hi all,
just a few reports:
1. zImage in test10 somehow isn't working properly. i have a
zImage sized a bit more than 500kb on my harddrive which hangs at
the loading process (the one showing dots).
i write the image to a floppy, and it boots just fine. if i
recompiled my kernel so the zImage size is around 490kb, the
image gets loaded just fine.
2. pcmcia is still missing from the test* series. it still only
cardbus and no pcmcia. i still have to edit autoconf.h myself
which is working just fine for me.
3. i use ufs to mount my freebsd4 partition, following the
instruction (including read-write support). i can read the
partition, but i can't write. mount(8) shows that the partition
is mounted rw. i also get:
UFS-fs error (device 03:05): ufs_add_entry: internal error
fragoff xxx
just drop me a line if you want me to test bugfix.
imel
> imel96 wrote:
> >
> > hi all,
> >
> > just a few reports:
> >
> > 1. zImage in test10 somehow isn't working
properly. i have a
> > zImage sized a bit more than 500kb on my
harddrive which hangs at
> > the loading process (the one showing dots).
> > i write the image to a floppy, and it boots just
fine. if i
> > recompiled my kernel so the zImage size is
around 490kb, the
> > image gets loaded just fine.
>
> make bzImage
if someone remove zImage. the zImage built just fine.
my problem is the zImage doesn't boot on a harddrive,
while it's working just fine on floppy disk.
imel
----------------------------------------------------
This email was sent using http://webmail.cbn.net.id/