Hi,
This patch adds linux input layer based support for infrared remote
controls. It adds two new modules:
* ir-kbd-i2c supports i2c-based IR receivers.
* ir-kbd-gpio supports IR receivers connected to the bt878 gpio pins.
This patch depends on the ir-input patch and the bttv driver update.
Gerd
diff -u linux-2.6.1/drivers/media/video/Makefile linux/drivers/media/video/Makefile
--- linux-2.6.1/drivers/media/video/Makefile 2004-01-14 15:09:36.000000000 +0100
+++ linux/drivers/media/video/Makefile 2004-01-14 15:09:36.000000000 +0100
@@ -11,7 +11,7 @@
obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o v4l1-compat.o
obj-$(CONFIG_VIDEO_BT848) += bttv.o msp3400.o tvaudio.o \
- tda7432.o tda9875.o
+ tda7432.o tda9875.o ir-kbd-i2c.o ir-kbd-gpio.o
obj-$(CONFIG_SOUND_TVMIXER) += tvmixer.o
obj-$(CONFIG_VIDEO_ZR36120) += zoran.o
diff -u linux-2.6.1/drivers/media/video/ir-kbd-gpio.c linux/drivers/media/video/ir-kbd-gpio.c
--- linux-2.6.1/drivers/media/video/ir-kbd-gpio.c 2004-01-14 15:09:36.000000000 +0100
+++ linux/drivers/media/video/ir-kbd-gpio.c 2004-01-14 15:09:36.000000000 +0100
@@ -0,0 +1,377 @@
+/*
+ * Copyright (c) 2003 Gerd Knorr
+ * Copyright (c) 2003 Pavel Machek
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/pci.h>
+
+#include <media/ir-common.h>
+
+#include "bttv.h"
+
+/* ---------------------------------------------------------------------- */
+
+static IR_KEYTAB_TYPE ir_codes_avermedia[IR_KEYTAB_SIZE] = {
+ [ 17 ] = KEY_KP0,
+ [ 20 ] = KEY_KP1,
+ [ 12 ] = KEY_KP2,
+ [ 28 ] = KEY_KP3,
+ [ 18 ] = KEY_KP4,
+ [ 10 ] = KEY_KP5,
+ [ 26 ] = KEY_KP6,
+ [ 22 ] = KEY_KP7,
+ [ 14 ] = KEY_KP8,
+ [ 30 ] = KEY_KP9,
+
+ [ 24 ] = KEY_EJECTCD, // Unmarked on my controller
+ [ 0 ] = KEY_POWER,
+ [ 9 ] = BTN_LEFT, // DISPLAY/L
+ [ 25 ] = BTN_RIGHT, // LOOP/R
+ [ 5 ] = KEY_MUTE,
+ [ 19 ] = KEY_RECORD,
+ [ 11 ] = KEY_PAUSE,
+ [ 27 ] = KEY_STOP,
+ [ 15 ] = KEY_VOLUMEDOWN,
+ [ 31 ] = KEY_VOLUMEUP,
+
+ [ 16 ] = KEY_TUNER, // TV/FM
+ [ 8 ] = KEY_CD,
+ [ 4 ] = KEY_VIDEO,
+ [ 2 ] = KEY_AUDIO,
+ [ 6 ] = KEY_ZOOM, // full screen
+ [ 1 ] = KEY_INFO, // preview
+ [ 21 ] = KEY_SEARCH, // autoscan
+ [ 13 ] = KEY_STOP, // freeze
+ [ 29 ] = KEY_RECORD, // capture
+ [ 3 ] = KEY_PLAY, // unmarked
+ [ 24 ] = KEY_RED, // unmarked
+ [ 7 ] = KEY_GREEN, // unmarked
+
+#if 0
+ [ 16 ] = KEY_YELLOW, // unmarked
+ [ 8 ] = KEY_CHANNELDOWN,
+ [ 24 ] = KEY_CHANNELUP,
+ [ 0 ] = KEY_BLUE, // unmarked
+#endif
+};
+
+static IR_KEYTAB_TYPE winfast_codes[IR_KEYTAB_SIZE] = {
+ [ 5 ] = KEY_KP1,
+ [ 6 ] = KEY_KP2,
+ [ 7 ] = KEY_KP3,
+ [ 9 ] = KEY_KP4,
+ [ 10 ] = KEY_KP5,
+ [ 11 ] = KEY_KP6,
+ [ 13 ] = KEY_KP7,
+ [ 14 ] = KEY_KP8,
+ [ 15 ] = KEY_KP9,
+ [ 18 ] = KEY_KP0,
+
+ [ 0 ] = KEY_POWER,
+// [ 27 ] = MTS button
+ [ 2 ] = KEY_TUNER, // TV/FM
+ [ 30 ] = KEY_VIDEO,
+// [ 22 ] = display button
+ [ 4 ] = KEY_VOLUMEUP,
+ [ 8 ] = KEY_VOLUMEDOWN,
+ [ 12 ] = KEY_CHANNELUP,
+ [ 16 ] = KEY_CHANNELDOWN,
+ [ 3 ] = KEY_ZOOM, // fullscreen
+ [ 31 ] = KEY_SUBTITLE, // closed caption/teletext
+ [ 32 ] = KEY_SLEEP,
+// [ 41 ] = boss key
+ [ 20 ] = KEY_MUTE,
+ [ 43 ] = KEY_RED,
+ [ 44 ] = KEY_GREEN,
+ [ 45 ] = KEY_YELLOW,
+ [ 46 ] = KEY_BLUE,
+ [ 24 ] = KEY_KPPLUS, //fine tune +
+ [ 25 ] = KEY_KPMINUS, //fine tune -
+// [ 42 ] = picture in picture
+ [ 33 ] = KEY_KPDOT,
+ [ 19 ] = KEY_KPENTER,
+// [ 17 ] = recall
+ [ 34 ] = KEY_BACK,
+ [ 35 ] = KEY_PLAYPAUSE,
+ [ 36 ] = KEY_NEXT,
+// [ 37 ] = time shifting
+ [ 38 ] = KEY_STOP,
+ [ 39 ] = KEY_RECORD
+// [ 40 ] = snapshot
+};
+
+static IR_KEYTAB_TYPE ir_codes_pixelview[IR_KEYTAB_SIZE] = {
+ [ 2 ] = KEY_KP0,
+ [ 1 ] = KEY_KP1,
+ [ 11 ] = KEY_KP2,
+ [ 27 ] = KEY_KP3,
+ [ 5 ] = KEY_KP4,
+ [ 9 ] = KEY_KP5,
+ [ 21 ] = KEY_KP6,
+ [ 6 ] = KEY_KP7,
+ [ 10 ] = KEY_KP8,
+ [ 18 ] = KEY_KP9,
+
+ [ 3 ] = KEY_TUNER, // TV/FM
+ [ 7 ] = KEY_SEARCH, // scan
+ [ 28 ] = KEY_ZOOM, // full screen
+ [ 30 ] = KEY_POWER,
+ [ 23 ] = KEY_VOLUMEDOWN,
+ [ 31 ] = KEY_VOLUMEUP,
+ [ 20 ] = KEY_CHANNELDOWN,
+ [ 22 ] = KEY_CHANNELUP,
+ [ 24 ] = KEY_MUTE,
+
+ [ 0 ] = KEY_LIST, // source
+ [ 19 ] = KEY_INFO, // loop
+ [ 16 ] = KEY_LAST, // +100
+ [ 13 ] = KEY_CLEAR, // reset
+ [ 12 ] = BTN_RIGHT, // fun++
+ [ 4 ] = BTN_LEFT, // fun--
+ [ 14 ] = KEY_GOTO, // function
+ [ 15 ] = KEY_STOP, // freeze
+};
+
+/* ---------------------------------------------------------------------- */
+
+struct IR {
+ struct bttv_sub_device *sub;
+ struct input_dev input;
+ struct ir_input_state ir;
+ char name[32];
+ char phys[32];
+ u32 mask_keycode;
+ u32 mask_keydown;
+ u32 mask_keyup;
+
+ int polling;
+ u32 last_gpio;
+ struct work_struct work;
+ struct timer_list timer;
+};
+
+static int debug = 0; /* debug level (0,1,2) */
+MODULE_PARM(debug,"i");
+
+#define DEVNAME "ir-kbd-gpio"
+#define dprintk(fmt, arg...) if (debug) \
+ printk(KERN_DEBUG DEVNAME ": " fmt , ## arg)
+
+static void ir_irq(struct bttv_sub_device *sub);
+static int ir_probe(struct device *dev);
+static int ir_remove(struct device *dev);
+
+static struct bttv_sub_driver driver = {
+ .drv.name = DEVNAME,
+ .drv.probe = ir_probe,
+ .drv.remove = ir_remove,
+ .gpio_irq = ir_irq,
+};
+
+/* ---------------------------------------------------------------------- */
+
+static void ir_handle_key(struct IR *ir)
+{
+ u32 gpio,data;
+
+ /* read gpio value */
+ gpio = bttv_gpio_read(ir->sub->core);
+ if (ir->polling) {
+ if (ir->last_gpio == gpio)
+ return;
+ ir->last_gpio = gpio;
+ }
+
+ /* extract data */
+ data = ir_extract_bits(gpio, ir->mask_keycode);
+ dprintk(DEVNAME ": irq gpio=0x%x code=%d | %s%s%s\n",
+ gpio, data,
+ ir->polling ? "poll" : "irq",
+ (gpio & ir->mask_keydown) ? " down" : "",
+ (gpio & ir->mask_keyup) ? " up" : "");
+
+ if (ir->mask_keydown) {
+ /* bit set on keydown */
+ if (gpio & ir->mask_keydown) {
+ ir_input_keydown(&ir->input,&ir->ir,data,data);
+ } else {
+ ir_input_nokey(&ir->input,&ir->ir);
+ }
+
+ } else if (ir->mask_keyup) {
+ /* bit cleared on keydown */
+ if (0 == (gpio & ir->mask_keyup)) {
+ ir_input_keydown(&ir->input,&ir->ir,data,data);
+ } else {
+ ir_input_nokey(&ir->input,&ir->ir);
+ }
+
+ } else {
+ /* can't disturgissh keydown/up :-/ */
+ ir_input_keydown(&ir->input,&ir->ir,data,data);
+ ir_input_nokey(&ir->input,&ir->ir);
+ }
+}
+
+static void ir_irq(struct bttv_sub_device *sub)
+{
+ struct IR *ir = dev_get_drvdata(&sub->dev);
+
+ if (!ir->polling)
+ ir_handle_key(ir);
+}
+
+static void ir_timer(unsigned long data)
+{
+ struct IR *ir = (struct IR*)data;
+
+ schedule_work(&ir->work);
+}
+
+static void ir_work(void *data)
+{
+ struct IR *ir = data;
+ unsigned long timeout;
+
+ ir_handle_key(ir);
+ timeout = jiffies + (ir->polling * HZ / 1000);
+ mod_timer(&ir->timer, timeout);
+}
+
+/* ---------------------------------------------------------------------- */
+
+static int ir_probe(struct device *dev)
+{
+ struct bttv_sub_device *sub = to_bttv_sub_dev(dev);
+ struct IR *ir;
+ IR_KEYTAB_TYPE *ir_codes = NULL;
+ int ir_type = IR_TYPE_OTHER;
+
+ ir = kmalloc(sizeof(*ir),GFP_KERNEL);
+ if (NULL == ir)
+ return -ENOMEM;
+ memset(ir,0,sizeof(*ir));
+
+ /* detect & configure */
+ switch (sub->core->type) {
+ case BTTV_AVERMEDIA:
+ case BTTV_AVPHONE98:
+ ir_codes = ir_codes_avermedia;
+ ir->mask_keycode = 0xf80000;
+ ir->mask_keydown = 0x010000;
+ break;
+ case BTTV_WINFAST2000:
+ ir_codes = winfast_codes;
+ ir->mask_keycode = 0x8f8;
+ break;
+ case BTTV_PV_BT878P_9B:
+ case BTTV_PV_BT878P_PLUS:
+ ir_codes = ir_codes_pixelview;
+ ir->mask_keycode = 0x001f00;
+ ir->mask_keyup = 0x008000;
+ ir->polling = 50; // ms
+ break;
+ }
+ if (NULL == ir_codes) {
+ kfree(ir);
+ return -ENODEV;
+ }
+
+ /* init hardware-specific stuff */
+ bttv_gpio_inout(sub->core, ir->mask_keycode | ir->mask_keydown, 0);
+ ir->sub = sub;
+
+ /* init input device */
+ snprintf(ir->name, sizeof(ir->name), "bttv IR (card=%d)",
+ sub->core->type);
+ snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
+ pci_name(sub->core->pci));
+
+ ir_input_init(&ir->input, &ir->ir, ir_type, ir_codes);
+ ir->input.name = ir->name;
+ ir->input.phys = ir->phys;
+ ir->input.id.bustype = BUS_PCI;
+ ir->input.id.version = 1;
+ if (sub->core->pci->subsystem_vendor) {
+ ir->input.id.vendor = sub->core->pci->subsystem_vendor;
+ ir->input.id.product = sub->core->pci->subsystem_device;
+ } else {
+ ir->input.id.vendor = sub->core->pci->vendor;
+ ir->input.id.product = sub->core->pci->device;
+ }
+
+ if (ir->polling) {
+ INIT_WORK(&ir->work, ir_work, ir);
+ init_timer(&ir->timer);
+ ir->timer.function = ir_timer;
+ ir->timer.data = (unsigned long)ir;
+ schedule_work(&ir->work);
+ }
+
+ /* all done */
+ dev_set_drvdata(dev,ir);
+ input_register_device(&ir->input);
+ printk(DEVNAME ": %s detected at %s\n",ir->input.name,ir->input.phys);
+
+ return 0;
+}
+
+static int ir_remove(struct device *dev)
+{
+ struct IR *ir = dev_get_drvdata(dev);
+
+ if (ir->polling) {
+ del_timer(&ir->timer);
+ flush_scheduled_work();
+ }
+
+ input_unregister_device(&ir->input);
+ kfree(ir);
+ return 0;
+}
+
+/* ---------------------------------------------------------------------- */
+
+MODULE_AUTHOR("Gerd Knorr, Pavel Machek");
+MODULE_DESCRIPTION("input driver for bt8x8 gpio IR remote controls");
+MODULE_LICENSE("GPL");
+
+static int ir_init(void)
+{
+ return bttv_sub_register(&driver, "remote");
+}
+
+static void ir_fini(void)
+{
+ bttv_sub_unregister(&driver);
+}
+
+module_init(ir_init);
+module_exit(ir_fini);
+
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff -u linux-2.6.1/drivers/media/video/ir-kbd-i2c.c linux/drivers/media/video/ir-kbd-i2c.c
--- linux-2.6.1/drivers/media/video/ir-kbd-i2c.c 2004-01-14 15:09:36.000000000 +0100
+++ linux/drivers/media/video/ir-kbd-i2c.c 2004-01-14 15:09:36.000000000 +0100
@@ -0,0 +1,372 @@
+/*
+ * keyboard input driver for i2c IR remote controls
+ *
+ * Copyright (c) 2000-2003 Gerd Knorr <[email protected]>
+ * modified for PixelView (BT878P+W/FM) by
+ * Michal Kochanowicz <[email protected]>
+ * Christoph Bartelmus <[email protected]>
+ * modified for KNC ONE TV Station/Anubis Typhoon TView Tuner by
+ * Ulrich Mueller <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+
+#include <asm/semaphore.h>
+
+#include <media/ir-common.h>
+
+struct IR;
+struct IR {
+ struct i2c_client c;
+ struct input_dev input;
+ struct ir_input_state ir;
+
+ struct work_struct work;
+ struct timer_list timer;
+ char phys[32];
+ int (*get_key)(struct IR*, u32*, u32*);
+};
+
+/* ----------------------------------------------------------------------- */
+/* insmod parameters */
+
+static int debug = 0; /* debug level (0,1,2) */
+MODULE_PARM(debug,"i");
+
+#define DEVNAME "ir-kbd-i2c"
+#define dprintk(level, fmt, arg...) if (debug >= level) \
+ printk(KERN_DEBUG DEVNAME ": " fmt , ## arg)
+
+/* ----------------------------------------------------------------------- */
+
+static inline int reverse(int data, int bits)
+{
+ int i,c;
+
+ for (c=0,i=0; i<bits; i++) {
+ c |= (((data & (1<<i)) ? 1:0)) << (bits-1-i);
+ }
+ return c;
+}
+
+static int get_key_haup(struct IR *ir, u32 *ir_key, u32 *ir_raw)
+{
+ unsigned char buf[3];
+ int start, toggle, dev, code;
+
+ /* poll IR chip */
+ if (3 != i2c_master_recv(&ir->c,buf,3))
+ return -EIO;
+
+ /* split rc5 data block ... */
+ start = (buf[0] >> 6) & 3;
+ toggle = (buf[0] >> 5) & 1;
+ dev = buf[0] & 0x1f;
+ code = (buf[1] >> 2) & 0x3f;
+
+ if (3 != start)
+ /* no key pressed */
+ return 0;
+ dprintk(1,"ir hauppauge (rc5): s%d t%d dev=%d code=%d\n",
+ start, toggle, dev, code);
+
+ /* return key */
+ *ir_key = code;
+ *ir_raw = (start << 12) | (toggle << 11) | (dev << 6) | code;
+ return 1;
+}
+
+static int get_key_pixelview(struct IR *ir, u32 *ir_key, u32 *ir_raw)
+{
+ unsigned char b;
+
+ /* poll IR chip */
+ if (1 != i2c_master_recv(&ir->c,&b,1)) {
+ dprintk(1,"read error\n");
+ return -EIO;
+ }
+ *ir_key = b;
+ *ir_raw = b;
+ return 1;
+}
+
+static int get_key_pv951(struct IR *ir, u32 *ir_key, u32 *ir_raw)
+{
+ unsigned char b;
+
+ /* poll IR chip */
+ if (1 != i2c_master_recv(&ir->c,&b,1)) {
+ dprintk(1,"read error\n");
+ return -EIO;
+ }
+
+ /* ignore 0xaa */
+ if (b==0xaa)
+ return 0;
+ dprintk(2,"key %02x\n", b);
+
+ *ir_key = b;
+ *ir_raw = b;
+ return 1;
+}
+
+static int get_key_knc1(struct IR *ir, u32 *ir_key, u32 *ir_raw)
+{
+ unsigned char b;
+
+ /* poll IR chip */
+ if (1 != i2c_master_recv(&ir->c,&b,1)) {
+ dprintk(1,"read error\n");
+ return -EIO;
+ }
+
+ /* it seems that 0xFE indicates that a button is still hold
+ down, while 0xFF indicates that no button is hold
+ down. 0xFE sequences are sometimes interrupted by 0xFF */
+
+ dprintk(2,"key %02x\n", b);
+
+ if (b == 0xFF)
+ return 0;
+
+ if (b == 0xFE)
+ /* keep old data */
+ return 1;
+
+ *ir_key = b;
+ *ir_raw = b;
+ return 1;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static void ir_key_poll(struct IR *ir)
+{
+ u32 ir_key, ir_raw;
+ int rc;
+
+ dprintk(2,"ir_poll_key\n");
+ rc = ir->get_key(ir, &ir_key, &ir_raw);
+ if (rc < 0) {
+ dprintk(2,"error\n");
+ return;
+ }
+
+ if (0 == rc) {
+ ir_input_nokey(&ir->input,&ir->ir);
+ } else {
+ ir_input_keydown(&ir->input,&ir->ir, ir_key, ir_raw);
+ }
+}
+
+static void ir_timer(unsigned long data)
+{
+ struct IR *ir = (struct IR*)data;
+ schedule_work(&ir->work);
+}
+
+static void ir_work(void *data)
+{
+ struct IR *ir = data;
+ ir_key_poll(ir);
+ mod_timer(&ir->timer, jiffies+HZ/10);
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int ir_attach(struct i2c_adapter *adap, int addr,
+ unsigned short flags, int kind);
+static int ir_detach(struct i2c_client *client);
+static int ir_probe(struct i2c_adapter *adap);
+
+static struct i2c_driver driver = {
+ .name = "ir remote kbd driver",
+ .id = I2C_DRIVERID_EXP3, /* FIXME */
+ .flags = I2C_DF_NOTIFY,
+ .attach_adapter = ir_probe,
+ .detach_client = ir_detach,
+};
+
+static struct i2c_client client_template =
+{
+ I2C_DEVNAME("unset"),
+ .driver = &driver
+};
+
+static int ir_attach(struct i2c_adapter *adap, int addr,
+ unsigned short flags, int kind)
+{
+ IR_KEYTAB_TYPE *ir_codes = NULL;
+ char *name;
+ int ir_type;
+ struct IR *ir;
+
+ if (NULL == (ir = kmalloc(sizeof(struct IR),GFP_KERNEL)))
+ return -ENOMEM;
+ memset(ir,0,sizeof(*ir));
+ ir->c = client_template;
+
+ i2c_set_clientdata(&ir->c, ir);
+ ir->c.adapter = adap;
+ ir->c.addr = addr;
+
+ switch(addr) {
+ case 0x64:
+ name = "Pixelview";
+ ir->get_key = get_key_pixelview;
+ ir_type = IR_TYPE_OTHER;
+ ir_codes = ir_codes_empty;
+ break;
+ case 0x4b:
+ name = "PV951";
+ ir->get_key = get_key_pv951;
+ ir_type = IR_TYPE_OTHER;
+ ir_codes = ir_codes_empty;
+ break;
+ case 0x18:
+ case 0x1a:
+ name = "Hauppauge";
+ ir->get_key = get_key_haup;
+ ir_type = IR_TYPE_RC5;
+ ir_codes = ir_codes_rc5_tv;
+ break;
+ case 0x30:
+ name = "KNC One";
+ ir->get_key = get_key_knc1;
+ ir_type = IR_TYPE_OTHER;
+ ir_codes = ir_codes_empty;
+ break;
+ default:
+ /* shouldn't happen */
+ printk(DEVNAME ": Huh? unknown i2c address (0x%02x)?\n",addr);
+ kfree(ir);
+ return -1;
+ }
+
+ /* register i2c device */
+ i2c_attach_client(&ir->c);
+ snprintf(ir->c.name, sizeof(ir->c.name), "i2c IR (%s)", name);
+ snprintf(ir->phys, sizeof(ir->phys), "%s/%s/ir0",
+ ir->c.adapter->dev.bus_id,
+ ir->c.dev.bus_id);
+
+ /* init + register input device */
+ ir_input_init(&ir->input,&ir->ir,ir_type,ir_codes);
+ ir->input.id.bustype = BUS_I2C;
+ ir->input.name = ir->c.name;
+ ir->input.phys = ir->phys;
+ input_register_device(&ir->input);
+ printk(DEVNAME ": %s detected at %s\n",ir->input.name,ir->input.phys);
+
+ /* start polling via eventd */
+ INIT_WORK(&ir->work, ir_work, ir);
+ init_timer(&ir->timer);
+ ir->timer.function = ir_timer;
+ ir->timer.data = (unsigned long)ir;
+ schedule_work(&ir->work);
+
+ return 0;
+}
+
+static int ir_detach(struct i2c_client *client)
+{
+ struct IR *ir = i2c_get_clientdata(client);
+
+ /* kill outstanding polls */
+ del_timer(&ir->timer);
+ flush_scheduled_work();
+
+ /* unregister devices */
+ input_unregister_device(&ir->input);
+ i2c_detach_client(&ir->c);
+
+ /* free memory */
+ kfree(ir);
+ return 0;
+}
+
+static int ir_probe(struct i2c_adapter *adap)
+{
+
+ /* The external IR receiver is at i2c address 0x34 (0x35 for
+ reads). Future Hauppauge cards will have an internal
+ receiver at 0x30 (0x31 for reads). In theory, both can be
+ fitted, and Hauppauge suggest an external overrides an
+ internal.
+
+ That's why we probe 0x1a (~0x34) first. CB
+ */
+
+ static const int probe[] = { 0x1a, 0x18, 0x4b, 0x64, 0x30, -1};
+ struct i2c_client c; char buf; int i,rc;
+
+ if (adap->id == (I2C_ALGO_BIT | I2C_HW_B_BT848)) {
+ memset(&c,0,sizeof(c));
+ c.adapter = adap;
+ for (i = 0; -1 != probe[i]; i++) {
+ c.addr = probe[i];
+ rc = i2c_master_recv(&c,&buf,1);
+ dprintk(1,"probe 0x%02x @ %s: %s\n",
+ probe[i], adap->name,
+ (1 == rc) ? "yes" : "no");
+ if (1 == rc) {
+ ir_attach(adap,probe[i],0,0);
+ break;
+ }
+ }
+ }
+ return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+MODULE_AUTHOR("Gerd Knorr, Michal Kochanowicz, Christoph Bartelmus, Ulrich Mueller");
+MODULE_DESCRIPTION("input driver for i2c IR remote controls");
+MODULE_LICENSE("GPL");
+
+static int ir_init(void)
+{
+ i2c_add_driver(&driver);
+ return 0;
+}
+
+static void ir_fini(void)
+{
+ i2c_del_driver(&driver);
+}
+
+module_init(ir_init);
+module_exit(ir_fini);
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
--
You have a new virus in /var/mail/kraxel