Hi,
This is a update for the msp3400 module. Changes:
* switch over to 2.6-ish insmod options.
* use kthread for thread management.
* add support for v4l2 audio ioctls.
* merge a number of changes from the ivtv project.
* add suspend/resume functions.
The patch also removes all trailing whitespaces. I've a script
to remove them from my sources now, that should kill those no-op
whitespace changes in my patches after merging this initial cleanup.
Gerd
Signed-off-by: Gerd Knorr <[email protected]>
---
drivers/media/video/msp3400.c | 1040 +++++++++++++++++++++-------------
drivers/media/video/msp3400.h | 22
2 files changed, 690 insertions(+), 372 deletions(-)
diff -u linux-2.6.9/drivers/media/video/msp3400.c linux/drivers/media/video/msp3400.c
--- linux-2.6.9/drivers/media/video/msp3400.c 2004-10-21 11:44:41.000000000 +0200
+++ linux/drivers/media/video/msp3400.c 2004-10-21 14:57:52.547496066 +0200
@@ -47,6 +47,8 @@
#include <linux/videodev.h>
#include <linux/init.h>
#include <linux/smp_lock.h>
+#include <linux/kthread.h>
+#include <linux/suspend.h>
#include <asm/semaphore.h>
#include <asm/pgtable.h>
@@ -54,54 +56,53 @@
#include <media/id.h>
#include "msp3400.h"
+#define OPMODE_AUTO -1
+#define OPMODE_MANUAL 0
+#define OPMODE_SIMPLE 1 /* use short programming (>= msp3410 only) */
+#define OPMODE_SIMPLER 2 /* use shorter programming (>= msp34xxG) */
+
/* insmod parameters */
+static int opmode = OPMODE_AUTO;
static int debug = 0; /* debug output */
static int once = 0; /* no continous stereo monitoring */
static int amsound = 0; /* hard-wire AM sound at 6.5 Hz (france),
- the autoscan seems work well only with FM... */
-static int simple = -1; /* use short programming (>= msp3410 only) */
+ the autoscan seems work well only with FM... */
+static int standard = 1; /* Override auto detect of audio standard, if needed. */
static int dolby = 0;
-#define DFP_COUNT 0x41
-static const int bl_dfp[] = {
- 0x00, 0x01, 0x02, 0x03, 0x06, 0x08, 0x09, 0x0a,
- 0x0b, 0x0d, 0x0e, 0x10
-};
+static int stereo_threshold = 0x190; /* a2 threshold for stereo/bilingual
+ (msp34xxg only) 0x00a0-0x03c0 */
struct msp3400c {
int rev1,rev2;
-
- int simple;
+
+ int opmode;
int mode;
int norm;
- int stereo;
int nicam_on;
int acb;
int main, second; /* sound carrier */
int input;
+ int source; /* see msp34xxg_set_source */
+
+ /* v4l2 */
+ int audmode;
+ int rxsubchans;
int muted;
int volume, balance;
int bass, treble;
- /* shadow register set */
- int dfp_regs[DFP_COUNT];
-
/* thread */
- pid_t tpid;
- struct completion texit;
+ struct task_struct *kthread;
wait_queue_head_t wq;
-
- int active:1;
int restart:1;
- int rmmod:1;
-
- int watch_stereo;
- struct timer_list wake_stereo;
+ int watch_stereo:1;
};
#define HAVE_NICAM(msp) (((msp->rev2>>8) & 0xff) != 00)
#define HAVE_SIMPLE(msp) ((msp->rev1 & 0xff) >= 'D'-'@')
+#define HAVE_SIMPLER(msp) ((msp->rev1 & 0xff) >= 'G'-'@')
#define HAVE_RADIO(msp) ((msp->rev1 & 0xff) >= 'G'-'@')
#define VIDEO_MODE_RADIO 16 /* norm magic for radio mode */
@@ -111,11 +112,21 @@
#define dprintk if (debug >= 1) printk
#define d2printk if (debug >= 2) printk
-MODULE_PARM(once,"i");
-MODULE_PARM(debug,"i");
-MODULE_PARM(simple,"i");
-MODULE_PARM(amsound,"i");
-MODULE_PARM(dolby,"i");
+/* read-only */
+module_param(opmode, int, 0444);
+
+/* read-write */
+module_param(once, int, 0644);
+module_param(debug, int, 0644);
+module_param(stereo_threshold, int, 0644);
+module_param(standard, int, 0644);
+module_param(amsound, int, 0644);
+module_param(dolby, int, 0644);
+
+MODULE_PARM_DESC(once, "No continuous stereo monitoring");
+MODULE_PARM_DESC(debug, "Enable debug messages");
+MODULE_PARM_DESC(standard, "Specify audio standard: 32 = NTSC, 64 = radio, Default: Autodetect");
+MODULE_PARM_DESC(amsound, "Hardwire AM sound at 6.5Hz (France), FM can autoscan");
MODULE_DESCRIPTION("device driver for msp34xx TV sound processor");
MODULE_AUTHOR("Gerd Knorr");
@@ -141,10 +152,6 @@
/* ----------------------------------------------------------------------- */
/* functions for talking to the MSP3400C Sound processor */
-#ifndef I2C_M_IGNORE_NAK
-# define I2C_M_IGNORE_NAK 0x1000
-#endif
-
static int msp3400c_reset(struct i2c_client *client)
{
/* reset and read revision code */
@@ -160,14 +167,14 @@
{ client->addr, 0, 3, write },
{ client->addr, I2C_M_RD, 2, read },
};
-
+
if ( (1 != i2c_transfer(client->adapter,&reset[0],1)) ||
(1 != i2c_transfer(client->adapter,&reset[1],1)) ||
(2 != i2c_transfer(client->adapter,test,2)) ) {
printk(KERN_ERR "msp3400: chip reset failed\n");
return -1;
}
- return 0;
+ return 0;
}
static int
@@ -198,7 +205,7 @@
msp3400c_reset(client);
return -1;
}
- return read[0] << 8 | read[1];
+ return read[0] << 8 | read[1];
}
static int
@@ -303,15 +310,15 @@
static struct CARRIER_DETECT carrier_detect_main[] = {
/* main carrier */
- { MSP_CARRIER(4.5), "4.5 NTSC" },
- { MSP_CARRIER(5.5), "5.5 PAL B/G" },
+ { MSP_CARRIER(4.5), "4.5 NTSC" },
+ { MSP_CARRIER(5.5), "5.5 PAL B/G" },
{ MSP_CARRIER(6.0), "6.0 PAL I" },
{ MSP_CARRIER(6.5), "6.5 PAL D/K + SAT + SECAM" }
};
static struct CARRIER_DETECT carrier_detect_55[] = {
/* PAL B/G */
- { MSP_CARRIER(5.7421875), "5.742 PAL B/G FM-stereo" },
+ { MSP_CARRIER(5.7421875), "5.742 PAL B/G FM-stereo" },
{ MSP_CARRIER(5.85), "5.85 PAL B/G NICAM" }
};
@@ -329,16 +336,6 @@
/* ----------------------------------------------------------------------- */
-#define SCART_MASK 0
-#define SCART_IN1 1
-#define SCART_IN2 2
-#define SCART_IN1_DA 3
-#define SCART_IN2_DA 4
-#define SCART_IN3 5
-#define SCART_IN4 6
-#define SCART_MONO 7
-#define SCART_MUTE 8
-
static int scarts[3][9] = {
/* MASK IN1 IN2 IN1_DA IN2_DA IN3 IN4 MONO MUTE */
{ 0x0320, 0x0000, 0x0200, -1, -1, 0x0300, 0x0020, 0x0100, 0x0320 },
@@ -392,8 +389,8 @@
muted ? "on" : "off", volume, balance, val>>8, bal);
msp3400c_write(client,I2C_MSP3400C_DFP, 0x0000, val); /* loudspeaker */
msp3400c_write(client,I2C_MSP3400C_DFP, 0x0006, val); /* headphones */
- /* scart - on/off only */
- msp3400c_write(client,I2C_MSP3400C_DFP, 0x0007, val ? 0x4000 : 0);
+ msp3400c_write(client,I2C_MSP3400C_DFP, 0x0007,
+ muted ? 0x01 : (val | 0x01));
msp3400c_write(client,I2C_MSP3400C_DFP, 0x0001, bal << 8);
}
@@ -417,31 +414,32 @@
{
struct msp3400c *msp = i2c_get_clientdata(client);
int i;
-
+
dprintk(KERN_DEBUG "msp3400: setmode: %d\n",type);
- msp->mode = type;
- msp->stereo = VIDEO_SOUND_MONO;
+ msp->mode = type;
+ msp->audmode = V4L2_TUNER_MODE_MONO;
+ msp->rxsubchans = V4L2_TUNER_SUB_MONO;
msp3400c_write(client,I2C_MSP3400C_DEM, 0x00bb, /* ad_cv */
msp_init_data[type].ad_cv);
-
+
for (i = 5; i >= 0; i--) /* fir 1 */
msp3400c_write(client,I2C_MSP3400C_DEM, 0x0001,
msp_init_data[type].fir1[i]);
-
+
msp3400c_write(client,I2C_MSP3400C_DEM, 0x0005, 0x0004); /* fir 2 */
msp3400c_write(client,I2C_MSP3400C_DEM, 0x0005, 0x0040);
msp3400c_write(client,I2C_MSP3400C_DEM, 0x0005, 0x0000);
for (i = 5; i >= 0; i--)
msp3400c_write(client,I2C_MSP3400C_DEM, 0x0005,
msp_init_data[type].fir2[i]);
-
+
msp3400c_write(client,I2C_MSP3400C_DEM, 0x0083, /* MODE_REG */
msp_init_data[type].mode_reg);
-
+
msp3400c_setcarrier(client, msp_init_data[type].cdo1,
msp_init_data[type].cdo2);
-
+
msp3400c_write(client,I2C_MSP3400C_DEM, 0x0056, 0); /*LOAD_REG_1/2*/
if (dolby) {
@@ -470,51 +468,67 @@
}
}
+static int best_audio_mode(int rxsubchans)
+{
+ if (rxsubchans & V4L2_TUNER_SUB_STEREO)
+ return V4L2_TUNER_MODE_STEREO;
+ if (rxsubchans & V4L2_TUNER_SUB_LANG1)
+ return V4L2_TUNER_MODE_LANG1;
+ if (rxsubchans & V4L2_TUNER_SUB_LANG2)
+ return V4L2_TUNER_MODE_LANG2;
+ return V4L2_TUNER_MODE_MONO;
+}
+
/* turn on/off nicam + stereo */
-static void msp3400c_setstereo(struct i2c_client *client, int mode)
+static void msp3400c_set_audmode(struct i2c_client *client, int audmode)
{
static char *strmode[16] = {
#if __GNUC__ >= 3
- [ 0 ... 15 ] = "invalid",
+ [ 0 ... 15 ] = "invalid",
#endif
- [ VIDEO_SOUND_MONO ] = "mono",
- [ VIDEO_SOUND_STEREO ] = "stereo",
- [ VIDEO_SOUND_LANG1 ] = "lang1",
- [ VIDEO_SOUND_LANG2 ] = "lang2",
+ [ V4L2_TUNER_MODE_MONO ] = "mono",
+ [ V4L2_TUNER_MODE_STEREO ] = "stereo",
+ [ V4L2_TUNER_MODE_LANG1 ] = "lang1",
+ [ V4L2_TUNER_MODE_LANG2 ] = "lang2",
};
struct msp3400c *msp = i2c_get_clientdata(client);
int nicam=0; /* channel source: FM/AM or nicam */
int src=0;
+ BUG_ON(msp->opmode == OPMODE_SIMPLER);
+ msp->audmode = audmode;
+
/* switch demodulator */
switch (msp->mode) {
case MSP_MODE_FM_TERRA:
- dprintk(KERN_DEBUG "msp3400: FM setstereo: %s\n",strmode[mode]);
+ dprintk(KERN_DEBUG "msp3400: FM setstereo: %s\n",
+ strmode[audmode]);
msp3400c_setcarrier(client,msp->second,msp->main);
- switch (mode) {
- case VIDEO_SOUND_STEREO:
+ switch (audmode) {
+ case V4L2_TUNER_MODE_STEREO:
msp3400c_write(client,I2C_MSP3400C_DFP, 0x000e, 0x3001);
break;
- case VIDEO_SOUND_MONO:
- case VIDEO_SOUND_LANG1:
- case VIDEO_SOUND_LANG2:
+ case V4L2_TUNER_MODE_MONO:
+ case V4L2_TUNER_MODE_LANG1:
+ case V4L2_TUNER_MODE_LANG2:
msp3400c_write(client,I2C_MSP3400C_DFP, 0x000e, 0x3000);
break;
}
break;
case MSP_MODE_FM_SAT:
- dprintk(KERN_DEBUG "msp3400: SAT setstereo: %s\n",strmode[mode]);
- switch (mode) {
- case VIDEO_SOUND_MONO:
+ dprintk(KERN_DEBUG "msp3400: SAT setstereo: %s\n",
+ strmode[audmode]);
+ switch (audmode) {
+ case V4L2_TUNER_MODE_MONO:
msp3400c_setcarrier(client, MSP_CARRIER(6.5), MSP_CARRIER(6.5));
break;
- case VIDEO_SOUND_STEREO:
+ case V4L2_TUNER_MODE_STEREO:
msp3400c_setcarrier(client, MSP_CARRIER(7.2), MSP_CARRIER(7.02));
break;
- case VIDEO_SOUND_LANG1:
+ case V4L2_TUNER_MODE_LANG1:
msp3400c_setcarrier(client, MSP_CARRIER(7.38), MSP_CARRIER(7.02));
break;
- case VIDEO_SOUND_LANG2:
+ case V4L2_TUNER_MODE_LANG2:
msp3400c_setcarrier(client, MSP_CARRIER(7.38), MSP_CARRIER(7.02));
break;
}
@@ -522,21 +536,25 @@
case MSP_MODE_FM_NICAM1:
case MSP_MODE_FM_NICAM2:
case MSP_MODE_AM_NICAM:
- dprintk(KERN_DEBUG "msp3400: NICAM setstereo: %s\n",strmode[mode]);
+ dprintk(KERN_DEBUG "msp3400: NICAM setstereo: %s\n",
+ strmode[audmode]);
msp3400c_setcarrier(client,msp->second,msp->main);
if (msp->nicam_on)
nicam=0x0100;
break;
case MSP_MODE_BTSC:
- dprintk(KERN_DEBUG "msp3400: BTSC setstereo: %s\n",strmode[mode]);
+ dprintk(KERN_DEBUG "msp3400: BTSC setstereo: %s\n",
+ strmode[audmode]);
nicam=0x0300;
break;
case MSP_MODE_EXTERN:
- dprintk(KERN_DEBUG "msp3400: extern setstereo: %s\n",strmode[mode]);
+ dprintk(KERN_DEBUG "msp3400: extern setstereo: %s\n",
+ strmode[audmode]);
nicam = 0x0200;
break;
case MSP_MODE_FM_RADIO:
- dprintk(KERN_DEBUG "msp3400: FM-Radio setstereo: %s\n",strmode[mode]);
+ dprintk(KERN_DEBUG "msp3400: FM-Radio setstereo: %s\n",
+ strmode[audmode]);
break;
default:
dprintk(KERN_DEBUG "msp3400: mono setstereo\n");
@@ -544,15 +562,15 @@
}
/* switch audio */
- switch (mode) {
- case VIDEO_SOUND_STEREO:
+ switch (audmode) {
+ case V4L2_TUNER_MODE_STEREO:
src = 0x0020 | nicam;
-#if 0
+#if 0
/* spatial effect */
msp3400c_write(client,I2C_MSP3400C_DFP, 0x0005,0x4000);
#endif
break;
- case VIDEO_SOUND_MONO:
+ case V4L2_TUNER_MODE_MONO:
if (msp->mode == MSP_MODE_AM_NICAM) {
dprintk("msp3400: switching to AM mono\n");
/* AM mono decoding is handled by tuner, not MSP chip */
@@ -561,10 +579,10 @@
src = 0x0200;
break;
}
- case VIDEO_SOUND_LANG1:
+ case V4L2_TUNER_MODE_LANG1:
src = 0x0000 | nicam;
break;
- case VIDEO_SOUND_LANG2:
+ case V4L2_TUNER_MODE_LANG2:
src = 0x0010 | nicam;
break;
}
@@ -608,19 +626,6 @@
}
}
-static void
-msp3400c_restore_dfp(struct i2c_client *client)
-{
- struct msp3400c *msp = i2c_get_clientdata(client);
- int i;
-
- for (i = 0; i < DFP_COUNT; i++) {
- if (-1 == msp->dfp_regs[i])
- continue;
- msp3400c_write(client,I2C_MSP3400C_DFP, i, msp->dfp_regs[i]);
- }
-}
-
/* ----------------------------------------------------------------------- */
struct REGISTER_DUMP {
@@ -641,8 +646,8 @@
{
struct msp3400c *msp = i2c_get_clientdata(client);
int val;
- int newstereo = msp->stereo;
- int newnicam = msp->nicam_on;
+ int rxsubchans = msp->rxsubchans;
+ int newnicam = msp->nicam_on;
int update = 0;
switch (msp->mode) {
@@ -653,11 +658,11 @@
dprintk(KERN_DEBUG
"msp34xx: stereo detect register: %d\n",val);
if (val > 4096) {
- newstereo = VIDEO_SOUND_STEREO | VIDEO_SOUND_MONO;
+ rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO;
} else if (val < -4096) {
- newstereo = VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
+ rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
} else {
- newstereo = VIDEO_SOUND_MONO;
+ rxsubchans = V4L2_TUNER_SUB_MONO;
}
newnicam = 0;
break;
@@ -674,27 +679,27 @@
switch ((val & 0x1e) >> 1) {
case 0:
case 8:
- newstereo = VIDEO_SOUND_STEREO;
+ rxsubchans = V4L2_TUNER_SUB_STEREO;
break;
case 1:
case 9:
- newstereo = VIDEO_SOUND_MONO
- | VIDEO_SOUND_LANG1;
+ rxsubchans = V4L2_TUNER_SUB_MONO
+ | V4L2_TUNER_SUB_LANG1;
break;
case 2:
case 10:
- newstereo = VIDEO_SOUND_MONO
- | VIDEO_SOUND_LANG1
- | VIDEO_SOUND_LANG2;
+ rxsubchans = V4L2_TUNER_SUB_MONO
+ | V4L2_TUNER_SUB_LANG1
+ | V4L2_TUNER_SUB_LANG2;
break;
default:
- newstereo = VIDEO_SOUND_MONO;
+ rxsubchans = V4L2_TUNER_SUB_MONO;
break;
}
newnicam=1;
} else {
newnicam = 0;
- newstereo = VIDEO_SOUND_MONO;
+ rxsubchans = V4L2_TUNER_SUB_MONO;
}
break;
case MSP_MODE_BTSC:
@@ -707,16 +712,16 @@
(val & 0x0040) ? "stereo" : "mono",
(val & 0x0080) ? ", nicam 2nd mono" : "",
(val & 0x0100) ? ", bilingual/SAP" : "");
- newstereo = VIDEO_SOUND_MONO;
- if (val & 0x0040) newstereo |= VIDEO_SOUND_STEREO;
- if (val & 0x0100) newstereo |= VIDEO_SOUND_LANG1;
+ rxsubchans = V4L2_TUNER_SUB_MONO;
+ if (val & 0x0040) rxsubchans |= V4L2_TUNER_SUB_STEREO;
+ if (val & 0x0100) rxsubchans |= V4L2_TUNER_SUB_LANG1;
break;
}
- if (newstereo != msp->stereo) {
+ if (rxsubchans != msp->rxsubchans) {
update = 1;
- dprintk(KERN_DEBUG "msp34xx: watch: stereo %d => %d\n",
- msp->stereo,newstereo);
- msp->stereo = newstereo;
+ dprintk(KERN_DEBUG "msp34xx: watch: rxsubchans %d => %d\n",
+ msp->rxsubchans,rxsubchans);
+ msp->rxsubchans = rxsubchans;
}
if (newnicam != msp->nicam_on) {
update = 1;
@@ -737,22 +742,24 @@
DECLARE_WAITQUEUE(wait, current);
add_wait_queue(&msp->wq, &wait);
- if (!msp->rmmod) {
- set_current_state(TASK_INTERRUPTIBLE);
- if (timeout < 0)
+ if (!kthread_should_stop()) {
+ if (timeout < 0) {
+ set_current_state(TASK_INTERRUPTIBLE);
schedule();
- else
- schedule_timeout(timeout);
+ } else {
+#if 0
+ /* hmm, that one doesn't return on wakeup ... */
+ msleep_interruptible(timeout);
+#else
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(msecs_to_jiffies(timeout));
+#endif
+ }
}
+ if (current->flags & PF_FREEZE)
+ refrigerator(PF_FREEZE);
remove_wait_queue(&msp->wq, &wait);
- return msp->rmmod || signal_pending(current);
-}
-
-static void msp3400c_stereo_wake(unsigned long data)
-{
- struct msp3400c *msp = (struct msp3400c*)data; /* XXX alpha ??? */
-
- wake_up_interruptible(&msp->wq);
+ return msp->restart;
}
/* stereo/multilang monitoring */
@@ -760,53 +767,31 @@
{
struct msp3400c *msp = i2c_get_clientdata(client);
- if (autodetect_stereo(client)) {
- if (msp->stereo & VIDEO_SOUND_STEREO)
- msp3400c_setstereo(client,VIDEO_SOUND_STEREO);
- else if (msp->stereo & VIDEO_SOUND_LANG1)
- msp3400c_setstereo(client,VIDEO_SOUND_LANG1);
- else if (msp->stereo & VIDEO_SOUND_LANG2)
- msp3400c_setstereo(client,VIDEO_SOUND_LANG2);
- else
- msp3400c_setstereo(client,VIDEO_SOUND_MONO);
- }
+ if (autodetect_stereo(client))
+ msp3400c_set_audmode(client,best_audio_mode(msp->rxsubchans));
if (once)
msp->watch_stereo = 0;
- if (msp->watch_stereo)
- mod_timer(&msp->wake_stereo, jiffies+5*HZ);
}
static int msp3400c_thread(void *data)
{
struct i2c_client *client = data;
struct msp3400c *msp = i2c_get_clientdata(client);
-
struct CARRIER_DETECT *cd;
int count, max1,max2,val1,val2, val,this;
-
- daemonize("msp3400");
- allow_signal(SIGTERM);
- printk("msp3400: daemon started\n");
+ printk("msp3400: kthread started\n");
for (;;) {
d2printk("msp3400: thread: sleep\n");
- if (msp34xx_sleep(msp,-1))
- goto done;
-
+ msp34xx_sleep(msp,-1);
d2printk("msp3400: thread: wakeup\n");
- msp->active = 1;
- if (msp->watch_stereo) {
- watch_stereo(client);
- msp->active = 0;
- continue;
- }
-
- /* some time for the tuner to sync */
- if (msp34xx_sleep(msp,HZ/5))
- goto done;
-
restart:
+ dprintk("msp3410: thread: restart scan\n");
+ msp->restart = 0;
+ if (kthread_should_stop())
+ break;
+
if (VIDEO_MODE_RADIO == msp->norm ||
MSP_MODE_EXTERN == msp->mode) {
/* no carrier scan, just unmute */
@@ -815,14 +800,18 @@
msp->volume, msp->balance);
continue;
}
- msp->restart = 0;
+
+ /* mute */
msp3400c_setvolume(client, msp->muted, 0, 0);
msp3400c_setmode(client, MSP_MODE_AM_DETECT /* +1 */ );
val1 = val2 = 0;
max1 = max2 = -1;
- del_timer(&msp->wake_stereo);
msp->watch_stereo = 0;
+ /* some time for the tuner to sync */
+ if (msp34xx_sleep(msp,200))
+ goto restart;
+
/* carrier detect pass #1 -- main carrier */
cd = carrier_detect_main; count = CARRIER_COUNT(carrier_detect_main);
@@ -835,12 +824,8 @@
for (this = 0; this < count; this++) {
msp3400c_setcarrier(client, cd[this].cdo,cd[this].cdo);
-
- if (msp34xx_sleep(msp,HZ/10))
- goto done;
- if (msp->restart)
- msp->restart = 0;
-
+ if (msp34xx_sleep(msp,100))
+ goto restart;
val = msp3400c_read(client, I2C_MSP3400C_DFP, 0x1b);
if (val > 32767)
val -= 65536;
@@ -848,14 +833,16 @@
val1 = val, max1 = this;
dprintk("msp3400: carrier1 val: %5d / %s\n", val,cd[this].name);
}
-
+
/* carrier detect pass #2 -- second (stereo) carrier */
switch (max1) {
case 1: /* 5.5 */
- cd = carrier_detect_55; count = CARRIER_COUNT(carrier_detect_55);
+ cd = carrier_detect_55;
+ count = CARRIER_COUNT(carrier_detect_55);
break;
case 3: /* 6.5 */
- cd = carrier_detect_65; count = CARRIER_COUNT(carrier_detect_65);
+ cd = carrier_detect_65;
+ count = CARRIER_COUNT(carrier_detect_65);
break;
case 0: /* 4.5 */
case 2: /* 6.0 */
@@ -863,19 +850,15 @@
cd = NULL; count = 0;
break;
}
-
+
if (amsound && (msp->norm == VIDEO_MODE_SECAM)) {
/* autodetect doesn't work well with AM ... */
cd = NULL; count = 0; max2 = 0;
}
for (this = 0; this < count; this++) {
msp3400c_setcarrier(client, cd[this].cdo,cd[this].cdo);
-
- if (msp34xx_sleep(msp,HZ/10))
- goto done;
- if (msp->restart)
+ if (msp34xx_sleep(msp,100))
goto restart;
-
val = msp3400c_read(client, I2C_MSP3400C_DFP, 0x1b);
if (val > 32767)
val -= 65536;
@@ -893,7 +876,7 @@
msp->second = carrier_detect_55[max2].cdo;
msp3400c_setmode(client, MSP_MODE_FM_TERRA);
msp->nicam_on = 0;
- msp3400c_setstereo(client, VIDEO_SOUND_MONO);
+ msp3400c_set_audmode(client, V4L2_TUNER_MODE_MONO);
msp->watch_stereo = 1;
} else if (max2 == 1 && HAVE_NICAM(msp)) {
/* B/G NICAM */
@@ -920,7 +903,7 @@
msp->second = carrier_detect_65[max2].cdo;
msp3400c_setmode(client, MSP_MODE_FM_TERRA);
msp->nicam_on = 0;
- msp3400c_setstereo(client, VIDEO_SOUND_MONO);
+ msp3400c_set_audmode(client, V4L2_TUNER_MODE_MONO);
msp->watch_stereo = 1;
} else if (max2 == 0 &&
msp->norm == VIDEO_MODE_SECAM) {
@@ -928,7 +911,7 @@
msp->second = carrier_detect_65[max2].cdo;
msp3400c_setmode(client, MSP_MODE_AM_NICAM);
msp->nicam_on = 0;
- msp3400c_setstereo(client, VIDEO_SOUND_MONO);
+ msp3400c_set_audmode(client, V4L2_TUNER_MODE_MONO);
msp3400c_setcarrier(client, msp->second, msp->main);
/* volume prescale for SCART (AM mono input) */
msp3400c_write(client,I2C_MSP3400C_DFP, 0x000d, 0x1900);
@@ -951,29 +934,26 @@
msp3400c_setmode(client, MSP_MODE_FM_TERRA);
msp->nicam_on = 0;
msp3400c_setcarrier(client, msp->second, msp->main);
- msp->stereo = VIDEO_SOUND_MONO;
- msp3400c_setstereo(client, VIDEO_SOUND_MONO);
+ msp->rxsubchans = V4L2_TUNER_SUB_MONO;
+ msp3400c_set_audmode(client, V4L2_TUNER_MODE_MONO);
break;
}
- /* unmute + restore dfp registers */
+ /* unmute */
msp3400c_setvolume(client, msp->muted,
msp->volume, msp->balance);
- msp3400c_restore_dfp(client);
-
- if (msp->watch_stereo)
- mod_timer(&msp->wake_stereo, jiffies+5*HZ);
-
if (debug)
msp3400c_print_mode(msp);
-
- msp->active = 0;
- }
-done:
- msp->active = 0;
+ /* monitor tv audio mode */
+ while (msp->watch_stereo) {
+ if (msp34xx_sleep(msp,5000))
+ goto restart;
+ watch_stereo(client);
+ }
+ }
dprintk(KERN_DEBUG "msp3400: thread: exit\n");
- complete_and_exit(&msp->texit, 0);
+ return 0;
}
/* ----------------------------------------------------------------------- */
@@ -1006,36 +986,68 @@
{ 0x0060, MSP_CARRIER(7.2), MSP_CARRIER(7.2), "7.2 SAT ADR" },
{ -1, 0, 0, NULL }, /* EOF */
};
-
+
+static inline const char *msp34xx_standard_mode_name(int mode)
+{
+ int i;
+ for (i = 0; modelist[i].name != NULL; i++)
+ if (modelist[i].retval == mode)
+ return modelist[i].name;
+ return "unknown";
+}
+
+static int msp34xx_modus(int norm)
+{
+ switch (norm) {
+ case VIDEO_MODE_PAL:
+ return 0x1003;
+ case VIDEO_MODE_NTSC: /* BTSC */
+ return 0x2003;
+ case VIDEO_MODE_SECAM:
+ return 0x0003;
+ case VIDEO_MODE_RADIO:
+ return 0x0003;
+ case VIDEO_MODE_AUTO:
+ return 0x2003;
+ default:
+ return 0x0003;
+ }
+}
+
+static int msp34xx_standard(int norm)
+{
+ switch (norm) {
+ case VIDEO_MODE_PAL:
+ return 1;
+ case VIDEO_MODE_NTSC: /* BTSC */
+ return 0x0020;
+ case VIDEO_MODE_SECAM:
+ return 1;
+ case VIDEO_MODE_RADIO:
+ return 0x0040;
+ default:
+ return 1;
+ }
+}
+
static int msp3410d_thread(void *data)
{
struct i2c_client *client = data;
struct msp3400c *msp = i2c_get_clientdata(client);
int mode,val,i,std;
-
- daemonize("msp3410 [auto]");
- allow_signal(SIGTERM);
- printk("msp3410: daemon started\n");
+ printk("msp3410: daemon started\n");
for (;;) {
d2printk(KERN_DEBUG "msp3410: thread: sleep\n");
- if (msp34xx_sleep(msp,-1))
- goto done;
-
+ msp34xx_sleep(msp,-1);
d2printk(KERN_DEBUG "msp3410: thread: wakeup\n");
- msp->active = 1;
-
- if (msp->watch_stereo) {
- watch_stereo(client);
- msp->active = 0;
- continue;
- }
-
- /* some time for the tuner to sync */
- if (msp34xx_sleep(msp,HZ/5))
- goto done;
restart:
+ dprintk("msp3410: thread: restart scan\n");
+ msp->restart = 0;
+ if (kthread_should_stop())
+ break;
+
if (msp->mode == MSP_MODE_EXTERN) {
/* no carrier scan needed, just unmute */
dprintk(KERN_DEBUG "msp3410: thread: no carrier scan\n");
@@ -1043,47 +1055,24 @@
msp->volume, msp->balance);
continue;
}
- msp->restart = 0;
- del_timer(&msp->wake_stereo);
- msp->watch_stereo = 0;
/* put into sane state (and mute) */
msp3400c_reset(client);
+ /* some time for the tuner to sync */
+ if (msp34xx_sleep(msp,200))
+ goto restart;
+
/* start autodetect */
- switch (msp->norm) {
- case VIDEO_MODE_PAL:
- mode = 0x1003;
- std = 1;
- break;
- case VIDEO_MODE_NTSC: /* BTSC */
- mode = 0x2003;
- std = 0x0020;
- break;
- case VIDEO_MODE_SECAM:
- mode = 0x0003;
- std = 1;
- break;
- case VIDEO_MODE_RADIO:
- mode = 0x0003;
- std = 0x0040;
- break;
- default:
- mode = 0x0003;
- std = 1;
- break;
- }
+ mode = msp34xx_modus(msp->norm);
+ std = msp34xx_standard(msp->norm);
msp3400c_write(client, I2C_MSP3400C_DEM, 0x30, mode);
msp3400c_write(client, I2C_MSP3400C_DEM, 0x20, std);
+ msp->watch_stereo = 0;
- if (debug) {
- int i;
- for (i = 0; modelist[i].name != NULL; i++)
- if (modelist[i].retval == std)
- break;
+ if (debug)
printk(KERN_DEBUG "msp3410: setting mode: %s (0x%04x)\n",
- modelist[i].name ? modelist[i].name : "unknown",std);
- }
+ msp34xx_standard_mode_name(std) ,std);
if (std != 1) {
/* programmed some specific mode */
@@ -1091,9 +1080,7 @@
} else {
/* triggered autodetect */
for (;;) {
- if (msp34xx_sleep(msp,HZ/10))
- goto done;
- if (msp->restart)
+ if (msp34xx_sleep(msp,100))
goto restart;
/* check results */
@@ -1135,29 +1122,30 @@
else
msp->mode = MSP_MODE_FM_NICAM2;
/* just turn on stereo */
- msp->stereo = VIDEO_SOUND_STEREO;
+ msp->rxsubchans = V4L2_TUNER_SUB_STEREO;
msp->nicam_on = 1;
msp->watch_stereo = 1;
- msp3400c_setstereo(client,VIDEO_SOUND_STEREO);
+ msp3400c_set_audmode(client,V4L2_TUNER_MODE_STEREO);
break;
- case 0x0009:
+ case 0x0009:
msp->mode = MSP_MODE_AM_NICAM;
- msp->stereo = VIDEO_SOUND_MONO;
+ msp->rxsubchans = V4L2_TUNER_SUB_MONO;
msp->nicam_on = 1;
- msp3400c_setstereo(client,VIDEO_SOUND_MONO);
+ msp3400c_set_audmode(client,V4L2_TUNER_MODE_MONO);
msp->watch_stereo = 1;
break;
case 0x0020: /* BTSC */
/* just turn on stereo */
- msp->mode = MSP_MODE_BTSC;
- msp->stereo = VIDEO_SOUND_STEREO;
+ msp->mode = MSP_MODE_BTSC;
+ msp->rxsubchans = V4L2_TUNER_SUB_STEREO;
msp->nicam_on = 0;
msp->watch_stereo = 1;
- msp3400c_setstereo(client,VIDEO_SOUND_STEREO);
+ msp3400c_set_audmode(client,V4L2_TUNER_MODE_STEREO);
break;
case 0x0040: /* FM radio */
msp->mode = MSP_MODE_FM_RADIO;
- msp->stereo = VIDEO_SOUND_STEREO;
+ msp->rxsubchans = V4L2_TUNER_SUB_STEREO;
+ msp->audmode = V4L2_TUNER_MODE_STEREO;
msp->nicam_on = 0;
msp->watch_stereo = 0;
/* not needed in theory if HAVE_RADIO(), but
@@ -1183,50 +1171,276 @@
case 0x0004:
case 0x0005:
msp->mode = MSP_MODE_FM_TERRA;
- msp->stereo = VIDEO_SOUND_MONO;
+ msp->rxsubchans = V4L2_TUNER_SUB_MONO;
+ msp->audmode = V4L2_TUNER_MODE_MONO;
msp->nicam_on = 0;
msp->watch_stereo = 1;
break;
}
-
- /* unmute + restore dfp registers */
+
+ /* unmute, restore misc registers */
msp3400c_setbass(client, msp->bass);
msp3400c_settreble(client, msp->treble);
msp3400c_setvolume(client, msp->muted,
msp->volume, msp->balance);
- msp3400c_restore_dfp(client);
-
- if (msp->watch_stereo)
- mod_timer(&msp->wake_stereo, jiffies+HZ);
+ msp3400c_write(client, I2C_MSP3400C_DFP, 0x0013, msp->acb);
- msp->active = 0;
+ /* monitor tv audio mode */
+ while (msp->watch_stereo) {
+ if (msp34xx_sleep(msp,5000))
+ goto restart;
+ watch_stereo(client);
+ }
}
-
-done:
- msp->active = 0;
dprintk(KERN_DEBUG "msp3410: thread: exit\n");
- complete_and_exit(&msp->texit, 0);
return 0;
}
/* ----------------------------------------------------------------------- */
+/* msp34xxG + (simpler no-thread) */
+/* this one uses both automatic standard detection and automatic sound */
+/* select which are available in the newer G versions */
+/* struct msp: only norm, acb and source are really used in this mode */
+
+static void msp34xxg_set_source(struct i2c_client *client, int source);
+
+/* (re-)initialize the msp34xxg, according to the current norm in msp->norm
+ * return 0 if it worked, -1 if it failed
+ */
+static int msp34xxg_init(struct i2c_client *client)
+{
+ struct msp3400c *msp = i2c_get_clientdata(client);
+ int modus;
+
+ if (msp3400c_reset(client))
+ return -1;
+
+ /* make sure that input/output is muted (paranoid mode) */
+ if (msp3400c_write(client,
+ I2C_MSP3400C_DFP,
+ 0x13, /* ACB */
+ 0x0f20 /* mute DSP input, mute SCART 1 */))
+ return -1;
+
+ /* step-by-step initialisation, as described in the manual */
+ modus = msp34xx_modus(msp->norm);
+ modus &= ~0x03; /* STATUS_CHANGE=0 */
+ modus |= 0x01; /* AUTOMATIC_SOUND_DETECTION=1 */
+ if (msp3400c_write(client,
+ I2C_MSP3400C_DEM,
+ 0x30/*MODUS*/,
+ modus))
+ return -1;
+
+ /* write the dfps that may have an influence on
+ standard/audio autodetection right now */
+ msp34xxg_set_source(client, msp->source);
+
+ if (msp3400c_write(client, I2C_MSP3400C_DFP,
+ 0x0e, /* AM/FM Prescale */
+ 0x3000 /* default: [15:8] 75khz deviation */))
+ return -1;
+
+ if (msp3400c_write(client, I2C_MSP3400C_DFP,
+ 0x10, /* NICAM Prescale */
+ 0x5a00 /* default: 9db gain (as recommended) */))
+ return -1;
+
+ if (msp3400c_write(client,
+ I2C_MSP3400C_DEM,
+ 0x20, /* STANDARD SELECT */
+ standard /* default: 0x01 for automatic standard select*/))
+ return -1;
+ return 0;
+}
+
+static int msp34xxg_thread(void *data)
+{
+ struct i2c_client *client = data;
+ struct msp3400c *msp = i2c_get_clientdata(client);
+ int val, std, i;
+
+ printk("msp34xxg: daemon started\n");
+ for (;;) {
+ d2printk(KERN_DEBUG "msp34xxg: thread: sleep\n");
+ msp34xx_sleep(msp,-1);
+ d2printk(KERN_DEBUG "msp34xxg: thread: wakeup\n");
+
+ restart:
+ dprintk("msp34xxg: thread: restart scan\n");
+ msp->restart = 0;
+ if (kthread_should_stop())
+ break;
+
+ /* setup the chip*/
+ msp34xxg_init(client);
+ std = standard;
+ if (std != 0x01)
+ goto unmute;
+
+ /* watch autodetect */
+ dprintk("msp34xxg: triggered autodetect, waiting for result\n");
+ for (i = 0; i < 10; i++) {
+ if (msp34xx_sleep(msp,100))
+ goto restart;
+
+ /* check results */
+ val = msp3400c_read(client, I2C_MSP3400C_DEM, 0x7e);
+ if (val < 0x07ff) {
+ std = val;
+ break;
+ }
+ dprintk("msp34xxg: detection still in progress\n");
+ }
+ if (0x01 == std) {
+ dprintk("msp34xxg: detection still in progress after 10 tries. giving up.\n");
+ continue;
+ }
+
+ unmute:
+ dprintk("msp34xxg: current mode: %s (0x%04x)\n",
+ msp34xx_standard_mode_name(std), std);
+
+ /* unmute: dispatch sound to scart output, set scart volume */
+ dprintk("msp34xxg: unmute\n");
+
+ msp3400c_setbass(client, msp->bass);
+ msp3400c_settreble(client, msp->treble);
+ msp3400c_setvolume(client, msp->muted, msp->volume, msp->balance);
+
+ /* restore ACB */
+ if (msp3400c_write(client,
+ I2C_MSP3400C_DFP,
+ 0x13, /* ACB */
+ msp->acb))
+ return -1;
+ }
+ dprintk(KERN_DEBUG "msp34xxg: thread: exit\n");
+ return 0;
+}
+
+/* set the same 'source' for the loudspeaker, scart and quasi-peak detector
+ * the value for source is the same as bit 15:8 of DFP registers 0x08,
+ * 0x0a and 0x0c: 0=mono, 1=stereo or A|B, 2=SCART, 3=stereo or A, 4=stereo or B
+ *
+ * this function replaces msp3400c_setstereo
+ */
+static void msp34xxg_set_source(struct i2c_client *client, int source)
+{
+ struct msp3400c *msp = i2c_get_clientdata(client);
+
+ /* fix matrix mode to stereo and let the msp choose what
+ * to output according to 'source', as recommended
+ */
+ int value = (source&0x07)<<8|(source==0 ? 0x00:0x20);
+ dprintk("msp34xxg: set source to %d (0x%x)\n", source, value);
+ msp3400c_write(client,
+ I2C_MSP3400C_DFP,
+ 0x08, /* Loudspeaker Output */
+ value);
+ msp3400c_write(client,
+ I2C_MSP3400C_DFP,
+ 0x0a, /* SCART1 DA Output */
+ value);
+ msp3400c_write(client,
+ I2C_MSP3400C_DFP,
+ 0x0c, /* Quasi-peak detector */
+ value);
+ /*
+ * set identification threshold. Personally, I
+ * I set it to a higher value that the default
+ * of 0x190 to ignore noisy stereo signals.
+ * this needs tuning. (recommended range 0x00a0-0x03c0)
+ * 0x7f0 = forced mono mode
+ */
+ msp3400c_write(client,
+ I2C_MSP3400C_DEM,
+ 0x22, /* a2 threshold for stereo/bilingual */
+ source==0 ? 0x7f0:stereo_threshold);
+ msp->source=source;
+}
+
+static void msp34xxg_detect_stereo(struct i2c_client *client)
+{
+ struct msp3400c *msp = i2c_get_clientdata(client);
+
+ int status = msp3400c_read(client,
+ I2C_MSP3400C_DEM,
+ 0x0200 /* STATUS */);
+ int is_bilingual = status&0x100;
+ int is_stereo = status&0x40;
+
+ msp->rxsubchans = 0;
+ if (is_stereo)
+ msp->rxsubchans |= V4L2_TUNER_SUB_STEREO;
+ else
+ msp->rxsubchans |= V4L2_TUNER_SUB_MONO;
+ if (is_bilingual) {
+ msp->rxsubchans |= V4L2_TUNER_SUB_LANG1|V4L2_TUNER_SUB_LANG2;
+ /* I'm supposed to check whether it's SAP or not
+ * and set only LANG2/SAP in this case. Yet, the MSP
+ * does a lot of work to hide this and handle everything
+ * the same way. I don't want to work around it so unless
+ * this is a problem, I'll handle SAP just like lang1/lang2.
+ */
+ }
+ dprintk("msp34xxg: status=0x%x, stereo=%d, bilingual=%d -> rxsubchans=%d\n",
+ status, is_stereo, is_bilingual, msp->rxsubchans);
+}
+
+static void msp34xxg_set_audmode(struct i2c_client *client, int audmode)
+{
+ struct msp3400c *msp = i2c_get_clientdata(client);
+ int source = 0;
+
+ switch (audmode) {
+ case V4L2_TUNER_MODE_MONO:
+ source=0; /* mono only */
+ break;
+ case V4L2_TUNER_MODE_STEREO:
+ source=1; /* stereo or A|B, see comment in msp34xxg_get_v4l2_stereo() */
+ /* problem: that could also mean 2 (scart input) */
+ break;
+ case V4L2_TUNER_MODE_LANG1:
+ source=3; /* stereo or A */
+ break;
+ case V4L2_TUNER_MODE_LANG2:
+ source=4; /* stereo or B */
+ break;
+ default: /* doing nothing: a safe, sane default */
+ audmode = 0;
+ return;
+ }
+ msp->audmode = audmode;
+ msp34xxg_set_source(client, source);
+}
+
+
+/* ----------------------------------------------------------------------- */
static int msp_attach(struct i2c_adapter *adap, int addr, int kind);
static int msp_detach(struct i2c_client *client);
static int msp_probe(struct i2c_adapter *adap);
static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg);
+static int msp_suspend(struct device * dev, u32 state, u32 level);
+static int msp_resume(struct device * dev, u32 level);
+
static struct i2c_driver driver = {
.owner = THIS_MODULE,
- .name = "i2c msp3400 driver",
+ .name = "i2c msp3400 driver",
.id = I2C_DRIVERID_MSP3400,
.flags = I2C_DF_NOTIFY,
.attach_adapter = msp_probe,
.detach_client = msp_detach,
.command = msp_command,
+ .driver {
+ .suspend = msp_suspend,
+ .resume = msp_resume,
+ },
};
-static struct i2c_client client_template =
+static struct i2c_client client_template =
{
I2C_DEVNAME("(unset)"),
.flags = I2C_CLIENT_ALLOW_USE,
@@ -1237,7 +1451,7 @@
{
struct msp3400c *msp;
struct i2c_client *c;
- int i;
+ int (*thread_func)(void *data) = NULL;
client_template.adapter = adap;
client_template.addr = addr;
@@ -1246,7 +1460,7 @@
dprintk("msp3400: no chip found\n");
return -1;
}
-
+
if (NULL == (c = kmalloc(sizeof(struct i2c_client),GFP_KERNEL)))
return -ENOMEM;
memcpy(c,&client_template,sizeof(struct i2c_client));
@@ -1254,16 +1468,14 @@
kfree(c);
return -ENOMEM;
}
-
+
memset(msp,0,sizeof(struct msp3400c));
- msp->volume = 65535;
+ msp->volume = 58880; /* 0db gain */
msp->balance = 32768;
- msp->bass = 32768;
- msp->treble = 32768;
- msp->input = -1;
- msp->muted = 1;
- for (i = 0; i < DFP_COUNT; i++)
- msp->dfp_regs[i] = -1;
+ msp->bass = 32768;
+ msp->treble = 32768;
+ msp->input = -1;
+ msp->muted = 1;
i2c_set_clientdata(c, msp);
init_waitqueue_head(&msp->wq);
@@ -1274,7 +1486,7 @@
dprintk("msp3400: no chip found\n");
return -1;
}
-
+
msp->rev1 = msp3400c_read(c, I2C_MSP3400C_DFP, 0x1e);
if (-1 != msp->rev1)
msp->rev2 = msp3400c_read(c, I2C_MSP3400C_DFP, 0x1f);
@@ -1295,36 +1507,51 @@
(msp->rev2>>8)&0xff, (msp->rev1&0xff)+'@',
((msp->rev1>>8)&0xff)+'@', msp->rev2&0x1f);
- if (simple == -1) {
- /* default mode */
- msp->simple = HAVE_SIMPLE(msp);
- } else {
- /* use insmod option */
- msp->simple = simple;
+ msp->opmode = opmode;
+ if (OPMODE_AUTO == msp->opmode) {
+ if (HAVE_SIMPLER(msp))
+ msp->opmode = OPMODE_SIMPLER;
+ else if (HAVE_SIMPLE(msp))
+ msp->opmode = OPMODE_SIMPLE;
+ else
+ msp->opmode = OPMODE_MANUAL;
}
- /* timer for stereo checking */
- init_timer(&msp->wake_stereo);
- msp->wake_stereo.function = msp3400c_stereo_wake;
- msp->wake_stereo.data = (unsigned long)msp;
-
/* hello world :-) */
printk(KERN_INFO "msp34xx: init: chip=%s",i2c_clientname(c));
if (HAVE_NICAM(msp))
printk(" +nicam");
if (HAVE_SIMPLE(msp))
printk(" +simple");
+ if (HAVE_SIMPLER(msp))
+ printk(" +simpler");
if (HAVE_RADIO(msp))
printk(" +radio");
+
+ /* version-specific initialization */
+ switch (msp->opmode) {
+ case OPMODE_MANUAL:
+ printk(" mode=manual");
+ thread_func = msp3400c_thread;
+ break;
+ case OPMODE_SIMPLE:
+ printk(" mode=simple");
+ thread_func = msp3410d_thread;
+ break;
+ case OPMODE_SIMPLER:
+ printk(" mode=simpler");
+ thread_func = msp34xxg_thread;
+ break;
+ }
printk("\n");
- /* startup control thread */
- init_completion(&msp->texit);
- msp->tpid = kernel_thread(msp->simple ? msp3410d_thread : msp3400c_thread,
- (void *)c, 0);
- if (msp->tpid < 0)
- printk(KERN_WARNING "msp34xx: kernel_thread() failed\n");
- wake_up_interruptible(&msp->wq);
+ /* startup control thread if needed */
+ if (thread_func) {
+ msp->kthread = kthread_run(thread_func, c, "msp34xx");
+ if (NULL == msp->kthread)
+ printk(KERN_WARNING "msp34xx: kernel_thread() failed\n");
+ wake_up_interruptible(&msp->wq);
+ }
/* done */
i2c_attach_client(c);
@@ -1334,13 +1561,11 @@
static int msp_detach(struct i2c_client *client)
{
struct msp3400c *msp = i2c_get_clientdata(client);
-
+
/* shutdown control thread */
- del_timer_sync(&msp->wake_stereo);
- if (msp->tpid >= 0) {
- msp->rmmod = 1;
- wake_up_interruptible(&msp->wq);
- wait_for_completion(&msp->texit);
+ if (msp->kthread >= 0) {
+ msp->restart = 1;
+ kthread_stop(msp->kthread);
}
msp3400c_reset(client);
@@ -1352,18 +1577,8 @@
static int msp_probe(struct i2c_adapter *adap)
{
-#ifdef I2C_CLASS_TV_ANALOG
if (adap->class & I2C_CLASS_TV_ANALOG)
return i2c_probe(adap, &addr_data, msp_attach);
-#else
- switch (adap->id) {
- case I2C_ALGO_BIT | I2C_HW_SMBUS_VOODOO3:
- case I2C_ALGO_BIT | I2C_HW_B_BT848:
- //case I2C_ALGO_SAA7134:
- return i2c_probe(adap, &addr_data, msp_attach);
- break;
- }
-#endif
return 0;
}
@@ -1371,14 +1586,73 @@
{
struct msp3400c *msp = i2c_get_clientdata(client);
+ if (NULL == msp->kthread)
+ return;
msp3400c_setvolume(client,msp->muted,0,0);
- msp->watch_stereo=0;
- del_timer(&msp->wake_stereo);
- if (msp->active)
- msp->restart = 1;
+ msp->watch_stereo = 0;
+ msp->restart = 1;
wake_up_interruptible(&msp->wq);
}
+/* ----------------------------------------------------------------------- */
+
+static int mode_v4l2_to_v4l1(int rxsubchans)
+{
+ int mode = 0;
+
+ if (rxsubchans & V4L2_TUNER_SUB_STEREO)
+ mode |= VIDEO_SOUND_STEREO;
+ if (rxsubchans & V4L2_TUNER_SUB_LANG2)
+ mode |= VIDEO_SOUND_LANG2;
+ if (rxsubchans & V4L2_TUNER_SUB_LANG1)
+ mode |= VIDEO_SOUND_LANG1;
+ if (0 == mode)
+ mode |= VIDEO_SOUND_MONO;
+ return mode;
+}
+
+static int mode_v4l1_to_v4l2(int mode)
+{
+ if (mode & VIDEO_SOUND_STEREO)
+ return V4L2_TUNER_MODE_STEREO;
+ if (mode & VIDEO_SOUND_LANG2)
+ return V4L2_TUNER_MODE_LANG2;
+ if (mode & VIDEO_SOUND_LANG1)
+ return V4L2_TUNER_MODE_LANG1;
+ return V4L2_TUNER_MODE_MONO;
+}
+
+static void msp_any_detect_stereo(struct i2c_client *client)
+{
+ struct msp3400c *msp = i2c_get_clientdata(client);
+
+ switch (msp->opmode) {
+ case OPMODE_MANUAL:
+ case OPMODE_SIMPLE:
+ autodetect_stereo(client);
+ break;
+ case OPMODE_SIMPLER:
+ msp34xxg_detect_stereo(client);
+ break;
+ }
+}
+
+static void msp_any_set_audmode(struct i2c_client *client, int audmode)
+{
+ struct msp3400c *msp = i2c_get_clientdata(client);
+
+ switch (msp->opmode) {
+ case OPMODE_MANUAL:
+ case OPMODE_SIMPLE:
+ msp->watch_stereo = 0;
+ msp3400c_set_audmode(client, audmode);
+ break;
+ case OPMODE_SIMPLER:
+ msp34xxg_set_audmode(client, audmode);
+ break;
+ }
+}
+
static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg)
{
struct msp3400c *msp = i2c_get_clientdata(client);
@@ -1410,7 +1684,6 @@
break;
case AUDIO_TUNER:
msp->mode = -1;
- msp_wake_thread(client);
break;
default:
if (*sarg & AUDIO_MUTE)
@@ -1418,63 +1691,38 @@
break;
}
if (scart) {
- msp->stereo = VIDEO_SOUND_STEREO;
+ msp->rxsubchans = V4L2_TUNER_SUB_STEREO;
+ msp->audmode = V4L2_TUNER_MODE_STEREO;
msp3400c_set_scart(client,scart,0);
msp3400c_write(client,I2C_MSP3400C_DFP,0x000d,0x1900);
- msp3400c_setstereo(client,msp->stereo);
+ if (msp->opmode != OPMODE_SIMPLER)
+ msp3400c_set_audmode(client, msp->audmode);
}
- if (msp->active)
- msp->restart = 1;
+ msp_wake_thread(client);
break;
case AUDC_SET_RADIO:
dprintk(KERN_DEBUG "msp34xx: AUDC_SET_RADIO\n");
msp->norm = VIDEO_MODE_RADIO;
- msp->watch_stereo=0;
- del_timer(&msp->wake_stereo);
dprintk(KERN_DEBUG "msp34xx: switching to radio mode\n");
- if (msp->simple) {
- /* the thread will do for us */
- msp_wake_thread(client);
- } else {
+ msp->watch_stereo = 0;
+ switch (msp->opmode) {
+ case OPMODE_MANUAL:
/* set msp3400 to FM radio mode */
msp3400c_setmode(client,MSP_MODE_FM_RADIO);
msp3400c_setcarrier(client, MSP_CARRIER(10.7),
MSP_CARRIER(10.7));
msp3400c_setvolume(client, msp->muted,
msp->volume, msp->balance);
+ break;
+ case OPMODE_SIMPLE:
+ case OPMODE_SIMPLER:
+ /* the thread will do for us */
+ msp_wake_thread(client);
+ break;
}
- if (msp->active)
- msp->restart = 1;
break;
-#if 1
- /* work-in-progress: hook to control the DFP registers */
- case MSP_SET_DFPREG:
- {
- struct msp_dfpreg *r = arg;
- unsigned int i;
-
- if (r->reg < 0 || r->reg >= DFP_COUNT)
- return -EINVAL;
- for (i = 0; i < ARRAY_SIZE(bl_dfp); i++)
- if (r->reg == bl_dfp[i])
- return -EINVAL;
- msp->dfp_regs[r->reg] = r->value;
- msp3400c_write(client,I2C_MSP3400C_DFP,r->reg,r->value);
- return 0;
- }
- case MSP_GET_DFPREG:
- {
- struct msp_dfpreg *r = arg;
-
- if (r->reg < 0 || r->reg >= DFP_COUNT)
- return -EINVAL;
- r->value = msp3400c_read(client,I2C_MSP3400C_DFP,r->reg);
- return 0;
- }
-#endif
-
/* --- v4l ioctls --- */
/* take care: bttv does userspace copying, we'll get a
kernel pointer here... */
@@ -1495,10 +1743,8 @@
va->bass = msp->bass;
va->treble = msp->treble;
- if (msp->norm != VIDEO_MODE_RADIO) {
- autodetect_stereo(client);
- va->mode = msp->stereo;
- }
+ msp_any_detect_stereo(client);
+ va->mode = mode_v4l2_to_v4l1(msp->rxsubchans);
break;
}
case VIDIOCSAUDIO:
@@ -1517,23 +1763,22 @@
msp3400c_setbass(client,msp->bass);
msp3400c_settreble(client,msp->treble);
- if (va->mode != 0 && msp->norm != VIDEO_MODE_RADIO) {
- msp->watch_stereo=0;
- del_timer(&msp->wake_stereo);
- msp->stereo = va->mode & 0x0f;
- msp3400c_setstereo(client,va->mode & 0x0f);
- }
+ if (va->mode != 0 && msp->norm != VIDEO_MODE_RADIO)
+ msp_any_set_audmode(client,mode_v4l1_to_v4l2(va->mode));
break;
}
case VIDIOCSCHAN:
{
struct video_channel *vc = arg;
-
+
dprintk(KERN_DEBUG "msp34xx: VIDIOCSCHAN (norm=%d)\n",vc->norm);
msp->norm = vc->norm;
+ msp_wake_thread(client);
break;
}
+
case VIDIOCSFREQ:
+ case VIDIOC_S_FREQUENCY:
{
/* new channel -- kick audio carrier scan */
dprintk(KERN_DEBUG "msp34xx: VIDIOCSFREQ\n");
@@ -1541,6 +1786,39 @@
break;
}
+ /* --- v4l2 ioctls --- */
+ case VIDIOC_G_TUNER:
+ {
+ struct v4l2_tuner *vt = arg;
+
+ msp_any_detect_stereo(client);
+ vt->audmode = msp->audmode;
+ vt->rxsubchans = msp->rxsubchans;
+ vt->capability = V4L2_TUNER_CAP_STEREO |
+ V4L2_TUNER_CAP_LANG1|
+ V4L2_TUNER_CAP_LANG2;
+ break;
+ }
+ case VIDIOC_S_TUNER:
+ {
+ struct v4l2_tuner *vt=(struct v4l2_tuner *)arg;
+
+ /* only set audmode */
+ if (vt->audmode != -1 && vt->audmode != 0)
+ msp_any_set_audmode(client, vt->audmode);
+ break;
+ }
+
+ /* msp34xx specific */
+ case MSP_SET_MATRIX:
+ {
+ struct msp_matrix *mspm = arg;
+
+ dprintk(KERN_DEBUG "msp34xx: MSP_SET_MATRIX\n");
+ msp3400c_set_scart(client, mspm->input, mspm->output);
+ break;
+ }
+
default:
/* nothing */
break;
@@ -1548,6 +1826,24 @@
return 0;
}
+static int msp_suspend(struct device * dev, u32 state, u32 level)
+{
+ struct i2c_client *c = container_of(dev, struct i2c_client, dev);
+
+ dprintk("msp34xx: suspend\n");
+ msp3400c_reset(c);
+ return 0;
+}
+
+static int msp_resume(struct device * dev, u32 level)
+{
+ struct i2c_client *c = container_of(dev, struct i2c_client, dev);
+
+ dprintk("msp34xx: resume\n");
+ msp_wake_thread(c);
+ return 0;
+}
+
/* ----------------------------------------------------------------------- */
static int __init msp3400_init_module(void)
diff -u linux-2.6.9/drivers/media/video/msp3400.h linux/drivers/media/video/msp3400.h
--- linux-2.6.9/drivers/media/video/msp3400.h 2004-10-21 11:45:47.000000000 +0200
+++ linux/drivers/media/video/msp3400.h 2004-10-21 14:57:52.560493622 +0200
@@ -8,7 +8,29 @@
int value;
};
+struct msp_matrix {
+ int input;
+ int output;
+};
+
#define MSP_SET_DFPREG _IOW('m',15,struct msp_dfpreg)
#define MSP_GET_DFPREG _IOW('m',16,struct msp_dfpreg)
+/* ioctl for MSP_SET_MATRIX will have to be registered */
+#define MSP_SET_MATRIX _IOW('m',17,struct msp_matrix)
+
+#define SCART_MASK 0
+#define SCART_IN1 1
+#define SCART_IN2 2
+#define SCART_IN1_DA 3
+#define SCART_IN2_DA 4
+#define SCART_IN3 5
+#define SCART_IN4 6
+#define SCART_MONO 7
+#define SCART_MUTE 8
+
+#define SCART_DSP_IN 0
+#define SCART1_OUT 1
+#define SCART2_OUT 2
+
#endif /* MSP3400_H */
--
return -ENOSIG;