Hello !
Sorry to post a seconfd message on the list, I am only trying
to get an answern for this - it seems so - DMA-problem ??
I have some
problems with a brand new Plextor-drive, PX-W5224TA/T3B, I cannot
mount any CD or burn a CDR or CD-RW, except if I disable DMA with
following command :# hdparm -d0 /dev/hdd , a little bit annoying,
isn't it ?
If I insert a cdrom in the drive the led doesn't go out, it flashes
as usual but it stays green.
It seems to be a DMA-problem or a kernel-bug ???
Its only a supposition, I am a Linux-newbie, and I am looking
for an explanation and a solution ....
By mounting a cdrom I get following error messages :
Jan 11 20:46:00 ishwara kernel: scsi : aborting command due to timeout
: pid 102, scsi0, channel 0, id 1, lun 0 0x28 00 00 00 00 10 00 00 01 00
Jan 11 20:46:00 ishwara kernel: hdd: error waiting for DMA
Jan 11 20:46:00 ishwara kernel: hdd: dma timeout retry: status=0x7f {
DriveReady DeviceFault SeekComplete DataRequest CorrectedError Index
Error } Jan 11 20:46:00 ishwara kernel: hdd: dma timeout retry:
error=0x7f Jan 11 20:46:00 ishwara kernel: hdd: DMA disabled
Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
Jan 11 20:46:00 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
Jan 11 20:46:00 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
Jan 11 20:46:07 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
Jan 11 20:46:07 ishwara kernel: scsi0 channel 0 : resetting for second
half of retries. Jan 11 20:46:07 ishwara kernel: SCSI bus is being reset
for host 0 channel 0. Jan 11 20:46:07 ishwara kernel: hdd: status
timeout: status=0x80 { Busy } Jan 11 20:46:07 ishwara kernel: hdd: drive
not ready for command Jan 11 20:46:07 ishwara kernel: hdd: ATAPI reset
complete Jan 11 20:46:32 ishwara kernel: scsi : aborting command due to
timeout : pid 103, scsi0, channel 0, id 1, lun 0 0x28 00 00 00 00 10 00
rive not ready for command
And then I have a freeze or at least a blocking of the sysem.
I have to reboot.
Could someone give me an explanation of what is happening and a way to
solve the problem .... is this a kernel-bug ? Or an incompatibility
between the motherboard and the drive ??
If you choose to help me, please don't be to esoteric, as I already
said, I am a newbie.
Please, could you Cc all answers to the adress :
[email protected]
My apologizes for my english ....
Claude
System : Pentium 2,8C
Asus P4P800 DeLuxe
Intel I865PE
Is it possible that your ide-cable can't handle the higher dma speeds
and makes errors? is it udma compatible? have you looked for a
firmware update for the burner @ http://www.plextor.com?
andreas
----- Original Message -----
From: "claude parisot" <[email protected]>
To: <[email protected]>
Cc: <[email protected]>
Sent: Friday, January 16, 2004 8:24 PM
Subject: DMA problem
> Hello !
>
> Sorry to post a seconfd message on the list, I am only trying
> to get an answern for this - it seems so - DMA-problem ??
>
>
> I have some
> problems with a brand new Plextor-drive, PX-W5224TA/T3B, I cannot
> mount any CD or burn a CDR or CD-RW, except if I disable DMA with
> following command :# hdparm -d0 /dev/hdd , a little bit annoying,
> isn't it ?
>
> If I insert a cdrom in the drive the led doesn't go out, it flashes
> as usual but it stays green.
>
> It seems to be a DMA-problem or a kernel-bug ???
> Its only a supposition, I am a Linux-newbie, and I am looking
> for an explanation and a solution ....
>
> By mounting a cdrom I get following error messages :
>
> Jan 11 20:46:00 ishwara kernel: scsi : aborting command due to timeout
> : pid 102, scsi0, channel 0, id 1, lun 0 0x28 00 00 00 00 10 00 00 01 00
> Jan 11 20:46:00 ishwara kernel: hdd: error waiting for DMA
> Jan 11 20:46:00 ishwara kernel: hdd: dma timeout retry: status=0x7f {
> DriveReady DeviceFault SeekComplete DataRequest CorrectedError Index
> Error } Jan 11 20:46:00 ishwara kernel: hdd: dma timeout retry:
> error=0x7f Jan 11 20:46:00 ishwara kernel: hdd: DMA disabled
> Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
> Jan 11 20:46:00 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
> Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
> Jan 11 20:46:00 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
> Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
> Jan 11 20:46:07 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
> Jan 11 20:46:07 ishwara kernel: scsi0 channel 0 : resetting for second
> half of retries. Jan 11 20:46:07 ishwara kernel: SCSI bus is being reset
> for host 0 channel 0. Jan 11 20:46:07 ishwara kernel: hdd: status
> timeout: status=0x80 { Busy } Jan 11 20:46:07 ishwara kernel: hdd: drive
> not ready for command Jan 11 20:46:07 ishwara kernel: hdd: ATAPI reset
> complete Jan 11 20:46:32 ishwara kernel: scsi : aborting command due to
> timeout : pid 103, scsi0, channel 0, id 1, lun 0 0x28 00 00 00 00 10 00
> rive not ready for command
>
> And then I have a freeze or at least a blocking of the sysem.
> I have to reboot.
>
> Could someone give me an explanation of what is happening and a way to
> solve the problem .... is this a kernel-bug ? Or an incompatibility
> between the motherboard and the drive ??
>
> If you choose to help me, please don't be to esoteric, as I already
> said, I am a newbie.
>
> Please, could you Cc all answers to the adress :
>
> [email protected]
>
> My apologizes for my english ....
>
>
> Claude
>
> System : Pentium 2,8C
> Asus P4P800 DeLuxe
> Intel I865PE
>
>
>
>
>
>
>
>
>
>
>
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
>
There are many reasons for this Problem. Which Kernel Version are you running
(uname -a). Which distribution? SuSE, Debian, Mandrake, RedHat?
On Friday 16 January 2004 20:24, claude parisot wrote:
> Hello !
>
> Sorry to post a seconfd message on the list, I am only trying
> to get an answern for this - it seems so - DMA-problem ??
>
>
> I have some
> problems with a brand new Plextor-drive, PX-W5224TA/T3B, I cannot
> mount any CD or burn a CDR or CD-RW, except if I disable DMA with
> following command :# hdparm -d0 /dev/hdd , a little bit annoying,
> isn't it ?
>
> If I insert a cdrom in the drive the led doesn't go out, it flashes
> as usual but it stays green.
>
> It seems to be a DMA-problem or a kernel-bug ???
> Its only a supposition, I am a Linux-newbie, and I am looking
> for an explanation and a solution ....
>
> By mounting a cdrom I get following error messages :
>
> Jan 11 20:46:00 ishwara kernel: scsi : aborting command due to timeout
>
> : pid 102, scsi0, channel 0, id 1, lun 0 0x28 00 00 00 00 10 00 00 01 00
>
> Jan 11 20:46:00 ishwara kernel: hdd: error waiting for DMA
> Jan 11 20:46:00 ishwara kernel: hdd: dma timeout retry: status=0x7f {
> DriveReady DeviceFault SeekComplete DataRequest CorrectedError Index
> Error } Jan 11 20:46:00 ishwara kernel: hdd: dma timeout retry:
> error=0x7f Jan 11 20:46:00 ishwara kernel: hdd: DMA disabled
> Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
> Jan 11 20:46:00 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
> Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
> Jan 11 20:46:00 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
> Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
> Jan 11 20:46:07 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
> Jan 11 20:46:07 ishwara kernel: scsi0 channel 0 : resetting for second
> half of retries. Jan 11 20:46:07 ishwara kernel: SCSI bus is being reset
> for host 0 channel 0. Jan 11 20:46:07 ishwara kernel: hdd: status
> timeout: status=0x80 { Busy } Jan 11 20:46:07 ishwara kernel: hdd: drive
> not ready for command Jan 11 20:46:07 ishwara kernel: hdd: ATAPI reset
> complete Jan 11 20:46:32 ishwara kernel: scsi : aborting command due to
> timeout : pid 103, scsi0, channel 0, id 1, lun 0 0x28 00 00 00 00 10 00
> rive not ready for command
>
> And then I have a freeze or at least a blocking of the sysem.
> I have to reboot.
>
> Could someone give me an explanation of what is happening and a way to
> solve the problem .... is this a kernel-bug ? Or an incompatibility
> between the motherboard and the drive ??
>
> If you choose to help me, please don't be to esoteric, as I already
> said, I am a newbie.
>
> Please, could you Cc all answers to the adress :
>
> [email protected]
>
> My apologizes for my english ....
>
>
> Claude
>
> System : Pentium 2,8C
> Asus P4P800 DeLuxe
> Intel I865PE
>
>
>
>
>
>
>
>
>
>
>
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
If those options don't work, you might try dropping down the dma mode by
one. I have a Maxtor drive that does something like that with my
Promise PDC20269 when trying to use UDMA 2, but it works fine in UDMA 1.
-Wes-
Andreas Unterkircher wrote:
>Is it possible that your ide-cable can't handle the higher dma speeds
>and makes errors? is it udma compatible? have you looked for a
>firmware update for the burner @ http://www.plextor.com?
>
>andreas
>
>
>----- Original Message -----
>From: "claude parisot" <[email protected]>
>To: <[email protected]>
>Cc: <[email protected]>
>Sent: Friday, January 16, 2004 8:24 PM
>Subject: DMA problem
>
>
>
>
>> Hello !
>>
>>Sorry to post a seconfd message on the list, I am only trying
>>to get an answern for this - it seems so - DMA-problem ??
>>
>>
>>I have some
>>problems with a brand new Plextor-drive, PX-W5224TA/T3B, I cannot
>>mount any CD or burn a CDR or CD-RW, except if I disable DMA with
>>following command :# hdparm -d0 /dev/hdd , a little bit annoying,
>>isn't it ?
>>
>>If I insert a cdrom in the drive the led doesn't go out, it flashes
>>as usual but it stays green.
>>
>>It seems to be a DMA-problem or a kernel-bug ???
>>Its only a supposition, I am a Linux-newbie, and I am looking
>>for an explanation and a solution ....
>>
>>By mounting a cdrom I get following error messages :
>>
>>Jan 11 20:46:00 ishwara kernel: scsi : aborting command due to timeout
>>: pid 102, scsi0, channel 0, id 1, lun 0 0x28 00 00 00 00 10 00 00 01 00
>>Jan 11 20:46:00 ishwara kernel: hdd: error waiting for DMA
>>Jan 11 20:46:00 ishwara kernel: hdd: dma timeout retry: status=0x7f {
>>DriveReady DeviceFault SeekComplete DataRequest CorrectedError Index
>>Error } Jan 11 20:46:00 ishwara kernel: hdd: dma timeout retry:
>>error=0x7f Jan 11 20:46:00 ishwara kernel: hdd: DMA disabled
>>Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
>>Jan 11 20:46:00 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
>>Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
>>Jan 11 20:46:00 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
>>Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
>>Jan 11 20:46:07 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
>>Jan 11 20:46:07 ishwara kernel: scsi0 channel 0 : resetting for second
>>half of retries. Jan 11 20:46:07 ishwara kernel: SCSI bus is being reset
>>for host 0 channel 0. Jan 11 20:46:07 ishwara kernel: hdd: status
>>timeout: status=0x80 { Busy } Jan 11 20:46:07 ishwara kernel: hdd: drive
>>not ready for command Jan 11 20:46:07 ishwara kernel: hdd: ATAPI reset
>>complete Jan 11 20:46:32 ishwara kernel: scsi : aborting command due to
>>timeout : pid 103, scsi0, channel 0, id 1, lun 0 0x28 00 00 00 00 10 00
>>rive not ready for command
>>
>>And then I have a freeze or at least a blocking of the sysem.
>>I have to reboot.
>>
>>Could someone give me an explanation of what is happening and a way to
>>solve the problem .... is this a kernel-bug ? Or an incompatibility
>>between the motherboard and the drive ??
>>
>>If you choose to help me, please don't be to esoteric, as I already
>>said, I am a newbie.
>>
>>Please, could you Cc all answers to the adress :
>>
>>[email protected]
>>
>>My apologizes for my english ....
>>
>>
>>Claude
>>
>>System : Pentium 2,8C
>>Asus P4P800 DeLuxe
>>Intel I865PE
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>-
>>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>>the body of a message to [email protected]
>>More majordomo info at http://vger.kernel.org/majordomo-info.html
>>Please read the FAQ at http://www.tux.org/lkml/
>>
>>
>>
>>
>
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to [email protected]
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at http://www.tux.org/lkml/
>
>
>
Andreas Unterkircher a ?crit :
> Is it possible that your ide-cable can't handle the higher dma speeds
> and makes errors? is it udma compatible? have you looked for a
> firmware update for the burner @ http://www.plextor.com?
Firmware is up to date ....
I tried it with an other cable , UDMA 100 certified,
I tried all kind of things, putting the drive as master
but nothing has worked till yet.
Thanks for your answer
also zu Deutsch - sprech' ich viel besser als Englisch.
mfG
Claude
>
> andreas
>
>
> ----- Original Message -----
> From: "claude parisot" <[email protected]>
> To: <[email protected]>
> Cc: <[email protected]>
> Sent: Friday, January 16, 2004 8:24 PM
> Subject: DMA problem
>
>
>
>> Hello !
>>
>>Sorry to post a seconfd message on the list, I am only trying
>>to get an answern for this - it seems so - DMA-problem ??
>>
>>
>>I have some
>>problems with a brand new Plextor-drive, PX-W5224TA/T3B, I cannot
>>mount any CD or burn a CDR or CD-RW, except if I disable DMA with
>>following command :# hdparm -d0 /dev/hdd , a little bit annoying,
>>isn't it ?
>>
>>If I insert a cdrom in the drive the led doesn't go out, it flashes
>>as usual but it stays green.
>>
>>It seems to be a DMA-problem or a kernel-bug ???
>>Its only a supposition, I am a Linux-newbie, and I am looking
>>for an explanation and a solution ....
>>
>>By mounting a cdrom I get following error messages :
>>
>>Jan 11 20:46:00 ishwara kernel: scsi : aborting command due to timeout
>>: pid 102, scsi0, channel 0, id 1, lun 0 0x28 00 00 00 00 10 00 00 01 00
>>Jan 11 20:46:00 ishwara kernel: hdd: error waiting for DMA
>>Jan 11 20:46:00 ishwara kernel: hdd: dma timeout retry: status=0x7f {
>>DriveReady DeviceFault SeekComplete DataRequest CorrectedError Index
>>Error } Jan 11 20:46:00 ishwara kernel: hdd: dma timeout retry:
>>error=0x7f Jan 11 20:46:00 ishwara kernel: hdd: DMA disabled
>>Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
>>Jan 11 20:46:00 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
>>Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
>>Jan 11 20:46:00 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
>>Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
>>Jan 11 20:46:07 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
>>Jan 11 20:46:07 ishwara kernel: scsi0 channel 0 : resetting for second
>>half of retries. Jan 11 20:46:07 ishwara kernel: SCSI bus is being reset
>>for host 0 channel 0. Jan 11 20:46:07 ishwara kernel: hdd: status
>>timeout: status=0x80 { Busy } Jan 11 20:46:07 ishwara kernel: hdd: drive
>>not ready for command Jan 11 20:46:07 ishwara kernel: hdd: ATAPI reset
>>complete Jan 11 20:46:32 ishwara kernel: scsi : aborting command due to
>>timeout : pid 103, scsi0, channel 0, id 1, lun 0 0x28 00 00 00 00 10 00
>>rive not ready for command
>>
>>And then I have a freeze or at least a blocking of the sysem.
>>I have to reboot.
>>
>>Could someone give me an explanation of what is happening and a way to
>>solve the problem .... is this a kernel-bug ? Or an incompatibility
>>between the motherboard and the drive ??
>>
>>If you choose to help me, please don't be to esoteric, as I already
>>said, I am a newbie.
>>
>>Please, could you Cc all answers to the adress :
>>
>>[email protected]
>>
>>My apologizes for my english ....
>>
>>
>>Claude
>>
>>System : Pentium 2,8C
>>Asus P4P800 DeLuxe
>>Intel I865PE
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>-
>>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>>the body of a message to [email protected]
>>More majordomo info at http://vger.kernel.org/majordomo-info.html
>>Please read the FAQ at http://www.tux.org/lkml/
>>
>>
>
>
>
I don't know if this works, but I have found a new BIOS for that board:
http://www.asus.com.tw/support/download/item.aspx?ModelName=P4P800
In the notes are many "DMA"s inside.
On Friday 16 January 2004 20:42, claude parisot wrote:
> Andreas Unterkircher a ?crit :
> > Is it possible that your ide-cable can't handle the higher dma speeds
> > and makes errors? is it udma compatible? have you looked for a
> > firmware update for the burner @ http://www.plextor.com?
>
> Firmware is up to date ....
> I tried it with an other cable , UDMA 100 certified,
> I tried all kind of things, putting the drive as master
> but nothing has worked till yet.
>
>
> Thanks for your answer
>
> also zu Deutsch - sprech' ich viel besser als Englisch.
>
>
> mfG
>
> Claude
>
> > andreas
> >
> >
> > ----- Original Message -----
> > From: "claude parisot" <[email protected]>
> > To: <[email protected]>
> > Cc: <[email protected]>
> > Sent: Friday, January 16, 2004 8:24 PM
> > Subject: DMA problem
> >
> >> Hello !
> >>
> >>Sorry to post a seconfd message on the list, I am only trying
> >>to get an answern for this - it seems so - DMA-problem ??
> >>
> >>
> >>I have some
> >>problems with a brand new Plextor-drive, PX-W5224TA/T3B, I cannot
> >>mount any CD or burn a CDR or CD-RW, except if I disable DMA with
> >>following command :# hdparm -d0 /dev/hdd , a little bit annoying,
> >>isn't it ?
> >>
> >>If I insert a cdrom in the drive the led doesn't go out, it flashes
> >>as usual but it stays green.
> >>
> >>It seems to be a DMA-problem or a kernel-bug ???
> >>Its only a supposition, I am a Linux-newbie, and I am looking
> >>for an explanation and a solution ....
> >>
> >>By mounting a cdrom I get following error messages :
> >>
> >>Jan 11 20:46:00 ishwara kernel: scsi : aborting command due to timeout
> >>
> >>: pid 102, scsi0, channel 0, id 1, lun 0 0x28 00 00 00 00 10 00 00 01 00
> >>
> >>Jan 11 20:46:00 ishwara kernel: hdd: error waiting for DMA
> >>Jan 11 20:46:00 ishwara kernel: hdd: dma timeout retry: status=0x7f {
> >>DriveReady DeviceFault SeekComplete DataRequest CorrectedError Index
> >>Error } Jan 11 20:46:00 ishwara kernel: hdd: dma timeout retry:
> >>error=0x7f Jan 11 20:46:00 ishwara kernel: hdd: DMA disabled
> >>Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
> >>Jan 11 20:46:00 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
> >>Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
> >>Jan 11 20:46:00 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
> >>Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
> >>Jan 11 20:46:07 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
> >>Jan 11 20:46:07 ishwara kernel: scsi0 channel 0 : resetting for second
> >>half of retries. Jan 11 20:46:07 ishwara kernel: SCSI bus is being reset
> >>for host 0 channel 0. Jan 11 20:46:07 ishwara kernel: hdd: status
> >>timeout: status=0x80 { Busy } Jan 11 20:46:07 ishwara kernel: hdd: drive
> >>not ready for command Jan 11 20:46:07 ishwara kernel: hdd: ATAPI reset
> >>complete Jan 11 20:46:32 ishwara kernel: scsi : aborting command due to
> >>timeout : pid 103, scsi0, channel 0, id 1, lun 0 0x28 00 00 00 00 10 00
> >>rive not ready for command
> >>
> >>And then I have a freeze or at least a blocking of the sysem.
> >>I have to reboot.
> >>
> >>Could someone give me an explanation of what is happening and a way to
> >>solve the problem .... is this a kernel-bug ? Or an incompatibility
> >>between the motherboard and the drive ??
> >>
> >>If you choose to help me, please don't be to esoteric, as I already
> >>said, I am a newbie.
> >>
> >>Please, could you Cc all answers to the adress :
> >>
> >>[email protected]
> >>
> >>My apologizes for my english ....
> >>
> >>
> >>Claude
> >>
> >>System : Pentium 2,8C
> >>Asus P4P800 DeLuxe
> >>Intel I865PE
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>-
> >>To unsubscribe from this list: send the line "unsubscribe linux-kernel"
> >> in the body of a message to [email protected]
> >>More majordomo info at http://vger.kernel.org/majordomo-info.html
> >>Please read the FAQ at http://www.tux.org/lkml/
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
Wes Janzen a ?crit :
> If those options don't work, you might try dropping down the dma mode by
> one. I have a Maxtor drive that does something like that with my
> Promise PDC20269 when trying to use UDMA 2, but it works fine in UDMA 1.
>
> -Wes-
I tried it in the bios, all sorts of DMA , but nothing is working ....
>
> Andreas Unterkircher wrote:
>
>> Is it possible that your ide-cable can't handle the higher dma speeds
>> and makes errors? is it udma compatible? have you looked for a
>> firmware update for the burner @ http://www.plextor.com?
>>
>> andreas
>>
>>
>> ----- Original Message ----- From: "claude parisot"
>> <[email protected]>
>> To: <[email protected]>
>> Cc: <[email protected]>
>> Sent: Friday, January 16, 2004 8:24 PM
>> Subject: DMA problem
>>
>>
>>
>>
>>> Hello !
>>>
>>> Sorry to post a seconfd message on the list, I am only trying
>>> to get an answern for this - it seems so - DMA-problem ??
>>>
>>>
>>> I have some
>>> problems with a brand new Plextor-drive, PX-W5224TA/T3B, I cannot
>>> mount any CD or burn a CDR or CD-RW, except if I disable DMA with
>>> following command :# hdparm -d0 /dev/hdd , a little bit annoying,
>>> isn't it ?
>>>
>>> If I insert a cdrom in the drive the led doesn't go out, it flashes
>>> as usual but it stays green.
>>>
>>> It seems to be a DMA-problem or a kernel-bug ???
>>> Its only a supposition, I am a Linux-newbie, and I am looking
>>> for an explanation and a solution ....
>>>
>>> By mounting a cdrom I get following error messages :
>>>
>>> Jan 11 20:46:00 ishwara kernel: scsi : aborting command due to timeout
>>> : pid 102, scsi0, channel 0, id 1, lun 0 0x28 00 00 00 00 10 00 00 01 00
>>> Jan 11 20:46:00 ishwara kernel: hdd: error waiting for DMA
>>> Jan 11 20:46:00 ishwara kernel: hdd: dma timeout retry: status=0x7f {
>>> DriveReady DeviceFault SeekComplete DataRequest CorrectedError Index
>>> Error } Jan 11 20:46:00 ishwara kernel: hdd: dma timeout retry:
>>> error=0x7f Jan 11 20:46:00 ishwara kernel: hdd: DMA disabled
>>> Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
>>> Jan 11 20:46:00 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
>>> Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
>>> Jan 11 20:46:00 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
>>> Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
>>> Jan 11 20:46:07 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
>>> Jan 11 20:46:07 ishwara kernel: scsi0 channel 0 : resetting for second
>>> half of retries. Jan 11 20:46:07 ishwara kernel: SCSI bus is being reset
>>> for host 0 channel 0. Jan 11 20:46:07 ishwara kernel: hdd: status
>>> timeout: status=0x80 { Busy } Jan 11 20:46:07 ishwara kernel: hdd: drive
>>> not ready for command Jan 11 20:46:07 ishwara kernel: hdd: ATAPI reset
>>> complete Jan 11 20:46:32 ishwara kernel: scsi : aborting command due to
>>> timeout : pid 103, scsi0, channel 0, id 1, lun 0 0x28 00 00 00 00 10 00
>>> rive not ready for command
>>>
>>> And then I have a freeze or at least a blocking of the sysem.
>>> I have to reboot.
>>>
>>> Could someone give me an explanation of what is happening and a way to
>>> solve the problem .... is this a kernel-bug ? Or an incompatibility
>>> between the motherboard and the drive ??
>>>
>>> If you choose to help me, please don't be to esoteric, as I already
>>> said, I am a newbie.
>>>
>>> Please, could you Cc all answers to the adress :
>>>
>>> [email protected]
>>>
>>> My apologizes for my english ....
>>>
>>>
>>> Claude
>>>
>>> System : Pentium 2,8C
>>> Asus P4P800 DeLuxe
>>> Intel I865PE
>>>
>>>
DOSProfi a ?crit :
> I don't know if this works, but I have found a new BIOS for that board:
>
> http://www.asus.com.tw/support/download/item.aspx?ModelName=P4P800
>
> In the notes are many "DMA"s inside.
>
No, doesn't work, I already have this latest version.
Thanks
>
>
> On Friday 16 January 2004 20:42, claude parisot wrote:
>
>>Andreas Unterkircher a ?crit :
>>
>>>Is it possible that your ide-cable can't handle the higher dma speeds
>>>and makes errors? is it udma compatible? have you looked for a
>>>firmware update for the burner @ http://www.plextor.com?
>>
>>Firmware is up to date ....
>>I tried it with an other cable , UDMA 100 certified,
>>I tried all kind of things, putting the drive as master
>>but nothing has worked till yet.
>>
>>
>>Thanks for your answer
>>
>> also zu Deutsch - sprech' ich viel besser als Englisch.
>>
>>
>>mfG
>>
>>Claude
>>
>>
>>>andreas
>>>
>>>
>>>----- Original Message -----
>>>From: "claude parisot" <[email protected]>
>>>To: <[email protected]>
>>>Cc: <[email protected]>
>>>Sent: Friday, January 16, 2004 8:24 PM
>>>Subject: DMA problem
>>>
>>>
>>>> Hello !
>>>>
>>>>Sorry to post a seconfd message on the list, I am only trying
>>>>to get an answern for this - it seems so - DMA-problem ??
>>>>
>>>>
>>>>I have some
>>>>problems with a brand new Plextor-drive, PX-W5224TA/T3B, I cannot
>>>>mount any CD or burn a CDR or CD-RW, except if I disable DMA with
>>>>following command :# hdparm -d0 /dev/hdd , a little bit annoying,
>>>>isn't it ?
>>>>
>>>>If I insert a cdrom in the drive the led doesn't go out, it flashes
>>>>as usual but it stays green.
>>>>
>>>>It seems to be a DMA-problem or a kernel-bug ???
>>>>Its only a supposition, I am a Linux-newbie, and I am looking
>>>>for an explanation and a solution ....
>>>>
>>>>By mounting a cdrom I get following error messages :
>>>>
>>>>Jan 11 20:46:00 ishwara kernel: scsi : aborting command due to timeout
>>>>
>>>>: pid 102, scsi0, channel 0, id 1, lun 0 0x28 00 00 00 00 10 00 00 01 00
>>>>
>>>>Jan 11 20:46:00 ishwara kernel: hdd: error waiting for DMA
>>>>Jan 11 20:46:00 ishwara kernel: hdd: dma timeout retry: status=0x7f {
>>>>DriveReady DeviceFault SeekComplete DataRequest CorrectedError Index
>>>>Error } Jan 11 20:46:00 ishwara kernel: hdd: dma timeout retry:
>>>>error=0x7f Jan 11 20:46:00 ishwara kernel: hdd: DMA disabled
>>>>Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
>>>>Jan 11 20:46:00 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
>>>>Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
>>>>Jan 11 20:46:00 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
>>>>Jan 11 20:46:00 ishwara kernel: hdd: ATAPI reset complete
>>>>Jan 11 20:46:07 ishwara kernel: hdd: irq timeout: status=0x80 { Busy }
>>>>Jan 11 20:46:07 ishwara kernel: scsi0 channel 0 : resetting for second
>>>>half of retries. Jan 11 20:46:07 ishwara kernel: SCSI bus is being reset
>>>>for host 0 channel 0. Jan 11 20:46:07 ishwara kernel: hdd: status
>>>>timeout: status=0x80 { Busy } Jan 11 20:46:07 ishwara kernel: hdd: drive
>>>>not ready for command Jan 11 20:46:07 ishwara kernel: hdd: ATAPI reset
>>>>complete Jan 11 20:46:32 ishwara kernel: scsi : aborting command due to
>>>>timeout : pid 103, scsi0, channel 0, id 1, lun 0 0x28 00 00 00 00 10 00
>>>>rive not ready for command
>>>>
>>>>And then I have a freeze or at least a blocking of the sysem.
>>>>I have to reboot.
>>>>
>>>>Could someone give me an explanation of what is happening and a way to
>>>>solve the problem .... is this a kernel-bug ? Or an incompatibility
>>>>between the motherboard and the drive ??
>>>>
>>>>If you choose to help me, please don't be to esoteric, as I already
>>>>said, I am a newbie.
>>>>
>>>>Please, could you Cc all answers to the adress :
>>>>
>>>>[email protected]
>>>>
>>>>My apologizes for my english ....
>>>>
>>>>
>>>>Claude
>>>>
>>>>System : Pentium 2,8C
>>>>Asus P4P800 DeLuxe
>>>>Intel I865PE
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>-
>>>>To unsubscribe from this list: send the line "unsubscribe linux-kernel"
>>>>in the body of a message to [email protected]
>>>>More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>Please read the FAQ at http://www.tux.org/lkml/
>>
>>-
>>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>>the body of a message to [email protected]
>>More majordomo info at http://vger.kernel.org/majordomo-info.html
>>Please read the FAQ at http://www.tux.org/lkml/
>
>
>