Formatting of Kconfig files doesn't look so pretty, so let the
Great White Handkerchief come around and clean it up.
Signed-off-by: Enrico Weigelt, metux IT consult <[email protected]>
---
arch/mips/Kconfig | 61 ++++++++++++++++++++--------------------
arch/mips/bcm47xx/Kconfig | 8 +++---
arch/mips/bcm63xx/boards/Kconfig | 2 +-
arch/mips/pic32/Kconfig | 8 +++---
4 files changed, 39 insertions(+), 40 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 4a5f5b0..de67165 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -276,7 +276,7 @@ config BCM47XX
select BCM47XX_SPROM
select BCM47XX_SSB if !BCM47XX_BCMA
help
- Support for BCM47XX based boards
+ Support for BCM47XX based boards
config BCM63XX
bool "Broadcom BCM63XX based boards"
@@ -295,7 +295,7 @@ config BCM63XX
select MIPS_L1_CACHE_SHIFT_4
select CLKDEV_LOOKUP
help
- Support for BCM63XX based boards
+ Support for BCM63XX based boards
config MIPS_COBALT
bool "Cobalt Server"
@@ -374,10 +374,10 @@ config MACH_JAZZ
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_100HZ
help
- This a family of machines based on the MIPS R4030 chipset which was
- used by several vendors to build RISC/os and Windows NT workstations.
- Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and
- Olivetti M700-10 workstations.
+ This a family of machines based on the MIPS R4030 chipset which was
+ used by several vendors to build RISC/os and Windows NT workstations.
+ Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and
+ Olivetti M700-10 workstations.
config MACH_INGENIC
bool "Ingenic SoC based machines"
@@ -573,14 +573,14 @@ config NXP_STB220
bool "NXP STB220 board"
select SOC_PNX833X
help
- Support for NXP Semiconductors STB220 Development Board.
+ Support for NXP Semiconductors STB220 Development Board.
config NXP_STB225
bool "NXP 225 board"
select SOC_PNX833X
select SOC_PNX8335
help
- Support for NXP Semiconductors STB225 Development Board.
+ Support for NXP Semiconductors STB225 Development Board.
config PMC_MSP
bool "PMC-Sierra MSP chipsets"
@@ -722,9 +722,9 @@ config SGI_IP28
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select MIPS_L1_CACHE_SHIFT_7
- help
- This is the SGI Indigo2 with R10000 processor. To compile a Linux
- kernel that runs on these, say Y here.
+ help
+ This is the SGI Indigo2 with R10000 processor. To compile a Linux
+ kernel that runs on these, say Y here.
config SGI_IP32
bool "SGI IP32 (O2)"
@@ -1175,9 +1175,9 @@ config HOLES_IN_ZONE
config SYS_SUPPORTS_RELOCATABLE
bool
help
- Selected if the platform supports relocating the kernel.
- The platform must provide plat_get_fdt() if it selects CONFIG_USE_OF
- to allow access to command line and entropy sources.
+ Selected if the platform supports relocating the kernel.
+ The platform must provide plat_get_fdt() if it selects CONFIG_USE_OF
+ to allow access to command line and entropy sources.
config MIPS_CBPF_JIT
def_bool y
@@ -2120,8 +2120,8 @@ config MIPS_PGD_C0_CONTEXT
# Set to y for ptrace access to watch registers.
#
config HARDWARE_WATCHPOINTS
- bool
- default y if CPU_MIPSR1 || CPU_MIPSR2 || CPU_MIPSR6
+ bool
+ default y if CPU_MIPSR1 || CPU_MIPSR2 || CPU_MIPSR6
menu "Kernel type"
@@ -2185,10 +2185,10 @@ config PAGE_SIZE_4KB
bool "4kB"
depends on !CPU_LOONGSON2 && !CPU_LOONGSON3
help
- This option select the standard 4kB Linux page size. On some
- R3000-family processors this is the only available page size. Using
- 4kB page size will minimize memory consumption and is therefore
- recommended for low memory systems.
+ This option select the standard 4kB Linux page size. On some
+ R3000-family processors this is the only available page size. Using
+ 4kB page size will minimize memory consumption and is therefore
+ recommended for low memory systems.
config PAGE_SIZE_8KB
bool "8kB"
@@ -2481,7 +2481,6 @@ config SB1_PASS_2_1_WORKAROUNDS
depends on CPU_SB1 && CPU_SB1_PASS_2
default y
-
choice
prompt "SmartMIPS or microMIPS ASE support"
@@ -2689,16 +2688,16 @@ config RANDOMIZE_BASE
bool "Randomize the address of the kernel image"
depends on RELOCATABLE
---help---
- Randomizes the physical and virtual address at which the
- kernel image is loaded, as a security feature that
- deters exploit attempts relying on knowledge of the location
- of kernel internals.
+ Randomizes the physical and virtual address at which the
+ kernel image is loaded, as a security feature that
+ deters exploit attempts relying on knowledge of the location
+ of kernel internals.
- Entropy is generated using any coprocessor 0 registers available.
+ Entropy is generated using any coprocessor 0 registers available.
- The kernel will be offset by up to RANDOMIZE_BASE_MAX_OFFSET.
+ The kernel will be offset by up to RANDOMIZE_BASE_MAX_OFFSET.
- If unsure, say N.
+ If unsure, say N.
config RANDOMIZE_BASE_MAX_OFFSET
hex "Maximum kASLR offset" if EXPERT
@@ -2828,7 +2827,7 @@ choice
prompt "Timer frequency"
default HZ_250
help
- Allows the configuration of the timer frequency.
+ Allows the configuration of the timer frequency.
config HZ_24
bool "24 HZ" if SYS_SUPPORTS_24HZ || SYS_SUPPORTS_ARBIT_HZ
@@ -3128,10 +3127,10 @@ config ARCH_MMAP_RND_BITS_MAX
default 15
config ARCH_MMAP_RND_COMPAT_BITS_MIN
- default 8
+ default 8
config ARCH_MMAP_RND_COMPAT_BITS_MAX
- default 15
+ default 15
config I8253
bool
diff --git a/arch/mips/bcm47xx/Kconfig b/arch/mips/bcm47xx/Kconfig
index 2947103..6889f74 100644
--- a/arch/mips/bcm47xx/Kconfig
+++ b/arch/mips/bcm47xx/Kconfig
@@ -15,9 +15,9 @@ config BCM47XX_SSB
select SSB_DRIVER_GPIO
default y
help
- Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
+ Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
- This will generate an image with support for SSB and MIPS32 R1 instruction set.
+ This will generate an image with support for SSB and MIPS32 R1 instruction set.
config BCM47XX_BCMA
bool "BCMA Support for Broadcom BCM47XX"
@@ -31,8 +31,8 @@ config BCM47XX_BCMA
select BCMA_DRIVER_GPIO
default y
help
- Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.
+ Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.
- This will generate an image with support for BCMA and MIPS32 R2 instruction set.
+ This will generate an image with support for BCMA and MIPS32 R2 instruction set.
endif
diff --git a/arch/mips/bcm63xx/boards/Kconfig b/arch/mips/bcm63xx/boards/Kconfig
index f60d966..492c3bd 100644
--- a/arch/mips/bcm63xx/boards/Kconfig
+++ b/arch/mips/bcm63xx/boards/Kconfig
@@ -5,7 +5,7 @@ choice
default BOARD_BCM963XX
config BOARD_BCM963XX
- bool "Generic Broadcom 963xx boards"
+ bool "Generic Broadcom 963xx boards"
select SSB
endchoice
diff --git a/arch/mips/pic32/Kconfig b/arch/mips/pic32/Kconfig
index e284e89..7acbb50 100644
--- a/arch/mips/pic32/Kconfig
+++ b/arch/mips/pic32/Kconfig
@@ -39,12 +39,12 @@ choice
Select the devicetree.
config DTB_PIC32_NONE
- bool "None"
+ bool "None"
config DTB_PIC32_MZDA_SK
- bool "PIC32MZDA Starter Kit"
- depends on PIC32MZDA
- select BUILTIN_DTB
+ bool "PIC32MZDA Starter Kit"
+ depends on PIC32MZDA
+ select BUILTIN_DTB
endchoice
--
1.9.1
Hello,
Enrico Weigelt, metux IT consult wrote:
> Formatting of Kconfig files doesn't look so pretty, so let the
> Great White Handkerchief come around and clean it up.
>
> Signed-off-by: Enrico Weigelt, metux IT consult <[email protected]>
Applied to mips-next.
Thanks,
Paul
[ This message was auto-generated; if you believe anything is incorrect
then please email [email protected] to report it. ]