_module_get(t->owner))
- t = NULL;
mutex_unlock(&cpufreq_governor_mutex);
}
@@ -761,10 +759,6 @@ static ssize_t store_scaling_governor(st
return -EINVAL;
ret = cpufreq_set_policy(policy, &new_policy);
-
- if (new_policy.governor)
- module_put(new_policy.governor->owner);
-
return ret ? ret : count;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Major Hayden <[email protected]>
commit 9608e5c0f079390473b484ef92334dfd3431bb89 upstream.
This patch adds a device ID for the RT Systems cable used to
program Yaesu VX-8R/VX-8DR handheld radios. It uses the main
FTDI VID instead of the common RT Systems VID.
Signed-off-by: Major Hayden <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/ftdi_sio.c | 1 +
drivers/usb/serial/ftdi_sio_ids.h | 3 +++
2 files changed, 4 insertions(+)
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -773,6 +773,7 @@ static const struct usb_device_id id_tab
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
{ USB_DEVICE(NOVITUS_VID, NOVITUS_BONO_E_PID) },
+ { USB_DEVICE(FTDI_VID, RTSYSTEMS_USB_VX8_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S03_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_59_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57A_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -923,6 +923,9 @@
/*
* RT Systems programming cables for various ham radios
*/
+/* This device uses the VID of FTDI */
+#define RTSYSTEMS_USB_VX8_PID 0x9e50 /* USB-VX8 USB to 7 pin modular plug for Yaesu VX-8 radio */
+
#define RTSYSTEMS_VID 0x2100 /* Vendor ID */
#define RTSYSTEMS_USB_S03_PID 0x9001 /* RTS-03 USB to Serial Adapter */
#define RTSYSTEMS_USB_59_PID 0x9e50 /* USB-59 USB to 8 pin plug */
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Omar Sandoval <[email protected]>
commit 21035965f60b0502fc6537b232839389bb4ce664 upstream.
Commit 2a98dc028f91 ("include/linux/bitmap.h: turn bitmap_set and
bitmap_clear into memset when possible") introduced an optimization to
bitmap_{set,clear}() which uses memset() when the start and length are
constants aligned to a byte.
This is wrong on big-endian systems; our bitmaps are arrays of unsigned
long, so bit n is not at byte n / 8 in memory. This was caught by the
Btrfs selftests, but the bitmap selftests also fail when run on a
big-endian machine.
We can still use memset if the start and length are aligned to an
unsigned long, so do that on big-endian. The same problem applies to
the memcmp in bitmap_equal(), so fix it there, too.
Fixes: 2a98dc028f91 ("include/linux/bitmap.h: turn bitmap_set and bitmap_clear into memset when possible")
Fixes: 2c6deb01525a ("bitmap: use memcmp optimisation in more situations")
Cc: [email protected]
Reported-by: "Erhard F." <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Signed-off-by: Omar Sandoval <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/bitmap.h | 22 +++++++++++++++++-----
1 file changed, 17 insertions(+), 5 deletions(-)
--- a/include/linux/bitmap.h
+++ b/include/linux/bitmap.h
@@ -262,12 +262,20 @@ static inline void bitmap_complement(uns
__bitmap_complement(dst, src, nbits);
}
+#ifdef __LITTLE_ENDIAN
+#define BITMAP_MEM_ALIGNMENT 8
+#else
+#define BITMAP_MEM_ALIGNMENT (8 * sizeof(unsigned long))
+#endif
+#define BITMAP_MEM_MASK (BITMAP_MEM_ALIGNMENT - 1)
+
static inline int bitmap_equal(const unsigned long *src1,
const unsigned long *src2, unsigned int nbits)
{
if (small_const_nbits(nbits))
return !((*src1 ^ *src2) & BITMAP_LAST_WORD_MASK(nbits));
- if (__builtin_constant_p(nbits & 7) && IS_ALIGNED(nbits, 8))
+ if (__builtin_constant_p(nbits & BITMAP_MEM_MASK) &&
+ IS_ALIGNED(nbits, BITMAP_MEM_ALIGNMENT))
return !memcmp(src1, src2, nbits / 8);
return __bitmap_equal(src1, src2, nbits);
}
@@ -318,8 +326,10 @@ static __always_inline void bitmap_set(u
{
if (__builtin_constant_p(nbits) && nbits == 1)
__set_bit(start, map);
- else if (__builtin_constant_p(start & 7) && IS_ALIGNED(start, 8) &&
- __builtin_constant_p(nbits & 7) && IS_ALIGNED(nbits, 8))
+ else if (__builtin_constant_p(start & BITMAP_MEM_MASK) &&
+ IS_ALIGNED(start, BITMAP_MEM_ALIGNMENT) &&
+ __builtin_constant_p(nbits & BITMAP_MEM_MASK) &&
+ IS_ALIGNED(nbits, BITMAP_MEM_ALIGNMENT))
memset((char *)map + start / 8, 0xff, nbits / 8);
else
__bitmap_set(map, start, nbits);
@@ -330,8 +340,10 @@ static __always_inline void bitmap_clear
{
if (__builtin_constant_p(nbits) && nbits == 1)
__clear_bit(start, map);
- else if (__builtin_constant_p(start & 7) && IS_ALIGNED(start, 8) &&
- __builtin_constant_p(nbits & 7) && IS_ALIGNED(nbits, 8))
+ else if (__builtin_constant_p(start & BITMAP_MEM_MASK) &&
+ IS_ALIGNED(start, BITMAP_MEM_ALIGNMENT) &&
+ __builtin_constant_p(nbits & BITMAP_MEM_MASK) &&
+ IS_ALIGNED(nbits, BITMAP_MEM_ALIGNMENT))
memset((char *)map + start / 8, 0, nbits / 8);
else
__bitmap_clear(map, start, nbits);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: John Stultz <[email protected]>
commit d2471d4a24dfbff5e463d382e2c6fec7d7e25a09 upstream.
In the earlier commit dad3f793f20f ("usb: dwc2: Make sure we
disconnect the gadget state"), I was trying to fix up the
fact that we somehow weren't disconnecting the gadget state,
so that when the OTG port was plugged in the second time we
would get warnings about the state tracking being wrong.
(This seems to be due to a quirk of the HiKey board where
we do not ever get any otg interrupts, particularly the session
end detected signal. Instead we only see status change
interrupt.)
The fix there was somewhat simple, as it just made sure to
call dwc2_hsotg_disconnect() before we connected things up
in OTG mode, ensuring the state handling didn't throw errors.
But in looking at a different issue I was seeing with UDC
state handling, I realized that it would be much better
to call dwc2_hsotg_disconnect when we get the state change
signal moving to host mode.
Thus, this patch removes the earlier disconnect call I added
and moves it (and the needed locking) to the host mode
transition.
Cc: Wei Xu <[email protected]>
Cc: Guodong Xu <[email protected]>
Cc: Amit Pundir <[email protected]>
Cc: YongQin Liu <[email protected]>
Cc: John Youn <[email protected]>
Cc: Minas Harutyunyan <[email protected]>
Cc: Douglas Anderson <[email protected]>
Cc: Chen Yu <[email protected]>
Cc: Felipe Balbi <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: [email protected]
Acked-by: Minas Harutyunyan <[email protected]>
Tested-by: Minas Harutyunyan <[email protected]>
Signed-off-by: John Stultz <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Cc: Ben Hutchings <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc2/hcd.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -3277,7 +3277,6 @@ static void dwc2_conn_id_status_change(s
dwc2_core_init(hsotg, false);
dwc2_enable_global_interrupts(hsotg);
spin_lock_irqsave(&hsotg->lock, flags);
- dwc2_hsotg_disconnect(hsotg);
dwc2_hsotg_core_init_disconnected(hsotg, false);
spin_unlock_irqrestore(&hsotg->lock, flags);
dwc2_hsotg_core_connect(hsotg);
@@ -3296,8 +3295,12 @@ host:
if (count > 250)
dev_err(hsotg->dev,
"Connection id status change timed out\n");
- hsotg->op_state = OTG_STATE_A_HOST;
+ spin_lock_irqsave(&hsotg->lock, flags);
+ dwc2_hsotg_disconnect(hsotg);
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+
+ hsotg->op_state = OTG_STATE_A_HOST;
/* Initialize the Core for Host mode */
dwc2_core_init(hsotg, false);
dwc2_enable_global_interrupts(hsotg);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthias Brugger <[email protected]>
commit d61d263c8d82db7c4404a29ebc29674b1c0c05c9 upstream.
The driver implementation returns support for private flags, while
no private flags are present. When asked for the number of private
flags it returns the number of statistic flag names.
Fix this by returning EOPNOTSUPP for not implemented ethtool flags.
Signed-off-by: Matthias Brugger <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Cc: Ben Hutchings <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c | 2 +-
drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c | 2 +-
drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c | 2 +-
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 4 +++-
4 files changed, 6 insertions(+), 4 deletions(-)
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c
@@ -666,7 +666,7 @@ static void hns_gmac_get_strings(u32 str
static int hns_gmac_get_sset_count(int stringset)
{
- if (stringset == ETH_SS_STATS || stringset == ETH_SS_PRIV_FLAGS)
+ if (stringset == ETH_SS_STATS)
return ARRAY_SIZE(g_gmac_stats_string);
return 0;
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c
@@ -422,7 +422,7 @@ void hns_ppe_update_stats(struct hns_ppe
int hns_ppe_get_sset_count(int stringset)
{
- if (stringset == ETH_SS_STATS || stringset == ETH_SS_PRIV_FLAGS)
+ if (stringset == ETH_SS_STATS)
return ETH_PPE_STATIC_NUM;
return 0;
}
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c
@@ -876,7 +876,7 @@ void hns_rcb_get_stats(struct hnae_queue
*/
int hns_rcb_get_ring_sset_count(int stringset)
{
- if (stringset == ETH_SS_STATS || stringset == ETH_SS_PRIV_FLAGS)
+ if (stringset == ETH_SS_STATS)
return HNS_RING_STATIC_REG_NUM;
return 0;
--- a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
@@ -993,8 +993,10 @@ int hns_get_sset_count(struct net_device
cnt--;
return cnt;
- } else {
+ } else if (stringset == ETH_SS_STATS) {
return (HNS_NET_STATS_CNT + ops->get_sset_count(h, stringset));
+ } else {
+ return -EOPNOTSUPP;
}
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <[email protected]>
commit bd5c4facf59648581d2f1692dad7b107bf429954 upstream.
I'm getting a slab named "biovec-(1<<(21-12))". It is caused by unintended
expansion of the macro BIO_MAX_PAGES. This patch renames it to biovec-max.
Signed-off-by: Mikulas Patocka <[email protected]>
Cc: [email protected] # v4.14+
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/bio.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/block/bio.c
+++ b/block/bio.c
@@ -43,9 +43,9 @@
* break badly! cannot be bigger than what you can fit into an
* unsigned short
*/
-#define BV(x) { .nr_vecs = x, .name = "biovec-"__stringify(x) }
+#define BV(x, n) { .nr_vecs = x, .name = "biovec-"#n }
static struct biovec_slab bvec_slabs[BVEC_POOL_NR] __read_mostly = {
- BV(1), BV(4), BV(16), BV(64), BV(128), BV(BIO_MAX_PAGES),
+ BV(1, 1), BV(4, 4), BV(16, 16), BV(64, 64), BV(128, 128), BV(BIO_MAX_PAGES, max),
};
#undef BV
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Szymon Janc <[email protected]>
commit 64e759f58f128730b97a3c3a26d283c075ad7c86 upstream.
If Security Request is received on connection that is already encrypted
with sufficient security master should perform encryption key refresh
procedure instead of just ignoring Slave Security Request
(Core Spec 5.0 Vol 3 Part H 2.4.6).
> ACL Data RX: Handle 3585 flags 0x02 dlen 6
SMP: Security Request (0x0b) len 1
Authentication requirement: Bonding, No MITM, SC, No Keypresses (0x09)
< HCI Command: LE Start Encryption (0x08|0x0019) plen 28
Handle: 3585
Random number: 0x0000000000000000
Encrypted diversifier: 0x0000
Long term key: 44264272a5c426a9e868f034cf0e69f3
> HCI Event: Command Status (0x0f) plen 4
LE Start Encryption (0x08|0x0019) ncmd 1
Status: Success (0x00)
> HCI Event: Encryption Key Refresh Complete (0x30) plen 3
Status: Success (0x00)
Handle: 3585
Signed-off-by: Szymon Janc <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bluetooth/smp.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/net/bluetooth/smp.c
+++ b/net/bluetooth/smp.c
@@ -2287,8 +2287,14 @@ static u8 smp_cmd_security_req(struct l2
else
sec_level = authreq_to_seclevel(auth);
- if (smp_sufficient_security(hcon, sec_level, SMP_USE_LTK))
+ if (smp_sufficient_security(hcon, sec_level, SMP_USE_LTK)) {
+ /* If link is already encrypted with sufficient security we
+ * still need refresh encryption as per Core Spec 5.0 Vol 3,
+ * Part H 2.4.6
+ */
+ smp_ltk_encrypt(conn, hcon->sec_level);
return 0;
+ }
if (sec_level > hcon->pending_sec_level)
hcon->pending_sec_level = sec_level;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Frysinger <[email protected]>
commit 65d9982d7e523a1a8e7c9af012da0d166f72fc56 upstream.
ECMA-48 [1] (aka ISO 6429) has defined SGR 21 as "doubly underlined"
since at least March 1984. The Linux kernel has treated it as SGR 22
"normal intensity" since it was added in Linux-0.96b in June 1992.
Before that, it was simply ignored. Other terminal emulators have
either ignored it, or treat it as double underline now. xterm for
example added support in its 304 release (May 2014) [2] where it was
previously ignoring it.
Changing this behavior shouldn't be an issue:
- It isn't a named capability in ncurses's terminfo database, so no
script is using libtinfo/libcurses to look this up, or using tput
to query & output the right sequence.
- Any script assuming SGR 21 will reset intensity in all terminals
already do not work correctly on non-Linux VTs (including running
under screen/tmux/etc...).
- If someone has written a script that only runs in the Linux VT, and
they're using SGR 21 (instead of SGR 22), the output should still
be readable.
imo it's important to change this as the Linux VT's non-conformance
is sometimes used as an argument for other terminal emulators to not
implement SGR 21 at all, or do so incorrectly.
[1]: https://www.ecma-international.org/publications/standards/Ecma-048.htm
[2]: https://github.com/ThomasDickey/xterm-snapshots/commit/2fd29cb98d214cb536bcafbee00bc73b3f1eeb9d
Signed-off-by: Mike Frysinger <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/vt/vt.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -1352,6 +1352,11 @@ static void csi_m(struct vc_data *vc)
case 3:
vc->vc_italic = 1;
break;
+ case 21:
+ /*
+ * No console drivers support double underline, so
+ * convert it to a single underline.
+ */
case 4:
vc->vc_underline = 1;
break;
@@ -1387,7 +1392,6 @@ static void csi_m(struct vc_data *vc)
vc->vc_disp_ctrl = 1;
vc->vc_toggle_meta = 1;
break;
- case 21:
case 22:
vc->vc_intensity = 1;
break;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Masaki Ota <[email protected]>
commit 567b9b549cfa1cbc202762ae97b5385c29ade1e3 upstream.
The primary interface for the touchpad device in Thinkpad L570 is SMBus,
so ALPS overlooked PS2 interface Firmware setting of TrackStick, and
shipped with TrackStick otp bit is disabled.
The address 0xD7 contains device number information, so we can identify
the device by checking this value, but to access it we need to enable
Command mode, and then re-enable the device. Devices shipped in Thinkpad
L570 report either 0x0C or 0x1D as device numbers, if we see them we assume
that the devices are DualPoints.
The same issue exists on Dell Latitude 7370.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196929
Fixes: 646580f793 ("Input: ALPS - fix multi-touch decoding on SS4 plus touchpads")
Signed-off-by: Masaki Ota <[email protected]>
Tested-by: Aaron Ma <[email protected]>
Tested-by: Jonathan Liu <[email protected]>
Tested-by: Jaak Ristioja <[email protected]>
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/mouse/alps.c | 24 +++++++++++++++++++++---
1 file changed, 21 insertions(+), 3 deletions(-)
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -2544,13 +2544,31 @@ static int alps_update_btn_info_ss4_v2(u
}
static int alps_update_dual_info_ss4_v2(unsigned char otp[][4],
- struct alps_data *priv)
+ struct alps_data *priv,
+ struct psmouse *psmouse)
{
bool is_dual = false;
+ int reg_val = 0;
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
- if (IS_SS4PLUS_DEV(priv->dev_id))
+ if (IS_SS4PLUS_DEV(priv->dev_id)) {
is_dual = (otp[0][0] >> 4) & 0x01;
+ if (!is_dual) {
+ /* For support TrackStick of Thinkpad L/E series */
+ if (alps_exit_command_mode(psmouse) == 0 &&
+ alps_enter_command_mode(psmouse) == 0) {
+ reg_val = alps_command_mode_read_reg(psmouse,
+ 0xD7);
+ }
+ alps_exit_command_mode(psmouse);
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE);
+
+ if (reg_val == 0x0C || reg_val == 0x1D)
+ is_dual = true;
+ }
+ }
+
if (is_dual)
priv->flags |= ALPS_DUALPOINT |
ALPS_DUALPOINT_WITH_PRESSURE;
@@ -2573,7 +2591,7 @@ static int alps_set_defaults_ss4_v2(stru
alps_update_btn_info_ss4_v2(otp, priv);
- alps_update_dual_info_ss4_v2(otp, priv);
+ alps_update_dual_info_ss4_v2(otp, priv, psmouse);
return 0;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Frank Mori Hess <[email protected]>
commit e1d9fc04c41840a4688ef6ce90b6dcca157ea4d7 upstream.
Ack ai fifo error interrupts in interrupt handler to clear interrupt
after fifo overflow. It should prevent lock-ups after the ai fifo
overflows.
Cc: <[email protected]> # v4.2+
Signed-off-by: Frank Mori Hess <[email protected]>
Signed-off-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/comedi/drivers/ni_mio_common.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -1284,6 +1284,8 @@ static void ack_a_interrupt(struct comed
ack |= NISTC_INTA_ACK_AI_START;
if (a_status & NISTC_AI_STATUS1_STOP)
ack |= NISTC_INTA_ACK_AI_STOP;
+ if (a_status & NISTC_AI_STATUS1_OVER)
+ ack |= NISTC_INTA_ACK_AI_ERR;
if (ack)
ni_stc_writew(dev, ack, NISTC_INTA_ACK_REG);
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Liu Bo <[email protected]>
commit 5811375325420052fcadd944792a416a43072b7f upstream.
Fstests generic/475 provides a way to fail metadata reads while
checking if checksum exists for the inode inside run_delalloc_nocow(),
and csum_exist_in_range() interprets error (-EIO) as inode having
checksum and makes its caller enter the cow path.
In case of free space inode, this ends up with a warning in
cow_file_range().
The same problem applies to btrfs_cross_ref_exist() since it may also
read metadata in between.
With this, run_delalloc_nocow() bails out when errors occur at the two
places.
cc: <[email protected]> v2.6.28+
Fixes: 17d217fe970d ("Btrfs: fix nodatasum handling in balancing code")
Signed-off-by: Liu Bo <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/inode.c | 37 ++++++++++++++++++++++++++++++++-----
1 file changed, 32 insertions(+), 5 deletions(-)
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -1257,6 +1257,8 @@ static noinline int csum_exist_in_range(
list_del(&sums->list);
kfree(sums);
}
+ if (ret < 0)
+ return ret;
return 1;
}
@@ -1389,10 +1391,23 @@ next_slot:
goto out_check;
if (btrfs_extent_readonly(fs_info, disk_bytenr))
goto out_check;
- if (btrfs_cross_ref_exist(root, ino,
- found_key.offset -
- extent_offset, disk_bytenr))
+ ret = btrfs_cross_ref_exist(root, ino,
+ found_key.offset -
+ extent_offset, disk_bytenr);
+ if (ret) {
+ /*
+ * ret could be -EIO if the above fails to read
+ * metadata.
+ */
+ if (ret < 0) {
+ if (cow_start != (u64)-1)
+ cur_offset = cow_start;
+ goto error;
+ }
+
+ WARN_ON_ONCE(nolock);
goto out_check;
+ }
disk_bytenr += extent_offset;
disk_bytenr += cur_offset - found_key.offset;
num_bytes = min(end + 1, extent_end) - cur_offset;
@@ -1410,10 +1425,22 @@ next_slot:
* this ensure that csum for a given extent are
* either valid or do not exist.
*/
- if (csum_exist_in_range(fs_info, disk_bytenr,
- num_bytes)) {
+ ret = csum_exist_in_range(fs_info, disk_bytenr,
+ num_bytes);
+ if (ret) {
if (!nolock)
btrfs_end_write_no_snapshotting(root);
+
+ /*
+ * ret could be -EIO if the above fails to read
+ * metadata.
+ */
+ if (ret < 0) {
+ if (cow_start != (u64)-1)
+ cur_offset = cow_start;
+ goto error;
+ }
+ WARN_ON_ONCE(nolock);
goto out_check;
}
if (!btrfs_inc_nocow_writers(fs_info, disk_bytenr)) {
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 59fba0869acae06ff594dd7e9808ed673f53538a upstream.
While the specific UFS PHY drivers (14nm and 20nm) have a module
license, the common base module does not, leading to a Kbuild
failure:
WARNING: modpost: missing MODULE_LICENSE() in drivers/phy/qualcomm/phy-qcom-ufs.o
FATAL: modpost: GPL-incompatible module phy-qcom-ufs.ko uses GPL-only symbol 'clk_enable'
This adds a module description and license tag to fix the build.
I added both Yaniv and Vivek as authors here, as Yaniv sent the initial
submission, while Vivek did most of the work since.
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Bjorn Andersson <[email protected]>
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/phy/qualcomm/phy-qcom-ufs.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/phy/qualcomm/phy-qcom-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-ufs.c
@@ -689,3 +689,8 @@ int ufs_qcom_phy_power_off(struct phy *g
return 0;
}
EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_off);
+
+MODULE_AUTHOR("Yaniv Gardi <[email protected]>");
+MODULE_AUTHOR("Vivek Gautam <[email protected]>");
+MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY");
+MODULE_LICENSE("GPL v2");
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dennis Wassenberg <[email protected]>
commit b56af54ac78c54a519d82813836f305d7f76ef27 upstream.
Reset i8042 before probing because of insufficient BIOS initialisation of
the i8042 serial controller. This makes Synaptics touchpad detection
possible. Without resetting the Synaptics touchpad is not detected because
there are always NACK messages from AUX port.
Signed-off-by: Dennis Wassenberg <[email protected]>
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/serio/i8042-x86ia64io.h | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -621,6 +621,13 @@ static const struct dmi_system_id __init
},
},
{
+ /* Lenovo ThinkPad L460 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad L460"),
+ },
+ },
+ {
/* Clevo P650RS, 650RP6, Sager NP8152-S, and others */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Leonard Crestez <[email protected]>
commit 6aaf49b495b446ff6eec0ac983f781ca0dc56a73 upstream.
The decision to rebuild .S_shipped is made based on the relative
timestamps of .S_shipped and .pl files but git makes this essentially
random. This means that the perl script might run anyway (usually at
most once per checkout), defeating the whole purpose of _shipped.
Fix by skipping the rule unless explicit make variables are provided:
REGENERATE_ARM_CRYPTO or REGENERATE_ARM64_CRYPTO.
This can produce nasty occasional build failures downstream, for example
for toolchains with broken perl. The solution is minimally intrusive to
make it easier to push into stable.
Another report on a similar issue here: https://lkml.org/lkml/2018/3/8/1379
Signed-off-by: Leonard Crestez <[email protected]>
Cc: <[email protected]>
Reviewed-by: Masahiro Yamada <[email protected]>
Acked-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/crypto/Makefile | 2 ++
arch/arm64/crypto/Makefile | 2 ++
2 files changed, 4 insertions(+)
--- a/arch/arm/crypto/Makefile
+++ b/arch/arm/crypto/Makefile
@@ -54,6 +54,7 @@ crct10dif-arm-ce-y := crct10dif-ce-core.
crc32-arm-ce-y:= crc32-ce-core.o crc32-ce-glue.o
chacha20-neon-y := chacha20-neon-core.o chacha20-neon-glue.o
+ifdef REGENERATE_ARM_CRYPTO
quiet_cmd_perl = PERL $@
cmd_perl = $(PERL) $(<) > $(@)
@@ -62,5 +63,6 @@ $(src)/sha256-core.S_shipped: $(src)/sha
$(src)/sha512-core.S_shipped: $(src)/sha512-armv4.pl
$(call cmd,perl)
+endif
.PRECIOUS: $(obj)/sha256-core.S $(obj)/sha512-core.S
--- a/arch/arm64/crypto/Makefile
+++ b/arch/arm64/crypto/Makefile
@@ -58,6 +58,7 @@ CFLAGS_aes-glue-ce.o := -DUSE_V8_CRYPTO_
$(obj)/aes-glue-%.o: $(src)/aes-glue.c FORCE
$(call if_changed_rule,cc_o_c)
+ifdef REGENERATE_ARM64_CRYPTO
quiet_cmd_perlasm = PERLASM $@
cmd_perlasm = $(PERL) $(<) void $(@)
@@ -66,5 +67,6 @@ $(src)/sha256-core.S_shipped: $(src)/sha
$(src)/sha512-core.S_shipped: $(src)/sha512-armv8.pl
$(call cmd,perlasm)
+endif
.PRECIOUS: $(obj)/sha256-core.S $(obj)/sha512-core.S
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Herbert Xu <[email protected]>
commit 900a081f6912a8985dc15380ec912752cb66025a upstream.
When we have an unaligned SG list entry where there is no leftover
aligned data, the hash walk code will incorrectly return zero as if
the entire SG list has been processed.
This patch fixes it by moving onto the next page instead.
Reported-by: Eli Cooper <[email protected]>
Cc: <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/ahash.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/crypto/ahash.c
+++ b/crypto/ahash.c
@@ -92,13 +92,14 @@ int crypto_hash_walk_done(struct crypto_
if (nbytes && walk->offset & alignmask && !err) {
walk->offset = ALIGN(walk->offset, alignmask + 1);
- walk->data += walk->offset;
-
nbytes = min(nbytes,
((unsigned int)(PAGE_SIZE)) - walk->offset);
walk->entrylen -= nbytes;
- return nbytes;
+ if (nbytes) {
+ walk->data += walk->offset;
+ return nbytes;
+ }
}
if (walk->flags & CRYPTO_ALG_ASYNC)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maciej S. Szmigiero <[email protected]>
commit 0a9eb80e643064266868bd2fb2cd608e669309b0 upstream.
rsa-pkcs1pad uses a value returned from a RSA implementation max_size
callback as a size of an input buffer passed to the RSA implementation for
encrypt and sign operations.
CCP RSA implementation uses a hardware input buffer which size depends only
on the current RSA key length, so it should return this key length in
the max_size callback, too.
This also matches what the kernel software RSA implementation does.
Previously, the value returned from this callback was always the maximum
RSA key size the CCP hardware supports.
This resulted in this huge buffer being passed by rsa-pkcs1pad to CCP even
for smaller key sizes and then in a buffer overflow when ccp_run_rsa_cmd()
tried to copy this large input buffer into a RSA key length-sized hardware
input buffer.
Signed-off-by: Maciej S. Szmigiero <[email protected]>
Fixes: ceeec0afd684 ("crypto: ccp - Add support for RSA on the CCP")
Cc: [email protected]
Acked-by: Gary R Hook <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/ccp/ccp-crypto-rsa.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--- a/drivers/crypto/ccp/ccp-crypto-rsa.c
+++ b/drivers/crypto/ccp/ccp-crypto-rsa.c
@@ -60,10 +60,9 @@ static int ccp_rsa_complete(struct crypt
static unsigned int ccp_rsa_maxsize(struct crypto_akcipher *tfm)
{
- if (ccp_version() > CCP_VERSION(3, 0))
- return CCP5_RSA_MAXMOD;
- else
- return CCP_RSA_MAXMOD;
+ struct ccp_ctx *ctx = akcipher_tfm_ctx(tfm);
+
+ return ctx->u.rsa.n_len;
}
static int ccp_rsa_crypt(struct akcipher_request *req, bool encrypt)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Conor McLoughlin <[email protected]>
commit 333e18c5cc74438f8940c7f3a8b3573748a371f9 upstream.
The RSA private key for the first form should have
version, prime1, prime2, exponent1, exponent2, coefficient
values 0.
With non-zero values for prime1,2, exponent 1,2 and coefficient
the Intel QAT driver will assume that values are provided for the
private key second form. This will result in signature verification
failures for modules where QAT device is present and the modules
are signed with rsa,sha256.
Cc: <[email protected]>
Signed-off-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Conor McLoughlin <[email protected]>
Reviewed-by: Stephan Mueller <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/testmgr.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/crypto/testmgr.h
+++ b/crypto/testmgr.h
@@ -548,7 +548,7 @@ static const struct akcipher_testvec rsa
static const struct akcipher_testvec pkcs1pad_rsa_tv_template[] = {
{
.key =
- "\x30\x82\x03\x1f\x02\x01\x10\x02\x82\x01\x01\x00\xd7\x1e\x77\x82"
+ "\x30\x82\x03\x1f\x02\x01\x00\x02\x82\x01\x01\x00\xd7\x1e\x77\x82"
"\x8c\x92\x31\xe7\x69\x02\xa2\xd5\x5c\x78\xde\xa2\x0c\x8f\xfe\x28"
"\x59\x31\xdf\x40\x9c\x60\x61\x06\xb9\x2f\x62\x40\x80\x76\xcb\x67"
"\x4a\xb5\x59\x56\x69\x17\x07\xfa\xf9\x4c\xbd\x6c\x37\x7a\x46\x7d"
@@ -597,8 +597,8 @@ static const struct akcipher_testvec pkc
"\xfe\xf8\x27\x1b\xd6\x55\x60\x5e\x48\xb7\x6d\x9a\xa8\x37\xf9\x7a"
"\xde\x1b\xcd\x5d\x1a\x30\xd4\xe9\x9e\x5b\x3c\x15\xf8\x9c\x1f\xda"
"\xd1\x86\x48\x55\xce\x83\xee\x8e\x51\xc7\xde\x32\x12\x47\x7d\x46"
- "\xb8\x35\xdf\x41\x02\x01\x30\x02\x01\x30\x02\x01\x30\x02\x01\x30"
- "\x02\x01\x30",
+ "\xb8\x35\xdf\x41\x02\x01\x00\x02\x01\x00\x02\x01\x00\x02\x01\x00"
+ "\x02\x01\x00",
.key_len = 804,
/*
* m is SHA256 hash of following message:
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Herbert Xu <[email protected]>
commit 8c9bdab21289c211ca1ca6a5f9b7537b4a600a02 upstream.
The buffer rctx->ext contains potentially sensitive data and should
be freed with kzfree.
Cc: <[email protected]>
Fixes: 700cb3f5fe75 ("crypto: lrw - Convert to skcipher")
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/lrw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/crypto/lrw.c
+++ b/crypto/lrw.c
@@ -313,7 +313,7 @@ static void exit_crypt(struct skcipher_r
rctx->left = 0;
if (rctx->ext)
- kfree(rctx->ext);
+ kzfree(rctx->ext);
}
static int do_encrypt(struct skcipher_request *req, int err)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Gerasiov <[email protected]>
commit 823f7923833c6cc2b16e601546d607dcfb368004 upstream.
WCH CH382L is a PCI-E adapter with 1 parallel port. It is similair to CH382
but serial ports are not soldered on board. Detected as
Serial controller: Device 1c00:3050 (rev 10) (prog-if 05 [16850])
Signed-off-by: Alexander Gerasiov <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/parport/parport_pc.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -2646,6 +2646,7 @@ enum parport_pc_pci_cards {
netmos_9901,
netmos_9865,
quatech_sppxp100,
+ wch_ch382l,
};
@@ -2708,6 +2709,7 @@ static struct parport_pc_pci {
/* netmos_9901 */ { 1, { { 0, -1 }, } },
/* netmos_9865 */ { 1, { { 0, -1 }, } },
/* quatech_sppxp100 */ { 1, { { 0, 1 }, } },
+ /* wch_ch382l */ { 1, { { 2, -1 }, } },
};
static const struct pci_device_id parport_pc_pci_tbl[] = {
@@ -2797,6 +2799,8 @@ static const struct pci_device_id parpor
/* Quatech SPPXP-100 Parallel port PCI ExpressCard */
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },
+ /* WCH CH382L PCI-E single parallel port card */
+ { 0x1c00, 0x3050, 0x1c00, 0x3050, 0, 0, wch_ch382l },
{ 0, } /* terminate list */
};
MODULE_DEVICE_TABLE(pci, parport_pc_pci_tbl);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gregory CLEMENT <[email protected]>
commit f962eb46e7a9b98a58d2483f5eb216e738fec732 upstream.
In this driver the clock is got but never put when the driver is removed
or if there is an error in the probe.
Using the managed version of clk_get() allows to let the kernel take care
of it.
Fixes: 1b44c5a60c13 ("crypto: inside-secure - add SafeXcel EIP197 crypto
engine driver")
cc: [email protected]
Signed-off-by: Gregory CLEMENT <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/inside-secure/safexcel.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/crypto/inside-secure/safexcel.c
+++ b/drivers/crypto/inside-secure/safexcel.c
@@ -789,7 +789,7 @@ static int safexcel_probe(struct platfor
return PTR_ERR(priv->base);
}
- priv->clk = of_clk_get(dev->of_node, 0);
+ priv->clk = devm_clk_get(&pdev->dev, NULL);
if (!IS_ERR(priv->clk)) {
ret = clk_prepare_enable(priv->clk);
if (ret) {
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kees Cook <[email protected]>
commit b5b38200ebe54879a7264cb6f33821f61c586a7e upstream.
Successes in probe_kernel_read() would mask failures in copy_to_user()
during read_mem().
Reported-by: Brad Spengler <[email protected]>
Fixes: 22ec1a2aea73 ("/dev/mem: Add bounce buffer for copy-out")
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/mem.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -137,7 +137,7 @@ static ssize_t read_mem(struct file *fil
while (count > 0) {
unsigned long remaining;
- int allowed;
+ int allowed, probe;
sz = size_inside_page(p, count);
@@ -160,9 +160,9 @@ static ssize_t read_mem(struct file *fil
if (!ptr)
goto failed;
- err = probe_kernel_read(bounce, ptr, sz);
+ probe = probe_kernel_read(bounce, ptr, sz);
unxlate_dev_mem_ptr(p, ptr);
- if (err)
+ if (probe)
goto failed;
remaining = copy_to_user(buf, bounce, sz);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oliver Neukum <[email protected]>
commit 50e7044535537b2a54c7ab798cd34c7f6d900bd2 upstream.
Quoting the original report:
It looks like there is a double-free vulnerability in Linux usbtv driver
on an error path of usbtv_probe function. When audio registration fails,
usbtv_video_free function ends up freeing usbtv data structure, which
gets freed the second time under usbtv_video_fail label.
usbtv_audio_fail:
usbtv_video_free(usbtv); =>
v4l2_device_put(&usbtv->v4l2_dev);
=> v4l2_device_put
=> kref_put
=> v4l2_device_release
=> usbtv_release (CALLBACK)
=> kfree(usbtv) (1st time)
usbtv_video_fail:
usb_set_intfdata(intf, NULL);
usb_put_dev(usbtv->udev);
kfree(usbtv); (2nd time)
So, as we have refcounting, use it
Reported-by: Yavuz, Tuba <[email protected]>
Signed-off-by: Oliver Neukum <[email protected]>
CC: [email protected]
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/usbtv/usbtv-core.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/media/usb/usbtv/usbtv-core.c
+++ b/drivers/media/usb/usbtv/usbtv-core.c
@@ -112,6 +112,8 @@ static int usbtv_probe(struct usb_interf
return 0;
usbtv_audio_fail:
+ /* we must not free at this point */
+ usb_get_dev(usbtv->udev);
usbtv_video_free(usbtv);
usbtv_video_fail:
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
commit 5607dddbfca774fb38bffadcb077fe03aa4ac5c6 upstream.
Smatch complains that "tmp" can be uninitialized if we do a zero size
write.
Fixes: 02a5d6925cd3 ("ALSA: pcm: Avoid potential races between OSS ioctls and read/write")
Signed-off-by: Dan Carpenter <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/oss/pcm_oss.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -1326,7 +1326,7 @@ static ssize_t snd_pcm_oss_write2(struct
static ssize_t snd_pcm_oss_write1(struct snd_pcm_substream *substream, const char __user *buf, size_t bytes)
{
size_t xfer = 0;
- ssize_t tmp;
+ ssize_t tmp = 0;
struct snd_pcm_runtime *runtime = substream->runtime;
if (atomic_read(&substream->mmap_count))
@@ -1433,7 +1433,7 @@ static ssize_t snd_pcm_oss_read2(struct
static ssize_t snd_pcm_oss_read1(struct snd_pcm_substream *substream, char __user *buf, size_t bytes)
{
size_t xfer = 0;
- ssize_t tmp;
+ ssize_t tmp = 0;
struct snd_pcm_runtime *runtime = substream->runtime;
if (atomic_read(&substream->mmap_count))
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Boris Brezillon <[email protected]>
commit 2b1b1b4ac716fd929a2d221bd4ade62263bed915 upstream.
get_sectorsize() was not using the appropriate macro to extract the
ECC sector size from the config cache, which led to buggy ECC when
using 1024 byte sectors.
Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver")
Cc: <[email protected]>
Reported-by: Olivier Schonken <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Reviewed-by: Richard Weinberger <[email protected]>
Acked-by: Nicolas Ferre <[email protected]>
Tested-by: Olivier Schonken <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/atmel/pmecc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/mtd/nand/atmel/pmecc.c
+++ b/drivers/mtd/nand/atmel/pmecc.c
@@ -426,7 +426,7 @@ static int get_strength(struct atmel_pme
static int get_sectorsize(struct atmel_pmecc_user *user)
{
- return user->cache.cfg & PMECC_LOOKUP_TABLE_SIZE_1024 ? 1024 : 512;
+ return user->cache.cfg & PMECC_CFG_SECTOR1024 ? 1024 : 512;
}
static void atmel_pmecc_gen_syndrome(struct atmel_pmecc_user *user, int sector)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Linus Walleij <[email protected]>
commit 87a73eb5b56fd6e07c8e499fe8608ef2d8912b82 upstream.
It turns out that the loop where we read manufacturer
jedec_read_mfd() can under some circumstances get a
CFI_MFR_CONTINUATION repeatedly, making the loop go
over all banks and eventually hit the end of the
map and crash because of an access violation:
Unable to handle kernel paging request at virtual address c4980000
pgd = (ptrval)
[c4980000] *pgd=03808811, *pte=00000000, *ppte=00000000
Internal error: Oops: 7 [#1] PREEMPT ARM
CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc1+ #150
Hardware name: Gemini (Device Tree)
PC is at jedec_probe_chip+0x6ec/0xcd0
LR is at 0x4
pc : [<c03a2bf4>] lr : [<00000004>] psr: 60000013
sp : c382dd18 ip : 0000ffff fp : 00000000
r10: c0626388 r9 : 00020000 r8 : c0626340
r7 : 00000000 r6 : 00000001 r5 : c3a71afc r4 : c382dd70
r3 : 00000001 r2 : c4900000 r1 : 00000002 r0 : 00080000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 0000397f Table: 00004000 DAC: 00000053
Process swapper (pid: 1, stack limit = 0x(ptrval))
Fix this by breaking the loop with a return 0 if
the offset exceeds the map size.
Fixes: 5c9c11e1c47c ("[MTD] [NOR] Add support for flash chips with ID in bank other than 0")
Cc: <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/chips/jedec_probe.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -1889,6 +1889,8 @@ static inline u32 jedec_read_mfr(struct
do {
uint32_t ofs = cfi_build_cmd_addr(0 + (bank << 8), map, cfi);
mask = (1 << (cfi->device_type * 8)) - 1;
+ if (ofs >= map->size)
+ return 0;
result = map_read(map, base + ofs);
bank++;
} while ((result.x[0] & mask) == CFI_MFR_CONTINUATION);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nobutaka Okabe <[email protected]>
commit b00214865d65100163574ba250008f182cf90869 upstream.
Add native DSD support quirk for TEAC UD-301 DAC,
by adding the PID/VID 0644:804a.
Signed-off-by: Nobutaka Okabe <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/quirks.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1177,6 +1177,7 @@ static bool is_teac_dsd_dac(unsigned int
switch (id) {
case USB_ID(0x0644, 0x8043): /* TEAC UD-501/UD-503/NT-503 */
case USB_ID(0x0644, 0x8044): /* Esoteric D-05X */
+ case USB_ID(0x0644, 0x804a): /* TEAC UD-301 */
return true;
}
return false;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michal Hocko <[email protected]>
commit 0537250fdc6c876ed4cbbe874c739aebef493ee2 upstream.
syzbot has noticed that xt_alloc_table_info can allocate a lot of memory.
This is an admin only interface but an admin in a namespace is sufficient
as well. eacd86ca3b03 ("net/netfilter/x_tables.c: use kvmalloc() in
xt_alloc_table_info()") has changed the opencoded kmalloc->vmalloc
fallback into kvmalloc. It has dropped __GFP_NORETRY on the way because
vmalloc has simply never fully supported __GFP_NORETRY semantic. This is
still the case because e.g. page tables backing the vmalloc area are
hardcoded GFP_KERNEL.
Revert back to __GFP_NORETRY as a poors man defence against excessively
large allocation request here. We will not rule out the OOM killer
completely but __GFP_NORETRY should at least stop the large request in
most cases.
[[email protected]: coding-style fixes]
Fixes: eacd86ca3b03 ("net/netfilter/x_tables.c: use kvmalloc() in xt_alloc_tableLink: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Michal Hocko <[email protected]>
Acked-by: Florian Westphal <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: David S. Miller <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netfilter/x_tables.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -1008,7 +1008,12 @@ struct xt_table_info *xt_alloc_table_inf
if ((size >> PAGE_SHIFT) + 2 > totalram_pages)
return NULL;
- info = kvmalloc(sz, GFP_KERNEL);
+ /* __GFP_NORETRY is not fully supported by kvmalloc but it should
+ * work reasonably well if sz is too large and bail out rather
+ * than shoot all processes down before realizing there is nothing
+ * more to reclaim.
+ */
+ info = kvmalloc(sz, GFP_KERNEL | __GFP_NORETRY);
if (!info)
return NULL;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Philipp Rossak <[email protected]>
commit 70b8d21496758dd7ff600ec9de0ee3812fac7a40 upstream.
This patch fixes a bootproblem with the Bananapi M2 board. Since there
are some regulators missing we add them right now. Those values come
from the schematic, below you can find a small overview:
* reg_aldo1: 3,3V, powers the wifi
* reg_aldo2: 2,5V, powers the IO of the RTL8211E
* reg_aldo3: 3,3V, powers the audio
* reg_dldo1: 3,0V, powers the RTL8211E
* reg_dldo2: 2,8V, powers the analog part of the csi
* reg_dldo3: 3,3V, powers misc
* reg_eldo1: 1,8V, powers the csi
* reg_ldo_io1:1,8V, powers the gpio
* reg_dc5ldo: needs to be always on
This patch updates also the vmmc-supply properties on the mmc0 and mmc2
node to use the allready existent regulators.
We can now remove the sunxi-common-regulators.dtsi include since we
don't need it anymore.
Fixes: 7daa21370075 ("ARM: dts: sunxi: Add regulators for Sinovoip BPI-M2")
Cc: <[email protected]>
Signed-off-by: Philipp Rossak <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 61 +++++++++++++++++++++--
1 file changed, 58 insertions(+), 3 deletions(-)
--- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -42,7 +42,6 @@
/dts-v1/;
#include "sun6i-a31s.dtsi"
-#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
@@ -99,6 +98,7 @@
pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>;
phy = <&phy1>;
phy-mode = "rgmii";
+ phy-supply = <®_dldo1>;
snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
snps,reset-active-low;
snps,reset-delays-us = <0 10000 30000>;
@@ -118,7 +118,7 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>;
- vmmc-supply = <®_vcc3v0>;
+ vmmc-supply = <®_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */
cd-inverted;
@@ -132,7 +132,7 @@
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_a>;
- vmmc-supply = <®_vcc3v0>;
+ vmmc-supply = <®_aldo1>;
mmc-pwrseq = <&mmc2_pwrseq>;
bus-width = <4>;
non-removable;
@@ -195,7 +195,28 @@
#include "axp22x.dtsi"
+®_aldo1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+®_aldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-name = "vcc-gmac";
+};
+
+®_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
®_dc5ldo {
+ regulator-always-on;
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1320000>;
regulator-name = "vdd-cpus";
@@ -235,6 +256,40 @@
regulator-name = "vcc-dram";
};
+®_dldo1 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-mac";
+};
+
+®_dldo2 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "avdd-csi";
+};
+
+®_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pb";
+};
+
+®_eldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vdd-csi";
+ status = "okay";
+};
+
+®_ldo_io1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pm-cpus";
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dennis Zhou <[email protected]>
commit 47504ee04b9241548ae2c28be7d0b01cff3b7aa6 upstream.
Percpu memory using the vmalloc area based chunk allocator lazily
populates chunks by first requesting the full virtual address space
required for the chunk and subsequently adding pages as allocations come
through. To ensure atomic allocations can succeed, a workqueue item is
used to maintain a minimum number of empty pages. In certain scenarios,
such as reported in [1], it is possible that physical memory becomes
quite scarce which can result in either a rather long time spent trying
to find free pages or worse, a kernel panic.
This patch adds support for __GFP_NORETRY and __GFP_NOWARN passing them
through to the underlying allocators. This should prevent any
unnecessary panics potentially caused by the workqueue item. The passing
of gfp around is as additional flags rather than a full set of flags.
The next patch will change these to caller passed semantics.
V2:
Added const modifier to gfp flags in the balance path.
Removed an extra whitespace.
[1] https://lkml.org/lkml/2018/2/12/551
Signed-off-by: Dennis Zhou <[email protected]>
Suggested-by: Daniel Borkmann <[email protected]>
Reported-by: [email protected]
Acked-by: Christoph Lameter <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/percpu-km.c | 8 ++++----
mm/percpu-vm.c | 18 +++++++++++-------
mm/percpu.c | 45 ++++++++++++++++++++++++++++-----------------
3 files changed, 43 insertions(+), 28 deletions(-)
--- a/mm/percpu-km.c
+++ b/mm/percpu-km.c
@@ -34,7 +34,7 @@
#include <linux/log2.h>
static int pcpu_populate_chunk(struct pcpu_chunk *chunk,
- int page_start, int page_end)
+ int page_start, int page_end, gfp_t gfp)
{
return 0;
}
@@ -45,18 +45,18 @@ static void pcpu_depopulate_chunk(struct
/* nada */
}
-static struct pcpu_chunk *pcpu_create_chunk(void)
+static struct pcpu_chunk *pcpu_create_chunk(gfp_t gfp)
{
const int nr_pages = pcpu_group_sizes[0] >> PAGE_SHIFT;
struct pcpu_chunk *chunk;
struct page *pages;
int i;
- chunk = pcpu_alloc_chunk();
+ chunk = pcpu_alloc_chunk(gfp);
if (!chunk)
return NULL;
- pages = alloc_pages(GFP_KERNEL, order_base_2(nr_pages));
+ pages = alloc_pages(gfp | GFP_KERNEL, order_base_2(nr_pages));
if (!pages) {
pcpu_free_chunk(chunk);
return NULL;
--- a/mm/percpu-vm.c
+++ b/mm/percpu-vm.c
@@ -37,7 +37,7 @@ static struct page **pcpu_get_pages(void
lockdep_assert_held(&pcpu_alloc_mutex);
if (!pages)
- pages = pcpu_mem_zalloc(pages_size);
+ pages = pcpu_mem_zalloc(pages_size, 0);
return pages;
}
@@ -73,18 +73,21 @@ static void pcpu_free_pages(struct pcpu_
* @pages: array to put the allocated pages into, indexed by pcpu_page_idx()
* @page_start: page index of the first page to be allocated
* @page_end: page index of the last page to be allocated + 1
+ * @gfp: allocation flags passed to the underlying allocator
*
* Allocate pages [@page_start,@page_end) into @pages for all units.
* The allocation is for @chunk. Percpu core doesn't care about the
* content of @pages and will pass it verbatim to pcpu_map_pages().
*/
static int pcpu_alloc_pages(struct pcpu_chunk *chunk,
- struct page **pages, int page_start, int page_end)
+ struct page **pages, int page_start, int page_end,
+ gfp_t gfp)
{
- const gfp_t gfp = GFP_KERNEL | __GFP_HIGHMEM | __GFP_COLD;
unsigned int cpu, tcpu;
int i;
+ gfp |= GFP_KERNEL | __GFP_HIGHMEM | __GFP_COLD;
+
for_each_possible_cpu(cpu) {
for (i = page_start; i < page_end; i++) {
struct page **pagep = &pages[pcpu_page_idx(cpu, i)];
@@ -262,6 +265,7 @@ static void pcpu_post_map_flush(struct p
* @chunk: chunk of interest
* @page_start: the start page
* @page_end: the end page
+ * @gfp: allocation flags passed to the underlying memory allocator
*
* For each cpu, populate and map pages [@page_start,@page_end) into
* @chunk.
@@ -270,7 +274,7 @@ static void pcpu_post_map_flush(struct p
* pcpu_alloc_mutex, does GFP_KERNEL allocation.
*/
static int pcpu_populate_chunk(struct pcpu_chunk *chunk,
- int page_start, int page_end)
+ int page_start, int page_end, gfp_t gfp)
{
struct page **pages;
@@ -278,7 +282,7 @@ static int pcpu_populate_chunk(struct pc
if (!pages)
return -ENOMEM;
- if (pcpu_alloc_pages(chunk, pages, page_start, page_end))
+ if (pcpu_alloc_pages(chunk, pages, page_start, page_end, gfp))
return -ENOMEM;
if (pcpu_map_pages(chunk, pages, page_start, page_end)) {
@@ -325,12 +329,12 @@ static void pcpu_depopulate_chunk(struct
pcpu_free_pages(chunk, pages, page_start, page_end);
}
-static struct pcpu_chunk *pcpu_create_chunk(void)
+static struct pcpu_chunk *pcpu_create_chunk(gfp_t gfp)
{
struct pcpu_chunk *chunk;
struct vm_struct **vms;
- chunk = pcpu_alloc_chunk();
+ chunk = pcpu_alloc_chunk(gfp);
if (!chunk)
return NULL;
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -447,10 +447,12 @@ static void pcpu_next_fit_region(struct
/**
* pcpu_mem_zalloc - allocate memory
* @size: bytes to allocate
+ * @gfp: allocation flags
*
* Allocate @size bytes. If @size is smaller than PAGE_SIZE,
- * kzalloc() is used; otherwise, vzalloc() is used. The returned
- * memory is always zeroed.
+ * kzalloc() is used; otherwise, the equivalent of vzalloc() is used.
+ * This is to facilitate passing through whitelisted flags. The
+ * returned memory is always zeroed.
*
* CONTEXT:
* Does GFP_KERNEL allocation.
@@ -458,15 +460,16 @@ static void pcpu_next_fit_region(struct
* RETURNS:
* Pointer to the allocated area on success, NULL on failure.
*/
-static void *pcpu_mem_zalloc(size_t size)
+static void *pcpu_mem_zalloc(size_t size, gfp_t gfp)
{
if (WARN_ON_ONCE(!slab_is_available()))
return NULL;
if (size <= PAGE_SIZE)
- return kzalloc(size, GFP_KERNEL);
+ return kzalloc(size, gfp | GFP_KERNEL);
else
- return vzalloc(size);
+ return __vmalloc(size, gfp | GFP_KERNEL | __GFP_ZERO,
+ PAGE_KERNEL);
}
/**
@@ -1154,12 +1157,12 @@ static struct pcpu_chunk * __init pcpu_a
return chunk;
}
-static struct pcpu_chunk *pcpu_alloc_chunk(void)
+static struct pcpu_chunk *pcpu_alloc_chunk(gfp_t gfp)
{
struct pcpu_chunk *chunk;
int region_bits;
- chunk = pcpu_mem_zalloc(pcpu_chunk_struct_size);
+ chunk = pcpu_mem_zalloc(pcpu_chunk_struct_size, gfp);
if (!chunk)
return NULL;
@@ -1168,17 +1171,17 @@ static struct pcpu_chunk *pcpu_alloc_chu
region_bits = pcpu_chunk_map_bits(chunk);
chunk->alloc_map = pcpu_mem_zalloc(BITS_TO_LONGS(region_bits) *
- sizeof(chunk->alloc_map[0]));
+ sizeof(chunk->alloc_map[0]), gfp);
if (!chunk->alloc_map)
goto alloc_map_fail;
chunk->bound_map = pcpu_mem_zalloc(BITS_TO_LONGS(region_bits + 1) *
- sizeof(chunk->bound_map[0]));
+ sizeof(chunk->bound_map[0]), gfp);
if (!chunk->bound_map)
goto bound_map_fail;
chunk->md_blocks = pcpu_mem_zalloc(pcpu_chunk_nr_blocks(chunk) *
- sizeof(chunk->md_blocks[0]));
+ sizeof(chunk->md_blocks[0]), gfp);
if (!chunk->md_blocks)
goto md_blocks_fail;
@@ -1277,9 +1280,10 @@ static void pcpu_chunk_depopulated(struc
* pcpu_addr_to_page - translate address to physical address
* pcpu_verify_alloc_info - check alloc_info is acceptable during init
*/
-static int pcpu_populate_chunk(struct pcpu_chunk *chunk, int off, int size);
+static int pcpu_populate_chunk(struct pcpu_chunk *chunk, int off, int size,
+ gfp_t gfp);
static void pcpu_depopulate_chunk(struct pcpu_chunk *chunk, int off, int size);
-static struct pcpu_chunk *pcpu_create_chunk(void);
+static struct pcpu_chunk *pcpu_create_chunk(gfp_t gfp);
static void pcpu_destroy_chunk(struct pcpu_chunk *chunk);
static struct page *pcpu_addr_to_page(void *addr);
static int __init pcpu_verify_alloc_info(const struct pcpu_alloc_info *ai);
@@ -1421,7 +1425,7 @@ restart:
}
if (list_empty(&pcpu_slot[pcpu_nr_slots - 1])) {
- chunk = pcpu_create_chunk();
+ chunk = pcpu_create_chunk(0);
if (!chunk) {
err = "failed to allocate new chunk";
goto fail;
@@ -1450,7 +1454,7 @@ area_found:
page_start, page_end) {
WARN_ON(chunk->immutable);
- ret = pcpu_populate_chunk(chunk, rs, re);
+ ret = pcpu_populate_chunk(chunk, rs, re, 0);
spin_lock_irqsave(&pcpu_lock, flags);
if (ret) {
@@ -1561,10 +1565,17 @@ void __percpu *__alloc_reserved_percpu(s
* pcpu_balance_workfn - manage the amount of free chunks and populated pages
* @work: unused
*
- * Reclaim all fully free chunks except for the first one.
+ * Reclaim all fully free chunks except for the first one. This is also
+ * responsible for maintaining the pool of empty populated pages. However,
+ * it is possible that this is called when physical memory is scarce causing
+ * OOM killer to be triggered. We should avoid doing so until an actual
+ * allocation causes the failure as it is possible that requests can be
+ * serviced from already backed regions.
*/
static void pcpu_balance_workfn(struct work_struct *work)
{
+ /* gfp flags passed to underlying allocators */
+ const gfp_t gfp = __GFP_NORETRY | __GFP_NOWARN;
LIST_HEAD(to_free);
struct list_head *free_head = &pcpu_slot[pcpu_nr_slots - 1];
struct pcpu_chunk *chunk, *next;
@@ -1645,7 +1656,7 @@ retry_pop:
chunk->nr_pages) {
int nr = min(re - rs, nr_to_pop);
- ret = pcpu_populate_chunk(chunk, rs, rs + nr);
+ ret = pcpu_populate_chunk(chunk, rs, rs + nr, gfp);
if (!ret) {
nr_to_pop -= nr;
spin_lock_irq(&pcpu_lock);
@@ -1662,7 +1673,7 @@ retry_pop:
if (nr_to_pop) {
/* ran out of chunks to populate, create a new one and retry */
- chunk = pcpu_create_chunk();
+ chunk = pcpu_create_chunk(gfp);
if (chunk) {
spin_lock_irq(&pcpu_lock);
pcpu_chunk_relocate(chunk, -1);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Roland Dreier <[email protected]>
commit 84652aefb347297aa08e91e283adf7b18f77c2d5 upstream.
There are several places in the ucma ABI where userspace can pass in a
sockaddr but set the address family to AF_IB. When that happens,
rdma_addr_size() will return a size bigger than sizeof struct sockaddr_in6,
and the ucma kernel code might end up copying past the end of a buffer
not sized for a struct sockaddr_ib.
Fix this by introducing new variants
int rdma_addr_size_in6(struct sockaddr_in6 *addr);
int rdma_addr_size_kss(struct __kernel_sockaddr_storage *addr);
that are type-safe for the types used in the ucma ABI and return 0 if the
size computed is bigger than the size of the type passed in. We can use
these new variants to check what size userspace has passed in before
copying any addresses.
Reported-by: <[email protected]>
Signed-off-by: Roland Dreier <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/addr.c | 16 ++++++++++++++++
drivers/infiniband/core/ucma.c | 34 +++++++++++++++++-----------------
include/rdma/ib_addr.h | 2 ++
3 files changed, 35 insertions(+), 17 deletions(-)
--- a/drivers/infiniband/core/addr.c
+++ b/drivers/infiniband/core/addr.c
@@ -207,6 +207,22 @@ int rdma_addr_size(struct sockaddr *addr
}
EXPORT_SYMBOL(rdma_addr_size);
+int rdma_addr_size_in6(struct sockaddr_in6 *addr)
+{
+ int ret = rdma_addr_size((struct sockaddr *) addr);
+
+ return ret <= sizeof(*addr) ? ret : 0;
+}
+EXPORT_SYMBOL(rdma_addr_size_in6);
+
+int rdma_addr_size_kss(struct __kernel_sockaddr_storage *addr)
+{
+ int ret = rdma_addr_size((struct sockaddr *) addr);
+
+ return ret <= sizeof(*addr) ? ret : 0;
+}
+EXPORT_SYMBOL(rdma_addr_size_kss);
+
static struct rdma_addr_client self;
void rdma_addr_register_client(struct rdma_addr_client *client)
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -632,6 +632,9 @@ static ssize_t ucma_bind_ip(struct ucma_
if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
return -EFAULT;
+ if (!rdma_addr_size_in6(&cmd.addr))
+ return -EINVAL;
+
ctx = ucma_get_ctx(file, cmd.id);
if (IS_ERR(ctx))
return PTR_ERR(ctx);
@@ -645,22 +648,21 @@ static ssize_t ucma_bind(struct ucma_fil
int in_len, int out_len)
{
struct rdma_ucm_bind cmd;
- struct sockaddr *addr;
struct ucma_context *ctx;
int ret;
if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
return -EFAULT;
- addr = (struct sockaddr *) &cmd.addr;
- if (cmd.reserved || !cmd.addr_size || (cmd.addr_size != rdma_addr_size(addr)))
+ if (cmd.reserved || !cmd.addr_size ||
+ cmd.addr_size != rdma_addr_size_kss(&cmd.addr))
return -EINVAL;
ctx = ucma_get_ctx(file, cmd.id);
if (IS_ERR(ctx))
return PTR_ERR(ctx);
- ret = rdma_bind_addr(ctx->cm_id, addr);
+ ret = rdma_bind_addr(ctx->cm_id, (struct sockaddr *) &cmd.addr);
ucma_put_ctx(ctx);
return ret;
}
@@ -670,23 +672,22 @@ static ssize_t ucma_resolve_ip(struct uc
int in_len, int out_len)
{
struct rdma_ucm_resolve_ip cmd;
- struct sockaddr *src, *dst;
struct ucma_context *ctx;
int ret;
if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
return -EFAULT;
- src = (struct sockaddr *) &cmd.src_addr;
- dst = (struct sockaddr *) &cmd.dst_addr;
- if (!rdma_addr_size(src) || !rdma_addr_size(dst))
+ if (!rdma_addr_size_in6(&cmd.src_addr) ||
+ !rdma_addr_size_in6(&cmd.dst_addr))
return -EINVAL;
ctx = ucma_get_ctx(file, cmd.id);
if (IS_ERR(ctx))
return PTR_ERR(ctx);
- ret = rdma_resolve_addr(ctx->cm_id, src, dst, cmd.timeout_ms);
+ ret = rdma_resolve_addr(ctx->cm_id, (struct sockaddr *) &cmd.src_addr,
+ (struct sockaddr *) &cmd.dst_addr, cmd.timeout_ms);
ucma_put_ctx(ctx);
return ret;
}
@@ -696,24 +697,23 @@ static ssize_t ucma_resolve_addr(struct
int in_len, int out_len)
{
struct rdma_ucm_resolve_addr cmd;
- struct sockaddr *src, *dst;
struct ucma_context *ctx;
int ret;
if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
return -EFAULT;
- src = (struct sockaddr *) &cmd.src_addr;
- dst = (struct sockaddr *) &cmd.dst_addr;
- if (cmd.reserved || (cmd.src_size && (cmd.src_size != rdma_addr_size(src))) ||
- !cmd.dst_size || (cmd.dst_size != rdma_addr_size(dst)))
+ if (cmd.reserved ||
+ (cmd.src_size && (cmd.src_size != rdma_addr_size_kss(&cmd.src_addr))) ||
+ !cmd.dst_size || (cmd.dst_size != rdma_addr_size_kss(&cmd.dst_addr)))
return -EINVAL;
ctx = ucma_get_ctx(file, cmd.id);
if (IS_ERR(ctx))
return PTR_ERR(ctx);
- ret = rdma_resolve_addr(ctx->cm_id, src, dst, cmd.timeout_ms);
+ ret = rdma_resolve_addr(ctx->cm_id, (struct sockaddr *) &cmd.src_addr,
+ (struct sockaddr *) &cmd.dst_addr, cmd.timeout_ms);
ucma_put_ctx(ctx);
return ret;
}
@@ -1432,7 +1432,7 @@ static ssize_t ucma_join_ip_multicast(st
join_cmd.response = cmd.response;
join_cmd.uid = cmd.uid;
join_cmd.id = cmd.id;
- join_cmd.addr_size = rdma_addr_size((struct sockaddr *) &cmd.addr);
+ join_cmd.addr_size = rdma_addr_size_in6(&cmd.addr);
if (!join_cmd.addr_size)
return -EINVAL;
@@ -1451,7 +1451,7 @@ static ssize_t ucma_join_multicast(struc
if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
return -EFAULT;
- if (!rdma_addr_size((struct sockaddr *)&cmd.addr))
+ if (!rdma_addr_size_kss(&cmd.addr))
return -EINVAL;
return ucma_process_join(file, &cmd, out_len);
--- a/include/rdma/ib_addr.h
+++ b/include/rdma/ib_addr.h
@@ -129,6 +129,8 @@ int rdma_copy_addr(struct rdma_dev_addr
const unsigned char *dst_dev_addr);
int rdma_addr_size(struct sockaddr *addr);
+int rdma_addr_size_in6(struct sockaddr_in6 *addr);
+int rdma_addr_size_kss(struct __kernel_sockaddr_storage *addr);
int rdma_addr_find_smac_by_sgid(union ib_gid *sgid, u8 *smac, u16 *vlan_id);
int rdma_addr_find_l2_eth_by_grh(const union ib_gid *sgid,
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Greg Hackmann <[email protected]>
commit 0dcd7876029b58770f769cbb7b484e88e4a305e5 upstream.
f7c83bcbfaf5 ("net: xfrm: use __this_cpu_read per-cpu helper") added a
__this_cpu_read() call inside ipcomp_alloc_tfms().
At the time, __this_cpu_read() required the caller to either not care
about races or to handle preemption/interrupt issues. 3.15 tightened
the rules around some per-cpu operations, and now __this_cpu_read()
should never be used in a preemptible context. On 3.15 and later, we
need to use this_cpu_read() instead.
syzkaller reported this leading to the following kernel BUG while
fuzzing sendmsg:
BUG: using __this_cpu_read() in preemptible [00000000] code: repro/3101
caller is ipcomp_init_state+0x185/0x990
CPU: 3 PID: 3101 Comm: repro Not tainted 4.16.0-rc4-00123-g86f84779d8e9 #154
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Call Trace:
dump_stack+0xb9/0x115
check_preemption_disabled+0x1cb/0x1f0
ipcomp_init_state+0x185/0x990
? __xfrm_init_state+0x876/0xc20
? lock_downgrade+0x5e0/0x5e0
ipcomp4_init_state+0xaa/0x7c0
__xfrm_init_state+0x3eb/0xc20
xfrm_init_state+0x19/0x60
pfkey_add+0x20df/0x36f0
? pfkey_broadcast+0x3dd/0x600
? pfkey_sock_destruct+0x340/0x340
? pfkey_seq_stop+0x80/0x80
? __skb_clone+0x236/0x750
? kmem_cache_alloc+0x1f6/0x260
? pfkey_sock_destruct+0x340/0x340
? pfkey_process+0x62a/0x6f0
pfkey_process+0x62a/0x6f0
? pfkey_send_new_mapping+0x11c0/0x11c0
? mutex_lock_io_nested+0x1390/0x1390
pfkey_sendmsg+0x383/0x750
? dump_sp+0x430/0x430
sock_sendmsg+0xc0/0x100
___sys_sendmsg+0x6c8/0x8b0
? copy_msghdr_from_user+0x3b0/0x3b0
? pagevec_lru_move_fn+0x144/0x1f0
? find_held_lock+0x32/0x1c0
? do_huge_pmd_anonymous_page+0xc43/0x11e0
? lock_downgrade+0x5e0/0x5e0
? get_kernel_page+0xb0/0xb0
? _raw_spin_unlock+0x29/0x40
? do_huge_pmd_anonymous_page+0x400/0x11e0
? __handle_mm_fault+0x553/0x2460
? __fget_light+0x163/0x1f0
? __sys_sendmsg+0xc7/0x170
__sys_sendmsg+0xc7/0x170
? SyS_shutdown+0x1a0/0x1a0
? __do_page_fault+0x5a0/0xca0
? lock_downgrade+0x5e0/0x5e0
SyS_sendmsg+0x27/0x40
? __sys_sendmsg+0x170/0x170
do_syscall_64+0x19f/0x640
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x7f0ee73dfb79
RSP: 002b:00007ffe14fc15a8 EFLAGS: 00000207 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0ee73dfb79
RDX: 0000000000000000 RSI: 00000000208befc8 RDI: 0000000000000004
RBP: 00007ffe14fc15b0 R08: 00007ffe14fc15c0 R09: 00007ffe14fc15c0
R10: 0000000000000000 R11: 0000000000000207 R12: 0000000000400440
R13: 00007ffe14fc16b0 R14: 0000000000000000 R15: 0000000000000000
Signed-off-by: Greg Hackmann <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/xfrm/xfrm_ipcomp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/xfrm/xfrm_ipcomp.c
+++ b/net/xfrm/xfrm_ipcomp.c
@@ -283,7 +283,7 @@ static struct crypto_comp * __percpu *ip
struct crypto_comp *tfm;
/* This can be any valid CPU ID so we don't need locking. */
- tfm = __this_cpu_read(*pos->tfms);
+ tfm = this_cpu_read(*pos->tfms);
if (!strcmp(crypto_comp_name(tfm), alg_name)) {
pos->users++;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Philipp Rossak <[email protected]>
commit b23af6ad8d2f708c4c3f92dd8f82c233247ba8bf upstream.
The eldoin is supplied from the dcdc1 regulator. The N_VBUSEN pin is
connected to an external power regulator (SY6280AAC).
With this commit we update the pmic binding properties to support
those features.
Fixes: 7daa21370075 ("ARM: dts: sunxi: Add regulators for Sinovoip BPI-M2")
Cc: <[email protected]>
Signed-off-by: Philipp Rossak <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -163,6 +163,8 @@
reg = <0x68>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ eldoin-supply = <®_dcdc1>;
+ x-powers,drive-vbus-en;
};
};
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Leon Romanovsky <[email protected]>
commit 4b658d1bbc16605330694bb3ef2570c465ef383d upstream.
Add missing check that device is connected prior to access it.
[ 55.358652] BUG: KASAN: null-ptr-deref in rdma_init_qp_attr+0x4a/0x2c0
[ 55.359389] Read of size 8 at addr 00000000000000b0 by task qp/618
[ 55.360255]
[ 55.360432] CPU: 1 PID: 618 Comm: qp Not tainted 4.16.0-rc1-00071-gcaf61b1b8b88 #91
[ 55.361693] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
[ 55.363264] Call Trace:
[ 55.363833] dump_stack+0x5c/0x77
[ 55.364215] kasan_report+0x163/0x380
[ 55.364610] ? rdma_init_qp_attr+0x4a/0x2c0
[ 55.365238] rdma_init_qp_attr+0x4a/0x2c0
[ 55.366410] ucma_init_qp_attr+0x111/0x200
[ 55.366846] ? ucma_notify+0xf0/0xf0
[ 55.367405] ? _get_random_bytes+0xea/0x1b0
[ 55.367846] ? urandom_read+0x2f0/0x2f0
[ 55.368436] ? kmem_cache_alloc_trace+0xd2/0x1e0
[ 55.369104] ? refcount_inc_not_zero+0x9/0x60
[ 55.369583] ? refcount_inc+0x5/0x30
[ 55.370155] ? rdma_create_id+0x215/0x240
[ 55.370937] ? _copy_to_user+0x4f/0x60
[ 55.371620] ? mem_cgroup_commit_charge+0x1f5/0x290
[ 55.372127] ? _copy_from_user+0x5e/0x90
[ 55.372720] ucma_write+0x174/0x1f0
[ 55.373090] ? ucma_close_id+0x40/0x40
[ 55.373805] ? __lru_cache_add+0xa8/0xd0
[ 55.374403] __vfs_write+0xc4/0x350
[ 55.374774] ? kernel_read+0xa0/0xa0
[ 55.375173] ? fsnotify+0x899/0x8f0
[ 55.375544] ? fsnotify_unmount_inodes+0x170/0x170
[ 55.376689] ? __fsnotify_update_child_dentry_flags+0x30/0x30
[ 55.377522] ? handle_mm_fault+0x174/0x320
[ 55.378169] vfs_write+0xf7/0x280
[ 55.378864] SyS_write+0xa1/0x120
[ 55.379270] ? SyS_read+0x120/0x120
[ 55.379643] ? mm_fault_error+0x180/0x180
[ 55.380071] ? task_work_run+0x7d/0xd0
[ 55.380910] ? __task_pid_nr_ns+0x120/0x140
[ 55.381366] ? SyS_read+0x120/0x120
[ 55.381739] do_syscall_64+0xeb/0x250
[ 55.382143] entry_SYSCALL_64_after_hwframe+0x21/0x86
[ 55.382841] RIP: 0033:0x7fc2ef803e99
[ 55.383227] RSP: 002b:00007fffcc5f3be8 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
[ 55.384173] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc2ef803e99
[ 55.386145] RDX: 0000000000000057 RSI: 0000000020000080 RDI: 0000000000000003
[ 55.388418] RBP: 00007fffcc5f3c00 R08: 0000000000000000 R09: 0000000000000000
[ 55.390542] R10: 0000000000000000 R11: 0000000000000217 R12: 0000000000400480
[ 55.392916] R13: 00007fffcc5f3cf0 R14: 0000000000000000 R15: 0000000000000000
[ 55.521088] Code: e5 4d 1e ff 48 89 df 44 0f b6 b3 b8 01 00 00 e8 65 50 1e ff 4c 8b 2b 49
8d bd b0 00 00 00 e8 56 50 1e ff 41 0f b6 c6 48 c1 e0 04 <49> 03 85 b0 00 00 00 48 8d 78 08
48 89 04 24 e8 3a 4f 1e ff 48
[ 55.525980] RIP: rdma_init_qp_attr+0x52/0x2c0 RSP: ffff8801e2c2f9d8
[ 55.532648] CR2: 00000000000000b0
[ 55.534396] ---[ end trace 70cee64090251c0b ]---
Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace")
Fixes: d541e45500bd ("IB/core: Convert ah_attr from OPA to IB when copying to user")
Reported-by: <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/ucma.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -1165,6 +1165,11 @@ static ssize_t ucma_init_qp_attr(struct
if (IS_ERR(ctx))
return PTR_ERR(ctx);
+ if (!ctx->cm_id->device) {
+ ret = -EINVAL;
+ goto out;
+ }
+
resp.qp_attr_mask = 0;
memset(&qp_attr, 0, sizeof qp_attr);
qp_attr.qp_state = cmd.qp_state;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Gunthorpe <[email protected]>
commit 9137108cc3d64ade13e753108ec611a0daed16a0 upstream.
process_one_req() can race with rdma_addr_cancel():
CPU0 CPU1
==== ====
process_one_work()
debug_work_deactivate(work);
process_one_req()
rdma_addr_cancel()
mutex_lock(&lock);
set_timeout(&req->work,..);
__queue_work()
debug_work_activate(work);
mutex_unlock(&lock);
mutex_lock(&lock);
[..]
list_del(&req->list);
mutex_unlock(&lock);
[..]
// ODEBUG explodes since the work is still queued.
kfree(req);
Causing ODEBUG to detect the use after free:
ODEBUG: free active (active state 0) object type: work_struct hint: process_one_req+0x0/0x6c0 include/net/dst.h:165
WARNING: CPU: 0 PID: 79 at lib/debugobjects.c:291 debug_print_object+0x166/0x220 lib/debugobjects.c:288
kvm: emulating exchange as write
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 79 Comm: kworker/u4:3 Not tainted 4.16.0-rc6+ #361
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: ib_addr process_one_req
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x24d lib/dump_stack.c:53
panic+0x1e4/0x41c kernel/panic.c:183
__warn+0x1dc/0x200 kernel/panic.c:547
report_bug+0x1f4/0x2b0 lib/bug.c:186
fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178
fixup_bug arch/x86/kernel/traps.c:247 [inline]
do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296
do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315
invalid_op+0x1b/0x40 arch/x86/entry/entry_64.S:986
RIP: 0010:debug_print_object+0x166/0x220 lib/debugobjects.c:288
RSP: 0000:ffff8801d966f210 EFLAGS: 00010086
RAX: dffffc0000000008 RBX: 0000000000000003 RCX: ffffffff815acd6e
RDX: 0000000000000000 RSI: 1ffff1003b2cddf2 RDI: 0000000000000000
RBP: ffff8801d966f250 R08: 0000000000000000 R09: 1ffff1003b2cddc8
R10: ffffed003b2cde71 R11: ffffffff86f39a98 R12: 0000000000000001
R13: ffffffff86f15540 R14: ffffffff86408700 R15: ffffffff8147c0a0
__debug_check_no_obj_freed lib/debugobjects.c:745 [inline]
debug_check_no_obj_freed+0x662/0xf1f lib/debugobjects.c:774
kfree+0xc7/0x260 mm/slab.c:3799
process_one_req+0x2e7/0x6c0 drivers/infiniband/core/addr.c:592
process_one_work+0xc47/0x1bb0 kernel/workqueue.c:2113
worker_thread+0x223/0x1990 kernel/workqueue.c:2247
kthread+0x33c/0x400 kernel/kthread.c:238
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:406
Fixes: 5fff41e1f89d ("IB/core: Fix race condition in resolving IP to MAC")
Reported-by: <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/addr.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/infiniband/core/addr.c
+++ b/drivers/infiniband/core/addr.c
@@ -597,6 +597,15 @@ static void process_one_req(struct work_
list_del(&req->list);
mutex_unlock(&lock);
+ /*
+ * Although the work will normally have been canceled by the
+ * workqueue, it can still be requeued as long as it is on the
+ * req_list, so it could have been requeued before we grabbed &lock.
+ * We need to cancel it after it is removed from req_list to really be
+ * sure it is safe to free.
+ */
+ cancel_delayed_work(&req->work);
+
req->callback(req->status, (struct sockaddr *)&req->src_addr,
req->addr, req->context);
put_client(req->client);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Leon Romanovsky <[email protected]>
commit c8d3bcbfc5eab3f01cf373d039af725f3b488813 upstream.
Ensure that device exists prior to accessing its properties.
Reported-by: <[email protected]>
Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace")
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/ucma.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -1335,7 +1335,7 @@ static ssize_t ucma_notify(struct ucma_f
{
struct rdma_ucm_notify cmd;
struct ucma_context *ctx;
- int ret;
+ int ret = -EINVAL;
if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
return -EFAULT;
@@ -1344,7 +1344,9 @@ static ssize_t ucma_notify(struct ucma_f
if (IS_ERR(ctx))
return PTR_ERR(ctx);
- ret = rdma_notify(ctx->cm_id, (enum ib_event_type) cmd.event);
+ if (ctx->cm_id->device)
+ ret = rdma_notify(ctx->cm_id, (enum ib_event_type)cmd.event);
+
ucma_put_ctx(ctx);
return ret;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Leon Romanovsky <[email protected]>
commit 2975d5de6428ff6d9317e9948f0968f7d42e5d74 upstream.
Garbage supplied by user will cause to UCMA module provide zero
memory size for memcpy(), because it wasn't checked, it will
produce unpredictable results in rdma_resolve_addr().
[ 42.873814] BUG: KASAN: null-ptr-deref in rdma_resolve_addr+0xc8/0xfb0
[ 42.874816] Write of size 28 at addr 00000000000000a0 by task resaddr/1044
[ 42.876765]
[ 42.876960] CPU: 1 PID: 1044 Comm: resaddr Not tainted 4.16.0-rc1-00057-gaa56a5293d7e #34
[ 42.877840] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
[ 42.879691] Call Trace:
[ 42.880236] dump_stack+0x5c/0x77
[ 42.880664] kasan_report+0x163/0x380
[ 42.881354] ? rdma_resolve_addr+0xc8/0xfb0
[ 42.881864] memcpy+0x34/0x50
[ 42.882692] rdma_resolve_addr+0xc8/0xfb0
[ 42.883366] ? deref_stack_reg+0x88/0xd0
[ 42.883856] ? vsnprintf+0x31a/0x770
[ 42.884686] ? rdma_bind_addr+0xc40/0xc40
[ 42.885327] ? num_to_str+0x130/0x130
[ 42.885773] ? deref_stack_reg+0x88/0xd0
[ 42.886217] ? __read_once_size_nocheck.constprop.6+0x10/0x10
[ 42.887698] ? unwind_get_return_address_ptr+0x50/0x50
[ 42.888302] ? replace_slot+0x147/0x170
[ 42.889176] ? delete_node+0x12c/0x340
[ 42.890223] ? __radix_tree_lookup+0xa9/0x160
[ 42.891196] ? ucma_resolve_ip+0xb7/0x110
[ 42.891917] ucma_resolve_ip+0xb7/0x110
[ 42.893003] ? ucma_resolve_addr+0x190/0x190
[ 42.893531] ? _copy_from_user+0x5e/0x90
[ 42.894204] ucma_write+0x174/0x1f0
[ 42.895162] ? ucma_resolve_route+0xf0/0xf0
[ 42.896309] ? dequeue_task_fair+0x67e/0xd90
[ 42.897192] ? put_prev_entity+0x7d/0x170
[ 42.897870] ? ring_buffer_record_is_on+0xd/0x20
[ 42.898439] ? tracing_record_taskinfo_skip+0x20/0x50
[ 42.899686] __vfs_write+0xc4/0x350
[ 42.900142] ? kernel_read+0xa0/0xa0
[ 42.900602] ? firmware_map_remove+0xdf/0xdf
[ 42.901135] ? do_task_dead+0x5d/0x60
[ 42.901598] ? do_exit+0xcc6/0x1220
[ 42.902789] ? __fget+0xa8/0xf0
[ 42.903190] vfs_write+0xf7/0x280
[ 42.903600] SyS_write+0xa1/0x120
[ 42.904206] ? SyS_read+0x120/0x120
[ 42.905710] ? compat_start_thread+0x60/0x60
[ 42.906423] ? SyS_read+0x120/0x120
[ 42.908716] do_syscall_64+0xeb/0x250
[ 42.910760] entry_SYSCALL_64_after_hwframe+0x21/0x86
[ 42.912735] RIP: 0033:0x7f138b0afe99
[ 42.914734] RSP: 002b:00007f138b799e98 EFLAGS: 00000287 ORIG_RAX: 0000000000000001
[ 42.917134] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f138b0afe99
[ 42.919487] RDX: 000000000000002e RSI: 0000000020000c40 RDI: 0000000000000004
[ 42.922393] RBP: 00007f138b799ec0 R08: 00007f138b79a700 R09: 0000000000000000
[ 42.925266] R10: 00007f138b79a700 R11: 0000000000000287 R12: 00007f138b799fc0
[ 42.927570] R13: 0000000000000000 R14: 00007ffdbae757c0 R15: 00007f138b79a9c0
[ 42.930047]
[ 42.932681] Disabling lock debugging due to kernel taint
[ 42.934795] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0
[ 42.936939] IP: memcpy_erms+0x6/0x10
[ 42.938864] PGD 80000001bea92067 P4D 80000001bea92067 PUD 1bea96067 PMD 0
[ 42.941576] Oops: 0002 [#1] SMP KASAN PTI
[ 42.943952] CPU: 1 PID: 1044 Comm: resaddr Tainted: G B 4.16.0-rc1-00057-gaa56a5293d7e #34
[ 42.946964] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
[ 42.952336] RIP: 0010:memcpy_erms+0x6/0x10
[ 42.954707] RSP: 0018:ffff8801c8b479c8 EFLAGS: 00010286
[ 42.957227] RAX: 00000000000000a0 RBX: ffff8801c8b47ba0 RCX: 000000000000001c
[ 42.960543] RDX: 000000000000001c RSI: ffff8801c8b47bbc RDI: 00000000000000a0
[ 42.963867] RBP: ffff8801c8b47b60 R08: 0000000000000000 R09: ffffed0039168ed1
[ 42.967303] R10: 0000000000000001 R11: ffffed0039168ed0 R12: ffff8801c8b47bbc
[ 42.970685] R13: 00000000000000a0 R14: 1ffff10039168f4a R15: 0000000000000000
[ 42.973631] FS: 00007f138b79a700(0000) GS:ffff8801e5d00000(0000) knlGS:0000000000000000
[ 42.976831] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 42.979239] CR2: 00000000000000a0 CR3: 00000001be908002 CR4: 00000000003606a0
[ 42.982060] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 42.984877] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 42.988033] Call Trace:
[ 42.990487] rdma_resolve_addr+0xc8/0xfb0
[ 42.993202] ? deref_stack_reg+0x88/0xd0
[ 42.996055] ? vsnprintf+0x31a/0x770
[ 42.998707] ? rdma_bind_addr+0xc40/0xc40
[ 43.000985] ? num_to_str+0x130/0x130
[ 43.003410] ? deref_stack_reg+0x88/0xd0
[ 43.006302] ? __read_once_size_nocheck.constprop.6+0x10/0x10
[ 43.008780] ? unwind_get_return_address_ptr+0x50/0x50
[ 43.011178] ? replace_slot+0x147/0x170
[ 43.013517] ? delete_node+0x12c/0x340
[ 43.016019] ? __radix_tree_lookup+0xa9/0x160
[ 43.018755] ? ucma_resolve_ip+0xb7/0x110
[ 43.021270] ucma_resolve_ip+0xb7/0x110
[ 43.023968] ? ucma_resolve_addr+0x190/0x190
[ 43.026312] ? _copy_from_user+0x5e/0x90
[ 43.029384] ucma_write+0x174/0x1f0
[ 43.031861] ? ucma_resolve_route+0xf0/0xf0
[ 43.034782] ? dequeue_task_fair+0x67e/0xd90
[ 43.037483] ? put_prev_entity+0x7d/0x170
[ 43.040215] ? ring_buffer_record_is_on+0xd/0x20
[ 43.042990] ? tracing_record_taskinfo_skip+0x20/0x50
[ 43.045595] __vfs_write+0xc4/0x350
[ 43.048624] ? kernel_read+0xa0/0xa0
[ 43.051604] ? firmware_map_remove+0xdf/0xdf
[ 43.055379] ? do_task_dead+0x5d/0x60
[ 43.058000] ? do_exit+0xcc6/0x1220
[ 43.060783] ? __fget+0xa8/0xf0
[ 43.063133] vfs_write+0xf7/0x280
[ 43.065677] SyS_write+0xa1/0x120
[ 43.068647] ? SyS_read+0x120/0x120
[ 43.071179] ? compat_start_thread+0x60/0x60
[ 43.074025] ? SyS_read+0x120/0x120
[ 43.076705] do_syscall_64+0xeb/0x250
[ 43.079006] entry_SYSCALL_64_after_hwframe+0x21/0x86
[ 43.081606] RIP: 0033:0x7f138b0afe99
[ 43.083679] RSP: 002b:00007f138b799e98 EFLAGS: 00000287 ORIG_RAX: 0000000000000001
[ 43.086802] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f138b0afe99
[ 43.089989] RDX: 000000000000002e RSI: 0000000020000c40 RDI: 0000000000000004
[ 43.092866] RBP: 00007f138b799ec0 R08: 00007f138b79a700 R09: 0000000000000000
[ 43.096233] R10: 00007f138b79a700 R11: 0000000000000287 R12: 00007f138b799fc0
[ 43.098913] R13: 0000000000000000 R14: 00007ffdbae757c0 R15: 00007f138b79a9c0
[ 43.101809] Code: 90 90 90 90 90 eb 1e 0f 1f 00 48 89 f8 48 89 d1 48
c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48
89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38
[ 43.107950] RIP: memcpy_erms+0x6/0x10 RSP: ffff8801c8b479c8
Reported-by: <[email protected]>
Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace")
Signed-off-by: Leon Romanovsky <[email protected]>
Reviewed-by: Sean Hefty <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/ucma.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -664,19 +664,23 @@ static ssize_t ucma_resolve_ip(struct uc
int in_len, int out_len)
{
struct rdma_ucm_resolve_ip cmd;
+ struct sockaddr *src, *dst;
struct ucma_context *ctx;
int ret;
if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
return -EFAULT;
+ src = (struct sockaddr *) &cmd.src_addr;
+ dst = (struct sockaddr *) &cmd.dst_addr;
+ if (!rdma_addr_size(src) || !rdma_addr_size(dst))
+ return -EINVAL;
+
ctx = ucma_get_ctx(file, cmd.id);
if (IS_ERR(ctx))
return PTR_ERR(ctx);
- ret = rdma_resolve_addr(ctx->cm_id, (struct sockaddr *) &cmd.src_addr,
- (struct sockaddr *) &cmd.dst_addr,
- cmd.timeout_ms);
+ ret = rdma_resolve_addr(ctx->cm_id, src, dst, cmd.timeout_ms);
ucma_put_ctx(ctx);
return ret;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Westphal <[email protected]>
commit d97ca5d714a5334aecadadf696875da40f1fbf3e upstream.
The sanity test added in ecd7918745234 can be bypassed, validation
only occurs if XFRM_STATE_ESN flag is set, but rest of code doesn't care
and just checks if the attribute itself is present.
So always validate. Alternative is to reject if we have the attribute
without the flag but that would change abi.
Reported-by: [email protected]
Cc: Mathias Krause <[email protected]>
Fixes: ecd7918745234 ("xfrm_user: ensure user supplied esn replay window is valid")
Fixes: d8647b79c3b7e ("xfrm: Add user interface for esn and big anti-replay windows")
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/xfrm/xfrm_user.c | 21 ++++++++-------------
1 file changed, 8 insertions(+), 13 deletions(-)
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -121,22 +121,17 @@ static inline int verify_replay(struct x
struct nlattr *rt = attrs[XFRMA_REPLAY_ESN_VAL];
struct xfrm_replay_state_esn *rs;
- if (p->flags & XFRM_STATE_ESN) {
- if (!rt)
- return -EINVAL;
-
- rs = nla_data(rt);
+ if (!rt)
+ return (p->flags & XFRM_STATE_ESN) ? -EINVAL : 0;
- if (rs->bmp_len > XFRMA_REPLAY_ESN_MAX / sizeof(rs->bmp[0]) / 8)
- return -EINVAL;
+ rs = nla_data(rt);
- if (nla_len(rt) < xfrm_replay_state_esn_len(rs) &&
- nla_len(rt) != sizeof(*rs))
- return -EINVAL;
- }
+ if (rs->bmp_len > XFRMA_REPLAY_ESN_MAX / sizeof(rs->bmp[0]) / 8)
+ return -EINVAL;
- if (!rt)
- return 0;
+ if (nla_len(rt) < xfrm_replay_state_esn_len(rs) &&
+ nla_len(rt) != sizeof(*rs))
+ return -EINVAL;
/* As only ESP and AH support ESN feature. */
if ((p->id.proto != IPPROTO_ESP) && (p->id.proto != IPPROTO_AH))
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Narron <[email protected]>
commit 5f15684bd5e5ef39d4337988864fec8012471dda upstream.
UFS partitions from newer versions of FreeBSD 10 and 11 use relative
addressing for their subpartitions. But older versions of FreeBSD still
use absolute addressing just like OpenBSD and NetBSD.
Instead of simply testing for a FreeBSD partition, the code needs to
also test if the starting offset of the C subpartition is zero.
https://bugzilla.kernel.org/show_bug.cgi?id=197733
Signed-off-by: Richard Narron <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/partitions/msdos.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/block/partitions/msdos.c
+++ b/block/partitions/msdos.c
@@ -301,7 +301,9 @@ static void parse_bsd(struct parsed_part
continue;
bsd_start = le32_to_cpu(p->p_offset);
bsd_size = le32_to_cpu(p->p_size);
- if (memcmp(flavour, "bsd\0", 4) == 0)
+ /* FreeBSD has relative offset if C partition offset is zero */
+ if (memcmp(flavour, "bsd\0", 4) == 0 &&
+ le32_to_cpu(l->d_partitions[2].p_offset) == 0)
bsd_start += offset;
if (offset == bsd_start && size == bsd_size)
/* full parent partition, we have it already */
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Leon Romanovsky <[email protected]>
commit e8980d67d6017c8eee8f9c35f782c4bd68e004c9 upstream.
Prior to access UCMA commands, the context should be initialized
and connected to CM_ID with ucma_create_id(). In case user skips
this step, he can provide non-valid ctx without CM_ID and cause
to multiple NULL dereferences.
Also there are situations where the create_id can be raced with
other user access, ensure that the context is only shared to
other threads once it is fully initialized to avoid the races.
[ 109.088108] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[ 109.090315] IP: ucma_connect+0x138/0x1d0
[ 109.092595] PGD 80000001dc02d067 P4D 80000001dc02d067 PUD 1da9ef067 PMD 0
[ 109.095384] Oops: 0000 [#1] SMP KASAN PTI
[ 109.097834] CPU: 0 PID: 663 Comm: uclose Tainted: G B 4.16.0-rc1-00062-g2975d5de6428 #45
[ 109.100816] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
[ 109.105943] RIP: 0010:ucma_connect+0x138/0x1d0
[ 109.108850] RSP: 0018:ffff8801c8567a80 EFLAGS: 00010246
[ 109.111484] RAX: 0000000000000000 RBX: 1ffff100390acf50 RCX: ffffffff9d7812e2
[ 109.114496] RDX: 1ffffffff3f507a5 RSI: 0000000000000297 RDI: 0000000000000297
[ 109.117490] RBP: ffff8801daa15600 R08: 0000000000000000 R09: ffffed00390aceeb
[ 109.120429] R10: 0000000000000001 R11: ffffed00390aceea R12: 0000000000000000
[ 109.123318] R13: 0000000000000120 R14: ffff8801de6459c0 R15: 0000000000000118
[ 109.126221] FS: 00007fabb68d6700(0000) GS:ffff8801e5c00000(0000) knlGS:0000000000000000
[ 109.129468] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 109.132523] CR2: 0000000000000020 CR3: 00000001d45d8003 CR4: 00000000003606b0
[ 109.135573] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 109.138716] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 109.142057] Call Trace:
[ 109.144160] ? ucma_listen+0x110/0x110
[ 109.146386] ? wake_up_q+0x59/0x90
[ 109.148853] ? futex_wake+0x10b/0x2a0
[ 109.151297] ? save_stack+0x89/0xb0
[ 109.153489] ? _copy_from_user+0x5e/0x90
[ 109.155500] ucma_write+0x174/0x1f0
[ 109.157933] ? ucma_resolve_route+0xf0/0xf0
[ 109.160389] ? __mod_node_page_state+0x1d/0x80
[ 109.162706] __vfs_write+0xc4/0x350
[ 109.164911] ? kernel_read+0xa0/0xa0
[ 109.167121] ? path_openat+0x1b10/0x1b10
[ 109.169355] ? fsnotify+0x899/0x8f0
[ 109.171567] ? fsnotify_unmount_inodes+0x170/0x170
[ 109.174145] ? __fget+0xa8/0xf0
[ 109.177110] vfs_write+0xf7/0x280
[ 109.179532] SyS_write+0xa1/0x120
[ 109.181885] ? SyS_read+0x120/0x120
[ 109.184482] ? compat_start_thread+0x60/0x60
[ 109.187124] ? SyS_read+0x120/0x120
[ 109.189548] do_syscall_64+0xeb/0x250
[ 109.192178] entry_SYSCALL_64_after_hwframe+0x21/0x86
[ 109.194725] RIP: 0033:0x7fabb61ebe99
[ 109.197040] RSP: 002b:00007fabb68d5e98 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[ 109.200294] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fabb61ebe99
[ 109.203399] RDX: 0000000000000120 RSI: 00000000200001c0 RDI: 0000000000000004
[ 109.206548] RBP: 00007fabb68d5ec0 R08: 0000000000000000 R09: 0000000000000000
[ 109.209902] R10: 0000000000000000 R11: 0000000000000202 R12: 00007fabb68d5fc0
[ 109.213327] R13: 0000000000000000 R14: 00007fff40ab2430 R15: 00007fabb68d69c0
[ 109.216613] Code: 88 44 24 2c 0f b6 84 24 6e 01 00 00 88 44 24 2d 0f
b6 84 24 69 01 00 00 88 44 24 2e 8b 44 24 60 89 44 24 30 e8 da f6 06 ff
31 c0 <66> 41 83 7c 24 20 1b 75 04 8b 44 24 64 48 8d 74 24 20 4c 89 e7
[ 109.223602] RIP: ucma_connect+0x138/0x1d0 RSP: ffff8801c8567a80
[ 109.226256] CR2: 0000000000000020
Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace")
Reported-by: <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/ucma.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -132,7 +132,7 @@ static inline struct ucma_context *_ucma
ctx = idr_find(&ctx_idr, id);
if (!ctx)
ctx = ERR_PTR(-ENOENT);
- else if (ctx->file != file)
+ else if (ctx->file != file || !ctx->cm_id)
ctx = ERR_PTR(-EINVAL);
return ctx;
}
@@ -456,6 +456,7 @@ static ssize_t ucma_create_id(struct ucm
struct rdma_ucm_create_id cmd;
struct rdma_ucm_create_id_resp resp;
struct ucma_context *ctx;
+ struct rdma_cm_id *cm_id;
enum ib_qp_type qp_type;
int ret;
@@ -476,10 +477,10 @@ static ssize_t ucma_create_id(struct ucm
return -ENOMEM;
ctx->uid = cmd.uid;
- ctx->cm_id = rdma_create_id(current->nsproxy->net_ns,
- ucma_event_handler, ctx, cmd.ps, qp_type);
- if (IS_ERR(ctx->cm_id)) {
- ret = PTR_ERR(ctx->cm_id);
+ cm_id = rdma_create_id(current->nsproxy->net_ns,
+ ucma_event_handler, ctx, cmd.ps, qp_type);
+ if (IS_ERR(cm_id)) {
+ ret = PTR_ERR(cm_id);
goto err1;
}
@@ -489,10 +490,12 @@ static ssize_t ucma_create_id(struct ucm
ret = -EFAULT;
goto err2;
}
+
+ ctx->cm_id = cm_id;
return 0;
err2:
- rdma_destroy_id(ctx->cm_id);
+ rdma_destroy_id(cm_id);
err1:
mutex_lock(&mut);
idr_remove(&ctx_idr, ctx->id);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Piggin <[email protected]>
commit 52396500f97c53860164debc7d4f759077853423 upstream.
The SLB bad address handler's trap number fixup does not preserve the
low bit that indicates nonvolatile GPRs have not been saved. This
leads save_nvgprs to skip saving them, and subsequent functions and
return from interrupt will think they are saved.
This causes kernel branch-to-garbage debugging to not have correct
registers, can also cause userspace to have its registers clobbered
after a segfault.
Fixes: f0f558b131db ("powerpc/mm: Preserve CFAR value on SLB miss caused by access to bogus address")
Cc: [email protected] # v4.9+
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/exceptions-64s.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -704,7 +704,7 @@ EXC_COMMON_BEGIN(bad_addr_slb)
ld r3, PACA_EXSLB+EX_DAR(r13)
std r3, _DAR(r1)
beq cr6, 2f
- li r10, 0x480 /* fix trap number for I-SLB miss */
+ li r10, 0x481 /* fix trap number for I-SLB miss */
std r10, _TRAP(r1)
2: bl save_nvgprs
addi r3, r1, STACK_FRAME_OVERHEAD
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Leon Romanovsky <[email protected]>
commit ed65a4dc22083e73bac599ded6a262318cad7baf upstream.
The error in ucma_create_id() left ctx in the list of contexts belong
to ucma file descriptor. The attempt to close this file descriptor causes
to use-after-free accesses while iterating over such list.
Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace")
Reported-by: <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Reviewed-by: Sean Hefty <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/ucma.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -497,6 +497,9 @@ err1:
mutex_lock(&mut);
idr_remove(&ctx_idr, ctx->id);
mutex_unlock(&mut);
+ mutex_lock(&file->mut);
+ list_del(&ctx->list);
+ mutex_unlock(&file->mut);
kfree(ctx);
return ret;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrew Banman <[email protected]>
commit 151ad17fbe5e56afa59709f41980508672c777ce upstream.
BAU uses the old alloc_initr_gate90 method to setup its interrupt. This
fails silently as the BAU vector is in the range of APIC vectors that are
registered to the spurious interrupt handler. As a consequence BAU
broadcasts are not handled, and the broadcast source CPU hangs.
Update BAU to use new idt structure.
Fixes: dc20b2d52653 ("x86/idt: Move interrupt gate initialization to IDT code")
Signed-off-by: Andrew Banman <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Mike Travis <[email protected]>
Cc: Dimitri Sivanich <[email protected]>
Cc: Russ Anderson <[email protected]>
Cc: [email protected]
Cc: "H. Peter Anvin" <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/hw_irq.h | 1 +
arch/x86/kernel/idt.c | 3 +++
arch/x86/platform/uv/tlb_uv.c | 2 --
3 files changed, 4 insertions(+), 2 deletions(-)
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -34,6 +34,7 @@ extern asmlinkage void kvm_posted_intr_w
extern asmlinkage void kvm_posted_intr_nested_ipi(void);
extern asmlinkage void error_interrupt(void);
extern asmlinkage void irq_work_interrupt(void);
+extern asmlinkage void uv_bau_message_intr1(void);
extern asmlinkage void spurious_interrupt(void);
extern asmlinkage void thermal_interrupt(void);
--- a/arch/x86/kernel/idt.c
+++ b/arch/x86/kernel/idt.c
@@ -140,6 +140,9 @@ static const __initconst struct idt_data
# ifdef CONFIG_IRQ_WORK
INTG(IRQ_WORK_VECTOR, irq_work_interrupt),
# endif
+#ifdef CONFIG_X86_UV
+ INTG(UV_BAU_MESSAGE, uv_bau_message_intr1),
+#endif
INTG(SPURIOUS_APIC_VECTOR, spurious_interrupt),
INTG(ERROR_APIC_VECTOR, error_interrupt),
#endif
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -2254,8 +2254,6 @@ static int __init uv_bau_init(void)
init_uvhub(uvhub, vector, uv_base_pnode);
}
- alloc_intr_gate(vector, uv_bau_message_intr1);
-
for_each_possible_blade(uvhub) {
if (uv_blade_nr_possible_cpus(uvhub)) {
unsigned long val;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Linus Torvalds <[email protected]>
commit f67b15037a7a50c57f72e69a6d59941ad90a0f0f upstream.
Annoyingly, modify_user_hw_breakpoint() unnecessarily complicates the
modification of a breakpoint - simplify it and remove the pointless
local variables.
Also update the stale Docbook while at it.
Signed-off-by: Linus Torvalds <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Cc: <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Vince Weaver <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/events/hw_breakpoint.c | 30 +++++++-----------------------
1 file changed, 7 insertions(+), 23 deletions(-)
--- a/kernel/events/hw_breakpoint.c
+++ b/kernel/events/hw_breakpoint.c
@@ -427,16 +427,9 @@ EXPORT_SYMBOL_GPL(register_user_hw_break
* modify_user_hw_breakpoint - modify a user-space hardware breakpoint
* @bp: the breakpoint structure to modify
* @attr: new breakpoint attributes
- * @triggered: callback to trigger when we hit the breakpoint
- * @tsk: pointer to 'task_struct' of the process to which the address belongs
*/
int modify_user_hw_breakpoint(struct perf_event *bp, struct perf_event_attr *attr)
{
- u64 old_addr = bp->attr.bp_addr;
- u64 old_len = bp->attr.bp_len;
- int old_type = bp->attr.bp_type;
- int err = 0;
-
/*
* modify_user_hw_breakpoint can be invoked with IRQs disabled and hence it
* will not be possible to raise IPIs that invoke __perf_event_disable.
@@ -451,27 +444,18 @@ int modify_user_hw_breakpoint(struct per
bp->attr.bp_addr = attr->bp_addr;
bp->attr.bp_type = attr->bp_type;
bp->attr.bp_len = attr->bp_len;
+ bp->attr.disabled = 1;
- if (attr->disabled)
- goto end;
-
- err = validate_hw_breakpoint(bp);
- if (!err)
- perf_event_enable(bp);
+ if (!attr->disabled) {
+ int err = validate_hw_breakpoint(bp);
- if (err) {
- bp->attr.bp_addr = old_addr;
- bp->attr.bp_type = old_type;
- bp->attr.bp_len = old_len;
- if (!bp->attr.disabled)
- perf_event_enable(bp);
+ if (err)
+ return err;
- return err;
+ perf_event_enable(bp);
+ bp->attr.disabled = 0;
}
-end:
- bp->attr.disabled = attr->disabled;
-
return 0;
}
EXPORT_SYMBOL_GPL(modify_user_hw_breakpoint);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yan, Zheng <[email protected]>
commit 85784f9395987a422fa04263e7c0fb13da11eb5c upstream.
If a page is already locked, attempting to dirty it leads to a deadlock
in lock_page(). This is what currently happens to ITER_BVEC pages when
a dio-enabled loop device is backed by ceph:
$ losetup --direct-io /dev/loop0 /mnt/cephfs/img
$ xfs_io -c 'pread 0 4k' /dev/loop0
Follow other file systems and only dirty ITER_IOVEC pages.
Cc: [email protected]
Signed-off-by: "Yan, Zheng" <[email protected]>
Reviewed-by: Ilya Dryomov <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ceph/file.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -635,7 +635,8 @@ static ssize_t ceph_sync_read(struct kio
struct ceph_aio_request {
struct kiocb *iocb;
size_t total_len;
- int write;
+ bool write;
+ bool should_dirty;
int error;
struct list_head osd_reqs;
unsigned num_reqs;
@@ -745,7 +746,7 @@ static void ceph_aio_complete_req(struct
}
}
- ceph_put_page_vector(osd_data->pages, num_pages, !aio_req->write);
+ ceph_put_page_vector(osd_data->pages, num_pages, aio_req->should_dirty);
ceph_osdc_put_request(req);
if (rc < 0)
@@ -842,6 +843,7 @@ ceph_direct_read_write(struct kiocb *ioc
size_t count = iov_iter_count(iter);
loff_t pos = iocb->ki_pos;
bool write = iov_iter_rw(iter) == WRITE;
+ bool should_dirty = !write && iter_is_iovec(iter);
if (write && ceph_snap(file_inode(file)) != CEPH_NOSNAP)
return -EROFS;
@@ -909,6 +911,7 @@ ceph_direct_read_write(struct kiocb *ioc
if (aio_req) {
aio_req->iocb = iocb;
aio_req->write = write;
+ aio_req->should_dirty = should_dirty;
INIT_LIST_HEAD(&aio_req->osd_reqs);
if (write) {
aio_req->mtime = mtime;
@@ -966,7 +969,7 @@ ceph_direct_read_write(struct kiocb *ioc
len = ret;
}
- ceph_put_page_vector(pages, num_pages, !write);
+ ceph_put_page_vector(pages, num_pages, should_dirty);
ceph_osdc_put_request(req);
if (ret < 0)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Kravetz <[email protected]>
commit 3d942ee079b917b24e2a0c5f18d35ac8ec9fee48 upstream.
If System V shmget/shmat operations are used to create a hugetlbfs
backed mapping, it is possible to munmap part of the mapping and split
the underlying vma such that it is not huge page aligned. This will
untimately result in the following BUG:
kernel BUG at /build/linux-jWa1Fv/linux-4.15.0/mm/hugetlb.c:3310!
Oops: Exception in kernel mode, sig: 5 [#1]
LE SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in: kcm nfc af_alg caif_socket caif phonet fcrypt
CPU: 18 PID: 43243 Comm: trinity-subchil Tainted: G C E 4.15.0-10-generic #11-Ubuntu
NIP: c00000000036e764 LR: c00000000036ee48 CTR: 0000000000000009
REGS: c000003fbcdcf810 TRAP: 0700 Tainted: G C E (4.15.0-10-generic)
MSR: 9000000000029033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24002222 XER: 20040000
CFAR: c00000000036ee44 SOFTE: 1
NIP __unmap_hugepage_range+0xa4/0x760
LR __unmap_hugepage_range_final+0x28/0x50
Call Trace:
0x7115e4e00000 (unreliable)
__unmap_hugepage_range_final+0x28/0x50
unmap_single_vma+0x11c/0x190
unmap_vmas+0x94/0x140
exit_mmap+0x9c/0x1d0
mmput+0xa8/0x1d0
do_exit+0x360/0xc80
do_group_exit+0x60/0x100
SyS_exit_group+0x24/0x30
system_call+0x58/0x6c
---[ end trace ee88f958a1c62605 ]---
This bug was introduced by commit 31383c6865a5 ("mm, hugetlbfs:
introduce ->split() to vm_operations_struct"). A split function was
added to vm_operations_struct to determine if a mapping can be split.
This was mostly for device-dax and hugetlbfs mappings which have
specific alignment constraints.
Mappings initiated via shmget/shmat have their original vm_ops
overwritten with shm_vm_ops. shm_vm_ops functions will call back to the
original vm_ops if needed. Add such a split function to shm_vm_ops.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 31383c6865a5 ("mm, hugetlbfs: introduce ->split() to vm_operations_struct")
Signed-off-by: Mike Kravetz <[email protected]>
Reported-by: Laurent Dufour <[email protected]>
Reviewed-by: Laurent Dufour <[email protected]>
Tested-by: Laurent Dufour <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Manfred Spraul <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
ipc/shm.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -386,6 +386,17 @@ static int shm_fault(struct vm_fault *vm
return sfd->vm_ops->fault(vmf);
}
+static int shm_split(struct vm_area_struct *vma, unsigned long addr)
+{
+ struct file *file = vma->vm_file;
+ struct shm_file_data *sfd = shm_file_data(file);
+
+ if (sfd->vm_ops && sfd->vm_ops->split)
+ return sfd->vm_ops->split(vma, addr);
+
+ return 0;
+}
+
#ifdef CONFIG_NUMA
static int shm_set_policy(struct vm_area_struct *vma, struct mempolicy *new)
{
@@ -510,6 +521,7 @@ static const struct vm_operations_struct
.open = shm_open, /* callback for a new vm-area open */
.close = shm_close, /* callback for when the vm-area is released */
.fault = shm_fault,
+ .split = shm_split,
#if defined(CONFIG_NUMA)
.set_policy = shm_set_policy,
.get_policy = shm_get_policy,
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pierre-Yves MORDRET <[email protected]>
commit 771b7bf05339081019d22452ebcab6929372e13e upstream.
Before assigning returned setup structure check if not null
Fixes: 463a9215f3ca7600b5ff ("i2c: stm32f7: fix setup structure")
Signed-off-by: Pierre-Yves MORDRET <[email protected]>
Acked-by: Alexandre TORGUE <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/i2c/busses/i2c-stm32f7.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -887,6 +887,11 @@ static int stm32f7_i2c_probe(struct plat
}
setup = of_device_get_match_data(&pdev->dev);
+ if (!setup) {
+ dev_err(&pdev->dev, "Can't get device data\n");
+ ret = -ENODEV;
+ goto clk_free;
+ }
i2c_dev->setup = *setup;
ret = device_property_read_u32(i2c_dev->dev, "i2c-scl-rising-time-ns",
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Piggin <[email protected]>
commit ff6781fd1bb404d8a551c02c35c70cec1da17ff1 upstream.
force_external_irq_replay() can be called in the do_IRQ path with
interrupts hard enabled and soft disabled if may_hard_irq_enable() set
MSR[EE]=1. It updates local_paca->irq_happened with a load, modify,
store sequence. If a maskable interrupt hits during this sequence, it
will go to the masked handler to be marked pending in irq_happened.
This update will be lost when the interrupt returns and the store
instruction executes. This can result in unpredictable latencies,
timeouts, lockups, etc.
Fix this by ensuring hard interrupts are disabled before modifying
irq_happened.
This could cause any maskable asynchronous interrupt to get lost, but
it was noticed on P9 SMP system doing RDMA NVMe target over 100GbE,
so very high external interrupt rate and high IPI rate. The hang was
bisected down to enabling doorbell interrupts for IPIs. These provided
an interrupt type that could run at high rates in the do_IRQ path,
stressing the race.
Fixes: 1d607bb3bd60 ("powerpc/irq: Add mechanism to force a replay of interrupts")
Cc: [email protected] # v4.8+
Reported-by: Carol L. Soto <[email protected]>
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/irq.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -430,6 +430,14 @@ void force_external_irq_replay(void)
*/
WARN_ON(!arch_irqs_disabled());
+ /*
+ * Interrupts must always be hard disabled before irq_happened is
+ * modified (to prevent lost update in case of interrupt between
+ * load and store).
+ */
+ __hard_irq_disable();
+ local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
+
/* Indicate in the PACA that we have an interrupt to replay */
local_paca->irq_happened |= PACA_IRQ_EE;
}
On Fri, Apr 06, 2018 at 03:23:30PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.33 release.
> There are 67 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Apr 8 08:43:05 UTC 2018.
> Anything received after that time might be too late.
Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.
Summary
------------------------------------------------------------------------
kernel: 4.14.33-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: 78c25922bb37178a70c5fd4be7163760a1abb8e2
git describe: v4.14.32-68-g78c25922bb37
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.32-68-g78c25922bb37
No regressions (compared to build v4.14.32-54-g44b8826294a9)
Boards, architectures and test suites:
-------------------------------------
dragonboard-410c
* boot - fail: 1, pass: 19
* kselftest - skip: 20, pass: 45
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 2, pass: 61
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 1, pass: 21
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - pass: 14
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 148, pass: 1002
* ltp-timers-tests - skip: 1, pass: 12
hi6220-hikey - arm64
* boot - pass: 20
* kselftest - skip: 17, pass: 48
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 2, pass: 61
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 1, pass: 21
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 4, pass: 10
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 151, pass: 999
* ltp-timers-tests - skip: 1, pass: 12
juno-r2 - arm64
* boot - pass: 20
* kselftest - skip: 17, pass: 48
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 2, pass: 61
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 4, pass: 10
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 149, pass: 1001
* ltp-timers-tests - skip: 1, pass: 12
qemu_x86_64
* boot - pass: 22
* kselftest - skip: 22, pass: 58
* kselftest-vsyscall-mode-native - skip: 22, pass: 58
* kselftest-vsyscall-mode-none - skip: 22, pass: 58
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 1, pass: 13
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 148, pass: 1002
* ltp-timers-tests - skip: 1, pass: 12
x15 - arm
* boot - pass: 20
* kselftest - skip: 19, fail: 2, pass: 41
* libhugetlbfs - skip: 1, fail: 1, pass: 86
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, fail: 2, pass: 62
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 2, pass: 61
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 2, pass: 20
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 1, pass: 13
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 97, pass: 1053
* ltp-timers-tests - skip: 1, pass: 12
x86_64
* boot - pass: 22
* kselftest - skip: 19, pass: 61
* kselftest-vsyscall-mode-native - skip: 19, pass: 61
* kselftest-vsyscall-mode-none - skip: 19, fail: 1, pass: 60
* libhugetlbfs - skip: 1, pass: 89
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 1, pass: 62
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 5, pass: 9
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 119, pass: 1031
* ltp-timers-tests - skip: 1, pass: 12
--
Linaro QA (beta)
https://qa-reports.linaro.org
On 04/06/2018 07:23 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.33 release.
> There are 67 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Apr 8 08:43:05 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.33-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah