Kernel janitor changes:
* use kernel provided min/max
Signed-off-by: Maximilian Attems <[email protected]>
Signed-off-by: Paul Fulghum <[email protected]>
* use kernel provided msecs_to_jiffies
Signed-off-by: Nishanth Aravamudan <[email protected]>
Signed-off-by: Maximilian Attems <[email protected]>
Signed-off-by: Paul Fulghum <[email protected]>
Please apply.
--
Paul Fulghum
[email protected]
--- linux-2.6.9/drivers/char/synclink.c 2004-09-02 11:23:59.000000000 -0500
+++ linux-2.6.9-mg/drivers/char/synclink.c 2004-09-03 12:49:12.952860120 -0500
@@ -1,7 +1,7 @@
/*
* linux/drivers/char/synclink.c
*
- * $Id: synclink.c,v 4.28 2004/08/11 19:30:01 paulkf Exp $
+ * $Id: synclink.c,v 4.30 2004/09/03 15:46:40 paulkf Exp $
*
* Device driver for Microgate SyncLink ISA and PCI
* high speed multiprotocol serial adapters.
@@ -851,8 +851,6 @@
static int mgsl_wait_event(struct mgsl_struct * info, int __user *mask);
static int mgsl_loopmode_send_done( struct mgsl_struct * info );
-#define jiffies_from_ms(a) ((((a) * HZ)/1000)+1)
-
/* set non-zero on successful registration with PCI subsystem */
static int pci_registered;
@@ -899,7 +897,7 @@
MODULE_PARM(txholdbufs,"1-" __MODULE_STRING(MAX_TOTAL_DEVICES) "i");
static char *driver_name = "SyncLink serial driver";
-static char *driver_version = "$Revision: 4.28 $";
+static char *driver_version = "$Revision: 4.30 $";
static int synclink_init_one (struct pci_dev *dev,
const struct pci_device_id *ent);
@@ -930,10 +928,6 @@
static void mgsl_change_params(struct mgsl_struct *info);
static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout);
-#ifndef MIN
-#define MIN(a,b) ((a) < (b) ? (a) : (b))
-#endif
-
/*
* 1st function defined in .text section. Calling this function in
* init_module() followed by a breakpoint allows a remote debugger
@@ -2246,8 +2240,8 @@
if (from_user) {
down(&tmp_buf_sem);
while (1) {
- c = MIN(count,
- MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
+ c = min_t(int, count,
+ min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
SERIAL_XMIT_SIZE - info->xmit_head));
if (c <= 0)
break;
@@ -2260,7 +2254,7 @@
break;
}
spin_lock_irqsave(&info->irq_spinlock,flags);
- c = MIN(c, MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
+ c = min_t(int, c, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
SERIAL_XMIT_SIZE - info->xmit_head));
memcpy(info->xmit_buf + info->xmit_head, tmp_buf, c);
info->xmit_head = ((info->xmit_head + c) &
@@ -2275,8 +2269,8 @@
} else {
while (1) {
spin_lock_irqsave(&info->irq_spinlock,flags);
- c = MIN(count,
- MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
+ c = min_t(int, count,
+ min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
SERIAL_XMIT_SIZE - info->xmit_head));
if (c <= 0) {
spin_unlock_irqrestore(&info->irq_spinlock,flags);
@@ -3314,7 +3308,7 @@
char_time = 1;
if (timeout)
- char_time = MIN(char_time, timeout);
+ char_time = min_t(unsigned long, char_time, timeout);
if ( info->params.mode == MGSL_MODE_HDLC ||
info->params.mode == MGSL_MODE_RAW ) {
@@ -4175,7 +4169,7 @@
info->get_tx_holding_index=0;
/* restart transmit timer */
- mod_timer(&info->tx_timer, jiffies + jiffies_from_ms(5000));
+ mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(5000));
ret = 1;
}
@@ -5804,7 +5798,7 @@
usc_TCmd( info, TCmd_SendFrame );
- info->tx_timer.expires = jiffies + jiffies_from_ms(5000);
+ info->tx_timer.expires = jiffies + msecs_to_jiffies(5000);
add_timer(&info->tx_timer);
}
info->tx_active = 1;
@@ -6767,7 +6761,7 @@
if ( debug_level >= DEBUG_LEVEL_DATA )
mgsl_trace_block(info,info->rx_buffer_list[StartIndex].virt_addr,
- MIN(framesize,DMABUFFERSIZE),0);
+ min_t(int, framesize, DMABUFFERSIZE),0);
if (framesize) {
if ( ( (info->params.crc_type & HDLC_CRC_RETURN_EX) &&
@@ -6982,7 +6976,7 @@
if ( debug_level >= DEBUG_LEVEL_DATA )
mgsl_trace_block(info,info->rx_buffer_list[CurrentIndex].virt_addr,
- MIN(framesize,DMABUFFERSIZE),0);
+ min_t(int, framesize, DMABUFFERSIZE),0);
if (framesize) {
/* copy dma buffer(s) to contiguous intermediate buffer */
@@ -7042,7 +7036,7 @@
DMABUFFERENTRY *pBufEntry;
if ( debug_level >= DEBUG_LEVEL_DATA )
- mgsl_trace_block(info,Buffer, MIN(BufferSize,DMABUFFERSIZE), 1);
+ mgsl_trace_block(info,Buffer, min_t(int, BufferSize, DMABUFFERSIZE), 1);
if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) {
/* set CMR:13 to start transmit when
@@ -7200,7 +7194,7 @@
EndTime=100;
while( EndTime-- && !info->irq_occurred ) {
set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(jiffies_from_ms(10));
+ schedule_timeout(msecs_to_jiffies(10));
}
spin_lock_irqsave(&info->irq_spinlock,flags);
@@ -7339,7 +7333,7 @@
/*************************************************************/
/* Wait 100ms for interrupt. */
- EndTime = jiffies + jiffies_from_ms(100);
+ EndTime = jiffies + msecs_to_jiffies(100);
for(;;) {
if (time_after(jiffies, EndTime)) {
@@ -7395,7 +7389,7 @@
/**********************************/
/* Wait 100ms */
- EndTime = jiffies + jiffies_from_ms(100);
+ EndTime = jiffies + msecs_to_jiffies(100);
for(;;) {
if (time_after(jiffies, EndTime)) {
@@ -7437,7 +7431,7 @@
/******************************/
/* Wait 100ms */
- EndTime = jiffies + jiffies_from_ms(100);
+ EndTime = jiffies + msecs_to_jiffies(100);
/* While timer not expired wait for transmit complete */
@@ -7468,7 +7462,7 @@
/* WAIT FOR RECEIVE COMPLETE */
/* Wait 100ms */
- EndTime = jiffies + jiffies_from_ms(100);
+ EndTime = jiffies + msecs_to_jiffies(100);
/* Wait for 16C32 to write receive status to buffer entry. */
status=info->rx_buffer_list[0].status;