Hello,
x86_64 genapic mechanism should be aware of machines that use physical APIC mode regardless of how many clusters/processors are detected. ACPI 3.0 FADT makes this determination very simple by providing a feature flag "force_apic_physical_destination_mode" to state whether the machine unconditionally uses physical APIC mode. Unisys' next generation x86_64 ES7000 will need to utilize this FADT feature flag in order to boot the x86_64 kernel in the correct APIC mode. This patch has been tested on both x86_64 commodity and ES7000 boxes.
Signed-off-by: Jason Davis <[email protected]>
diff -Naurp linux-2.6.12-rc1-mm4/arch/i386/kernel/acpi/boot.c linux-2.6.12-rc1-mm4-genapic/arch/i386/kernel/acpi/boot.c
--- linux-2.6.12-rc1-mm4/arch/i386/kernel/acpi/boot.c 2005-03-02 02:38:25.000000000 -0500
+++ linux-2.6.12-rc1-mm4-genapic/arch/i386/kernel/acpi/boot.c 2005-03-31 18:15:09.606679144 -0500
@@ -608,6 +608,10 @@ static int __init acpi_parse_fadt(unsign
acpi_fadt.sci_int = fadt->sci_int;
#endif
+ /* initialize rev and apic_phys_dest_mode for x86_64 genapic */
+ acpi_fadt.revision = fadt->revision;
+ acpi_fadt.force_apic_physical_destination_mode = fadt->force_apic_physical_destination_mode;
+
#ifdef CONFIG_X86_PM_TIMER
/* detect the location of the ACPI PM Timer */
if (fadt->revision >= FADT2_REVISION_ID) {
diff -Naurp linux-2.6.12-rc1-mm4/arch/x86_64/kernel/genapic.c linux-2.6.12-rc1-mm4-genapic/arch/x86_64/kernel/genapic.c
--- linux-2.6.12-rc1-mm4/arch/x86_64/kernel/genapic.c 2005-03-02 02:38:37.000000000 -0500
+++ linux-2.6.12-rc1-mm4-genapic/arch/x86_64/kernel/genapic.c 2005-03-31 18:15:09.607678992 -0500
@@ -20,6 +20,10 @@
#include <asm/smp.h>
#include <asm/ipi.h>
+#if defined(CONFIG_ACPI_BUS)
+#include <acpi/acpi_bus.h>
+#endif
+
/* which logical CPU number maps to which CPU (physical APIC ID) */
u8 x86_cpu_to_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
EXPORT_SYMBOL(x86_cpu_to_apicid);
@@ -47,6 +51,18 @@ void __init clustered_apic_check(void)
goto print;
}
+#if defined(CONFIG_ACPI_BUS)
+ /*
+ * Some x86_64 machines use physical APIC mode regardless of how many
+ * procs/clusters are present (x86_64 ES7000 is an example).
+ */
+ if (acpi_fadt.revision > FADT2_REVISION_ID)
+ if (acpi_fadt.force_apic_physical_destination_mode) {
+ genapic = &apic_cluster;
+ goto print;
+ }
+#endif
+
memset(cluster_cnt, 0, sizeof(cluster_cnt));
for (i = 0; i < NR_CPUS; i++) {
On Fri, Apr 01, 2005 at 12:37:27PM -0500, Jason Davis wrote:
> Hello,
>
> x86_64 genapic mechanism should be aware of machines that use physical APIC
> mode regardless of how many clusters/processors are detected. ACPI 3.0 FADT
> makes this determination very simple by providing a feature flag
> "force_apic_physical_destination_mode" to state whether the machine
> unconditionally uses physical APIC mode. Unisys' next generation x86_64
> ES7000 will need to utilize this FADT feature flag in order to boot the
> x86_64 kernel in the correct APIC mode. This patch has been tested on both
> x86_64 commodity and ES7000 boxes.
Patch is ok for me.
-Andi