Fix a crash with multipath activated. It happends when ANA log
page is larger than MDTS and because of that ANA is disabled.
When connecting the target, the driver in nvme_parse_ana_log
then tries to access nvme_mpath_init.ctrl->ana_log_buf that is
unallocated. The signature is as follows:
[ 300.433586] nvme nvme0: ANA log page size (8208) larger than MDTS (8192).
[ 300.435387] nvme nvme0: disabling ANA support.
[ 300.437835] nvme nvme0: creating 4 I/O queues.
[ 300.459132] nvme nvme0: new ctrl: NQN "nqn.0.0.0", addr 10.91.0.1:8009
[ 300.464609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[ 300.466342] #PF error: [normal kernel read fault]
[ 300.467385] PGD 0 P4D 0
[ 300.467987] Oops: 0000 [#1] SMP PTI
[ 300.468787] CPU: 3 PID: 50 Comm: kworker/u8:1 Not tainted 5.0.20kalray+ #4
[ 300.470264] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 300.471532] Workqueue: nvme-wq nvme_scan_work [nvme_core]
[ 300.472724] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core]
[ 300.474038] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48
[ 300.477374] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296
[ 300.478334] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000
[ 300.479784] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258
[ 300.481488] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
[ 300.483203] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0
[ 300.484928] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0
[ 300.486626] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000
[ 300.488538] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 300.489907] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0
[ 300.491612] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 300.493303] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 300.494991] Call Trace:
[ 300.495645] nvme_mpath_add_disk+0x5c/0xb0 [nvme_core]
[ 300.496880] nvme_validate_ns+0x2ef/0x550 [nvme_core]
[ 300.498105] ? nvme_identify_ctrl.isra.45+0x6a/0xb0 [nvme_core]
[ 300.499539] nvme_scan_work+0x2b4/0x370 [nvme_core]
[ 300.500717] ? __switch_to_asm+0x35/0x70
[ 300.501663] process_one_work+0x171/0x380
[ 300.502340] worker_thread+0x49/0x3f0
[ 300.503079] kthread+0xf8/0x130
[ 300.503795] ? max_active_store+0x80/0x80
[ 300.504690] ? kthread_bind+0x10/0x10
[ 300.505502] ret_from_fork+0x35/0x40
[ 300.506280] Modules linked in: nvme_tcp nvme_rdma rdma_cm iw_cm ib_cm ib_core nvme_fabrics nvme_core xt_physdev ip6table_raw ip6table_mangle ip6table_filter ip6_tables xt_comment iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_CHECKSUM iptable_mangle iptable_filter veth ebtable_filter ebtable_nat ebtables iptable_raw vxlan ip6_udp_tunnel udp_tunnel sunrpc joydev pcspkr virtio_balloon br_netfilter bridge stp llc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net virtio_console net_failover virtio_blk failover ata_piix serio_raw libata virtio_pci virtio_ring virtio
[ 300.514984] CR2: 0000000000000008
[ 300.515569] ---[ end trace faa2eefad7e7f218 ]---
[ 300.516354] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core]
[ 300.517330] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48
[ 300.520353] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296
[ 300.521229] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000
[ 300.522399] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258
[ 300.523560] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
[ 300.524734] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0
[ 300.525915] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0
[ 300.527084] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000
[ 300.528396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 300.529440] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0
[ 300.530739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 300.531989] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 300.533264] Kernel panic - not syncing: Fatal exception
[ 300.534338] Kernel Offset: 0x17c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[ 300.536227] ---[ end Kernel panic - not syncing: Fatal exception ]---
Signed-off-by: Marta Rybczynska <[email protected]>
Tested-by: Jean-Baptiste Riaux <[email protected]>
---
drivers/nvme/host/multipath.c | 12 ++++++++++--
drivers/nvme/host/nvme.h | 1 +
2 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 499acf0..61dae87 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -12,11 +12,16 @@
MODULE_PARM_DESC(multipath,
"turn on native support for multiple controllers per subsystem");
-inline bool nvme_ctrl_use_ana(struct nvme_ctrl *ctrl)
+inline bool nvme_ctrl_has_ana_cap(struct nvme_ctrl *ctrl)
{
return multipath && ctrl->subsys && (ctrl->subsys->cmic & (1 << 3));
}
+inline bool nvme_ctrl_use_ana(struct nvme_ctrl *ctrl)
+{
+ return nvme_ctrl_has_ana_cap(ctrl) && ctrl->ana_enabled;
+}
+
/*
* If multipathing is enabled we need to always use the subsystem instance
* number for numbering our devices to avoid conflicts between subsystems that
@@ -614,7 +619,7 @@ int nvme_mpath_init(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id)
{
int error;
- if (!nvme_ctrl_use_ana(ctrl))
+ if (!nvme_ctrl_has_ana_cap(ctrl))
return 0;
ctrl->anacap = id->anacap;
@@ -647,6 +652,8 @@ int nvme_mpath_init(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id)
error = nvme_read_ana_log(ctrl, true);
if (error)
goto out_free_ana_log_buf;
+
+ ctrl->ana_enabled = true;
return 0;
out_free_ana_log_buf:
kfree(ctrl->ana_log_buf);
@@ -659,5 +666,6 @@ void nvme_mpath_uninit(struct nvme_ctrl *ctrl)
{
kfree(ctrl->ana_log_buf);
ctrl->ana_log_buf = NULL;
+ ctrl->ana_enabled = false;
}
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 55553d2..8daefeb 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -219,6 +219,7 @@ struct nvme_ctrl {
u8 anatt;
u32 anagrpmax;
u32 nanagrpid;
+ bool ana_enabled;
struct mutex ana_lock;
struct nvme_ana_rsp_hdr *ana_log_buf;
size_t ana_log_size;
--
1.8.3.1
On 7/1/19 12:10 PM, Marta Rybczynska wrote:
> Fix a crash with multipath activated. It happends when ANA log
> page is larger than MDTS and because of that ANA is disabled.
> When connecting the target, the driver in nvme_parse_ana_log
> then tries to access nvme_mpath_init.ctrl->ana_log_buf that is
> unallocated. The signature is as follows:
>
> [ 300.433586] nvme nvme0: ANA log page size (8208) larger than MDTS (8192).
> [ 300.435387] nvme nvme0: disabling ANA support.
> [ 300.437835] nvme nvme0: creating 4 I/O queues.
> [ 300.459132] nvme nvme0: new ctrl: NQN "nqn.0.0.0", addr 10.91.0.1:8009
> [ 300.464609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
> [ 300.466342] #PF error: [normal kernel read fault]
> [ 300.467385] PGD 0 P4D 0
> [ 300.467987] Oops: 0000 [#1] SMP PTI
> [ 300.468787] CPU: 3 PID: 50 Comm: kworker/u8:1 Not tainted 5.0.20kalray+ #4
> [ 300.470264] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
> [ 300.471532] Workqueue: nvme-wq nvme_scan_work [nvme_core]
> [ 300.472724] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core]
> [ 300.474038] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48
> [ 300.477374] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296
> [ 300.478334] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000
> [ 300.479784] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258
> [ 300.481488] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
> [ 300.483203] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0
> [ 300.484928] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0
> [ 300.486626] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000
> [ 300.488538] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 300.489907] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0
> [ 300.491612] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 300.493303] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [ 300.494991] Call Trace:
> [ 300.495645] nvme_mpath_add_disk+0x5c/0xb0 [nvme_core]
> [ 300.496880] nvme_validate_ns+0x2ef/0x550 [nvme_core]
> [ 300.498105] ? nvme_identify_ctrl.isra.45+0x6a/0xb0 [nvme_core]
> [ 300.499539] nvme_scan_work+0x2b4/0x370 [nvme_core]
> [ 300.500717] ? __switch_to_asm+0x35/0x70
> [ 300.501663] process_one_work+0x171/0x380
> [ 300.502340] worker_thread+0x49/0x3f0
> [ 300.503079] kthread+0xf8/0x130
> [ 300.503795] ? max_active_store+0x80/0x80
> [ 300.504690] ? kthread_bind+0x10/0x10
> [ 300.505502] ret_from_fork+0x35/0x40
> [ 300.506280] Modules linked in: nvme_tcp nvme_rdma rdma_cm iw_cm ib_cm ib_core nvme_fabrics nvme_core xt_physdev ip6table_raw ip6table_mangle ip6table_filter ip6_tables xt_comment iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_CHECKSUM iptable_mangle iptable_filter veth ebtable_filter ebtable_nat ebtables iptable_raw vxlan ip6_udp_tunnel udp_tunnel sunrpc joydev pcspkr virtio_balloon br_netfilter bridge stp llc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net virtio_console net_failover virtio_blk failover ata_piix serio_raw libata virtio_pci virtio_ring virtio
> [ 300.514984] CR2: 0000000000000008
> [ 300.515569] ---[ end trace faa2eefad7e7f218 ]---
> [ 300.516354] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core]
> [ 300.517330] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48
> [ 300.520353] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296
> [ 300.521229] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000
> [ 300.522399] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258
> [ 300.523560] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
> [ 300.524734] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0
> [ 300.525915] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0
> [ 300.527084] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000
> [ 300.528396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 300.529440] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0
> [ 300.530739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 300.531989] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [ 300.533264] Kernel panic - not syncing: Fatal exception
> [ 300.534338] Kernel Offset: 0x17c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
> [ 300.536227] ---[ end Kernel panic - not syncing: Fatal exception ]---
>
> Signed-off-by: Marta Rybczynska <[email protected]>
> Tested-by: Jean-Baptiste Riaux <[email protected]>
> ---
> drivers/nvme/host/multipath.c | 12 ++++++++++--
> drivers/nvme/host/nvme.h | 1 +
> 2 files changed, 11 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
> index 499acf0..61dae87 100644
> --- a/drivers/nvme/host/multipath.c
> +++ b/drivers/nvme/host/multipath.c
> @@ -12,11 +12,16 @@
> MODULE_PARM_DESC(multipath,
> "turn on native support for multiple controllers per subsystem");
>
> -inline bool nvme_ctrl_use_ana(struct nvme_ctrl *ctrl)
> +inline bool nvme_ctrl_has_ana_cap(struct nvme_ctrl *ctrl)
> {
> return multipath && ctrl->subsys && (ctrl->subsys->cmic & (1 << 3));
> }
>
> +inline bool nvme_ctrl_use_ana(struct nvme_ctrl *ctrl)
> +{
> + return nvme_ctrl_has_ana_cap(ctrl) && ctrl->ana_enabled;
> +}
> +
> /*
> * If multipathing is enabled we need to always use the subsystem instance
> * number for numbering our devices to avoid conflicts between subsystems that
> @@ -614,7 +619,7 @@ int nvme_mpath_init(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id)
> {
> int error;
>
> - if (!nvme_ctrl_use_ana(ctrl))
> + if (!nvme_ctrl_has_ana_cap(ctrl))
> return 0;
>
> ctrl->anacap = id->anacap;
> @@ -647,6 +652,8 @@ int nvme_mpath_init(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id)
> error = nvme_read_ana_log(ctrl, true);
> if (error)
> goto out_free_ana_log_buf;
> +
> + ctrl->ana_enabled = true;
> return 0;
> out_free_ana_log_buf:
> kfree(ctrl->ana_log_buf);
> @@ -659,5 +666,6 @@ void nvme_mpath_uninit(struct nvme_ctrl *ctrl)
> {
> kfree(ctrl->ana_log_buf);
> ctrl->ana_log_buf = NULL;
> + ctrl->ana_enabled = false;
> }
>
> diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
> index 55553d2..8daefeb 100644
> --- a/drivers/nvme/host/nvme.h
> +++ b/drivers/nvme/host/nvme.h
> @@ -219,6 +219,7 @@ struct nvme_ctrl {
> u8 anatt;
> u32 anagrpmax;
> u32 nanagrpid;
> + bool ana_enabled;
> struct mutex ana_lock;
> struct nvme_ana_rsp_hdr *ana_log_buf;
> size_t ana_log_size;
>
They idea was to use a 'ana_log_buf == NULL' as an indicator that ANA is
disabled, so there is no need to have an additional flag.
Cheers,
Hannes
--
Dr. Hannes Reinecke Teamlead Storage & Networking
[email protected] +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Felix Imendörffer, Mary Higgins, Sri Rasiah
HRB 21284 (AG Nürnberg)
----- On 2 Jul, 2019, at 11:31, Hannes Reinecke [email protected] wrote:
> On 7/1/19 12:10 PM, Marta Rybczynska wrote:
>> Fix a crash with multipath activated. It happends when ANA log
>> page is larger than MDTS and because of that ANA is disabled.
>> When connecting the target, the driver in nvme_parse_ana_log
>> then tries to access nvme_mpath_init.ctrl->ana_log_buf that is
>> unallocated. The signature is as follows:
>>
>> [ 300.433586] nvme nvme0: ANA log page size (8208) larger than MDTS (8192).
>> [ 300.435387] nvme nvme0: disabling ANA support.
>> [ 300.437835] nvme nvme0: creating 4 I/O queues.
>> [ 300.459132] nvme nvme0: new ctrl: NQN "nqn.0.0.0", addr 10.91.0.1:8009
>> [ 300.464609] BUG: unable to handle kernel NULL pointer dereference at
>> 0000000000000008
>> [ 300.466342] #PF error: [normal kernel read fault]
>> [ 300.467385] PGD 0 P4D 0
>> [ 300.467987] Oops: 0000 [#1] SMP PTI
>> [ 300.468787] CPU: 3 PID: 50 Comm: kworker/u8:1 Not tainted 5.0.20kalray+ #4
>> [ 300.470264] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
>> [ 300.471532] Workqueue: nvme-wq nvme_scan_work [nvme_core]
>> [ 300.472724] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core]
>> [ 300.474038] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55
>> 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08
>> 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48
>> [ 300.477374] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296
>> [ 300.478334] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000
>> [ 300.479784] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258
>> [ 300.481488] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
>> [ 300.483203] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0
>> [ 300.484928] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0
>> [ 300.486626] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000)
>> knlGS:0000000000000000
>> [ 300.488538] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>> [ 300.489907] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0
>> [ 300.491612] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>> [ 300.493303] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
>> [ 300.494991] Call Trace:
>> [ 300.495645] nvme_mpath_add_disk+0x5c/0xb0 [nvme_core]
>> [ 300.496880] nvme_validate_ns+0x2ef/0x550 [nvme_core]
>> [ 300.498105] ? nvme_identify_ctrl.isra.45+0x6a/0xb0 [nvme_core]
>> [ 300.499539] nvme_scan_work+0x2b4/0x370 [nvme_core]
>> [ 300.500717] ? __switch_to_asm+0x35/0x70
>> [ 300.501663] process_one_work+0x171/0x380
>> [ 300.502340] worker_thread+0x49/0x3f0
>> [ 300.503079] kthread+0xf8/0x130
>> [ 300.503795] ? max_active_store+0x80/0x80
>> [ 300.504690] ? kthread_bind+0x10/0x10
>> [ 300.505502] ret_from_fork+0x35/0x40
>> [ 300.506280] Modules linked in: nvme_tcp nvme_rdma rdma_cm iw_cm ib_cm ib_core
>> nvme_fabrics nvme_core xt_physdev ip6table_raw ip6table_mangle ip6table_filter
>> ip6_tables xt_comment iptable_nat nf_nat_ipv4 nf_nat nf_conntrack
>> nf_defrag_ipv6 nf_defrag_ipv4 xt_CHECKSUM iptable_mangle iptable_filter veth
>> ebtable_filter ebtable_nat ebtables iptable_raw vxlan ip6_udp_tunnel udp_tunnel
>> sunrpc joydev pcspkr virtio_balloon br_netfilter bridge stp llc ip_tables xfs
>> libcrc32c ata_generic pata_acpi virtio_net virtio_console net_failover
>> virtio_blk failover ata_piix serio_raw libata virtio_pci virtio_ring virtio
>> [ 300.514984] CR2: 0000000000000008
>> [ 300.515569] ---[ end trace faa2eefad7e7f218 ]---
>> [ 300.516354] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core]
>> [ 300.517330] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55
>> 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08
>> 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48
>> [ 300.520353] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296
>> [ 300.521229] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000
>> [ 300.522399] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258
>> [ 300.523560] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
>> [ 300.524734] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0
>> [ 300.525915] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0
>> [ 300.527084] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000)
>> knlGS:0000000000000000
>> [ 300.528396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>> [ 300.529440] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0
>> [ 300.530739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>> [ 300.531989] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
>> [ 300.533264] Kernel panic - not syncing: Fatal exception
>> [ 300.534338] Kernel Offset: 0x17c00000 from 0xffffffff81000000 (relocation
>> range: 0xffffffff80000000-0xffffffffbfffffff)
>> [ 300.536227] ---[ end Kernel panic - not syncing: Fatal exception ]---
>>
>> Signed-off-by: Marta Rybczynska <[email protected]>
>> Tested-by: Jean-Baptiste Riaux <[email protected]>
>> ---
>> drivers/nvme/host/multipath.c | 12 ++++++++++--
>> drivers/nvme/host/nvme.h | 1 +
>> 2 files changed, 11 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
>> index 499acf0..61dae87 100644
>> --- a/drivers/nvme/host/multipath.c
>> +++ b/drivers/nvme/host/multipath.c
>> @@ -12,11 +12,16 @@
>> MODULE_PARM_DESC(multipath,
>> "turn on native support for multiple controllers per subsystem");
>>
>> -inline bool nvme_ctrl_use_ana(struct nvme_ctrl *ctrl)
>> +inline bool nvme_ctrl_has_ana_cap(struct nvme_ctrl *ctrl)
>> {
>> return multipath && ctrl->subsys && (ctrl->subsys->cmic & (1 << 3));
>> }
>>
>> +inline bool nvme_ctrl_use_ana(struct nvme_ctrl *ctrl)
>> +{
>> + return nvme_ctrl_has_ana_cap(ctrl) && ctrl->ana_enabled;
>> +}
>> +
>> /*
>> * If multipathing is enabled we need to always use the subsystem instance
>> * number for numbering our devices to avoid conflicts between subsystems that
>> @@ -614,7 +619,7 @@ int nvme_mpath_init(struct nvme_ctrl *ctrl, struct
>> nvme_id_ctrl *id)
>> {
>> int error;
>>
>> - if (!nvme_ctrl_use_ana(ctrl))
>> + if (!nvme_ctrl_has_ana_cap(ctrl))
>> return 0;
>>
>> ctrl->anacap = id->anacap;
>> @@ -647,6 +652,8 @@ int nvme_mpath_init(struct nvme_ctrl *ctrl, struct
>> nvme_id_ctrl *id)
>> error = nvme_read_ana_log(ctrl, true);
>> if (error)
>> goto out_free_ana_log_buf;
>> +
>> + ctrl->ana_enabled = true;
>> return 0;
>> out_free_ana_log_buf:
>> kfree(ctrl->ana_log_buf);
>> @@ -659,5 +666,6 @@ void nvme_mpath_uninit(struct nvme_ctrl *ctrl)
>> {
>> kfree(ctrl->ana_log_buf);
>> ctrl->ana_log_buf = NULL;
>> + ctrl->ana_enabled = false;
>> }
>>
>> diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
>> index 55553d2..8daefeb 100644
>> --- a/drivers/nvme/host/nvme.h
>> +++ b/drivers/nvme/host/nvme.h
>> @@ -219,6 +219,7 @@ struct nvme_ctrl {
>> u8 anatt;
>> u32 anagrpmax;
>> u32 nanagrpid;
>> + bool ana_enabled;
>> struct mutex ana_lock;
>> struct nvme_ana_rsp_hdr *ana_log_buf;
>> size_t ana_log_size;
>>
> They idea was to use a 'ana_log_buf == NULL' as an indicator that ANA is
> disabled, so there is no need to have an additional flag.
OK, still keeping the split of the helper functions?
Marta
On Tue, Jul 02, 2019 at 11:52:35AM +0200, Marta Rybczynska wrote:
> > They idea was to use a 'ana_log_buf == NULL' as an indicator that ANA is
> > disabled, so there is no need to have an additional flag.
>
> OK, still keeping the split of the helper functions?
I think we can simplify switch nvme_ctrl_use_ana to only check for
->ana_log_buf, and just opencode the actual capabilities check in
the setup path.