smartd runs on my laptop, using openlog() ; vsyslog(); closelog(); to
write to SYSLOG. It's been running for a few days. This is stock RH9
Linux lap 2.4.20-30.9 #1 Wed Feb 4 20:44:26 EST 2004 i686 i686 i386
GNU/Linux
I arrived in Berlin yesterday from the USA (dt is seven hours) and copied
/usr/share/zoneinfo/Europe/Berlin into /etc/localtime so that my desktop
would display the right local time. System clock is UTC.
I just noticed that smartd is logging the WRONG time into SYSLOG. Here
are the entries, in order, with some comments from me inserted after "***"
Mar 21 04:02:17 localhost syslogd 1.4.1: restart.
Mar 21 11:11:24 localhost su(pam_unix)[21417]: session opened for user
news by (uid=0)
Mar 21 11:11:24 localhost su(pam_unix)[21417]: session closed for user
news
Mar 21 12:10:30 localhost ntpd[3060]: synchronisation lost
*** I run ntpd.
Mar 21 12:11:38 localhost ntpd[3060]: time reset 2.738912 s
Mar 21 12:11:38 localhost ntpd[3060]: synchronisation lost
Mar 21 14:22:45 localhost ntpd[3060]: synchronisation lost
Mar 21 14:29:22 localhost ntpd[3060]: time reset 2.272984 s
Mar 21 14:29:22 localhost ntpd[3060]: synchronisation lost
Mar 21 15:45:01 localhost ntpd[3060]: synchronisation lost
Mar 21 16:00:53 localhost ntpd[3060]: time reset 4.989967 s
Mar 21 16:00:53 localhost ntpd[3060]: synchronisation lost
Mar 21 12:28:31 localhost smartd[2072]: Device: /dev/hda, starting
scheduled Short Self-Test.
*** And there's the problem. openlog/vslog/closelog have the wrong time!
*** I noticed this because I heard the disk starting a scheduled self-test
*** at the wrong time, which means that time(2) is returning the wrong
*** value within the smartd process (not just for syslog).
Mar 21 19:29:03 localhost su(pam_unix)[13096]: session opened
for user root by ballen(uid=500)
Mar 21 13:41:16 localhost smartd[2072]: Signal USR1 - checking devices now
rather than in 1035 seconds.
*** This time difference is exactly the difference between US Central time
*** and Berlin time: 7 hours.
Mar 21 20:42:28 localhost logger: here is the output of date Sun Mar 21
20:42:27 CET 2004
*** I echoed the output of `date` into "logger" above
Mar 21 20:42:40 localhost logger: here is the output of ntptime
ntp_gettime() returns code 0 (OK) time c4086eb0.6ad0b000 Sun, Mar 21 2004
20:42:40.417, (.417247), maximum error 312657 us, estimated error 6382 us
ntp_adjtime() returns code 0 (OK) modes 0x0 (), offset -17322.000
us, frequency 82.893 ppm, interval 4 s, maximum error 312657 us, estimated
error 6382 us, status 0x1 (PLL), time constant 6, precision 1.000 us,
tolerance 512 ppm, pps frequency 0.000 ppm, stability 512.000 ppm, jitter
200.000 us, intervals 0, jitter exceeded 0, stability exceeded 0, errors
0.
*** I echoed the output of `ntptime` into "logger" above
Mar 21 13:42:44 localhost smartd[2072]: Signal USR1 - checking devices now
rather than in 947 seconds.
*** and finally, I sent SIGUSR1 to smartd. It's still logging US Central
*** time!
Is this glibc problem, an ntpd problem, a kernel problem, or is there
something wrong with my smartd code? The following bit of code is
equivalent to what's in smartd:
int main() {
time_t now=time(NULL);
openlog("smartd", LOG_PID, LOG_DAEMON);
syslog(LOG_INFO, "local time is %s\n", ctime(&now));
closelog();
return 0;
}
and it makes this (correct!) entry:
Mar 21 21:13:25 localhost experiment[13705]: local time is Sun Mar 21
21:13:25 2004
This is making the jet lag even worse (;-)!
Cheers,
Bruce
OK, replying to my own email. This is a glibc bug in localtime(); see
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=48184 for a report.
Bugzilla for glibc seems to be broken, so I can't see if a bug report for
glibc has been filed or not. As more people travel between timezones with
laptops, this annoying problem will crop up more and more often.
Cheers,
Bruce
On Sun, 21 Mar 2004, Bruce Allen wrote:
> smartd runs on my laptop, using openlog() ; vsyslog(); closelog(); to
> write to SYSLOG. It's been running for a few days. This is stock RH9
> Linux lap 2.4.20-30.9 #1 Wed Feb 4 20:44:26 EST 2004 i686 i686 i386
> GNU/Linux
>
> I arrived in Berlin yesterday from the USA (dt is seven hours) and copied
> /usr/share/zoneinfo/Europe/Berlin into /etc/localtime so that my desktop
> would display the right local time. System clock is UTC.
>
> I just noticed that smartd is logging the WRONG time into SYSLOG. Here
> are the entries, in order, with some comments from me inserted after "***"
>
> Mar 21 04:02:17 localhost syslogd 1.4.1: restart.
> Mar 21 11:11:24 localhost su(pam_unix)[21417]: session opened for user
> news by (uid=0)
> Mar 21 11:11:24 localhost su(pam_unix)[21417]: session closed for user
> news
> Mar 21 12:10:30 localhost ntpd[3060]: synchronisation lost
>
> *** I run ntpd.
>
> Mar 21 12:11:38 localhost ntpd[3060]: time reset 2.738912 s
> Mar 21 12:11:38 localhost ntpd[3060]: synchronisation lost
> Mar 21 14:22:45 localhost ntpd[3060]: synchronisation lost
> Mar 21 14:29:22 localhost ntpd[3060]: time reset 2.272984 s
> Mar 21 14:29:22 localhost ntpd[3060]: synchronisation lost
> Mar 21 15:45:01 localhost ntpd[3060]: synchronisation lost
> Mar 21 16:00:53 localhost ntpd[3060]: time reset 4.989967 s
> Mar 21 16:00:53 localhost ntpd[3060]: synchronisation lost
> Mar 21 12:28:31 localhost smartd[2072]: Device: /dev/hda, starting
> scheduled Short Self-Test.
>
> *** And there's the problem. openlog/vslog/closelog have the wrong time!
> *** I noticed this because I heard the disk starting a scheduled self-test
> *** at the wrong time, which means that time(2) is returning the wrong
> *** value within the smartd process (not just for syslog).
>
> Mar 21 19:29:03 localhost su(pam_unix)[13096]: session opened
> for user root by ballen(uid=500)
> Mar 21 13:41:16 localhost smartd[2072]: Signal USR1 - checking devices now
> rather than in 1035 seconds.
>
> *** This time difference is exactly the difference between US Central time
> *** and Berlin time: 7 hours.
>
> Mar 21 20:42:28 localhost logger: here is the output of date Sun Mar 21
> 20:42:27 CET 2004
>
> *** I echoed the output of `date` into "logger" above
>
> Mar 21 20:42:40 localhost logger: here is the output of ntptime
> ntp_gettime() returns code 0 (OK) time c4086eb0.6ad0b000 Sun, Mar 21 2004
> 20:42:40.417, (.417247), maximum error 312657 us, estimated error 6382 us
> ntp_adjtime() returns code 0 (OK) modes 0x0 (), offset -17322.000
> us, frequency 82.893 ppm, interval 4 s, maximum error 312657 us, estimated
> error 6382 us, status 0x1 (PLL), time constant 6, precision 1.000 us,
> tolerance 512 ppm, pps frequency 0.000 ppm, stability 512.000 ppm, jitter
> 200.000 us, intervals 0, jitter exceeded 0, stability exceeded 0, errors
> 0.
>
> *** I echoed the output of `ntptime` into "logger" above
>
> Mar 21 13:42:44 localhost smartd[2072]: Signal USR1 - checking devices now
> rather than in 947 seconds.
>
> *** and finally, I sent SIGUSR1 to smartd. It's still logging US Central
> *** time!
>
> Is this glibc problem, an ntpd problem, a kernel problem, or is there
> something wrong with my smartd code? The following bit of code is
> equivalent to what's in smartd:
>
> int main() {
> time_t now=time(NULL);
> openlog("smartd", LOG_PID, LOG_DAEMON);
> syslog(LOG_INFO, "local time is %s\n", ctime(&now));
> closelog();
> return 0;
> }
>
> and it makes this (correct!) entry:
>
> Mar 21 21:13:25 localhost experiment[13705]: local time is Sun Mar 21
> 21:13:25 2004
>
> This is making the jet lag even worse (;-)!
>
> Cheers,
> Bruce
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
>