(forgot lspci, resend)
The patch disables sound for me. The programs play sound normally,
without any errors, there is just nothing out of the boxes.
Everything, I could think of, is unmuted.
Reverting the patch brings sound back.
I applied _not_ all of the -mm patches, so probably there is something
very important but not containing alsa anywhere in patch name.
It is an SMP (ht) machine.
Drivers:
snd_intel8x0 29476 0
snd_ac97_codec 51204 1 snd_intel8x0
snd_pcm 88608 2 snd_pcm_oss,snd_intel8x0
snd_timer 22916 1 snd_pcm
snd_page_alloc 9220 2 snd_intel8x0,snd_pcm
snd_mpu401_uart 6656 1 snd_intel8x0
snd_rawmidi 21024 1 snd_mpu401_uart
snd_seq_device 7048 1 snd_rawmidi
snd 45028 9 snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 7776 1 snd
gcc (GCC) 3.3.2 20031022 (Gentoo Linux 3.3.2-r2, propolice)
alsa-lib is 1.0.1.
Applied patches (in order):
pci-probing-typo.patch
acpi.patch
acpi-20031203-fix.patch
acpi-frees-irq0.patch
sched-find_busiest_node-resolution-fix.patch
sched-domains.patch
sched-clock-fixes.patch
sched-build-fix.patch
sched-sibling-map-to-cpumask.patch
p4-clockmod-sibling-map-fix.patch
p4-clockmod-more-than-two-siblings.patch
sched-domains-i386-ht.patch
sched-domain-tweak.patch
sched-no-drop-balance.patch
sched-arch_init_sched_domains-fix.patch
sched-find_busiest_group-clarification.patch
sched-remove-noisy-printks.patch
show_task-free-stack-fix.patch
oops-dump-preceding-code.patch
alsa-101.patch
Alsa was applied last, and kernel was tested to work (with sound)
before applying alsa-101.
The only message in log: "kernel: intel8x0: clocking to 48000"
(in both kernels, working and not).
strace didn't any errors on the silent kernel.
The car is an onboard audio controller of Gigabyte GA9IPE1000 Pro:
00:1f.5 Multimedia audio controller: Intel Corp. 82801EB AC'97 Audio Controller (rev 02)
Subsystem: Giga-byte Technology: Unknown device a002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at d800 [size=256]
Region 1: I/O ports at dc00 [size=64]
Region 2: Memory at f2201000 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at f2202000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-