Fix ST 5481 USB driver
The old driver was not fully adapted to new USB ABI and does not
work.
Signed-off-by: Karsten Keil <[email protected]>
---
drivers/isdn/hisax/st5481.h | 4 +-
drivers/isdn/hisax/st5481_b.c | 22 ++++++++----
drivers/isdn/hisax/st5481_d.c | 26 ++++++++------
drivers/isdn/hisax/st5481_init.c | 4 +-
drivers/isdn/hisax/st5481_usb.c | 70 +++++++++++++++++++++++---------------
5 files changed, 76 insertions(+), 50 deletions(-)
0677b284b827fbac20961037982f2a6459a827a8
diff --git a/drivers/isdn/hisax/st5481.h b/drivers/isdn/hisax/st5481.h
--- a/drivers/isdn/hisax/st5481.h
+++ b/drivers/isdn/hisax/st5481.h
@@ -466,10 +466,10 @@ void st5481_stop(struct st5481_adapter *
#define __debug_variable st5481_debug
#include "hisax_debug.h"
-#ifdef CONFIG_HISAX_DEBUG
-
extern int st5481_debug;
+#ifdef CONFIG_HISAX_DEBUG
+
#define DBG_ISO_PACKET(level,urb) \
if (level & __debug_variable) dump_iso_packet(__FUNCTION__,urb)
diff --git a/drivers/isdn/hisax/st5481_b.c b/drivers/isdn/hisax/st5481_b.c
--- a/drivers/isdn/hisax/st5481_b.c
+++ b/drivers/isdn/hisax/st5481_b.c
@@ -172,14 +172,18 @@ static void usb_b_out_complete(struct ur
test_and_clear_bit(buf_nr, &b_out->busy);
if (unlikely(urb->status < 0)) {
- if (urb->status != -ENOENT && urb->status != -ESHUTDOWN) {
- WARN("urb status %d",urb->status);
- if (b_out->busy == 0) {
- st5481_usb_pipe_reset(adapter, (bcs->channel+1)*2 | USB_DIR_OUT, NULL, NULL);
- }
- } else {
- DBG(1,"urb killed");
- return; // Give up
+ switch (urb->status) {
+ case -ENOENT:
+ case -ESHUTDOWN:
+ case -ECONNRESET:
+ DBG(4,"urb killed status %d", urb->status);
+ return; // Give up
+ default:
+ WARN("urb status %d",urb->status);
+ if (b_out->busy == 0) {
+ st5481_usb_pipe_reset(adapter, (bcs->channel+1)*2 | USB_DIR_OUT, NULL, NULL);
+ }
+ break;
}
}
@@ -205,7 +209,9 @@ static void st5481B_mode(struct st5481_b
bcs->mode = mode;
// Cancel all USB transfers on this B channel
+ b_out->urb[0]->transfer_flags |= URB_ASYNC_UNLINK;
usb_unlink_urb(b_out->urb[0]);
+ b_out->urb[1]->transfer_flags |= URB_ASYNC_UNLINK;
usb_unlink_urb(b_out->urb[1]);
b_out->busy = 0;
diff --git a/drivers/isdn/hisax/st5481_d.c b/drivers/isdn/hisax/st5481_d.c
--- a/drivers/isdn/hisax/st5481_d.c
+++ b/drivers/isdn/hisax/st5481_d.c
@@ -382,16 +382,20 @@ static void usb_d_out_complete(struct ur
test_and_clear_bit(buf_nr, &d_out->busy);
if (unlikely(urb->status < 0)) {
- if (urb->status != -ENOENT && urb->status != -ESHUTDOWN) {
- WARN("urb status %d",urb->status);
- if (d_out->busy == 0) {
- st5481_usb_pipe_reset(adapter, EP_D_OUT | USB_DIR_OUT, fifo_reseted, adapter);
- }
- return;
- } else {
- DBG(1,"urb killed");
- return; // Give up
+ switch (urb->status) {
+ case -ENOENT:
+ case -ESHUTDOWN:
+ case -ECONNRESET:
+ DBG(1,"urb killed status %d", urb->status);
+ break;
+ default:
+ WARN("urb status %d",urb->status);
+ if (d_out->busy == 0) {
+ st5481_usb_pipe_reset(adapter, EP_D_OUT | USB_DIR_OUT, fifo_reseted, adapter);
+ }
+ break;
}
+ return; // Give up
}
FsmEvent(&adapter->d_out.fsm, EV_DOUT_COMPLETE, (void *) buf_nr);
@@ -709,14 +713,14 @@ int st5481_setup_d(struct st5481_adapter
adapter->l1m.fsm = &l1fsm;
adapter->l1m.state = ST_L1_F3;
- adapter->l1m.debug = 1;
+ adapter->l1m.debug = st5481_debug & 0x100;
adapter->l1m.userdata = adapter;
adapter->l1m.printdebug = l1m_debug;
FsmInitTimer(&adapter->l1m, &adapter->timer);
adapter->d_out.fsm.fsm = &dout_fsm;
adapter->d_out.fsm.state = ST_DOUT_NONE;
- adapter->d_out.fsm.debug = 1;
+ adapter->d_out.fsm.debug = st5481_debug & 0x100;
adapter->d_out.fsm.userdata = adapter;
adapter->d_out.fsm.printdebug = dout_debug;
diff --git a/drivers/isdn/hisax/st5481_init.c b/drivers/isdn/hisax/st5481_init.c
--- a/drivers/isdn/hisax/st5481_init.c
+++ b/drivers/isdn/hisax/st5481_init.c
@@ -43,10 +43,10 @@ static int number_of_leds = 2; /*
module_param(number_of_leds, int, 0);
#ifdef CONFIG_HISAX_DEBUG
-static int debug = 0x1;
+static int debug = 0;
module_param(debug, int, 0);
-int st5481_debug;
#endif
+int st5481_debug;
static LIST_HEAD(adapter_list);
diff --git a/drivers/isdn/hisax/st5481_usb.c b/drivers/isdn/hisax/st5481_usb.c
--- a/drivers/isdn/hisax/st5481_usb.c
+++ b/drivers/isdn/hisax/st5481_usb.c
@@ -132,11 +132,15 @@ static void usb_ctrl_complete(struct urb
struct ctrl_msg *ctrl_msg;
if (unlikely(urb->status < 0)) {
- if (urb->status != -ENOENT && urb->status != -ESHUTDOWN) {
- WARN("urb status %d",urb->status);
- } else {
- DBG(1,"urb killed");
- return; // Give up
+ switch (urb->status) {
+ case -ENOENT:
+ case -ESHUTDOWN:
+ case -ECONNRESET:
+ DBG(1,"urb killed status %d", urb->status);
+ return; // Give up
+ default:
+ WARN("urb status %d",urb->status);
+ break;
}
}
@@ -184,22 +188,22 @@ static void usb_int_complete(struct urb
int status;
switch (urb->status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- DBG(1, "urb shutting down with status: %d", urb->status);
- return;
- default:
- WARN("nonzero urb status received: %d", urb->status);
- goto exit;
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ DBG(2, "urb shutting down with status: %d", urb->status);
+ return;
+ default:
+ WARN("nonzero urb status received: %d", urb->status);
+ goto exit;
}
- DBG_PACKET(1, data, INT_PKT_SIZE);
+ DBG_PACKET(2, data, INT_PKT_SIZE);
if (urb->actual_length == 0) {
goto exit;
@@ -250,7 +254,7 @@ int st5481_setup_usb(struct st5481_adapt
struct urb *urb;
u8 *buf;
- DBG(1,"");
+ DBG(2,"");
if ((status = usb_reset_configuration (dev)) < 0) {
WARN("reset_configuration failed,status=%d",status);
@@ -330,15 +334,17 @@ void st5481_release_usb(struct st5481_ad
DBG(1,"");
// Stop and free Control and Interrupt URBs
- usb_unlink_urb(ctrl->urb);
+ usb_kill_urb(ctrl->urb);
if (ctrl->urb->transfer_buffer)
kfree(ctrl->urb->transfer_buffer);
usb_free_urb(ctrl->urb);
+ ctrl->urb = NULL;
- usb_unlink_urb(intr->urb);
+ usb_kill_urb(intr->urb);
if (intr->urb->transfer_buffer)
kfree(intr->urb->transfer_buffer);
usb_free_urb(intr->urb);
+ ctrl->urb = NULL;
}
/*
@@ -406,6 +412,7 @@ fill_isoc_urb(struct urb *urb, struct us
spin_lock_init(&urb->lock);
urb->dev=dev;
urb->pipe=pipe;
+ urb->interval = 1;
urb->transfer_buffer=buf;
urb->number_of_packets = num_packets;
urb->transfer_buffer_length=num_packets*packet_size;
@@ -452,7 +459,9 @@ st5481_setup_isocpipes(struct urb* urb[2
if (urb[j]) {
if (urb[j]->transfer_buffer)
kfree(urb[j]->transfer_buffer);
+ urb[j]->transfer_buffer = NULL;
usb_free_urb(urb[j]);
+ urb[j] = NULL;
}
}
return retval;
@@ -463,10 +472,11 @@ void st5481_release_isocpipes(struct urb
int j;
for (j = 0; j < 2; j++) {
- usb_unlink_urb(urb[j]);
+ usb_kill_urb(urb[j]);
if (urb[j]->transfer_buffer)
kfree(urb[j]->transfer_buffer);
usb_free_urb(urb[j]);
+ urb[j] = NULL;
}
}
@@ -485,11 +495,15 @@ static void usb_in_complete(struct urb *
int len, count, status;
if (unlikely(urb->status < 0)) {
- if (urb->status != -ENOENT && urb->status != -ESHUTDOWN) {
- WARN("urb status %d",urb->status);
- } else {
- DBG(1,"urb killed");
- return; // Give up
+ switch (urb->status) {
+ case -ENOENT:
+ case -ESHUTDOWN:
+ case -ECONNRESET:
+ DBG(1,"urb killed status %d", urb->status);
+ return; // Give up
+ default:
+ WARN("urb status %d",urb->status);
+ break;
}
}
@@ -631,7 +645,9 @@ void st5481_in_mode(struct st5481_in *in
in->mode = mode;
+ in->urb[0]->transfer_flags |= URB_ASYNC_UNLINK;
usb_unlink_urb(in->urb[0]);
+ in->urb[1]->transfer_flags |= URB_ASYNC_UNLINK;
usb_unlink_urb(in->urb[1]);
if (in->mode != L1_MODE_NULL) {
--
Karsten Keil
SuSE Labs
ISDN development
On Sat, Sep 17, 2005 at 11:52:42PM +0200, Karsten Keil wrote:
> // Cancel all USB transfers on this B channel
> + b_out->urb[0]->transfer_flags |= URB_ASYNC_UNLINK;
> usb_unlink_urb(b_out->urb[0]);
> + b_out->urb[1]->transfer_flags |= URB_ASYNC_UNLINK;
URB_ASYNC_UNLINK is now gone in 2.6.14-rc1, so this change will break
the build :(
thanks,
greg k-h
Hi Greg,
On Sat, Sep 17, 2005 at 03:26:40PM -0700, Greg KH wrote:
> On Sat, Sep 17, 2005 at 11:52:42PM +0200, Karsten Keil wrote:
> > // Cancel all USB transfers on this B channel
> > + b_out->urb[0]->transfer_flags |= URB_ASYNC_UNLINK;
> > usb_unlink_urb(b_out->urb[0]);
> > + b_out->urb[1]->transfer_flags |= URB_ASYNC_UNLINK;
>
> URB_ASYNC_UNLINK is now gone in 2.6.14-rc1, so this change will break
> the build :(
>
OK, what would be the correct fix ?
Documentation/usb/URB.txt still point to URB_ASYNC_UNLINK for such cases.
--
Karsten Keil
SuSE Labs
ISDN development
On Mon, Sep 19, 2005 at 04:21:21PM +0200, Karsten Keil wrote:
> Hi Greg,
>
> On Sat, Sep 17, 2005 at 03:26:40PM -0700, Greg KH wrote:
> > On Sat, Sep 17, 2005 at 11:52:42PM +0200, Karsten Keil wrote:
> > > // Cancel all USB transfers on this B channel
> > > + b_out->urb[0]->transfer_flags |= URB_ASYNC_UNLINK;
> > > usb_unlink_urb(b_out->urb[0]);
> > > + b_out->urb[1]->transfer_flags |= URB_ASYNC_UNLINK;
> >
> > URB_ASYNC_UNLINK is now gone in 2.6.14-rc1, so this change will break
> > the build :(
> >
>
> OK, what would be the correct fix ?
Found out myself, that usb_unlink_urb is always async now, so URB_ASYNC_UNLINK is
really obsolete and removing the lines should be enough.
> Documentation/usb/URB.txt still point to URB_ASYNC_UNLINK for such cases.
>
Should be adapted too.
--
Karsten Keil
SuSE Labs
ISDN development